Add a dns XP entry require a restart to take effect?
I added a new DNS entry and I was wondering if you need to reboot XP before it takes effect?
This is a forum for Vista but XP works substantially the same in this situation (that I used XP since its release and have yet another computer using XP and customers who still use XP). You probably do not have to restart; However, you will need to disconnect from the network (local or internet), and then restore the connections for the new DNS entry is recognized. In fact, you can check after the change by clicking on start / all programs / accessories / command prompt commands and typing ipconfig/all and enter then check the connections and see if the new DNS entry is displayed. If so, you don't have even to re-establish the connection or reset as long as the new DNS entry is displayed. If this does not work (it does not appear in ipconfig/all AND restore the connections do not have to add (ipconfig, you can check / all after restoring connections as well) and you know that the change will solve the problem (whatever that is) and have need to be added, then reboot to see if that helps (but again once I do not think it must be that restore the connections may be necessary).)
In short, I would just check ipconfig/all to check if the new entry is there. If this is not the case restore connections and check ipconfic/all again. If still no there, then restart. If still not there, so the addition did not work and you will need to check that it is correct and try to add it again.
Please post questions in the Forums XP: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
If I add an entry in a file such as Get - VM's vmx | New-AdvancedSetting - name "isolation.tools.diskShrink.disable" - value $true.
This will require a reboot of the virtual machine to take effect?
http://www.virtuallyghetto.com/2014/03/a-kitten-is-also-harmed-every-time-you-edit-a-vmx-file-by-hand.html is a good read
William has an interesting workaround solution using vMotion to cause the changes take effect without needing a reboot (have a read of the last paragraph)
-
Are people capable of reproducing the following, or is it just me?
Problem:
Impossible to activate the agent of property entry for an external input of type number in a user interaction as is not not but can define required entry of type string. This seems to affect interaction element user as well as the workflow if the number data type is used.
Version: 4.2.1 but think it goes further than
To reproduce for workflow entries:
create a workflow, add entry named TestingNumber of type number and another called TestingString of type string.
Switch to the Presentation tab and set the required before TestingNumber its default property (required entry is not for number)
Result: Unable to set the terms of ownership of number but cannot for string
To reproduce the element of user interaction
Drag a box to design workflow user interaction element aon add external called TestingNumber of type number of entry and another named TestingString of type string.
Switch to the Presentation tab and set the required before TestingNumber its default property (required entry is not for number)
Result: Unable to set the terms of ownership of number but cannot for string
It seems that it was possible before:
In the workflow to Remove Instant excess in library/vCenter/Virtual Machine management / cliché. In the element of user interaction "Want to delete snapshots" the presentation tab has a number called "numberOfSnapshotLeft" which has a set of properties of entry required. screen attached.
Meet others similar: last posting mentions a similar case of not being able to establish the required entry of number but cannot string.
Is this by design or a bug with my environment?
Properties listed for number Properties Sample referred to string Input parameter see the Input parameter see the Hide the parameter input Hide the parameter input Predefined responses Required entry Predefined list of items Predefined responses Default value Predefined list of items Maximum number of value Default value Minimum number of value Maximum string length Number format Minimum length of the string Data binding . Custom validation Data binding Custom validation Mulit It was available in earlier versions of the vCO and was withdrawn "by design". I don't remember what was the explanation. I worked around it by using other properties of validation such as min / max, or a custom validation.
You can open a support call if you want the official response.
Christophe.
-
Speech recognition freezes and requires the restart.
SPEECH RECOGNITION - 2nd try. I am a disabled person who is 85% dependent on Microsoft speech recognition to communicate in writing. Two weeks ago my SR program would sometimes freeze and require rebooting. Today, it will stop working every 2 to 3 hours (I find other similar problem, still no solution) and requires the restart of the plant. He was originally also page redirect at will, which results in the loss of previously entered data. Needless to say that my program of speech recognition works pretty well right now. These last two days have been exhausting, trying to keep the operational programme. Can anyone offer advice, assistants, suggestions or point me down as a path to success?
Sincerely, StanHello
1. you did recently on the computer until the problem started?
It seems that speech recognition works badly or something is broken. There are a few steps that we can try to solve this problem.
