Add a new host in already created vDistributed Switch
I want to add new host in distributed Switch but I created distributed in New Data Center switch.
You can help... How can add new host in already created vDistributed switch.
Thanks for the reply. My problem has been resolved. In fact, I created vDS with option "vSphere Distributed Switch Version 5.1.0" and tries to add the version 5.0.0 of the host. Now, I added the host in vDS after upgrade the version of the existing host machine.
Tags: VMware
Similar Questions
-
Add a new column in a CREATE - AS SELECT statement
I create a table using a select in an existing table. I would also like to add a new column (with nulls for all records). Is this possible? What is the syntax for this column?
Thank you
Kevinuser10856100 wrote:
I create a table using a select in an existing table. I would also like to add a new column (with nulls for all records). Is this possible? What is the syntax for this column?Thank you
KevinKevin,
In any case, create table will not accept one byte NULL for the column declaration.SQL> create table e(empno,ename, sal, new_co) as select empno,ename, sal, to_number(null) from emp; create table e(empno,ename, sal, new_co) as select empno,ename, sal, to_number(null) from emp * ERROR at line 1: ORA-01723: zero-length columns are not allowed SQL> create table e(empno,ename, sal, new_co) as select empno,ename, sal, to_number('12') from emp; Table created. SQL> desc e Name Null? Type ----------------------------------------- -------- ---------------------------- EMPNO NUMBER(4) ENAME VARCHAR2(10) SAL NUMBER(7,2) NEW_CO NUMBER SQL> select * from e; EMPNO ENAME SAL NEW_CO ---------- ---------- ---------- ---------- 7369 SMITH 0 12 7499 ALLEN 0 12 7521 WARD 0 12 7566 JONES 0 12 7654 MARTIN 0 12 7698 BLAKE 0 12 7782 CLARK 0 12 7788 SCOTT 0 12 7839 KING 0 12 7844 TURNER 0 12 7876 ADAMS 0 12 EMPNO ENAME SAL NEW_CO ---------- ---------- ---------- ---------- 7900 JAMES 0 12 7902 FORD 0 12 7934 MILLER 0 12 7369 SMITH 0 12 7499 ALLEN 0 12 16 rows selected.
HTH
Aman... -
In the vSphere web 5.5 client, which is now where he should go to add a new HARD drive when you upgrade the VM version to 10... When I add one, I do not get the option to change the disk configuration. Any ideas as to why? It is an engine out of VM, with no snapshots:
The virtual machine lives on a NFS datastore with no HW accel. ? If so, that would explain it.
/ Rubeck
-
DVD Maker... How to add other files in an already created DVD
Home Premium SP2
I created a DVD using Windows DVD Maker in a rewritable DVD.
How can I add several files into it?
It was just still images in the DVD.
Thank you.t-4-2
After you create a video DVD you can not change it.
Thank you.
I found a way... save the project as MSDVD after DVD is created.t-4-2
-
Add new host esxi 5.1 for the existing cluster of vcenter
Hello
I would like to add a new host Virgin esxi 5.1 to an existing cluster from the vcenter. What are the things that I have to preconfigure on the host before add you it? I configured the network already, storage will be implemented when I add it to the cluster, right?
So, what I ended up doing was just set up time, networking and dns. I then added the host while he was in maintenance mode. I have a Compellent SAN storage and im using a folder in compellent to map all my Lun, then I can just add a new host in this folder, and it will automatically map all volumes to the newly added host once I go into vmware and make a new analysis on the FC HBA host (do FC fabric SW zoning first of course). I then added a file .locker on one of my SAN LUNS scrach location/newspapers. She's.
-
VSphere Orchestrator (vco) - problem to add a Powershell host
Hello world
I am currently set up a VSphere Orchestrator server and I have a few problems to add a new host via WinRM with Add a PowerShell host model.
I followed this tutorial:
I can connect with Powershell to a second server HTTPS but not with the vco...
