Cannot add my computer iTunes Match

Similar Questions

• Cannot add movies on Itunes 12.4.0.119

  I use a Mac OSX El Capitan v 10.11.4 and auto updated Itunes.

  Since the update I can't add downloaded movies more.

  I tried

  -' ' Click n slide ' and 'add to library '.

  -Shut down and restart the Mac and Itunes separately

  -Google, but not a lot of help solutions (for most older versions or Windows issues)

  -Looked on this site, but unless I use the search for bad words... nothing shows

  Someone at - he found a solution?

  Respect of

  Marcel

  I had the same problem.  I discovered that the sidebar now has a new list in the library called "Videos" below recently added, films and Genres.  That's where were all the videos I added to the library.  The ones I downloaded from iTunes store are appearing in movies where everything was.  If you don't see it, make sure that "Movies" are selected in the drop-down list at the top left of the window, just below the arrow of reading.

  All the best,

  Kevin

• Cannot add a professional Windows 7 computer in the field of a SBS 2003 R2 server

  I'm working on a Windows 2003 R2 Small Business Systems network, with 6 Windows Vista computers already attached to his field. I'm adding a laptop Windows 7 Professional in this area, but were not able to do that the Bill, even though I tried several of the fixes I found on various forums. I ran the KB926505 hotfix on the server, tried to add the computer through the process of adding sever then tried to add the computer. All efforts have failed. When you use the server set up, I told myself that a script will run to complete the process, but is happening. When I try to add the computer to the domain of the computer, I get an error that says it cannot find the domain controller, even if I ping the server IP.  The text of the file "dcdiag.txt" is-> DNS asked successfully for the resource record (SRV) service location used to locate a domain controller "pinnaclesalesinc.local":

  The query was for the SRV record for _ldap._tcp.dc._msdcs.pinnaclesalesinc.local

  The following domain controllers were identified by the query:
  (no Active Directory found domain controller)

  However, no domain controller could not be contacted.

  Common causes of this error include:

  -Host (A) or (AAAA) records that maps names to their IP addresses domain controllers are missing or contain incorrect addresses.

  -Registered in DNS domain controllers are not connected to the network or are not running.

  Any help would be greatly appreciated.

  Hello

  That you are working on Windows Server small, I would ask you to post the question on the Windows Small Business Server forum.

  http://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  Thank you.

• HP Officejet 6500 a shared printer cannot add computer network to send scan

  HP Officejet 6500 a is shared on my network by another computer. I can print to the printer, but I am not able to scan directly to my computer. I can't add another computer in the options of scan on the front panel of HP. I use Microsoft Windows XP Professional 2002. I also downloaded the installation CD on my hard drive, tried to search by IP address, but always without success. Is it possible to add another computer for instructions to scan, if I'm not connected to the HP printer?

  Hey kapua99,

  If you use the printer in shared USB mode to access over the network, then it will only support basic printing.  Shared network printers allow no detection on the share path.

  If you want to scan from multiple computers on the network, so I recommend linking the Officejet 6500 a directly to the network.  For more information about how to install the printer on an Ethernet network or wireless, click on the link below.

  http://support.HP.com/us-en/document/c02430792

  Hope this helps,

  Jason

• Add files to iTunes library

  My question is quite simple and easy, even embarrassing, but I just switch from windows to mac and have not understood yet all quarks. Can I play music from any folder using iTunes, without copying in the iTunes folder? Whenever I tried to add music to iTunes library it seems to copy the music files some of the folder in the folder iTunes music thingy. I had to change to a third party for this reason just music player, but would like to be able to use the stock apple made one. Thank you in advance!

  iTunes > Preferences > advanced > copy the files into the iTunes Media folder when adding to library > Off.

  However, I would advise that it is not the best approach in the long term. Have iTunes connected to scattered across media room makes it much harder to keep the library saved properly or move it to a new computer, the time is right. For general information, see make a library of portable split .

  If you want to avoid the creation of duplicates when you add content to the library then could be ~User/Music/iTunes/iTunes Media/automatically add to iTunes iTunes that add you to the library move it in the standard location in the media folder, and make sure that you have only one copy of each file. Readers of third party can access the same media folder.

  TT2

• Detcts iPod but ITunes "cannot correctly identify" uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify correctly.

  ITunes detects the iPod, but 'cannot correctly identify' uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify" during each step, also disconnected iPod USB port.

  Try the following (in that order).  Looks like you're using Windows (not a Mac), so I'll make this assumption...

  Shut down (power off) the computer, disconnect all the USB devices.  Plug the laptop power adapter, so that it does not work on battery power.  Do this Reset (reboot), the iPod

  Learn how to reset your iPod - Apple Support

  Start computer, run iTunes and connect the iPod to a USB direct on the laptop by itself.  If there is no difference, put the iPod in Disk Mode

  Put the iPod in disk - Apple Support Mode

  Then connect to the laptop again, always by himself.  If iTunes picks it up, he may ask you to do a restore with a message on the "recovery."  If you're OK with deletion of the iPod, do the restore.  See if the iPod is "correctly identified" after restoration.

