Adapter replacement necessary for Equium A300D

Similar Questions

• Replacement battery for Equium A300D - 13 X not recognized

  The original battery was shot while I bought a real Original Toshiba PA3534U-1BRS battery.
  To put it in the laptop, it seems load but still in the corner says "battery not recognized."
  When I take the charger, it says 'unknown '.

  I tried to update my BIOS to see if it would help, do not know if I did it correctly but anyway, he seems to have no effect.

  Any suggestions to fix this or should I send it back?

  Maïwenn.

  E-mail: [[email protected]]

  Hello

  What exactly happens if you unplug the AC adapter?
  The laptop shut down automatically?

  I don't know if the battery calibration may help but it s worth a try.
  The battery must be charged completely and then you must discharge the battery until the cell stops automatically. This should be repeated several times

  If this is not enough, I would recommend another test battery which can be purchased from Toshiba ASP in your country. Guys might provide a compatible part.

• Need drivers Windows XP for Equium A300D - 16 c

  Hello

  I recently bought the Toshiba Equium A300D - 16 c, but I wanted XP but I thought support only in Vista, but you could buy XP and reinstall.

  So I reformatted the PC, installed Windows XP Pro.
  But my main concern is the drivers, where can I get them?

  I looked on the site of Toshiba Driver but it only shows the Vista drivers.
  I have no need of all drivers just the main... can someone tell me where I can get the XP drivers for this model?

  Thank you

  Rowan88

  Hello

  I really wonder you already deleted Vista, Windows XP Home Edition installed without address information on support for Windows XP Home Edition. I also hope that you created the recovery DVDs until you have deleted Vista.

  Back to your problem. Support for Windows XP Home edition for your laptop model can be a bit more problematic. I have laptop AMD too and my phone is not supported WXP. I think that there is not much difference between hardware platforms for Equium, Satellite A300D and P300D.

  Check the Toshiba support site a little and try to install drivers for Satellite to satellite. Maybe you'll have success.

• Audio driver for Equium A300D not working or projection

  No idea how it happened to my computer is a new only 1 week and sound works perfectly well.

  All of a sudden it will use in reading and on computer but not in the record I could play to others on another program for example.

  Equium a300d on vista

  I tried the audio drivers from the Toshiba site, but nothing seems to work.

  Please help :(

  Hello

  If he worked several days ago then I guess this must be a matter of software
  I really put t understand what you exactly do but try to overthrow the BONE until the point of time at the beginning, when this sound function worked correctly.

  A question:
  Did you also check the sound settings in Device Manager?
  Select this check box.

  Go to devices-> sound Manager and check the second tab called record.
  There you have to right click and mark the two peripheral options see the disabled and do not show not connected peripheral.
  Then mark the new recognized audio devices and enable it.

  Further, you should try to update the BIOS because a lot of strange problems can be solved by the BIOS updated.

• Where to find a replacement screen for Equium L10?

  Any advice where to find a replacement screen for it please for the L10?

  Hi neal

  You want to buy a new LCD for the Equium L10?
  Laptop LCD is one of the expensive laptop parts.
  What do you buy a second hand Satellite/Equium L10?

  Many users selling second-hand portable computers and especially the screen functions.
  In my opinion, you should check if you can get a second hand with a LCD unit because especially second hand units are less expensive as a new view.
  But you know, it of your choice.

  PS: Each part, you can get from the authorized Toshiba service point in your country.

• Help needed recovery for Equium A300D - 13 X

  Hi all

  Having experienced too many problems for the list with my satellite a 300 d 13 X, hardware and software, I decided to go ahead with a restore to the factory settings.

  My first step was to create 2 discs recovery DVDs, using the Toshiba Recovery Disk Creator.
  As far as I know, two recovery disks were created with success, insofar as the recovery disc creator has stated as such.

  Not knowing what step to take next, I started the laptop with the fist of the disc in the disc drive, two thinking recovery that it would reset the laptop to its factory settings, but it does not.

  Now, when I start the laptop, I get the following message;

  BOOTMGR is missing
  Press Ctrl + Alt + Delete to restart

  who restarts the laptop showing the above message again.

  By pressing F8 at start up does nothing.