This is my setup:
PS WSMan:\localhost\Client> winrm get winrm/config Config MaxEnvelopeSizekb = 500 MaxTimeoutms = 60000 MaxBatchItems = 32000 MaxProviderRequests = 4294967295 Client NetworkDelayms = 5000 URLPrefix = wsman AllowUnencrypted = true Auth Basic = true Digest = true Kerberos = true Negotiate = true Certificate = true CredSSP = false DefaultPorts HTTP = 5985 HTTPS = 5986 TrustedHosts Service RootSDDL = O:NSG:BAD:P(A;;GA;;;BA)(A;;GR;;;IU)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD) MaxConcurrentOperations = 4294967295 MaxConcurrentOperationsPerUser = 1500 EnumerationTimeoutms = 240000 MaxConnections = 300 MaxPacketRetrievalTimeSeconds = 120 AllowUnencrypted = true Auth Basic = true Kerberos = true Negotiate = true Certificate = false CredSSP = false CbtHardeningLevel = Relaxed DefaultPorts HTTP = 5985 HTTPS = 5986 IPv4Filter = * IPv6Filter = * EnableCompatibilityHttpListener = false EnableCompatibilityHttpsListener = false CertificateThumbprint AllowRemoteAccess = true Winrs AllowRemoteShellAccess = true IdleTimeout = 7200000 MaxConcurrentUsers = 10 MaxShellRunTime = 2147483647 MaxProcessesPerShell = 25 MaxMemoryPerShellMB = 1024 MaxShellsPerUser = 30
PS WSMan:\localhost\Client> winrm enumerate winrm/config/listener Listener Address = * Transport = HTTP Port = 5985 Hostname Enabled = true URLPrefix = wsman CertificateThumbprint ListeningOn = 127.0.0.1, 169.254.152.175, 192.168.1.139, ::1, 2001:0:5ef5:79fb:2087:3306:fde2:7302, fe80::5efe:192.168.1.139%14, fe80::2087:3306:fde2:7302%15, fe80::c19d:d401:ff68:98af%13, fe80::c407:cc5e:43dc:6909%18 Listener Address = * Transport = HTTPS Port = 5986 Hostname = host-vsphere.urbanvirtu.local Enabled = true URLPrefix = wsman CertificateThumbprint = 4f00d909810f619876bf5712a22e0fb21382d628 ListeningOn = 127.0.0.1, 169.254.152.175, 192.168.1.139, ::1, 2001:0:5ef5:79fb:2087:3306:fde2:7302, fe80::5efe:192.168.1.139%14, fe80::2087:3306:fde2:7302%15, fe80::c19d:d401:ff68:98af%13, fe80::c407:cc5e:43dc:6909%18
If I try to connect from a second server via Kerberos with HTTPS it works:
PS C:\Users\Administrator> winrm identify -r:https://host-vsphere.urbanvirtu.local:5986 -a:Kerberos -u:administrator -p:password IdentifyResponse ProtocolVersion = http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd ProductVendor = Microsoft Corporation ProductVersion = OS: 6.3.9600 SP: 0.0 Stack: 3.0 SecurityProfiles SecurityProfileName = http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/basic, http://schemas.dmtf.org/ wbem/wsman/1/wsman/secprofile/https/basic, http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/spnego-kerberos, h ttp://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/https/spnego-kerberos
But with the vco I:
Name: test
The Host/IP: Home - vsphere.urbanvirtu.local
Port: 5986
Type remote PowerShell: WinRM
Transport protocol: HTTPS
Authentication: Kerberos
Session mode: A shared Session
User name: administrator
Password: password
Someone has had this problem before? What I did wrong?
Thanks in advance for your help.
Best regards
Jean
Based on the log, I see that "Connection refused:" error was connected to the kdc parameter in the krb5.conf file and you have already defeated it.
Now, if I understand 'Add a PowerShell host' the workflow remains in working condition and does not end.
This behavior I observed in the case of PowerShell plugin 1.0.3 is trying to connect to PowerShell host running PowerShell 4.0.
Would you please provide version of
the PowerShell vCO plugin version
PowerShell host - Windows Version
PowerShell host - PowerShell version
-
NFS share for one (1) added when adding to a new host in the existing data center
I'm sure it's a simple answer, but I've been beating my head on the wall, trying to find a solution. The scenario is as follows:
1 Vcenter has several hosts in different groups. All built at the same time with a NFS share that is shared among all.
2. I add a new host to the data center (I tried independently and also added to a cluster as well).
3. the new host sees its local disk as a data store, as expected, but I have to add the shared NFS datastore.
4. at the level of the host, I go to configuration-storage-add storage and the NFS share.
It shows and normal with NFS (1) as the name. I can't rename it as it says THAT NFS already exist. I understand that there are in the vcenter DB, but how to add this new host or host an existing environment and maintain the name of the NFS share? vCenter 5.5, 5.5 esxi
Thanks for your help
Neil
finally found the problem,
the mounting data store I used FQDN.domain.com /Datashare
I needed to use the FULL domain. DOMAIN.COM /Datashare
Plugs in the name of area COMPLETE the variance in the symbolic name that caused the problem.
-
Adding a new host to the existing cluster
Hi all
The existing cluster has a connected SAN. Should what precaution I look forward to add a new host to the existing cluster? I did research that we should physically disconnect the HBA before adding, I don't know what it is to be honest.
Any help / idea would be highly appreciated.
Concerning
VDZ wrote:
Thanks a lot, guys
Please, how can one more thing I change the host name?