Step 1: Sfc scanner to find and repair corrupt system files.
1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
2. type the following command and press ENTER:
sfc/scannow
The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
For more information, see this link: http://support.microsoft.com/default.aspx/kb/929833
Step 2: If the problem persists, perform the clean boot to find out what is causing the problem.
Follow step 1 to disable all non-Microsoft services and check if the voice recognition works great: http://support.microsoft.com/default.aspx/kb/929135
If the voice recognition program always freezes, then follow step 2 to step 6 to know what causes this problem: http://support.microsoft.com/default.aspx/kb/929135
Follow step 7 to start the computer in normal mode: http://support.microsoft.com/default.aspx/kb/929135
Post back with the results, so that we can help you further if necessary.Kind regards
Syed
Answers from Microsoft supports the engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
How to add a new boot entry?
How to add a new entry to boot to (re) install Windows? EasyBCD does not work for me.
Hi, Sylvester
Thanks for posting in the Microsoft Community. I understand your concern and I am happy to help you.
To create a boot entry for the second partition, you must use bcdboot
Assuming you're in C:\Windows:
1 bcdboot e:\windows
2 bcdboot c:\windows
When you restart the system, you will be presented with the start menu in Windows with two inputs for Windows 7. If you select the entry that starts in C:\Windows, you can rename the entry for this partition with:
bcdedit/set {current} description "Windows 7 (Partition 1)"
What makes the operating system starts at the start of the default entry in the start menu:
bcdedit/default {current}
As a result, the default OS at the first startup in Start menu item
bcdedit displayorder {default} /addfirst
Or you could make the OS at startup the first item in the start menu:
bcdedit /dispalyorder {current} /addfirst
Now, restart and select the second item in the start menu which should be called "Windows 7". Once started in E:\Windows rename the BONE started at startup:
bcdedit/set {current} description "Windows 7 (Partition 2)"
Check that the start menu works OK and save the data of the bcd to a partition that has no operating system installed on it:
bcdedit/export D:\Saved_BCD_Settings\SavedBCD
If you make a mistake later you can restore the menu boot bcd:
Bcdedit /import D:\Saved_BCD_Settings\SavedBCD
I hope this helps. Back to us for other queries. We are happy to help you!
-
reverse DNS (PTR) entries
The resouce said: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aad.shtml#topic9 States:
"IP addresses from the pool of global addresses specified with the global command require reverse DNS entries to ensure that all external network addresses are accessible through the PIX. To create reverse DNS mappings, use a DNS pointer (PTR) record in the name-address for each global address mapping file. Without the PTR entries, sites may experience slow or intermittent Internet connection and FTP requests fail consistently. »
Suppose that a network topology looks like this:
A PIX with 3 interfaces:
inside the interface (private public static IP 10.10.10.1)
external interface (public static IP of 69.110.38.35)
DMZ interface (static IP private address of the 30.30.30.1)
The foregoing 1) says Will "reverse DNS entries" apply to this case?
(2) if not, under what circumstances the DNS entries "reverse" apply?
Thank you for helping.
Scott
DNS = domain name to ip
Reverse dns = ip domain name
Reverse dns is mainly used for authentication or should I say identify verification.
for example, hacker is going to launch an attack using an invalid (i.e. ip address spoofing), so a server that receives the request will perform a reverse dns lookup to verify the identity of the ip address if it corresponds to a valid domain name or not.
a typical use of dns reverse these days is to block spam e-mail.
for the moment, not only of many server run the dns look-up, however, I believe that one day it will be very popular.
However, to configure reverse dns, you must work with the Internet service provider, since it must be implemented on the isp, public dns server server non-local dns in your business.
-
updates to the add-on do not install after FireFox restarts
If I go to Tools-Extensions some of my modules are updates are available. After I downloaded it says he will
be installed after that restart of FireFox, but it does not. I'm not sure the update is charged down, but it seems
as it is. The progress bar is moving forward, but it does not show the bottom of page loading.
I use Mac OS 10.6.8 with FireFox 19.0.2The corruption of extension files sometimes causes the issue. Try the procedure described in the following article. The files will be recreated when you restart Firefox. There are also other suggestions in this article.
