Add an esxi host

Similar Questions

• vCenter crashes when you add esxi hosts

  When I add an esxi host to vcenter, it crashes when it comes to installing the agent vcenter at the bottom of the screen. Then my vi client will expire and say he lost the connection. What of weird is that my vcenter is just a virtual machine sitting inside the physical esxi server, I am trying to add. My connection is both high speed broadband as well. I don't understand not for vcenter IN the esxi server, I try to add, you would think that the connection should be fairly quick. My vcenter vm using windows xp pro 32-bit.

  When you run the add in vCenter you are connected to the local ESX and vCenter through the vSphere client?  I don't think that cause this problem, but if you are connected to two, during the add, delete the vSphere client connection in the ESX and try to add it again.  In addition, if you publish newspapers at the time of failure:

  ESX

  / var/log/vmkwarning

  / var/log/VMkernel

  var

  vCenter

  Journal of vpxd

  Is this the only ESX add that causes the problem?  You can VMotion the vCenter to another ESX Server and try to add the ESX problem?

• Cannot access ESXi host in Vcenter after moving to accommodate different subnet

  I moved a different host EXSi 5.5 on a new subnet at a physical site.  The host has been identified by IP not the DNS name.  After the start of Vcenter, I realized my mistake.  The host is always identified by the old IP so it appears as disconnected.  I was hoping I'd be able to simply change the identification of IP address, but have not been able to see how to do this.  I also tried to remove the host (this configuration has a data center and a host), but I can't do it.  I can't add the host (with the new IP address) I get an error message that the data store is identified with the original host.

  Is there an easy way to this?

  Welcome to the community - you need to remove the old entry in your inventory (using the command delete inventory) and then re-add the ESXi host FULL domain name.

  I also moved it to a more appropriate forum-

• Problem adding free ESXi host of AD domain

  I have previously create the computer object in active directory. I then connect 5.5 ESXi free edition host by using the .net client, from there I can join my domain host name successfully.

  

  But try to do the same to PowerCLI when you are connected to the host as root, you receive an error

  Get-VMHost | Get-VMHostAuthentication | Set-VMHostAuthentication -Domain "domain.com" -Credential (Get-Credential) -JoinDomain
  

  Game-VMHostAuthentication: 24/03/2014-16:16:15 Set-VMHostAuthentication

  The current permit or ESXi version prohibited the execution of the requested operation.

  On line: 1 char: 41

  + get-vmhost | Get-VMHostAuthentication | Game-VMHostAuthentication-domain

  " ...

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~

  + CategoryInfo: NotSpecified: (:)) [game-VMHostAuthentication], Re)

  strictedVersion

  + FullyQualifiedErrorId: ViCore_SystemManagementServiceImpl_JoinDomain_Vi

  Error, VMware.VimAutomation.ViCore.cmdlets.Commands.Host.SetVMHostAuthentication

  ---------------------------------------------------------------

  I see the error indicates "current license or ESXi version prohibited the execution of the operation requested." but it works since the .net client and I have not read anything indicating that you cannot add to esxi hosts free domain. I also used JoinDomain_task method and you still receive the same error

  $ADCreds = Get-Credential
  $Domain = "Domain.com"
  $AuthObj = Get-View -Id 'HostActiveDirectoryAuthentication-ha-ad-auth'
  $AuthObj.JoinDomain_Task($Domain, $ADCreds.GetNetworkCredential().username, $ADCreds.GetNetworkCredential().password)
  

  We the ESXi free license limits is the fact that there not a 'API write. "

  This means no changes through CLI, PowerCLI and other tools that use the API.

• Cannot add 6.0 ESXi host to vCenter 6.0

  Hi guys,.
  I'm having a problem where I can not add any ESXi 6.0 host to vCenter 6.0. I can add an ESXi 5.5 without problem.

  I have the error that I get in the vpxd log is:

  2015 06-18 T 16: 36:37.312 + 01:00 info vpxd [03624] [sub Originator@6876 vpxLro = 120602 ca opID =] [VpxLRO] - tache-interne-69093--datacenter-26--vim BEGIN. Datacenter.queryConnectionInfo--524f7656-a68d-ef60-05e7-f24ec8a5f1b5(52359e42-f098-7b77-bc82-0cff38aa6ff9)

  2015 06-18 T 16: 36:37.314 + 01:00 vpxd error [04352] [Originator@6876 = 000001-HttpConnectionPool sub] [ConnectComplete] connection failed for < cs p:0000000008c8bfb0, TCP:192.168.0.12:443 >; CNX: (null), error: class Vmacore::Ssl:SSLException(SSL_Exception:_error:140000DB:SSL_routines:SSL_routines:short_read)

  2015 06-18 T 16: 36:37.314 + 01:00 vpxd error [03624] [sub Originator@6876 = opID httpUtil 120602 ca =] [HttpUtil::ExecuteRequest] error in sending request - SSL Exception: error: 140000DB:SSL routines: SSL routines: short read

  I can ping and resolve all ESXi host and checked the SSL certs and they look good too.

