Add a line at a time and automatic scrolling - multicolumn list

Similar Questions

• Play a playlist or album adds the first song 20 times and none of the others

  I have an iPhone 6 and you have a subscription to the music of Apple and iTunes Match (had one before the subscription of Apple's music). When I try to play an album or a playlist, the first song from the album or playlist will play 20 times, but none of the others. This also will show the list of "to - go".

  I have the latest version of installed iOS (9.3.2). I already rebooted my phone, but the problem persists.

  You probably accidentally hit the icon repeat at the bottom of the expansion, now playing screen.  It is very easy to "Repeat 1", in which case it will be play the same song over and over again.  I did this more than once myself.

  See you soon,.

  Jeff

• Windows 7 slow shutdown and automatic restart

  My Windows 7 Ultimate Service pack 1 64-bit takes a long time to shutdown and restarts itself. My PC all the hardware and software drivers are updated (iTunes, etc.) are fully updated and has the latest updates for Windows (optional but Important) Installed.When I select shut down, it is the screen of closing and will show 'Shutting Down' with this wheel that runs for a long time, the time and automatically restarts without BSOD or Errors.My PC configuration-i5 2500K Stock , 8 GB at 1333 MHz Ram, Intel DH67CL Mobo, Samsung SSD 840 120 GB SSD (with Windows 7 Ultimate SP1 and Windows XP Pro SP2 64 Bit time and installed in IDE Mode) 500 GB Seagate HDD, Zebronics PSU, LG DVD Writer.I currently had not tried all fixes. Please help me and thanks

  Hi Bilodeau,

  You did changes to the computer before the show?

  If your computer seems to close slowly (or not at all) starts slowly, or if it is not energy saving modes, it is possible that a program or device driver is interfering with Windows power settings.

  Method 1: I suggest you try the steps from the following link:

  Why my computer won't turn on or off quickly?
  http://Windows.Microsoft.com/en-CA/Windows/computer-wont-turn-on-off-quickly#1TC=Windows-7

  Method 2: I'll help you with this problem. I suggest you follow the steps in the article.

  Optimize Windows 7 for better performance

  Slow PC? Optimize your computer for peak performance

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• Dynamically add data to a table field in a drop-down list?

  Hello

  I tried to create a drop down menu to dynamically fill a table based on what menu option drop down is selected. I can run to add a line to the times, which is good, but I want to add the text for the option chosen to a field in the newly created line. I can get this to work using Row1.Field.rawValue = "blah blah blah" but when I want to get dynamic and call the line created by using something like resolveNode I can't get anything to be entered in the field. Is this possible at all?

  Here is my script:

  ==================

  topmostSubform.Page1.tabletest.DropDownList2::exit - (JavaScript, client)

  If (this.rawValue == 1) {}

  Table4._Row1.addInstance)

  Page1.tabletest.Table4.Row1.identity.RawValue = 'Servitude for Transmission line.

  };

  If (this.rawValue == 2) {}

  Table4._Row1.addInstance)

  Page1.tabletest.Table4.resolveNode(row1[Table4.row1.instanceManager.Count-1]). Identity.RA wValue = ' Servitude for electricity and other purposes.

  xfa.host.messageBox ("Ausgrid");

  };

  ===================

  The first part, for this.rawValue is 1 good works for a single instance of the addition. The second part, where I tried to do a resolveNode, adds a line, but does not enter any text.

  Thanks in advance for your assistance with and review of this problem.

  See you soon,.

  Greig

  

  Hello

  the resolveNode method must somExpressions wrapped in quotes.

  In front of FormCalc JavaScript does not support numeric values in the [] accessors to solve a case.

  Modify your script

  Page1.tabletest.Table4.resolveNode("Row1[" + Table4.Row1.instanceManager.count-1 + "]").Identity.rawValue = ...
  