  By pressing F12, multi boot selection, reveals a start with 3 options Menu;
  HDD1: TOSHIBA MK2046GSX-(S1)
  CD/DVD: MAST * ADVD-RAM UJ - 850 S-(PM)
  LAN: Marvell Yukon 88E8040T

  If I select the CD/DVD option, a black screen with the text;

  Windows is loading files

  is shown. I am guessing it is the correct path to recovery.
  However, after the screens following recovery about the language selection utility etc., a text filled with the dialog box

  X:\windows\systems32\cmd.exe

  Cross, but eventually reached a static state line:

  Copy of F:\06948XSP.swm to V:\HDDRecovery\SWImg 1/6

  without to successfully complete the recovery process.

  Any help to fix this would be greatly appreciated.
  Kind regards
  KeV.

  > My first step was to create 2 discs recovery DVDs, using the Toshiba Recovery Disk Creator.
  > As as far as I know, the two recovery disks have been successfully created, insofar as the recovery disc creator has stated as such.

  What to tell buddy you've done everything right.
  The recovery disk was created successfully (you saw a message saying this?).
  Boot from recovery disk should start the collection procedure and you must follow the installation on the screen.
  Usually, this should work.

  The error; BOOTMGR is missing says that boot manager on the HARD disk has been removed and it of not possible to boot from the HARD drive.
  You must boot from the CD you have done; by pressing F12 choose CD/DVD drive

  Try to format the HARD drive using another CD of Windows.
  In this case, you need to set SATA compatibility mode in the BIOS, then you could boot from the WinXP CD.

  After that try the recovery disk again

• Wireless network adapter not available on my Equium A300D

  Hello

  I hope you can help; I currently have the Toshiba Equium A300D laptop. He has a virus and corrupt 1 of my hard drives, I can now t use, however I installed the operating system on my other hard drive, everything was fine until I try 2 connect 2 internet, windows diagnostic the problem and said that he couldn't find the network adapter for my Wi - Fi t.

  Can someone give me help solve this problem?

  Thank you very much

  >.. .couldn t find my Wi - Fi network adapter
  Wireless network card recognized and installed correctly?
  What is the status in Device Manager?

  If everything is OK here I assume card WLAN is not properly enabled. At the first WLAN switch on ON position and then use combination FN + F8 to activate the wireless network card.

• Need a camera for my Equium A300D assistant software

  I have the * Equium A300D laptop computer * and my stupid brother accidentally deleted the soft ware camera wizard! I n t even made a copy of the DVD of the recovery. The settings are not found on my laptop (it must have deleted about 2 months ago!) is there so somewhere I can download this software?

  Help, please! lol Bravo, Katie x

  Hello

  Everything you need you can find on http://eu.computers.toshiba-europe.com > support & downloads.
  Choose your model of laptop, operating system, and you will find driver Webcam for Vista 32 bit.

  If you need assistance more let us know.

• Need drivers of Windows XP Home for my Equium A300D

  Model number - PSAK2E - 001003KS
  Serial - 58316186w

  Hi all!

  I bought an Equium A300D-13 x today and I have taken Vista out of it and installed WXP Home + SP2. All is not well! I still need some drivers, the machine runs on an AMD turion and I can't find the chipset drivers so that he any where! Also his running an AMD graphic card, once more I can't find compatible drivers for it.

  The chipset drivers only available from what I saw was the Intel ones.
  I hope you can help!

  I agree with the master of disaster (by the way; really funny nick: D)
  The satellite series is very similar to the series of satellites and therefore published for the satellite series pilots could operate satellite phone on the computer too.

  It's worth a try!

• How can I get a replacement adapter to recharge for the pencil of Apple?

  I've already lost my charger. How can I get a replacement adapter to recharge for the pencil of Apple?

  If you have lost, you have to pay for a new.

• Equium A300D - 16 c - battery not detected after replacement

  I have an Equium A300D - 16 c. The original battery was shot while I bought a stack of real PA3727-1brs 12. I have put in the laptop, it seems to load, but in the corner, he always says no battery not detected even if its load on. When I leave the charger it says remaining unknown.

  I tried the usual stuff to go into Device Manager and uninstall control compliant apci and still he has not solved it self. I've also updated my bios to the newest one. I just wanted to know what could I do so I can see how much battery is left, and if the laptop can recognize I..

  Hello

  Is this a battery Toshiba of origin of an authorized service provider?

  Usually, the new battery should be detected after the first start, I recommend that you charge the battery while the laptop is turned off. Start the laptop with battery only and check if she recognized properly s.

• Charger replacement for Equium L40-156

  Hello

  Can someone tell me where I can get a replacement charger for the this model please?

