Adapter WiFi "not connected"?

Similar Questions

• I can't get a wireless connection. It comes up with a message saying that the adapter is not connected.

  Original title: Network card

  The laptop is a series of MSI CX600. I can't get a wireless connection. It comes up with a message saying that the adapter is not connected. The wireless adapter is not displayed next to the ethernet card but appears in the Device Manager and when you click the properties of network adapters listed that they all work normally

  Hello

  1A adapter ever worked?

  2 have you installed the disk supplied with the laptop?

  You can check that the installation of the drivers from here:

  http://www.msi.com/product/NB/CX600.HTML#/?DIV=driver&OS=Win7%2032

• My laptop Vista with Atheros AR5007 802. 11 b / g adapter does not connect to the internet using the local area or wireless network connections

  I just bought a new router d-link wireless n for my house.  Connect my Win 7 Desktop, laptop xp to Acer and multitude of other devices, but my laptop Vista with Atheros AR5007 adapter does not connect to internet.  I tried to disable IPv6, defining the name of the network, flushing dns cache, etc..  Nothing will work.  (It would not connect to an another 802.11n router in January either.)

  I get local only on both connections Wi-wired and wireless, no matter what I do.
  I'll send this to my office that I can not connect my laptop to the internet and he does not see the other machines on the network.
  Any suggestions from anyone?  I spent hours trying to solve the problems, now completely stumped.

  OK, here was my fix:

  I tried a lot of things, but they do not work.  I downloaded a 'new' driver of HP - it turns out it was the original with the problem.  I found another one that was about a more recent months, still does not work.  I finally managed to get the atheros.cz driver for my card files.  But they do not have an installation file.  I had to search for each old file in its directory, copy it to another place (to be sure, just in case) and then copy and replace the old file with the new file in the original folder.  Fortunately, there were only 6 files, but it took about an hour and a half.  This isn't a lot of time compared to the 18 or if I was just trying to figure out the problem.  Now, my laptop connects to the internet without problem.
  I had this problem with a router "n" beginning of the year in a hostel.  The guy in the Inn told me that he had seen before once.  It's obviously a common problem with these cards (as seen on the "solutions" online) and Vista.  I'm always hating on Vista after this problem.

• need help wifi not connecting

  I have and acer aspire E1 - 531 with atheros AR5B125, my computer wireless adapter whenever I connect wifi says limited access and preventing me from accessing internet. I tried to restart the network card, but he did nothing. I checked Device Manager and as my adapter teredo tunnel Microsoft generally has 10 code, all my drivers say it is fully updated, also idk if it is connected but have avast antivirus it says my firewall is disabled and it wont not put me on, can someone please help

  Hello

  Thanks for posting your question on the Forum of the Microsoft community.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do last changes made on your computer before this problem?
  2. You are able to connect to the internet with the cable connected to the modem?

  A Code 10 error is generated in the Device Manager in one of the following situations:

  • Device Manager cannot start the device.
  • One of the pilots who needs the unit does not start.

  The Device Manager has insufficient information to recognize the error that spread upwards by the device driver.

  Note: In this case, the error Code 10 can be a very generic message indicating some sort of unspecified driver or device problem.

  If it helps, try the methods and see them below.

  Method 1

  Step 1

  Try to run in the troubleshooter to build designated as network troubleshooting.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Step 2

  Try to update the drivers

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the problem persists, try to follow the steps mentioned in the following tutorial.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Additional information:

  You can also view the following link.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• IOS 10.0.2 WiFi not connecting

  Hello

  This morning, I had a problem with my IPad 4 (MK6J2B/A) and my Iphone 6s (MKQN2B/A).

  Both devices unloaded during the night and the charge in the morning, both devices would not connect to my WiFi (BT Home Hub 6) even though they have both been previously connected to my WiFi for weeks. Both have a checkmark beside the connection, but not the WiFi icon in the upper left corner. Safari says not connected to the internet. I tried several thing, like plane, reset BT Hub etc., but both have refused to sign. I did a reset on both devices and the Iphone came back and logged in as normal. However, the Ipad has refused to connect or at least with the WiFi icon.

  Surfing on the net and found a large number of people with the same problems. Followed suggestions, as I forgot network password and enter again, reset network etc, but nothing has worked. The only option to reset the whole device and start again. BUT when I tried to remove and delete, of course has been asked to enter my Apple ID to continue. No internet so would not remove.

  I have a hotspot Wifi BT close to home then I connected with that and she. This should make me stop and think that it was something inside the House, but once again, SO I continued and deleted the IPad. From the start of my cool Ipad, follow the instructions until it is necessary to connect to the internet. Had even a tick but no icon of Wifi and no internet, so no way to rebuild or restore my Ipad. SCREAMMMMMMMMMMMMM.

  Out the laptop to rebuild through iTunes, which was obsolete, then click on update and google in the meantime, no problems with the iPad, but with iPad connection to BT Home hub 6. Found a very small post with similar problems and he said to disconnect the hub (WIRED) AppleTV. As soon as I pulled the plug on the AppleTV my iPad connected instantly.

