Similar Questions

• Download iOS 10 update once for installation on multiple devices via iTunes?

  I think remember me that it was possible and it was the best way. When I Googled it I am surprised to find there is no recent information on this (last year, although there are responses from 2012). I think this means 'no', but have not found the answer either.

  Then, download iOS updated once for installation on multiple devices via iTunes? As many people have multiple iOS devices that's probably a good idea.

  Almost certainly not.

  Each version of the product Apple has its own download.

• iTunes does not recognize my devices after the last update

  iTunes does not recognize my devices after the last update. Has crossed all suggestions from the support page (uninstalling/reinstalling driver USB, remove Lockdown folder and so on) but still no joy. iPhone continues to ask if I want to trust to the connected computer, responding 'Yes' has no effect.

  Help, please

  Thank you

  Cyana

  Found this solution here:

  Re: Does not recognize devices in iTunes on PC

  works very well

• Cannot add a device Cisco IOS - development issue?

  I try to add a router IOS (as a platform) my Hyperic (3.2.1) resources and I kept getting this error (see the following stack trace).
  
  =============================================================
  java.lang.NullPointerException at
  org.hyperic.hq.ui.action.resource.platform.inventory.NewPlatformAction.execute(NewPlatformAction.java:108) to
  org.hyperic.hq.ui.action.BaseRequestProcessor.processActionPerform(BaseRequestProcessor.java:63) to
  org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236) to
  org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196) to
  org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432) to
  javax.servlet.http.HttpServlet.service(HttpServlet.java:717) to
  javax.servlet.http.HttpServlet.service(HttpServlet.java:810) to
  org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252) to
  org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
  ....
  
  =============================================================
  
  So, I downloaded the src and it built with the following parameters of the construction.
  Windows Server 2003 SP2 (Standard edition)
  Java 1.5 update 15, Ant 1.7.0 JBoss 4.0.3SP1, PostgreSQL
  
  However, I still get the same error. After adding a few log statements, I realized that in NewPlatformAction.java ("run" method), the value of the agent is zero [agent is created by calling BizAppUtils.getAgentConnection (...)] which causes the NullPointerException in the above stack trace [boss.createPlatform (...,...,..., agent.getId ())].
  
  BizAppUtils.getAgentConnection () is essentially a block of code to check if the "IP Port string' is null or not and this string always seems to be the null value. I put some instructions to log in NewPlatformAction.java and BizAppUtils.java and have cut-and - paste a few lines of the log server below.
  
  Basically, BizAppUtils jump the complete code block that is supposed to create an Agent.
  
  ==============================================================
  
  2008-03-13 12:23:32, 537 [http - 0.0.0.0 - 7080-2] INFO [NewPlatformAction] find the type of platform [10004]
  2008-03-13 12:23:32, 537 [http - 0.0.0.0-7080-2] INFO [NewPlatformAction] platform [Cisco 1720] was created with attributes add ImageButtonBean = [null, null] cancel = ImageButtonBean [null, null] create = ImageButtonBean [null, null] Delete = ImageButtonBean [null, null] ok = ImageButtonBean [38: 10] Delete = ImageButtonBean [null, null] reset = enable ImageButtonBean [null, null] = ImageButtonBean [null, null] userset = ImageButtonBean [null, null] pageSize = null startMonth = 2 startDay = 2 startYear = 1 startHour = 12 startMin = 23 startAmPm = pm endMonth = 0 endDay = 1 endYear = 2008 endHour = 12 endMin = 23 endAmPm = null startTime = now recurInterval = recurrenceFrequencyDaily = numDays daily = 1 NumSemaines = 1 recurrenceDay=[Ljava.lang.Integer;@121e1bb recurrenceFrequencyMonthly = onEach numMonths = 1 recurrenceWeek = null monthlyRecurrenceDay = null eachDay 1 endTime = none = RID = null type = null name = Cisco 1720 location = lab description = router Cisco 1720 cpuCount = null fqdn = cisco1720.inside.eclyptic.com FPS = [{address = 10.100.1.13 netmask = mACAddress = id = 0 mTime = null cTime = null}] numIps = 1
  2008-03-13 12:23:32, 553 forms of INFO [NewPlatformAction] [http - 0.0.0.0 - 7080-2] string value for the ip port is: null...
  2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [BizappUtils] Agent ip port string: null...
  2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [BizappUtils], returning null
  2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [NewPlatformAction] after the creation of agent
  2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [NewPlatformAction] check for agent == null is true
  
  ==============================================================
  
  I have attached a screenshot ' create new platform "UI of Hyperic and my modified source files.
  
  I would really like to know if I'm doing something wrong or is this a valid bug in Hyperic?
  