Appreciated all your help
Kind regards
Hello
Once the host is already in the vCenter inventory, you cannot change it, you must disconnect host to vCenter, delete the inventory and add it again using a different name,.
for example, if you specify IP during the connection wizzard, it seems in vCenter inventory under an IP address, if you want it to be visible as a hostname or a domain FULL, during the wizard name you used its hostname or FULL domain name
See you soon
Artur
Please, do not forget the points of call of the "useful" or "correct" answers
-
Replacement of host existing with the new host/material
We are trying to replace our old 5.0 ESXi hosts that cannot be upgraded to ESXi 5.1 with new hardware that will support ESXi 5.1 and beyond. Existing hosts are members of a cluster of vCenter vCenter has been updated to the latest version We are preinstalled ESXi 5.1 on new hosts and tried to set them up according to the configurations of existing hosts, except for host names and network IPs management.
First of all, are we on track to replace existing hosts?
Second, what are the next steps we would take?
We have read the various messages that seem to follow the steps below, but want to ensure that our incense are applied correctly, we don't miss any major or minor measures, for iSCSI, reusing names existing ESXi hosts and IPs or something else causing the replacement to fail.
1. the vMotion VMs to host existing to another host
2. remove the existing host to vCenter
3. stop the existing host
4. turn on the new host
5. Add the new host to vCenter cluster
6. apply the configuration changes
7. the vMotion VMs to new host
8. follow the same steps in the next new host
We lose all the steps?
Aloha, you were right, this magic file is called state.tgz: VMware KB: locally to restore a configuration of ESXi sauvegardΘ state.tgz
-
Adding new host ESX in VCD 1.0
Hi all
I wanted to know the procedure to add the new host Esx VCD and how to increase resources for the installation of the existing cloud.
Thanks in advance
AshokAdd the host to the Cluster support required in vCenter provider vDC, ensure that networks and required data warehouses configured on this host, and finally as a system administrator in vCD under surveillance & -> resources vSphere management-> Hosts, prepare the new host ESX (i).
-
About 1 month ago received the message "Server error" sync a new device (Virtual Machine), I'm sorry, but I did not copy the exact message, but remember you that the notice was to try later. Long story short, after 3 days worth of 'try later' with the same error and many users have the same error on innernetz that I decided to delete my acct sync & start reading. BAD MOVE.
When you try to delete the account I get this really fv # "cutesy" stupid $ing Mozilla message (screenshot):
I AM NOT AMUSED.Trying to create a new account receives «already in use»
NO AMUSED2Synchronization of compensation data "claims" successfully cleared. (How can that be, if the "dinosaur is the treadmill power off" at first?) Again, I'M NO FUN 3
A quota increase request reveals 0.0 k stored: NO AMUSED4
At this stage (MORE than a month later) in case you didn't notice, I am clearly NOT FUN, not to mention the being without the ability to sync my devices. Next step is to empty Firefox, but reluctantly, for Chrome or any other browser. I can NOT simply continue to use ANY browser without this vital function, and the State of my previously stored data sync 'missing' being so flippantly described BY YOU as "out of the treadmill" causes me MAJOR grief... had HUNDREDS resetting passwords, etc... let... you guessed me it... NOT AMUSED.
Please advise as soon as POSSIBLE. TYVM.
EDIT TO add: rank military security? If true, the sky help us...
I am happy to read that.
The team has pushed some changes that fixed some errors few users like you were getting while trying to delete the data from our servers.
We want to give freedom to our users to decide if they want or do not want to delete their data. In this case, technical difficulties prevented some users to do and we are sorry for this topic.
Go ahead, take into account that our servers store the data permanently and databases are cleaned if the stored data does not within a reasonable period of time.
-
Add a new ipsec connection to an interface (which work already in another session)
Hi, guys like tittle says:
I already have a session running ipsec.
Now, I need to set up another with a different peer ipsec tunnel and traffic not related.
Documents mention that it is not possible for re-branded, more than one encryption in an interface card.
I have only a public interface, so how do you achieve this?
BTW:
I need also of course on the config... I can't turn the existing connection.
Here is my config.
**********************************************************************************************************
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
address of isakmp crypto key [Council] 200.222.222.1
!
Crypto ipsec transform-set esp-3des esp-sha-hmac MYTRANSFORM
!
MYMAP 10 ipsec-isakmp crypto map
Description "vpn site to site of my remote"
defined by peer 200.222.222.1
game of transformation-MYTRASNFORM
match address 150
!
interface GigabitEthernet0/1/1.10
encapsulation dot1Q 10
IP 222.111.1.1 255.255.255.128
IP access-group 170 to
crypto MYMAP map
!