  If the problem persists, you said you uninstalled and reinstalled iTunes, but may not have uninstalled iTunes and associated software components.  Follow the steps in this document to uninstall an iTunes installation components, in the order described all listed

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, reinstall the latest version of iTunes

  http://www.Apple.com/iTunes/

• cannot authorize my computer to sync ipad and iphone

  cannot authorize my computer to sync ipad and iphone

  Authorization

  iTunes Store-Authorize or remove approval from your Mac or PC.

  In iTunes, you use the option authorize this computer or to authorize this computer from the Store menu in iTunes menu bar. For Windows , use ALT-S to access. Or turn on Windows 7 and 8 menus of iTunes: ITunes / shooting in menus iTunes Windows 8 and 7.

• Cannot add cards: AMEX Canada blame Apple

  Hi, try to add my Amex card to pay Apple and he says repeatedly it cannot add the card now, try again later.  I called AMEX and they say that it's Apple's fault because all's fine their end.  I am connected to the Internet by Wi - Fi that works fine for everything else.

  At the beginning I was sent an authorization code, but thanks to my ISP email was taking too long to reach me so that the code didn't work.

  I have a feeling that this is why he does not accept the card now. even if this is my personal form of payment in iTunes.

  Is there a way to get the iPad Pro to go to this screen once more where I can request permission by e-mail?

  Hello

  Try the following steps:

  • Go to: settings > iCloud - at the bottom of the screen, disconnect.
  • Go to: settings > Touch ID & password - password turn off.
  • Reboot your iPad.
  • Reconnect to iCloud, turn on password and try to add your card again.

  When adding maps, follow the steps detailed here:

  Set up and use Apple pay on your iPhone or iPad - Apple Support

• Cannot open the application "iTunes" because another user is open.

  I recently bought a new computer with vista. Installed iTunes on this computer and found that there is a problem between the two profiles on the computer. I run iTunes on my profile - but whenever my wife profile is active we are getting consistent error messages indicating "cannot open the application"iTunes"as another user, he has opened." Ask the other user to quit the application and try again.

  I need to keep itunes open in my profile - and anyway, why are they bent them in two profiles in Vista... we never had this problem under XP.
  I asked Apple for advice, and they suggested to install itunes in the second profile... which I did and said to reinstall/repair...which is not the goal... Apple then told me to contact Microsoft support as he would have to do with the admin files...
  Any advice pls.
  Thank you

  Find the Itunes.exe in the Itunes folder in Program Files.  Right click on the .exe / Properties / compatibility, look down at the bottom of this page for the 'privilege level' and check the box that says "change settings for all users.  In the heartbeat window according to the box that says "run this program as an administrator".  This can only solve your problem if you can both run under the same user name.

  When you run a program as an administrator you should get a quick UAC (unless maybe you have turned off UAC?

  To see the file extensions, you may need to go into Control Panel / folder Options / discovers, there you can uncheck "hide known file type.

• Problems with PerfMon - cannot add counters

  Hello everyone.  I registered just to ask this question, which I couldn't find after a long time consult Google.  I come to you in the hope that when Google has failed, you will not!

  I use a program that some of you may be familiar, called Samurize (http://www.samurize.com/modules/news/), who does a lot of things; what I use for most allowed, in a blink of an eye, discern my CPU usage, RAM usage, information network, availability, hard disk space and my schedule on the calendar, among other things.  I know it is an old program and I know that it was designed for Windows 2000/XP, but it worked without a hitch (not including this one) on Vista and Windows 7.

  Recently, however, the ability to monitor CPU, RAM, upload and speed of download and availability has disappeared; all of them give me a flatline, statement I use no internet at all or my computer also (with the exception of availability, which reports that I have been on my computer for 49 days, 17 hours, 2 minutes and 47 seconds... he refuses to go to the top!).  Initially I thought it was a problem with the program.  It is not; It has something to do with Perfmon.  When I load perfmon.exe through the box run, it loads up with an error that says:

  "Cannot add these counters:

  \Memory\Available MB
  \Memory\% committed bytes used
  Defects of \Memory\Cache/s
  Defects of \Memory\Cache/s
  Time to \%Idle \PhysicalDisk (*)
  \PhysicalDisk (*) \Avg disk queue length
  \Network interface (*) \Bytes Total/sec.

  This isn't me accidentally say the same thing twice... it says what I typed on verbatim. [Edit:] Just remembered: other system monitors are perfectly fine.  Of course the Task Manager works well, but gadgets seem to work fine in my use of RAM and CPU, as well as my download balance sheet and download speeds. [/ Edit]

  It's pretty much the sum of my progress on the problem.  I found this page (http://support.microsoft.com/default.aspx/kb/300956), which seems like it might solve the problem... but being a lazy man boned, I hope that there is a simpler solution than that, those who are not "reformat".

  Any other relevant information:

  Windows 7 x 64 professional
  Updated with all official updates
  Recently spent Wi - Fi cable (apart from that, I can't thing of any change that I did with my computer)

  Thanks in advance!