  I just want to add this IOS device to Hyperic to familiarize myself with how Hyperic manages network devices. My long-term goal is to add network devices in Hyperic via an API - so pointers (or the samples/docs) to an API which allows to add devices to Hyperic is also really useful.

  Hi Michelle,

  I was able to reproduce using a fresh installation with no agent installed.  At least one officer has, on the same machine that the HQ server is fine.  We should apply rather than just displaying this message:
  "There is no agent available to treat this platform."

  Can you install + import agent and try again?

• iPod Classic stopped display work.  Work displayed in iTunes.  Updated iTunes to 12.4 but did not help.  I can see how to check

  iPod Classic stopped display work.  Work displayed in iTunes.  Updated iTunes to 12.4 but did not help.  I can see how to check and uncheck "Display work" in iTunes but not how on the iPod as others have suggested.  Need to perhaps restore and recharge.

  Long ago with including works on devices was optional, and you can sometimes fix cache work on a device by not including and then add it again. This choice has long since disappeared. A complete restoration and reloading is now the only method to recreate the cache.

  TT2

• iPhone used to synchronize with iTunes after updating iOS 10 - September 2016

  I updated my iPhone 6 with latest iOS 10 software. When I plug my phone into my macbook, it says "iTunes could not connect to the iPhone"IPhone of Katie"because an invalid response was received from the device. I've updated my macbook and iTunes, restarted all devices, tried different usb etc. ports. Everyone knows about this problem?

  Just a survey, and this alert, was there any kind of error code?

  I had the same problem and he gave me an error code 4013. I had to update the driver for universal bus on my computer and restart my computer and the phone again. I don't know if this could help you.

  Find an iTunes, error code - Apple Support

  All the best

• Cannot add my computer iTunes Match

  I am running iTunes 12.4.1.6 and OS X 10.11.5 on a MBP 13-inch mid 2009 with 8 GB of RAM. I have subscribed to iTunes game and try to add my computer to iTunes game in iTunes. Once I have click on the button 'Add this computer' and type in my Apple ID, the button remains disabled and nothing else happens. I waited as long as an hour:

  

  I tried several times. Once, after waiting about 10-15 minutes, I received the following message is displayed:

  

  My internet connection is not working properly, and I am able to connect to iTunes to update my iCloud music library with my iTunes music subscription.

  Any suggestions?

  Hello

  I suggest that you go to menu > preferences and make sure you have checked library iCloud.

  Jim

• Add Device sees wireless but printer is plugged and can reach the HTTP page on wire

  I installed my new 8000 Officejet Pro A809 with an ethernet but when I run the Wizard "Add Device" of HP, it trys to install as wireless even though I select wired and the installation fails.

  I can see the page http for the printer and it presents information healthy of mind on my printer, so I think that ethernet is currently working.

  I am running Windows XP with the FW off. The printer is on the same switch as my PC & of course, I can see the http page

  In the wizard, even if I choose ' Wired ' of course the wire works, page "Found network printers" shows that the connection is wireless. None-the-less I click next then a screen appears for "from Network Services" & it rolls well, topology, wireless services, etc., and sending a SLP request the IP address it fails & shows a picture of a wireless signal and a big red X.

  HP Home Network Diagnostic Utility says that software to connect to the network printer is missing, BUT I ran the wizard completely if a second time, I chose my camera wasn't online and it ended up OK. I ran the UPDATE of the utility & he did an update to security; I have rand again and he found none.

  Although my FW is off, I checked the ports that the FW Guide are necessary:

  I can telenet to the printer on port 9100 & 92200

  I can not telnet on port 137 139 or 427

  Ideas?
  Thank you!

  Larry Holt

  OK, plug the printer Ethernet cable must turn off wireless radio printer, but in the cases where it does not, click the button to light blue (or go to settings > network > turn off wireless on the front panel).

  Now, you don't have to bother with the add devices Wizard, we will just add it manually:

  Verify that you can access the web page internal to the printer by its IP address.  If you can not, disable firewall for your security system (not the Windows Firewall, it is usually not in the way).

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• Error code 2503/2502 trying to install iTunes or update Java.

  Original title: Error Code 2503/2502.

  I had to restore my computer to factory settings, and after I did I now get the error 2503 and/or 2502 code when trying to install iTunes or update Java.

  I tried to install in a right click on the .exe and selecting 'run as administrator '.

  I've seen other suggestions that say to check Windows Installer, but I searched for this on the computer and cannot find something called Windows Installer.

  My computer is currently up-to-date with all the updates. I am running Windows 7 64 bit Home Premium edition.