• What is 'supply mosquito' and why it reload automatically to my list of Add-ons every time that I reboot

  There is a good bit of wisdom in the old expression, "if it ain't broke, don't fix it." You could reduce the number of updates at least 50% if you would just fix things which ARE 'broken', and, whenever you update FF, it causes another set of problems that I am having trouble. The most recent is a add-on called "offer mosquito" that is automatically added to my list of Add-ons. I have delete - not disable, DELETE - the next time that I reboot it comes back. I am more as more than just a little bit tired to do... How can I get rid of it for good?

  With the help of 25.0 FF on PC under Windows 7 Home Premium 64-bit.

  Hello Goodolgal, the behavior you have described is not caused by an update of firefox but with adware/malware on your pc. Please run a full scan of your system with security tools like the free version of malwarebytes and adwcleaner.

  Fix Firefox problems caused by malicious software

• How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  It does not work like that. It cannot be scheduled for a specific time.

• Time and date of the Iphone 6s set contacts automatically / backup

  Hi my name is Rebecca. Please be patient, this is a long story with a question to which Apple for a month and a half has not been able to solve. The end of February, I went to Sprint to upgrade my iphone 6 to a 6 s. (my 6 had no problem). The backup and restore to the other went off without a hitch. Two weeks having the phone, date and the value automatically switched to a GMT setting which is 4 hours ahead of New York. Assumption is that the phone has been deserted. I got a new phone and everything has been backed up and restored again. Less than two weeks later, the same goes for the 2nd iphone 6 s.  I went to Sprint and got a 3rd iphone 6 s. backup and restored all again. Less than a week later for the 4th time, the new iphone 6 s time and date switched to the time zone GMT 4 hours ahead of New York. At this point, I called Apple Tech support. A very nice tech Jason worked with me for 2 weeks to fix this. He sent Apple a 4th iphone 6s. We did a backup and when the new phone came in did us a restore. A few days later, the same problem. Apple accuses Sprint, Sprint complaint to Apple. At this point, Sprint said that my sim card was corrupted and he sent me a new. On the phone with Jason, we did a reset of the iphone 6s failing manufacturers. Removed the corrupted sim card and put in a new vacuum. Phone restarts and when you get to the Setup screen, it asks "set up as a new user or a user to return. Jason said as a new user.  I clicked on new user. Following her request for an apple ID. Jason said I should put in my existing apple id (although it has been activated on as a new user). At this point the phone wouldn't turn on. On the phone with Sprint. They did not understand as to why the phone would not activate. Jason suggested that I put my original sim card in (which was noted as corrupted), then the active phone. At this stage because I had not done a restore, the only information on my phone now an old backup who had my contacts and some of the notes, images etc. Jason said to do a restore after just 24 hours to be sure of the time and the date stay correct. Not happened. Less than 24 hours, the date and time that is set to automatic changed to the GMT time zone. Jason was out of suggestions. We left him there. I am very angry to pay more than $800 for an iphone that feature very very important does not work. On mine, I restored my phone and thought what I'd do. I then did a backup. I'll stop my icloud. I have reset my builders phone by default and when I went through the whole upward I plugged my phone in itunes and restored my phone from my computer backup. (Icloud is always OFF). Less than 24 hours later at the date and time in GMT area again. Once again, that I have a phone very very expensive with a feature that is vital for me, I can't use. Yes, I could turn the machine off, but I shouldn't do that. So here's my question: Iphone 6, I have not had any problems with my icloud or my sim card or the date and time. 6 s IPhone that I do. I got iphone 4 brand new 6s with the same problem. Is - that my sim card is corrupt and transfer information corrupt, though only it worked fine in my iphone 6? Second question: I don't want to sign up for a new apple id and start from scratch. This will screw up my gmail which is linked to the apple ID. How can I back up my contacts only on my computer and then be able to reset my phone manufacturers by default, then erase all information from my existing apple ID in order to use again, but only restore contacts which is the worst part of transfer phones. Apps and notes, photos and all the rest is not a problem to start from scratch, but contact is almost impossible to have to type each hand one by one. Please someone out there with a solution. Thank you in advance.

  Two recommendations.