-
The add-on guard bar reappear whenever I restart Firefox
Hello
I have problems with the add-on bar. After using Chrome for so long, have something on the bottom of the screen too much space, it is disturbing to me. I always cut the bar module because I put all my Add on icons next to the address bar in Chrome, but whenever I have to close and restart Firefox, the bar of the add-on always reappears. Is there a way I can keep it from coming back? I use Firefox 5. It's a minor annoyance because 2 clicks will get rid of it, but I'd rather not have to do anyway.
Thank you.
This is normally caused by an extension of the problem. For example, the extension of McAfee Site Advisor is known to make the bar of the add-on to continually resurface.
You can use the procedure in the following link to determine which add-on is causing your problem - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
-
Hi people,
I have a key DKIM to add and I use the application service provider to put me in the hostname as "/ hostname: api._domainkey.
However I can't put the line of underscore '_' in the entrance of the DNS server. So, is there a good way to do this? I can successfully well of SPF as a txt record.Any help is appreciated.
Best regards
AlainlainYou need to reach to hand modify the DNS server. You found the.app program does not allow this.
First temporarily disable the server DNS from Mac in.app
Then launch Terminal.app and edit the appropriate in - file
/ Library/server/name /.
for example db.yourdomain.com
Then add a line to this file looking like this, but with your values.
_domainkey.yourdomain.com. 10800 IN TXT "t = y; o = ~ ; [email protected]".
Note: You may need to do this as well on your Mac DNS server and also on an external DNS server that is managed by your Internet provider, it depends on how your domain is configured.
Finally, use.app to start your Mac DNS server again, and then re - read the DNS files, including the addition above.
-
Hi all
I am trying to identify what is the maximum feature that can be implemented in a BlackBerry application so that updated/uninstall does not reboot of the device.
Official information about the persistent objects:
==== KB ====
... The application contains a live referenceto a persistent object. ...
= Forum =.
http://rim.lithium.com/T5/Java-development/error-module-is-in-use/m-p/131618
.... What exactly does it mean that "The application contains a live reference to a persistent object"? More specifically what does "live" mean? .... This is an "uncommitted" modified persistent object that is in use by the application. ....
My current tests show that once you have something stored in PersistentStore, uninstall / upgrade will require restarting the device. Can someone please confirm this or explain what is wrong with my test script (code to follow)?
Your application being started has nothing to do with the fact that there is a direct reference from your application to the persistent store. At the start of the system, the operating system made a lot of analysis of existing modules, whether or not they are reported to run at startup. During this analysis, it will link the custom object in the modules in your application's persistent store. (This analysis also makes it possible for the system automatically removes the persistent, custom objects that have been orphaned by an application being uninstalled.)
As Simon posted, is not having an object persistent, but having a custom persistent object that forces a restart. Try your experience using a hash instead of a ConfigObject table.
Note that the downside of using a generic object as the Hashtable class is that the persistent data of your application will not disappear when your application is removed.
-
Cisco 877W DHCP does not automatically fill the Windows/Mac customers with DNS server entries
I have a 877W which was operational on Verizon for about 5 years. It never automatically distributed info DNS server for customers who get DHCP issued IP address. I have to manually enter the DNS entries to each client. What happened to other sites where I've got installed on AT & T as well as 877 unified communications.
Here is the config. Thanks in advance for the help.
Building configuration...
Current configuration: 7987 bytes
!
version 12.4
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime show-timezone msec
Log service timestamps datetime localtime show-timezone msec
encryption password service
sequence numbers service
!
Cod of hostname
!
boot-start-marker
boot-end-marker
!
logging buffered debugging 51200
recording console critical
enable secret 5 jSwA $1$ $ 3B5lJNqm0ewh
!
AAA new-model
!
!
AAA authentication local-to-remote login
local remote of the AAA authorization network
!
AAA - the id of the joint session
!
resources policy
!
PCTime-6 timezone clock
PCTime of summer time clock day April 6, 2003 02:00 October 26, 2003 02:00
IP subnet zero
IP cef
No dhcp use connected vrf ip
DHCP excluded-address IP 192.168.7.1 192.168.7.19
DHCP excluded-address IP 192.168.7.70 192.168.7.254
!
