Add Checksum for Drill Down Chart

Similar Questions

• Filter to protect Devil for drill downs

  Hi all
  
  I have a line of dashboard on the region and a report with the region, as a column of dollars and a filter to the report saying region is invited.
  
  Created a dashboard included guest and report, and change in the report links drill turned on, selected from the properties of the section.
  
  When I break into the region, the report shows region, District and $. But when I try to change the prompt value, the report does not change.
  
  If I click on change button and system observed internally creating a filter on the region and implementing protected on all filters. If the filter is protected we cannot re assign the value of the dashboard.
  
  Is there a setting that prevents the application of 'Filters protected' when I dig in the reports?
  
  Thank you
  
  -Madan

  Hi Madan

  To reset the prompt values, you can use the codes below.

  For version before 10.1.3.4
  Back to [b] 'DBPage1 '.
  Back to [b] 'DBPage1 '.

  Version 10.1.3.4 and later
  

  Claire
  < div="" class="XUIPromptEntry minibuttonOn">Claire
  Note: Remove the semicolons :/ /:

  For the issue of exploration down, review your hierarchy

  Rgds

• Drilling down into charts - can someone explain the behavior it please

  Hi guys,.
  
  I'm trying to understand how a particular chart is percables "Sample Sales".
  
  The report in question is "Tiering" 8020 03 and Distribution. I circled the report that I clicked on:
  ! http://img407.imageshack.us/img407/4103/screen1c.jpg!
  
  Then he took me to the more detailed view of the same report (8020):
  ! http://img203.imageshack.us/img203/2144/screen2c.jpg!
  
  I checked the report and the Interaction property in 'Additional graphical options Menu' for this graphic has been set by default. The measure, which is be drilled percentile - and it also has defect in its properties of interaction.
  
  So I guess I have several questions:
  
  1. how this report drill level more detailed on the same report? (is it because everything is set to "Is invited")?
  
  2. why the value "Default" allow for drill-down in the chart? I tried to create my own graphics - and by default it does not trigger an exploration at all, even if there is some data at a lower level.
  
  3. can I break into place and have some content may remain relatively static - and other fields change? I saw a similar question before - where it was suggested to use the greater than 1 report in the dashboard view. (instead of combining any compound notice).
  
  Thank you

  # 2. I think that you did create hierarchies in your SPR for the dimensions and measures that you have on the report.
  For n ° 3. I think the first 3 reports in the dashboard are aligned horizantally within a section of the dashboard and "Drill in Place" has been activated on the section / meet these demands. Check the properties of the section. If you want this problem, try each report incorporated in different sections and activate the drill in place for each section where you want to drill additional but content rest remains the same.

  BTW how you paste your dashboard here? It's cool image display mode... receive your answer.

  Thank you

• DRILL DOWN REPORT for DIFFERENT SETS of DATA in 11G

  Hello.
  My requirment is to zoom with 2 sets of data report.
  My first set of data all have the chart of accounts, the second set of data transactions.
  in my report, I have 2 tables of data. With the accounts, and when I click on an account and get all transactions for the account in the second table of data.
  Anyone know how I can do this
  
  Any help would be apreciatted
  
  Paulo

  You can use the zoom of the strategy, well described by my friend Kan:

  http://bipconsulting.blogspot.com/2010/02/drill-down-to-detail-or-another-report.html

  concerning
  Jorge
  p.s if this answers your question please grant points, and then close the message

• Is there a way to get the checksum for a conditional link?

  Hello everyone,
  
  I use APEX 3.2, here's my problem.
  
  We are generating a report containing several links in option. Since we need a checksum for security issues, can we do something like this:
  

  select case when x.col1 > 2 then
                   '<a href="f?p=&APP_ID.:2:&SESSSION.::NO:2:P2_EMP_NO_SEQ,P2_EVA_NO_SEQ,P2_ANE_NO_SEQ:1457%2C1457%2C1&cs=*&CHECKSUM.*>' || x.col2 || '</a>'
            else
                   ' - '
            end  link
  from
     table x;
  {code}
  
  I need to add manually the checksum values to my links.  Do you know any way to do that ?
  
  Thank you !
  
  Leinad                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

  Use apex_util.prepare_url, scroll down in this thread for the full syntax:

  Re: Issue of APEX field validation

  Kind regards
  Malcolm.

• In OBIEE graphics, how do you drill downs work on custom forms?

  I posted this Linked In and not got an anser, so I hope someone here has an answer.
  