  Any help would be appreciated

  Dougie cordially

  Found the problem as vCenter 6.0 version I was running. I was running an older version of the VC and the current version of ESXi.
  Downloaded the current version and reinstalled and all good.

  Dougie

• Cannot add ESXi host to vCenter Server

  Hello

  I created a home set up a VMware datacenter for study purposes. I currently have 2 virtual machines: an ESXi host with vCenter Server Appliance deployed on this subject.

  I configured the server vCenter through web interface device and I have connected using vSphere Client.

  I created a data center, but when I try to add a host, I get "ERROR: the request exceeded."
  Connection with vSphere client directly to the ESXi host works.

  I can connect using SSH to the ESXi host.

  I have disabled the firewall on the ESXi host.

  I have read many articles on the kbase but nothing helped me to solve this problem.

  You have any ideas?

  I finally got to understand.

  It seems like my vmware workstation is not connected to the esxi as a physical host in my local network host, and so I was able to ping it unit of vCenter Server (but it worked the other way around, and that's why I thought it was ok).

  After the connection to the physical LAN of VMware workstation settings, everything worked fine.

• Add a 5.1 ESXI host to vcenter server 5.0

  Hi all

  I just installed an esxi5.1 host and tried to add in vcenter server 5.0 without success.

  The error is:

  A general error occurred: Timed waits vpxa to start

  Is it possible to do? If not, is documented somewhere? I searched a lot and found nothing relevant.

  The installation was made using an iso file, the new facility, in a shared, storage warehouse that has been formatted.

  I don't want vcenter server 5.1 as the impact of my infrastructure is high.

  Thanks for the help!

  VMware product interoperability matrix got the update and you would need 5.1 vCenter to manage 5.1 ESXi hosts

• Add the model mv directly from the ESXI host

  Hi gentlemen,

  I have a question:

  Is it possible to add a model from the ESXI host without using VCENTER?

  I browse to the data store and I select Add to the broom, but I get an error.

  Sort of to reach it without using VCENTER?

  The models are a unique feature of vcenter. You can try renaming the vm vmxt vmx file, this would allow to add the file as a virtual machine, not model.

  But anyway, you will not be able to use to deploy from model or the options you have for cela vcenter.

• Add the Active Directory group to the ESXi host permissions

  I am trying to add a group of ads as an administrator directly to an ESXi host (not in vCenter).  I tried to use the following code:

  $domain = "mydomain".

  $group = "mygroup".

  $svcaccount = $domain + "\" + $group

  $folder = get-file-name "ha-folder-root".

  $authMgr = get-View Manager

  $perm = new-Object VMware.Vim.Permission

  $perm.principal = $svcaccount

  $perm.propagate = $true

  $perm.group = $true

  $perm.roleid = ($authMgr.RoleList | where {$_.}) ({Name - eq "Admin"}). RoleId

  $authMgr.SetEntityPermissions (($folder |)) Get - View). MoRef, $perm)

  I get the following error:

  You can not call a method on a null value expression.

  $authMgr.SetEntityPermissions < < < < (($folder |)) Get - View). MoRef, $perm)

  When it is connected to ESX the Manager Id is "Manager-ha-authmgr" you may not use the shorter expression of Get-View:

  $authMgr = Get-View AuthorizationManager
  

  The safe way to get the Manager display is via ServiceInstance object:

  $si = Get-View ServiceInstance
  $authMgr = Get-View $si.Content.AuthorizationManager
  

  Kind regards

  Yasen Kalchev

  PowerCLI Dev Team

• Add ESXi hosts to vSphere Client

  We have 7 servers ESX and ESXi 8 servers.

  Six of the ESX servers are sitting in a cluster and the last of them is located in its own cluster.

  It's nice to manage all 7 ESX servers in a vSphere Client.

  8 ESXi servers, I've been managing each with their own vSphere Client connection.

  Is it possible to create a cluster of ESXi in vSphere and add each of the ESXi hosts to this cluster of '? Or even a "cluster"?

  I tried and I get the following error.

  "License not available to perform the operation. ESXi 4 for Host 192.168.1.10 Server license does not include the agent for ESX Server vCenter. Upgrade the license. »

  We don't have a budget to upgrade the more liceneses. I don't mean to make HA or DRS on the ESXi hosts. I'd just like to see servers running on them for purposes of inventory without having to have 9 vSphere customers open.