  Wow what a waste of two hours of my life. Don't know if it's hub problem AppleTV or BT, or both, but my AppleTV is now to stay on the WiFi connection and NO cable connection in the future.

  Hope that my pain will help someone else to solve the same problems.

  So thank you for much for this!

  I had this thing this morning, 1 iPad a household of 6 different devices does not connect.  My Apple TV has been connected via WIFI, I just turned off of Apple TV - box and connected iPad itself.

  This happened only a day after the installation of a HomeHu6...

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• Skype WiFi not connecting

  Hi, I recently had a problem with my WiFi Skype does not connect to my router and I have not been able to fix it. I don't have any outside Microsoft Forefront Endpoint Protection antivirus software. Please help me solve this problem because I use Skype every day!

  You see this message?

  http://community.Skype.com/skypec/attachments/skypec/Windows/390360/1/Skype%20cant%20connect.jpg

• A6210 adapter does not connect on 5G (Windows 7)

  I would be very grateful for any help on this problem. I have an I7 computer running on Windows 7 with a Netgear A6210 wi - fi adapter and a modem router Netgear D7000. The router is new and seems to be working on various appliances on 2.4 & 5 GB. The adapter is older and works brilliantly on 2.4, but has all sorts of problems to 5 GB. He also had problems on 5 GB on a previous Netgear modem.

  Most of the time he appears to connect at a good speed (867 MB) but most often fails to get an internet connection. In practice, I'm not sure it connects in fact since I have difficulties to access the router or my SIN cable on the router. In my view, there are occasions when I got the internet on 5 GB, but I played with it so long, I'm not sure.

  I installed the latest driver for windows for the adapter (vsn 5.1.22.0) and it made no difference. When I use windows diagnostics considers what it takes to reset the adapter - but even after doing it still does not connect to the internet. Change to 2.4 GB connects quickly and works every time. NETGEAR genius tells me he's working on channels 9 & 13 to 3 bar strength and about 300 MB/s on 2.4 GB and channel 36-48 to 5 GB with a force of 4 bars and 867 MB / s.

  I would be very grateful for all suggestions finding a way forward. I have no hair left to pull and closer me logging of all products netgear in the trash!

  James,

  Thanks for your reply. In fact, I tried what you suggested, but it has not solved the problem.

  However the problem has since been resolved by going into the modem and changing channels 5G of the numbers (36-42) low to high (100-112). This seems to have solved the problem with the A6210 adapter that connects now on 5G without problem and still works with other devices.

  Interestingly, the two laptops were 5 G connection without problem from the same location as the card and are still. So I have no idea why this change has worked-, but he did.

  Thanks for your help

  Alan

• Satellite L630 WiFi not connecting

  I just bought a Satellite L630 laptop PC series and find that it does not connect to my WiFi network at home.

  The computer sees the network as being available, and when I enter my password, it tries to connect, but said then it's impossible.

  I tried the troubleshooting option, but everything he suggested was to turn off the modem and turning it back on (which I did, without result). I tried to change the various parameters of security, also without success.

  My modem/router wireless home is 3 1/2 years old (a Billion BiPAC 7402GL), so I wonder if it's compatibility problems?

  My desktop computer at home (also 3 1/2 years!) to connect without problems to my wireless home network, and my new laptop connects perfectly to the wireless network when I'm at work, so I have really no idea what is the problem.

  Any advice would be greatly appreciated!

  > My modem/router wireless home is 3 1/2 years old (a Billion BiPAC 7402GL), so I wonder if it's compatibility problems?
  It is possible

  > The computer sees the network as being available, and when I enter my password, it tries to connect, but said then it's impossible.
  This means that the WiFi network is successfully activated.
  In your case, I would check the WLan card settings first;
  I put t know this standard you are using (802 11A B G or N), but you must make sure that wireless card WLan is set to the same WLan standard that is used by the WLan router.
  Go to Device Manager-> card WLan-> properties-> Advanced tab to check these options.

  Make sure that you have selected good encryption (WEP, WPA - psk, WPA, etc.) and the correct password

• HP G60 - 117US LAN adapt will not connect. Vista Ultimate. Manager displays without problem. Can connect wirelessly. Use Nvidia MCP77MV chipset__

  My laptop will be wired adapter not connecting, Device Manager shows no problems

  Hi Baker,

  (a) if it works well before? You get a specific error message?

  (b) don't you recall making any changes to the computer before this happened?

  Connect the laptop to access the internet cable and then try to follow the steps:

  Step 1: check if you are able to receive the IP (Internet protocol) address, run Ipconfig/all at the command prompt.

  Click Start, run, type "cmd" (without the quotation marks), and then click OK to open a MS-DOS command line window. Type "ipconfig/all" (without the quotation marks), and then press the ENTER key.

  ·         Do you have an IP address?

  ·         You get the addressing APIPA (automatic private IP addressing)?

  Ø If the line "Autoconfiguration Enabled' says 'Yes', the 'Auto-configuration IP address' is 169.254.x.y (where x.y is the unique client identifier), then the computer is using AUTOMATIC private IP addressing.