IP dhcp pool sdm-pool1
import all
network 192.168.7.0 255.255.255.0
router by default - 192.168.7.1
DNS-server 68.238.96.12 68.238.112.12
!
!
inspect the IP name DEFAULT100 cuseeme
inspect the IP name DEFAULT100 ftp
inspect the IP h323 DEFAULT100 name
inspect the IP icmp DEFAULT100 name
inspect the IP name DEFAULT100 netshow
inspect the IP rcmd DEFAULT100 name
inspect the IP name DEFAULT100 realaudio
inspect the name DEFAULT100 rtsp IP
inspect the IP name DEFAULT100 esmtp
inspect the IP name DEFAULT100 sqlnet
inspect the name DEFAULT100 streamworks IP
inspect the name DEFAULT100 tftp IP
inspect the tcp IP DEFAULT100 name
inspect the IP udp DEFAULT100 name
inspect the name DEFAULT100 vdolive IP
synwait-time of tcp IP 10
IP domain name cods.com
name of the IP-server 68.238.96.12
name of the IP-server 68.238.112.12
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
!
!
Crypto pki trustpoint TP-self-signed-437228204
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 437228204
revocation checking no
rsakeypair TP-self-signed-437228204
!
!
TP-self-signed-437228204 crypto pki certificate chain
certificate self-signed 01
30820254 308201BD A0030201 02992101 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
69666963 34333732 32383230 34301E17 303731 30313632 33333131 0D 6174652D
395A170D 2E302C06 1325494F 03550403 32303031 30313030 30303030 5A 303031
532D 5365 6C662D53 69676E65 4365 72746966 69636174 652 3433 37323238 642D
06092A 86 4886F70D 01010105 32303430 819F300D 00308189 02818100 0003818D
BF73E16C 24A3FB0B A44C83C8 45ACEC75 163C2F0A 87836F7F A43FEB72 0EF26AFA
C7F35ED6 CBCC6853 5E82B0A6 1FD8020B F3630023 AB30B870 B3155EE6 86988910
4ACF5121 1CBFF4DC B705DF1E 5D0D698F 06493 D 3DD8D036 42 FE450D21 E26A4DAF
CE6BA806 81A9F451 0246698E DA7B49E3 160F115C E1104FA9 31FA3C15 CD 782 279
02030100 01A37E30 7C300F06 03551 D 13 0101FF04 05300301 01FF3029 0603551D
20821E63 11042230 6F64732E 6F666472 63697479 6E677370 69707069 72696E67
732E636F 6D301F06 23 04183016 24 D 77493 80142FA3 03551D 52CF7094 B847B6EB
1385E2E5 0F3A301D 0603551D 0E041604 142FA324 D7749352 CF7094B8 47B6EB13
85E2E50F 3A300D06 092 HAS 8648 01040500 03818100 076EE499 12F46D79 86F70D01
375B7EA6 C9279DA4 B32723B5 908C9FB8 D42CB978 BB24A8FE 73579A3D CA 5130, 87
B7716644 7E13710D C6E6360C D0A36F7B F62540E2 0C33523B E50396B9 2EF66FA7
56519E62 E55EAF3C E1D9BEC9 3AE67B59 75E61F06 B649E90A 2798F755 7A020F0A
F8BDABFA 1EE37B6A A918560D DA45AD70 801BC66E 94D1468E
quit smoking
username privilege 15 secret $5 1jgO$sGD@#l4yTtLtYoEZbh/Wl steal551.
!
!
door-key crypto vpn_ddaus
pre-shared key address 0.0.0.0 0.0.0.0 - key stealthfortyfor5
door-key crypto vpn_rmlfk
address of pre-shared-key 205.30.134.22 key stealthfortyfor5
!
crypto ISAKMP policy 10
md5 hash
preshared authentication
Group 2
!
crypto ISAKMP policy 30
BA 3des
preshared authentication
Group 2
invalid-spi-recovery crypto ISAKMP
ISAKMP crypto keepalive 20
!