  1 post this issue on your part on the iphone forum, to confirm the number two with someone else.

  Use iPhone

  2. you must stop working with Apple. Your iPhone download the signal giving them news of the time and origin of this signal

  I have no idea, but it's not from Apple. Coming here or talk to Jason you wasting your valuable time. It is at least

  get paid for it, you're not. Every second that you type in this position, mine or every second you spent on reading

  the phone with Apple after the second phone had the same problem you've wasted talking to the wrong party. Even than calling your

  manufacturer of furnace you paid 5000 for oven when your gas is not delivered on time or bad quality. And I have

  don't say it's Sprint, cause I don't know, but it's something that gives this info to your phone.

• Gigaframe L80 forget automatic power switch time and brightness settings

  Hello world

  I'm on my second gigaframe l80 and it has just developed the same problem that the first seems default back to factory settings.
  Then he forgets his automatic power switch time and very annoying brightness adjustment!

  Has anyone else had this problem?

  a soon fly

  Hello oozie.

  I also own a Gigaframe L80 and it works very well.
  Have you plugged the permanentely power framework (using the AC adapter)?
  How long does it take, the framework sets the default settings?
  Have you tried "reset" of the image using the small button on the bottom of the frame?

  welcome them

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• I have a Server R2 windows 2012 automatically switches out of his own for several times and it doesn't look like a hardware problem.

  I have a windows server R2 2012 which automatically switches out of his own for several times and it doesn't look like a hardware problem. and I have this problem every day.please tell me what is the reason

  Original title: r2 windows server 2012

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Is there a way to divide such ads and Add ons in a screen and automatically display search results in the other

  Original title: twomonitorsononepc

  I have two monitors on my pc is there any way for example divide ads and Add ons in a screen and automatically display search results in the other.

  or if facebook were used cat into one screen and status on the other screen please

  Hi Richard,

  What is the operating system installed on the computer?

  It seems that you need to divide the same application in several windows and place them in different monitors. Is this correct?

  Unfortunately, it is normal and you can not split the same application on two different monitors.

  Hope this information helps. Get back to us if you have more queries about Windows.

• I want to stop windows automatic download of files upgrade. It eats my internet time and money

  I want to stop windows automatic download of files upgrade. It eats my internet time and money. It serves much purpose in home edition when working on simple office work. According to me, that it is only required when the server is used and a lot of office are carried out. Help, please

  Click Start / Control Panel / Windows Updates / corn on the left, click on 'change settings '. In the drop-down list, select never "Find updates".

  This will stop the automatic download and installation of updates, but still allow you to manually run Windows Update.

  J W Stuart: http://www.pagestart.com

• Add a line automatically when a page loads

  db11gxe, apex 4.0, firefox 24,

  Hi all

  I have a master form / retail, the shape of the table is displayed in the page but without lines, I have to click on the button 'Add the line' to view the lines, and that's the problem,

  I want to see at least a line or more when I go to this page tab or when it loads?

  It is written like this

  JavaScript:AddRow();

  Thanks, it worked

• When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go of the mouse button and try to select more it goes to Negative (-) and removes all selections I made and won't allow me not one

  When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go the mouse button and try to select it goes to Negative (-) and removes all the selections I made and not will not let me add again. I never had this problem before, you usually need to hold down the Alt (or Option MAC) to subtract from selections. No one knows what happened or how to fix this problem, maybe a setting I accidentally hit? Thanks for your suggestions! :))

  Look at the options of quick selection - particularly the four icons on the left.

• I need to find all of the XML elements and add a line break for the text of each of them

  I need to find all XML elements and to add a line break the text of each of them.

  Is it possible with a script?

  Try this piece of code as it is. I hope that's what you want...

  var myDoc = app.activeDocument;
  var inddRooElement = myDoc.xmlElements.item(0);
  var xPathElements = inddRooElement.evaluateXPathExpression("//*");
  var elementCount = xPathElements.length;
  for(var eId=0; eId
  ----------------
  Green4ever