  We have a license entirely vCenter Server so I think we should be able to add these ESXi servers.

  Any help would be appreciated.

  You must have at least vSphere Standard license for each host you wish to manage with vCenter. Free ESXi cannot be connected to vCenter.

  ---

  MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert

  http://blog.vadmin.ru

• Add esxi host to vCenter fails

  Hello world

  I recently installed vCenter Server. I added the first host by the name of full domain with no problems at all. I tried to add the second host and he stopped the vCenter service and I have my client I disconnected.  When I restart the service and connect through the client, the host is as disconnected displaying 7 VM 12 of offline as well. All virtual machines and on the first host are always connected without any alarm.

  This server was connected to another server vCenter, more than a month and deleted successfully, I can add. I tried to unplug and reconnect several times, restart management agents and manually uninstall the vCenter agent using the console "unsupported."

  One thing I noticed, is that it gets to 8 or 9 percent, and that's when the vCenter service is stopped. I opened a second client to watch where it stops and it is just after "Select the virtual NETWORK adapter" full show then nothing.

  Any help would be much appreciated!

  Thank you

  Ahh. There is your situation.

  Stop the virtual machine. Click on remove inventory.

  Go to your other ESXi host. Browse the data store, find the folder of the virtual machine, right-click on the VM.vmx file and add to the inventory.

  It works and're you good to go.

  Conversely when you need your choice.

• Can no longer add ESXi host to vCenter but OK VI Client connects

  I removed an ESXi host in a cluster on vCenter. Now when I try to add the host (whether for the cluster or stand-alone) the add hosts Wizard appears and has the correct information, but when I cliquerai on closing, that nothing happens for a few minutes, then I get the error:

  Unable to reach the specified host... Maybe it's because this host is not available on the network, there is a problem with the network configuration or management on the host services do not react.

  However, I can connect to the host directly with the VI client and which works very well, even though the events tab displays "VFAT: 2583: Possible FAT Corruption." My copy of ESXi is on a flashdrive in a HP Blade.

  I tried to reboot the host, but it makes no difference. Several of the responses to other users of similar problems is recommended to perform "service vmware-vpxa restart" on the host, but this does not apply to ESXi. I also tried to restart the vCenter, but that makes no difference either.

  Any ideas?

  Thank you

  Will be

  Download iso hpvm-recovery on HP site and reinstall ESXi on flash drive.

  UPD: Yes, as Neil said, check your key USB HP if you bought ESXi Embedded. If you have the Green key aluminum, require the replacement of HP. And then, you definitely have to download iso that I mentioned above

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• 6 ESXi hosts can't be added to Vcenter 5.5 App

  6 ESXi hosts can't be added to Vcenter 5.5 App

  When I add the hosts drop off after 5 min or more.

  When you install or upgrade to ESXi hosts to 6.0 you cannot add them to vCenter Server Windows or device.

  It's real reason in the upgrade path, you must first upgrade the vCenter before ESXi hosts. See the sequence below:

  https://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2057795

  Thank you.

  If you found it useful and you solved the problem just mark as answer.

• Permisions required for mounting NFS on ESXi host

  Hi team,

  In our java application uses) use API VMWARE to mount the NFS datastore on the ESXi host. But to do this, we need the ESXI root permissions. Because having credentials root door reached the safety of the system, we would like to create a user with the required permissions will be sufficient to add the mounting NFS on ESXi host.

  But do not know how to see the permissions required for the Assembly of the NFS on ESXi host. Pointers would be useful.

  Thanks in advance,

  Anjana

  Hello

  Storage permissions lies in the roles of Group of data store.

  You should have a default profile role of storage in your vCenter.

  Cheque image:

  

  Hope this helps

• NFS datastore on vCenter ESXi hosts

  I'm running out of space on our NAS storage.

  Another unit would be very costly.

  It seems easy enough to add an another data store from an NFS share.

  Are there problems I should be aware of if I were to add an NFS share from a physical windows 2008R2 Server?

  I understand that, since the part is right on a SATA drive performance will be bad enough.

  I was thinking more just for backup.

  Snapshots can be taken of vm that are located on a store of data VMFS5 and stored in a NFS data store?

  There will be problems with the addition of shared NFS of different targets to the ESXi hosts.

  However, put pictures on different levels is not a good idea. Snapshots in VMware products function as a string. When you create a snapshot, delta / only modified data is written and read in the snapshot files / delta. The parent files are still used, but opened in read-only mode.

  Remember, a snapshot is not a backup!

  André