  I wrote a summary query / table for a dashboard to OBIEE 10.1 with a lock down (technically, it's a 'navigation') for more information. This table breaks down the data by quarter and by geography (both are columns of discipline) and I can down this drill to work just fine. But I also this table broken down by some calculated custom fields (CASE statements WHEN) that classify the revenue / risk / Upside etc. (which are not the columns or the column values in the area in question).
  
  When I add a drill down or sail depending on calculated columns, I get a full set of data... not a set of data filtered for this job here calculated. (Yes, I have all the EAST GUEST filters configured properly, and Yes formulas in queries source and destination are the same).
  
  Anyone have any ideas on how to make the zoom or the navigation works on custom formulas?
  Thank you
  Ted

  It was all done using normal responses.

  It is very important that the formulas are the same
  (They must match letter for letter case when X = Y then 1 2 other end is different from the case when X = Y then 1 2 other end ).

  Also if using the prompt in the dashboard do not forget to do the titles exactly the same thing. What I do, it of create a formula and copy it and then paste everywhere else. Keep the same column headers as well.

  Hope that helps.

  Concerning

  Chris

  Published by: ChrisMarais on June 9, 2011 19:12

• Passport system: Add support for scrolling through the physical keyboard

  Hi guys,.

  as you know peripheral Pasport is the new support feature: scrolling in the list view/Scroll through the physical keyboard. It seems that this function should work automatically, but it is not working at all in my application. It works only partially to control the display of Web pages and only on the pages of the subsites of my web content.
  Looks as the root cause of this issue is the list view must focus to handle keyboard events. OK, so the workaround can be call requestFocus() on the list view. It's a job but only until I do not touch the other control or scroll this list via the screen point of view! Or for example my app can show popup by clicking on list view and when this popup will be rejected the focus won't return to the display of the list...

  So my question is what good way to add support for this feature? Do I really need to play with requestFocus()? Or maybe there's a simple way to always keep the focus on the display of the list?
  I really need help.

  I've added a few features such as

  requestFocusForScrolling()

  then get the signal of this active tab has changed, you can call this function to get the new focus

  or on NavigationPane if returning to onPopTransitionEnded () calling the requestFocus on page function now on top

  In my Pages, I always have a few features added like connect(), disconnect() cleanUp() init() and now also at the request of focus. In a few pages, these functions are empty, but I can use them in the generic functions where I only got one Page

  ----

  not easy to touch OS oriented to add a key activated area outside the screen

  It always depends on the field with the development: think of an Image when you change the size of gestures touch on keyboard or take a look at sales-charts where you "scroll" in the months of keyboard

  Same pages may also have ScrollView and/or one or several ListView - it's do you stunts where is the update for keyboard gestures.

• When you move the timeline indicator - it deselects selected clips previously (to add fx for example) in cc2015 - why?

  Hey everybody, I would be grateful is someone could answer this for me:

  When I selected more clips to add fx for them - and try to move the timeline indicator to see if I left out the clips more, as soon as it comes to a previously deselected clip - all my selections disappear.

  It could be related to the fact that each clip gets selected when I scroll up and down the timeline without doing me anything. (No need to click on the clip so that it can be selected).

  Please someone make me know what I am doing wrong or what setting I accidentally put under tension! I want that this party

  Thank you!!!

  Uncheck the selection follows the playhead to the title sequence.

• Is it possible to add Preview for previews of phone formats?

  Is it possible to add Preview for previews of phone formats? (eg. Add the iPhone 6 and iPhone 6 sizes and resolutions)

  Yes, you can use the drop-down list to select specific phone for phone Muse preview layout.

  Thank you

  Sanjit

• When drilling down, is it possible to see all values of next one click level

  While drilling down, it is possible to see that the next level for all the level 1 values instead of just the value it's clicked?
  Is there a feature that we can activate or do differently?

  Hello

  Click on the column header name, break through all levels.

• gl_balance_F and Gl_other_F are not met for forest down?

  Hello
  
  is it not a common practice in organizations to see the summary / balance sheet and wanting to break through to the next level as to see the journal lines? I'm not interested by how knwing Pierce through/down journal lines until what subsidiary ledgers that we don't have here hv. Try to find the source for the details however.
  
  So my main requirement is when the client checks the balance, he sees amounts summaries referred to in the report. If he clicks on any amount, he should be able to see how this amount was arrived to find out the details/journal line entries. IS - it is not delivered in default OOTB financial analytics or am I missing something here? Are GL_BALANCE_F and GL_OTHER_F not joined internally?
  