  You can check for any further development, because this post is quite old.

  http://www.google.com.au/search?q=Error+code+2503+OR+2502+when+trying+to+install&sourceid=ie7&rls=com.microsoft:en-au:IE-Address&ie=&oe=&redir_esc=&ei=u1veTvPeJo-SiAei--C2BQ#q=Error+code+2503+OR+2502+when+trying+to+install&hl=en&tbo=1&rls=com.microsoft:en-au:IE-Address&output=search&source=lnt&tbs=qdr:y&sa=X&ei=xFveTvX9NeqpiAfeve3IBQ&ved=0CAsQpwUoBQ&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=92a042cfc48e7d60&biw=1267&bih=574

  Your circumstances are the same as the original, poster or is there any new details, on which you can develop?

  You get the same errors, if you create a new user and test with it?

• My computer Windows 10 acknowledges IOS devices. ITunes will not.

  My computer Windows 10 acknowledges IOS devices. ITunes will not. I tried to start and stop the service. I uninstalled I Tunes and reinstalled. I tried different cables and USB ports. Always I Tunes none of mu IOS devices recognizing. It worked fine 2 days ago?

  Make sure you run the latest version of iTunes available at itunes.com/download

  The current version is 12.5.1

• Why my iphone is required to connect to itunes after updating wireless.

  Why my iphone is required to connect to itunes after updating wireless?

  I don't have itunes and won't.

  Is there anyway around of this or take it back to the old ios?

  More than the upgrade of the air seems to have issues, whether all connect at the same time or other problems. I had to plug my phone into the computer, update itunes to the latest, published today, then ios upgrade 10.0.1 and it is fine now. You could bring to the apple store and probably use their computers, just don't tell the computer to trust the phone.

• XLM iTunes not updated to correct location

  I have iTunes set to store my iTunes Media folder on a separate drive on my Windows PC (drive J:\ in the attached screenshot letter).

  

  However, I noticed that the changes to my playlists and library don't are not updated the XML file and the library at this place.

  Instead, the changes are sent to folder on my main system (C:\Users\HP2\Music\iTunes) disk.

  How iTunes to update these files in their location (on my backup drive J :).

  Thank you!

  For information on the Organization of the library, see library of portable split . From the sounds of things you have created a shared library that you want to solve if you want the XML in J:\iTunes be the only asset.

  TT2

• Add files to iTunes library

  My question is quite simple and easy, even embarrassing, but I just switch from windows to mac and have not understood yet all quarks. Can I play music from any folder using iTunes, without copying in the iTunes folder? Whenever I tried to add music to iTunes library it seems to copy the music files some of the folder in the folder iTunes music thingy. I had to change to a third party for this reason just music player, but would like to be able to use the stock apple made one. Thank you in advance!

  iTunes > Preferences > advanced > copy the files into the iTunes Media folder when adding to library > Off.

  However, I would advise that it is not the best approach in the long term. Have iTunes connected to scattered across media room makes it much harder to keep the library saved properly or move it to a new computer, the time is right. For general information, see make a library of portable split .

  If you want to avoid the creation of duplicates when you add content to the library then could be ~User/Music/iTunes/iTunes Media/automatically add to iTunes iTunes that add you to the library move it in the standard location in the media folder, and make sure that you have only one copy of each file. Readers of third party can access the same media folder.

  TT2

• I am trying to add my Linux netbook to my sync account, but both my windows computers will not display the "Add Device" button in one of the sync management screens

  I'm trying a new version of Linux on a net book I use to play with non windows OS. In the process of setting up the new OS install I wanted to make my Firefox account set up so that I didn't have to spend a lot of time working on something. I'm no stranger to sync of browser and several of my computers and tablets with a number of different OS tied to the account with little difficulty in including the Firefox of the previous generation of Linux that has been on the net accountant. The problem is now that on both my computers in the main, a windows 7 and a desktop tablet windows 8.1, both running the latest Firefox, I am unable to find the 'Add a device' button in the synchronization of the management screens. This includes browsers built in display options as well as the Firefox manage account page. The first gives me options to disconnect the account, go to the maintenance screen, several checkboxes that you can synchronize to the device name. The management, after the login screen, don't give me options for the disconnect, change password and delete the account. Any help to understand why the add device button seems to be missing from these two devices would be greatly appreciated.

  Please check the version of your Installation of Firefox. (can be found by clicking on the main menu, or by clicking or hovering the cursor over the help button, and then click about firefox in the submenu). According to since how long you configured synchronization you can still use the old version of sync. Firefox 29 has introduced a new (and I would add a lot less tedious) version of sync. See this Mozilla support article for more information on the upgrade of your sync to the new version.

• Help! iPad 2 keeps coming out of the recovery mode. I have the latest version of itunes and updated my drivers.

  Help! iPad 2 keeps coming out of the recovery mode. I have the latest version of itunes and updated my drivers.

  Please take a genius appointment at an Apple Store, or select another authorized service provider.