  Ø If the line "Autoconfiguration Enabled' says 'No', while the computer does not currently use AUTOMATIC private IP addressing.

  Note:  With APIPA, DHCP (Dynamic host configuration protocol protocol) clients can be automatically configure an IP address (Internet protocol) address and subnet mask when a DHCP server is not available.

  If you cannot assign an IP address and then try step 2

  Step 2: disable the DHCP (Dynamic host configuration protocol protocol) Broadcast Flag:

   

  Run the fixit available in the link below to disable the DHCP broadcast flag

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/default.aspx/KB/928233/en-us

   

   

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

   

  Let us know if it works

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Network adapter is not connected

  Hello

  I have a virtual machine. After that I turned on the virtual machine, I see that it is not in the network (could not ping the virtual machine).

  Then I turned off the virtual machine and then I checked if the virtual machine is connected to the network click with the right button on the VM, change the settings and checked the network adapter.

  I noticed that the 'plugged in' is not checked.

  So, I checked it in order to make 'connected' and then under tension. But when I tried to verify by checking the status of the device by right clicking on the vm, change settings, she is again automatically unchecked the 'connected' option and the virtual machine is still off-line.

  I am not able to understand why it is always not connected after power on, even after that I connected it several times.

  Please take a look at the screenshot for reference.

  Please read http://kb.vmware.com/kb/1009103 and make sure that you have available ports on your "VM Network" vSwitch. If this is not you, have a look at the vmkernel newspaper.

  André

• Satellite P305-S8920 wifi not connecting, Vista 64-bit

  Hello

  I have a Satellite P305-S8920 running Windows Vista Home Premium 64-bit. My problem is that my laptop does not connect to my home wireless network.
  Whenever I try to connect, I get an error saying that my phone does not meet the requirements of the network.

  I use a router DIR-615 of Link with WPA security. I can connect fine using LAN (ethernet) and the unprotected at my college network and the local library.
  I also dual boot with Ubuntu Linux and I very well use it, so I know this isn't a hardware problem can connect.

  Thanks for any help.

  Make sure that the wireless network for laptop card is installed and enabled correctly.
  East - the WLAN card and router works with the same mode (a, b, g, n) wireless?

  Have you tried to test on s networks friend?

• M70: WiFi adapter does not connect to the wifi Lan

  Hello
  I have the Satellite M70-122 with an Intel PRO set wireless adapter 2200BG Driver version 9.0.2.25. ConfigFree radar screen correctly identifies the wifi router of my Motorola, but when I click on and get the router on the icon of the laptop, no connection is established and there is a message that says:
  "Sell another application is controlling the wireless card."

  I disabled the "use Windows to configure my wireless" box under settings to connect wireless but no luck.

  In addition, there is no wifi adapter icon in the status bar, or I can get to a window with the settings of the adapter to enter the SSID and WEP details.

  Any help will be appreciated.

  Hello

  Have you used a tool of connectivity like Atheros WLan client utility?
  On WEP:
  PC card encryption is hardware specific. Maybe if it of not possible to use WEP encryption, because the card doesn t that supports.

  Please also see this page:
  http://support.Intel.com/support/wireless/WLAN/pro2200bg/index.htm

  Good bye

• Atheros AR9285 802.11b/g/n WiFi Adapter does not connect.

  I have a HP DV6 3049tx windows 7 64-bit, which have an integrated Atheros AR9285 802.11b/g/n WiFi Adapter of the for 1 month I am not able to connect to any network if a list of available wireless networks. the error msg that says is Windows is not wheat to connect to the network. My version of the driver is 8.0.0.238. What can be the solution Please HELP!

  Hello harshsinha,

  Take a look at this page http://goo.gl/7sjsm

  All drivers and updates are found on this page. Check inside the Networking section and you will see an Atheros driver

  This document here http://goo.gl/Vnwiu will give a few wireless troubleshooting steps that will help.

  Please let me know if this helps solve your problems.

• RALink RT3290 802.11bgn Wi - Fi adapter will not connect to 802.11 g, windows 8

  Hi eeveryone,.

  Some can help me!

  I bought a new laptop HP Pavilion g7. Ralink RT3290 802.11bgn Wi - Fi adapter I but my problem is that I can only connect to the network 802.11 n and I can't use wifi 802.11 g. When I try to connect wifi 802.11 g it says limited is unable to download a Web page, but should I use with this adapter Ralink 802.11 bgn Yes?

  I've already updated the wireless card but did not help I have disabled all firewall and antivirus software and I have already written here manually the IP address, netmask etc... I got the software window 8.

  But the funny thing is with my old laptop which has windows 7 that I can connect without any problem WiFi 802.11 g!

  I would use 802.11 g, because the signal is stronger than 802.11 n. I hope I can receive the signal of network wifi 802.11 g somehow.

  Thanks for your answer in advance!

  maybe try to reinstall windows and check how it works without installed programs

  You can also restore your windows settings to check