Add a new user administrative "local."

Similar Questions

• Windows 8 on my menu settings pc no add a option to add a new user account

  I created a user account from Microsoft and a local account, I see no option to add a new account on the pc settings page.

  I created a user account from Microsoft and a local account, I see no option to add a new account on the pc settings page.

  Hello

  If you are connected with a nonadministrator account, you see not the user has added in the PC settings.

  You must be logged in with an administrator account to add a new user account.

  Concerning

• Add a new user of Runtime

  I googled and was looking for a documentation with a few images/image of how to add a new user to tide but some not found. I was wondering if any of you can give me a screenshot of how to add a new user to tide. my access does not add/edit a runtime user.

  Thank you very much
  Warren

  Hey Warren,

  You should communicate with a person with security privileges to grant you access to adding/changing user tide

  Administration - users.jpg

  

  Once granted, you should then be able to add users - start clicking on the box with the Green more on top to add a new user.

  User/group name = user/group name

  Full name = family name, first name

  Domain = AD, empty if Unix, or domain name

  Then select security policy: Super users, Runtime user only or other

  Users of runtime tab to specify which TIME users access the user/group, the agent tab to specify which users DURATION agent has access. Another tab allows you to specify the telephone number, electronic address of the group/user. If the runtime user needs to connect to a Windows agent, then the windows / FTP password field must be filled in the password tab. And if the runtime user needs to connect to a Unix agent, then the password fields can be left white.

  user - definition.jpg

  

  Just give it a try.

  ARO

  The Derrick

• I get a "cannot add that email address" when you try to add a new user. I have enough licenses available.

  I get a "cannot add that email address" when you try to add a new user. I have enough licenses available and was able to add more users later without error.  I have 3 email address that returns this error message.  I tried to add each several times that produced the error message every time.  Connected out of the session and back on and the error message every time.

  It is likely that these e-mail addresses already exist in the eSign environment and you are not allowed to add these emails.

  Please contact support about it, which can help with that.

• FDM - cannot add a new user

  Hi all
  
  Recently, we migrated to version 11. When you try to add a new user in maintenance by the user, a dialog box appears and prompts you for the user name. However, the next box "Username" is an empty combo box and takes no inputs. When click OK, the message "" error: Please select a username! "was received."
  
  Any suggestions, what can be the cause?
  
  Thank you
  T.T.

  FDM in version 11 uses shared Services for the provisioning of users. You only assign locations within the maintenance by the user. When a user is supplied with shared services for the application of FDM, on which they will then appear in the drop-down list box when you click adds a new user.

• I can't add a new user in my account Administration Panel, why?

  I have been using professional DPS for awhile, but now I'm struggling with it. I was able to create new users and create then assigned the user to the applications that I added before, but now I can not do it more.

  Even if it is a new Adobe ID, the problem of still images. I deleted the current users and then I tried to add and no problem occurred.

  I don't know what to do, please help.

  See http://status.adobedps.com/?p=840 for an update on this issue and a solution that will allow you to complete the process of adding a new user.

  Neil

• Why can't I add a new user in my DPS account Administration Panel.

  I get this message: the e-mail address entered cannot be added as a user Digital Publishing to this account. Please choose a different Adobe ID or create a new Adobe ID for the user.

  I don't know what to do. Need to create APP accounts. Help, please.

  See http://status.adobedps.com/?p=840 for an update on this issue and a solution that will allow you to complete the process of adding a new user.

  Neil

• Add a new user has produced two news users.

  I have a problem with Windows Explorer to crash. On one of the posts here, it was mentioned to set up a new user and see if the old user data are the issue. Well, I did and when I did set up the new user, I created, but also an additional user with the same name with a dot + my computer name. This username is not launched signature or it will appear in the screen of the user of the control panel. Just remove the additional user name files in Windows Explorer?

  Hello

  1. is the problem with Windows crashing solved?

  Method 1: Run a virus scan

  I suggest to download the Microsoft security since the link Scanner and performs a search on your system. Check if the problem persists.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Microsoft safety scanner ends ten days after downloading. To re - run a scan with the latest definitions of anti-malware, download and run Microsoft Safety Scanner again.

  You can delete the files in the user account and create a new user account after the Virus Scan.

  Method 2:

  Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  I suggest to follow the link below and follow the steps and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  Also, I suggest you to follow the link below and check if it helps.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Let us know if it helps.

• Add a new user through Host profiles

  Hi guys,.