Configuration group isakmp crypto VPNRemote client
key ConnectNow45
pool ippool
ISAKMP crypto vpnclient profile
VPNRemote identity group match
client authentication list for / remote
Remote ISAKMP authorization list
client configuration address respond
Crypto isakmp CODS_DDAUS profile
key ring vpn_ddaus
function identity address 0.0.0.0
Crypto isakmp CODS_RMLFK profile
key ring vpn_rmlfk
function identity address 205.30.134.22 255.255.255.255
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
vpnclient Set isakmp-profile
Crypto-map dynamic dynmap 12
Set transform-set RIGHT
CODS_DDAUS Set isakmp-profile
!
!
MYmap 1 ipsec-isakmp crypto map
defined by peer 205.30.134.22
Set transform-set RIGHT
CODS_RMLFK Set isakmp-profile
match address CODS_to_RMFLK
map mymap 65535-isakmp ipsec crypto dynamic dynmap
!
Bridge IRB
!
!
interface Loopback10
IP 1.1.1.1 255.255.255.0
!
ATM0 interface
no ip address
route IP cache flow
No atm ilmi-keepalive
DSL-automatic operation mode
!
point-to-point interface ATM0.1
Description $FW_OUTSIDE$ $ES_WAN$
Check IP unicast reverse path
inspect the DEFAULT100 over IP
NAT outside IP
IP virtual-reassembly
PVC 0/35
aal5snap encapsulation
!
Bridge-Group 2
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Dot11Radio0
no ip address
no ip-cache cef route
no ip route cache
!
encryption vlan 1 tkip encryption mode
!
SSID tsunami
VLAN 1
open authentication
authentication wpa key management
Comments-mode
WPA - psk ascii 7 14231A0E01053324363F363B36150E050B08585E
!
base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
root of station-role
!
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route cache
no link-status of snmp trap
No cdp enable
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 covering-disabled people
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
!
interface Vlan1
Description $ETH - SW - LAUNCH, INTF-INFO-HWIC $$ $4ESW $FW_INSIDE$
no ip address
IP tcp adjust-mss 1452
Bridge-Group 1
!
interface BVI1
Description $ES_LAN$ $FW_INSIDE$
192.168.7.1 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly
route IP cache flow
IP tcp adjust-mss 1412
!
interface control2
IP 70.14.49.134 255.255.255.0
NAT outside IP
IP virtual-reassembly
crypto mymap map
!
local pool IP 10.10.10.1 ippool 10.10.10.254
IP classless
IP route 0.0.0.0 0.0.0.0 70.14.49.1
!
IP http server
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
overload of IP nat inside source list 133 interface control2
!
CODS_to_RMFLK extended IP access list
IP 192.168.7.0 allow 0.0.0.255 192.168.1.0 0.0.0.255
!
recording of debug trap
access-list 1 permit 192.168.7.0 0.0.0.255
access-list 100 remark self-generated by the configuration of the firewall Cisco SDM Express
Access-list 100 = 1 SDM_ACL category note
access-list 100 deny ip 70.14.49.0 0.0.0.255 any
access-list 100 deny ip 255.255.255.255 host everything
access-list 100 deny ip 127.0.0.0 0.255.255.255 everything
access ip-list 100 permit a whole
access-list 101 permit ip 192.168.7.0 0.0.0.255 192.168.3.0 0.0.0.255
access-list 133 deny ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 133 deny ip 192.168.7.0 0.0.0.255 10.10.10.0 0.0.0.255
access-list 133 deny ip 192.168.7.0 0.0.0.255 192.168.10.0 0.0.0.255
access-list 133 deny ip 192.168.7.0 0.0.0.255 192.168.3.0 0.0.0.255
access-list 133 allow ip 192.168.7.0 0.0.0.255 any
not run cdp
mymap permit 10 route map
corresponds to the IP 111
set ip next-hop 1.1.1.2
!
!
control plan
!
Bridge Protocol ieee 1
1 channel ip bridge
Bridge Protocol ieee 2
IP road bridge 2
connection of the banner ^ CAuthorized access only!
Unplug IMMEDIATELY if you are not an authorized user. ^ C
!
Line con 0
no activation of the modem
telnet output transport
line to 0
telnet output transport
line vty 0 4
privilege level 15
transport input telnet ssh
!
max-task-time 5000 Planner
Scheduler allocate 4000 1000
Scheduler interval 500
endHello
Can you try to remove the IMPORT ALL of the dhcp pool
RES
PaulSent by Cisco Support technique iPad App
-
Cannot add a phone log entry correctly
Hi all.