  Hello SensaiOpti,

  I had the same problem. A level that your pointers to the perfmon counters are damaged, you must re-create these with LODCTR from an elevated command prompt:

  Click Start, type cmd click right cmd.exeand select run as administrator.
  At the prompt, type lodctr /r and press ENTER. This allows to repair the pointers (those that are stored in the registry).

  
  C:\Windows\System32>lodctr/r

  Info: Rebuilt successfully setting from system backup store performance counter

  After this action, it is possible that some providers are disabled. You can check the status with lodctr/q.

  C:\Windows\System32>lodctr/q
  Performance counter ID queries [PERFLIB]:
  Based index: 0 x 00000737 (1847)
  Last counter text ID: 0 x 00001560 (5472)
  Last help text ID: 0 x 00001561 (5473)

  [.NET CLR data] Performance counters (activated)
  DLL name: netfxperf.dll
  Open the procedure: OpenPerformanceData
  Collect the procedure: CollectPerformanceData
  Close the procedure: ClosePerformanceData
  First counter ID: 0 x 00001080 (4224)
  Last counter ID: 0x0000108C (4236)
  First help ID: 0 x 00001081 (4225)
  Last help ID: 0x0000108D (4237)
  
  etc.
  
  If she says (disabled) next to a provider, you can activate it with lodctr/e:. Use for the string between the [] at the beginning of the entry.

  Success

• Cannot add Contacts Windows Live Mail rule

  I'm trying to implement the rules of e-mail in Windows Live Mail on Windows 7 computer. I would first of all a folder to retrieve messages from all my Contacts (i.e. real people) and another to retrieve messages from organizations, I am interested in / attached to but whose email I have to see every day.

  Have implemented a rule, I cannot add Contacts, even if it seems that I should be able to. Specifically, I'm trying to set up a rule to sort mail "when the line contains people". In the box "Select individuals", the statement is to "enter one name at a time and click Add, or select the names of your Windows Live Contacts" HOWEVER, we don't know don't not how to select the names of the Contacts. When I click on the Contacts button, I just get a list of Contacts but can't copy and add names to the mailbox rules.

  I'm not typing one by one. I need help.

  Thank you.

  While in the message rule, click the Contacts button and then double-click a Contact , and click Add. That should add to the rule.
   

• Cannot add the printer network Windows 7 64 bit

  My laptop Home Premium 64 - bit of Windows 7 (client) cannot add the network printer that sits on the Windows 7 Ultimate 64 bit computer. A client XP computer easily added the network printer. When you try to add the network printer, the Windows 7 client searches for the driver on the host computer and says "unable to connect to the printer - the operation has failed with error 0x000003e3. I downloaded the driver from the manufacturer of the printer to the client computer. I also disabled the firewall on the computers... Any help would be appreciated.

  Hello

  ·         What is the number and model of the printer that you are using?

  ·         How many computers are connected to the host computer?

  ·         You are on a domain network?

  Method 1:

  You can check the items below that explain how to install a printer in Windows 7.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 2:

  a. now follow the document below to add the printer to the Windows 7 computer.

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  b. If the steps above does not help try the procedure below.

  We need to change the port and check. Let us perform the steps below to install this printer and check.

  a. Click Start, click Control Panel, and double click on devices and printers.

  b. click Add a printer.

  c. Select "add a local printer.

  d. Select "create a new port". Select "Local Port" as the port type.

  e. in the "type a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  And then click Next.

  f. Select the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.

  g. complete the installation.

  For additional help, refer to the article below.

  Printer in Windows problems

  You can also check out the link below that addresses the same issue when you face:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-0x000003e3-when-trying-to-install-network/2348b57b-7448-E011-8dfc-68b599b31bf5?msgId=d577ab02-DC48-E011-8dfc-68b599b31bf5

• error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or reboot the machine.

  Hello
  After upgrading to windows 7 Home premium 64 bit vista family premium 64-bit, I expected to be able to connect my EPSON Stylus D68 printer on my laptop and leave immediately. However, when I tried to do this installation constantly failed.  Therefore, I went to the manual add the printer option in the menu devices and printers. However I met this error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or restart the machine,"after reviewing the existing forums on the issue, I tried to restart the services option. However, the restart option has been obscured and when I just tried to start then I met an other error message: "windows could not start the spooler on the local computer service, error 1053: service has failed to demand launch or control in a timely. more when I click Properties to the spooler in the description it says failure to read the description. error code: 1813. This is all very frustrating for someone who just wants to add a printer to his laptop computer. can someone please? because I am all of these ideas.
  Thanks in advance,
  Chris.

  Try runing the file system Checker to check the alteration of system files - 1 Option to follow in the folliwng link:

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

• Cannot add new device using the USB port

  Cannot add new device through usb ports, the cable is peripheral poering, not listed is not in the menu

  Thread merged:

  try to use the scanner to photo but can not add new device via USB, cable powers the device, but the device not listed is not in the menu

  Hello

  1. do you get an error message when you add a new device?

  2. What do you mean by "the cable is peripheral poering"?

  3 are. what menu you referring?

  4. is it the problem persists with a particular device?

  5. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• get the 1726 error: cannot add the port monitor

  get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

  Could not complete the installation.

  Hi Jeff,

  The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

  Note: Do nothing until you have all of your backup data.