  I was wondering if anyone knows if I create a new user on a single ESXi host and use this host as my host of reference for a profile of the host. If the new user is contained in the profile of the host, and every time the profile is applied it will be applied to all other ESX host?

  Thank you

  D

  Not with a profile of the host, read the doc tech following, which explains what is included in Host Proflies.

  http://www.VMware.com/files/PDF/Techpaper/VMW-host-profiles-tech-overview.PDF

  If you want to manage the creation of users who will have to do with a script.

• Try to add the new user account

  I had three user account and I deleted an a TI won't let me add more. I can use my guest account annd. He wants to let me log in if I do createpne

  Hello

  Are you logged on as ADMINISTRATOR? If so the account could be damaged.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  ----------------------------------------

  Or use the hidden ADMINISTRATOR account:

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Slowness of console SCOM 2012 for new users

  We have installed SCOM SP1 2012. When we add a new user to the administration in the user role, and when the user logs on and opens the console then the SCOM console that the user works very slow. Please suggest if no update or workaround is needed.

  Kind regards
  Ashvin Torvi

  Hi Larry,

  This problem would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en-us/category/systemcenteroperationsmanager

  Thank you.

• Create a new user in Vista, but does not appear under c:\Users[user-name]\Music\iTunes\iTunes /.

  I tried to add a new user of Vista. The name and icon are created in the login screen, but when I tried to access the new user account, I received the message "user profile service logon failedthe. User profile cannot be loaded.
  I read the responses on the copy files to the user overall, but when I looked in the c drive, the new username has not been added. What should I do now?

  Hello

  The problem is probably damaged the ADMIN account, you were when you created the user account.

  Log on as an ADMINISTRATOR or use the HAA below and REMOVE the user account that you created. Then move forward
  as if your ADMIN account (the one you used to make this account user) has been corrupted. Once you are sure
  It is OK then DISABLE the HAA - login to your ADMIN account and make a different for USER account
  see if everything is OK.

  Try these to erase corruption and missing/damaged file system repair or replacement.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then do-, use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the
  same for other accounts that may be difficult. Then if necessary you can also reset your password
  in the accounts. Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Commissioning of new users on TC6.2 CLI

  Hi all

  We use CUCM for provisioning where as far as I know, all users, except admin, should be configured manually to form endpoints.

  Would it not possible to supply new users through endpoints TC6.2 CLI. Currently we are able to add users only via the Web interface in "Configuration > User Administration > add a new user...". ».

  I crossed Administrator's guide and the guide to the API and found nothing on this subject. Can someone help me?

  Concerning

  Ondrej

  Ondrej salvation,

  Currently, it is not possible to create the users of TC endpoints from the web interface. Cisco has even removed the 'adduser' from the root so CLI command. So it's really not possible.

  If you really need to add users from the web interface, I suggest you to raise a feature request.  =)

  Concerning

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• Adding a new user in CLI for VCS

  Hi guys,.

  I have a simple question, is it possible to add a new user to the VCS - C and VCS - E, who has access to the CLI?

  We want to build a script that does the xconfiguration command and saves the output to a text file. To do this, we wanted to create a user that has only read access in the CLI.

  Is there a way to do this?

  Thanks Jannik

  Hi Mike,.

  Yes, the user created this way can not access the CLI but will have access to the API. Currently, you can have a user who has access to the Internet but not CLI. This must go as a feature request.

  Also I would like to save the vcs using cli and by running the command 'xconfig' is not the recommended way to backup, because it doesn't actually do a save as local CERT, provisioned data etc.

  so the best way would be to backup from the web gui under the option of backup & restore.

  see you soon

  Alok

• Problem adding a new user?

  Last month, I added 18 users on my account first Cap I used a CSV file that included the e-mail account of the Manager of the learner to identify the contractor. No problem even if the majority leader was NOT as a user of Captivate, only his e-mail account was added as the supervisor of a Manager.

  Today, I can not add a new user (after the release of the first of February 2016) because the Manager of the person is not already in the system.

  However, my CSV file of origin listed the same administrator (using his email account) as the supervisor of a Manager throughout the world in the CSV file.

  So what has changed? And what do we do when we want to add a person who does not have a supervisor? As the CEO of the company? At some point, we have the ability to add a person who is not a supervisor.

  Am I missing something obvious?

  Hello

  To add a user who is not any Manager as CEO, simply add him as a user and under e-mail ID of his Manager just type 'ROOT' or 'company name '. You can consult the following link: what I can add users in bulk? What is CSV upload? Adobe Captivate help main

  Kind regards

  MILIN