I'm trying to add a false entry to the phonelog. Here's what I do:
PhoneLogs logs = PhoneLogs.getInstance(); PhoneCallLog log = new PhoneCallLog( new Date(), PhoneCallLog.TYPE_PLACED_CALL, 65, PhoneCallLog.STATUS_NORMAL, new PhoneCallLogID("666"), ""); logs.addCall(log);
This callLog entry is saved, but his story is not correct.
Here's what I want it to look like:
And that's what I have (after several times repeating the addition of the phone log):
Note the empty lines?
How can I update the lines? What I missed by filling in the PhoneCallLog?
A fix for this has not been released.
-
Uninstalling vshield app requires a restart of the host?
We are upgrading vsphere 5.1 to 5.5 and plan to uninstall apps vshield to do a fresh install. We will migrate the hosts, but not vshield apps, then install new applications in the environment of 5.5...
Thank you!
-anne
Hi Anne,.
Uninstalling vShield app requires the host to restart and you keep the VMs and then uninstall of vShield manager. This will remove the filters from the NIC--> modules to remove the host, followed by restart.
If your cluster tolerates the failure of the single host, you can do without virtual machine downtime.
-
Best approach for a Service that runs on a queue of entry requires an asynchronous operation
I have some sort of a queue of requests to which I am able to add news from various parts of the application.
My JavaFX-Service must then process these requests asynchronous, but coordinated way.
My current approach is to use an ObservableList for the queue. I have a listener on its emptyProperty and trigger restarting the service whenever it not pass of the vacuum to the vacuum.
In the task of my service, I take the first element of the list, treat it and when the treatment has passed (or omitted), delete the list.
Then, however I have to check in the succeeded() and failed() methods if there are more items and restart the service in the event that there are.
It feels unnecessarily complicated and potentially error-prone. Is there not an approach more simple I'm missing?
Oh cool, the simulation of greed, thanks for the link that James.
-
Photosmart C309g-m requires Mac restart after sleep
Hello
I use a new 24 "iMac running Snow Leopard (10.6.3 version) and an all new HP Photosmart Premium C309g-m and each time the Mac wakes up from sleep, or I change username, then the only way I can get the printer to work to restart the Mac. Both are related to the USB connection.
I tried to install the following drivers:
(1) the CD supplied with the printer.
(2) the drivers for the C - 309 m
(3) the latest version of drivers 11.0.0 dated 2010-02 to: software HP Photosmart full feature and drivers - Mac OS X v10.4, v10.5, and v10.6
None of this changes anything.
There is not much point in having a printer that requires a reboot to print so I would be very grateful if anyone has any suggestions - other than the printer back!
Best regards
Octantly
Given that you have installed the software from the CD (meant for 10.5 and earlier only), it may have messed you up. We will uninstall this way:
Go to Applications/Hewlett Packard / click Uninstall HP
Click on continue
Highlight your device in the left pane
Hold down the Ctrl and Opt Cmd and click on uninstall
There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
Click on continue and let it finishNow run a software update.
Then, remove and reinstall the printer in System Preferences, Print & Fax.
You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.
Maybe you are looking for
-
Can I delete content and settings on my old iPhone 5 without changing anything on my iPhone 6 or iMac?
-
Firefox download on my Win7 64 bit
When I go to the download page and click on download, that nothing is happening. I have not had any problems on my laptop with vista 64-bit.
-
How do I cut internet at certain times on my nighthawk r7000
How to cut internet at certain times. in the help box it says to go to the Advanced tab, but I don't have this tab my choices on the left side are home, internet, wificonnection, settings of the router, map network, parental control, readyshare, airp
-
How to download the entire library of music on iOS devices?
Hello I have a few devices running iOS 9.2 I'm now can download single song or playlist on these devices, but not any music library. I realized that keeping online list could consume too much data, so can just download entire library of music for lis
-
Specifications weight paper for 100 HP LaserJet color MFP M175
I tried (unsuccessfully) find the specs of paper weight for 100 HP LaserJet MFP M175nw color printer. The user manual and the online help only useless information offer, not specified, such as: use only paper that is approved for use in printers lase