  Thank you

  I believe you can buy them in an authorized Service Center

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• Equium A300D - 13 X motherboard

  Hello. Hope that someone very competent would be able to help me with Equium A300D - 13 X.

  I'm trying to repair this laptop for a friend of mine. Her possession for a few years and so the warranty has expired a long time ago now. A few weeks ago his laptop had some 'smoke '. :-) Now it fuels not high at all. Using the multimeter I measured the voltage out of the power adapter and it was given breast range, so I guess it works well.

  I opened and stripped little this laptop, removed the motherboard and found the fault probably accurate. At least one, or even two simple components makes sautéed.

  I uploaded a few photos online on the following link if you could see it for yourself:
  http://www.elny-SL.com/elny/Misc/TOSHIBA_Equium_A300D-13X/index.htm

  Some people, I've talked about advised me to replace the motherboard of other little bit sell it and buy a new one. The cost of repair is at least as half of the total cost of this laptop on eBay, if not more. So since I have nothing much to lose I thought I could always take one of those routes later. First of all, I want to try to fix myself cheaply, I want to buy new spare parts, replacement of defective components and see what will happen.

  My problem is... to identify correctly the blown components and their value exact or approximated, possible replacement find - I thought that I could buy them in some electronic store or even the most famous sales at online auctions. :-)

  Could someone please tell me what is this Brown blown up 'tiny brick' marked as "PC105"? SMD capacitor, or resistance? How to know its value? What is the capacitor value/settings solid aluminium marked as 'PC106' which can also be blown up?

  Does anyone has this motherboard diagram or can direct me to it?

  All ideas are welcome. I suppose that neither I, nor the owner of the notebook (friend) are in a hurry now. I understand the chances of reviving this laptop are not so great, but there is nothing much to lose anyway.

  > Any ideas are welcome. I suppose that neither I, nor the owner of the notebook (friend) are in a hurry now. I understand the chances of reviving this laptop are not so great, but there is nothing much to lose anyway.

  I have no ideas how to check unique on the motherboard parts, because these diagnostic tests needs special tools that are available for the professional service points
  From my point of view, the motherboard is really hard to repair you need of specific e-skills.

  To be honest I think that it of better to sell the defective motherboard (ebay, etc) and buy a second hand cheap, a

• My Equium A300D freezes at BIOS

  Someone help with this one?

  My Equium A300d froze in the Bios boot screen. Finally, I have replaced the ram and hard drive but still the same problem. By trial and error I discovered that the problem was the dvd drive... Remove the system and it loads well, put in place in and from the gel to the bios!

  I replaced the dvd drive wiith a new compatible drive but same result so assume the real hardware is not the problem then can only assume a motherboard problem?

  Has anyone encountered this scenario? Thanks for the research.

  It's really strange question. What version of BIOS is on your computer?

  If I understand you well without ODD your laptop starts properly and preinstalled operating system can be loaded.

  Have you tried to implement ODD when Windows is fully charged?

• Equium A300D - 16 c - display does not

  My girlfriend has an Equium A300D - 16 c which had some problems lately.

  In recent months, whenever she turns on the system, the display does not pull upwards and it takes several tent for lights.

  The strange thing is every time that happens, the system boots normally always that you can hear the Windows 7 startup sound.

  I'm looking for in this question for some time now and I'm running out of ideas.
  Initially, I thought that it could be a wiring problem but by stripping the laptop down, I found that the cable was still firmly in place.

  I also tried to remove the RAM, HARD drive and DVD drive, but it still doesn't pull upward. On the odd occasion she started upward when you do it, but after restart, it has not started again.

  I think that this could be either a transmitting power or the mother board is on its way. This problem has worsened gradually (it took more than 20 attempts it turn on and off this morning) so finally he come not at all.

  To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.
  I tried to keep the power with no energy source button to unload the system, but it does not help.

  I also noticed that if you hear it boot and close the cover, the reopening of the display lid will come on but with the bad (1024 x 768) resolution that has intrigued me even more.

  Any ideas on what could be the problem? I would repair it rather than just buying a new as its still a decent system apart from this problem.

  > To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.

  This means that you can use the laptop as part of the external screen, but it does not work with the internal screen?

  This means that the internal display module isn't OK. It probably needs to be replaced.
  But this does not explain the problems while turning on the laptop.

  In the worst case the mother for laptop AND the internal screen are affected, but it would be really strange and rare bad luck