Extend 150 IP access list
10 permit tcp host 172.24.3.1 eq 8888 host 172.22.0.1 (2032 matches)
20 permit ip 172.24.3.0 0.0.0.255 host 172.22.8.16
30 permit ip 172.24.3.0 0.0.0.255 host 172.22.5.41
IP 172.24.3.0 allow 40 0.0.0.255 host 172.22.6.160 (64 matches)
Any help on that would be preciated,
Thank you!!
Leo.
Hello
Essentially, you use existing map of Crypto
So looking at your existing configuration
- Add a new "crypto isakmp policy x" UNLESS the existing matches the parameters of new connections also
- Add a new "isakmp crypto key" for this new peer configuration
- Add a new configuration of "crypto ipsec transform-set" , UNLESS the existing matches the parameters of new connections also
- Add a new ' access-list ' that defines networks the and remote for this VPN L2L
- Add a new 'MYMAP x ipsec-isakmp crypto map' to the existing one
If you could add something like this to the existing "crypto map"
MYMAP 20 ipsec-isakmp crypto map
Description Connection 2
defined peer x.x.x.x
transform-Set
function address
In particular note the number used in the foregoing 'MYMAP 20 ipsec-isakmp crypto map'
So to my rest of understanding of configurations, you add as usual, but for the Crypto map you will need its own number sequence/number/order number.
Also do not forget to add NAT0 / configurations NAT Exemption.
Hope this helps
Remember to mark a reply as the answer if it answered your question.
Feel free to ask more if necessary.
-Jouni
-
Hello
I have an emp_job_det with a, b, c columns table. Note that this TABLE ALREADY has DATA OF THESE COLUMNS
IAM now add a new column "D" with forced not null
Fistly I alter the table by adding the single column "D", if I do, the entire column would be created with alll of nulls for the column DEFAULT D
ALTER table emp_job_det Add number D; -do note not null CONSTRAINT is not added
Second... If I try to add the constraint not null, get an eoor as already conatained null values...
(GOLD)
In other words, if I put the query
ALTER table emp_job_det Add number D NOT NULL; -THROWS ERROR AS TABLE ALREADY CONTAINS DATA
So my question is how how can I add a new column with a constraint not null, table already has the data, without falling off the table
Please help me on this issue...
Add the column without constraint, then fill the column. Once all the rows in the table are given in the new column, and then add the constraint not null.
-
How to add a new application language that already exist
Hello
We are currently implementing HFM Fusion 11.1.1. We had a request to add a new language to an application that already exist. Our user will need to see a 3rd language.
How can it be done?Descriptions of language are part of the application profile. This file cannot be changed after that application was created. Therefore, you must create a new application and reload your metadata, security, rules, etc. (including data) in order to ensure that this change is taken into account.
-
Mail creates a new contact for already existing contact card
I recently find cards duplicate in my contact list that were apparently automatically created sort of correspondence. If I e-mail to Joe Blow, whose address is [email protected] in my Contacts, the e-mail address will be displayed without the name attached to it. The courier will say "to: [email protected]"instead of "Joe Blow.". " I'm in my contacts and see the two cards, one with the name and address and whatever other information that I have to contact and a second map which is completely empty except for the e-mail address.
I had two recent changes. I upgraded from Yosemite El Capitan and my employer like us all on a Microsoft Exchange Server. As far as I know, the problem above isn't to Exchange. I see them duplicate that in my Mac app Contacts contacts, not in the list of Contacts online for the Exchange.
If anyone knows what is happening and how I can stop the Contacts for the creation of new maps for already existing contacts, I'll be very grateful to hear from you.
Rob
Please open Contacts preferences window and select the general tab, uncheck the box marked
See the establishment of contacts in the mail
See if there is an improvement.
Maybe you are looking for
-
Installed the game 9 GB (Obduction) but I'm not.
I downloaded a massive 9GB game called "Obduction" and then follow the steps to install it. At the end of this installation, which ended while I was away from the computer, a window was left with a large green checkmark telling him "Installation was
-
HTTPS connection fails behind proxy company
Hello as I upgraded FF 4 beta 12, I can not connect to https without mre sites (behind proxy of the company).
-
I reformatted my computer with windows 7 and internet explorer 9 is not my games .it installed msn, which I can do on this problem
-
BlackBerry Smartphones change of SIM card
I bought a BB 8520 at the United Kingdom locked to Vodaphone network. I would change to Orange here in Spain network. However, I have only a chance of more than ten to change provider! If I install a 'new' vodaphone SIM card purchased in Spain (on V
-
Oracle Multitenant - interesting anomaly of ID of container for tablespaces
Let's say we have a container named cdb1 with some inside containers Multitenant database:sys@CDB1 > select con_id, name of the containers of v$.CON_ID NAME---------- ------------------------------1 ROOT OF $ CBD2 SEEDS OF $ PDB3 PDB1_1Cool, the