  IF the above is the case, how to achieve what the customer needs? Just an idea in real time valid required. I don't have instructions step by step.
  
  Just in case it isn't clear, a transaction to the ATM is the best example I can think. If I see my balance increase/reduction of the previous month, I take a tiny transaction that shows where all I spent my money.
  
  Ahsan, any comment on that?
  
  Thank you
  Dan

  I believe in financial analytics that you have 2 options to fill the W_GL_BALANCE_F... One is directly from the source GL system, and another is calculated in the ETL process based on the W_GL_OTHER_F based on specific CAD configuration tags. Essentially, the navigation links allow you to "drill down", according to the needs from one level to the other... but from a point of view of DW, these are 2 separate operations... with 2 different granularities... which is why they are in 2 different schemas in Star. For example, W_GL_OTHER_F aura of the attributes of dimensions much more as the table. W_GL_BALANCE_F normally in dimensional modeling you do want not to "join" 2 tables of facts (at least in my understanding of Kimball). However, you can allocate attributes of a table of granularity higher as a lower granularity. Not sure if this can help answer your question.

• Difference between Master detail report and Drill Down

  Hello
  
  I want to know the difference between Master detail report and Drill Down. I'm confused about their use. Can inform you when to use what?
  
  Help appreciated
  
  Pradeep

  You must first help yourself by searching instead of these initial questions.

  Master in detail:
  As a condition of purchase order. The master is arrested in detail, and the details are elements...

  Dril Down:
  As the opening of report the report as hyperlink for more details...

  -Clément

• Drill Down in the hyperlink and return link

  Hello
  
  In one of my report (REPORT A) I am drilling down to help navigate to another report (REPORT B), and I have a 'back' at the bottom of the report.
  
  I am facing the problem depending on when I do this:
  
  Step 1: I am opening A REPORT and digging using the hyperlink to one of my column in REPORT B.
  
  Step 2: open another report, REPORT C, which has NO connection with the REPORT A or b of the REPORT.
  
  Step 3: When I click on the link 'back' at the bottom of the B REPORT, he takes me to REPORT C instead of A REPORT.
  
  How can this be repaired? Help, please. Thank you.

  Hello
  This report is and B report both are placed on different pages.
  If so, try using the back button.
  Add view narrative report and instead of the code below.
  {input type = "button" value = "Click here"
  onclick = "Window.Location ='saw.dll?" Dashboard & portal Path = / shared/Group_Folder/_portal/My Dashboard & Page = page 1 ""} "

  You can get CheminPortail of you reports when you change the dashboard page.check CheminPortail in the url of the browser after you change the dashboard.
  Don't forget to click on HTML mode narrativ

  Kind regards
  Srikanth

• OBIEE navigation/Drill Down

  Hi all
  
  I have a question about OBIEE navigation/drill down.
  
  I have 2 reports
  
  Report1 I want all data when "Subscriber sucks" and in Report2 I want all data where "Subscriber is not null.
  
  When I run Report1 data are very well and when I click on Customer Number(navigation is enable), but for the filter of the Report1 Report2 is also get past and Report2 filter is ignored.
  
  Any solution?
  
  Please help me.

  Kiran,
  Report 2, change your filter "Subscriber is not null ' and choose 'protect the filter.
  A column has no need to be 'invited' to take values, without protecting the value is replaced "is not null" to the customer number = "xxxx" value you have navigated from.
  Try, if it is correct pls brand Q responded and award points.

• Drilled down by using a composite key of level

  Hi, I'm new with OBIEE, I have this Dimension table:
  
  ORDERS (client_name, customer_surname, order_key, customer_city)
  
  I want to build a dimension with 3 levels, from the root to the leaf: CUST_CITY-> CUST_NAME-> ORDER_KEY
  When the column answers CUST_NAME I want to use for exploration down consist of name + surname, which are the 2 separate logical columns... is it possible? How could I do?
  
  any suggestion will be appreciated, thanks!

  In the logical layer of the repository, right-click in the table and choose new object > logical column, at the opening of dialog enter a name for the column, then look down the left side, there is a checkbox with the label 'Use logical columns as source', the text box below it will become white , now on the right hand side, click the elipsis (the one with three dots) button to open the expression builder, to the left of the three downstairs, click logical Tables to lay out your tables and columns. Now you can add them by selecting them and clicking the Insert button, just type a double character pipe between two columns to concatenate the.

  Ed