Add dictionary

Similar Questions

• Using the Mac OS vs dictionary add dictionary for spelling in Firefox

  I have a series of questions related to the dictionary of the BONE and up the definitions of words and spelling. With Safari, I could use command +: to activate the spell checker and loved using it. I have the spell checker works with FireFox via preferences/Advanced/Check my spelling as I type and as the better alternative. I suppose I could get used to the method using FireFox, but do not understand why cmd: can not too much work. I even went through system preferences and added as a keyboard shortcut for Firefox without success. I'm not "see anything in the drop using that - the combination of keys so what blocks?" Another important feature that does not work is that I can't click on a Word to look up the definition. This is an important feature and I use it often. Because of these, I stopped using firefox and continue to use Safari, even if Safari does not work for a primary site I visit. Safari is also usually slow and crashes constantly causing me a lot of grief. If the problems that I wrote everything worked I would not use Safari again and commit to using Firefox. I would be grateful to know how to do what I'm doing. Thank you

  Chris

  I use Firefox on a MAC OSX 10.7.5 20.0. I use an add-on called "Look Up In Dictionary" works perfectly. It evokes the native MAC dictionary as in Safari.

• How to keep English as a default value in the spell checker after adding another dictionary?

  I added a Spanish dictionary for firefox that I sometimes email Spanish-speaking. Since then, the spell checker has stuck to Spanish language by default whenever I restart the browser.
  As soon as I select English, it remains until I close the browser. But goes back to Spanish when I open a new window.
  I tried every setting I could find, and I also tried to remove and reinstall both languages via add dictionary.
  I am at a loss. Can anyone offer some advice?
  Thank you

  You can check the spellchecker.dictionary pref setting on the topic: config page and if the pref tells the user the value (in bold) and then try to reset via the context menu to the default value.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• You can create a dictionary for a layer, but how to get it back?

  So you can add dictionary to a bearing layer either:

  AIAPI AIErr(* SetEntryToLayer) (dictionary of AIDictionaryRef, AIDictKey key, layer of AILayerHandle)
  
  AIAPI AIErr(* SetLayerToEntry) (AIDictionaryRef AILayerHandle prep AILayerHandle, short paintOrder, AIDictKey key, dictionary * layer)

  But, how do you later get the ref dictionary of this layer? I can't find next layer, or dic. then it must be hidden somewhere on the right?

  Thank you

  Well, then just get the first art on the layer that you want to store information in and use it. The first art is still a group, and it cannot be deleted unless the layer is removed so its safe to use. It should behave exactly as any other combination art & dictionary.

• I DON'T WANT TO UPDATE FROM 12. HOW CAN I UPDATE MY BROWSER YOU. I'M ABOUT TO REMOVE FIREFOX AND GO TO EXPLORE

  I DON'T KNOW HOW TO MAKE IT MORE OBVIOUS. IN FIREFOX, I NOW I HAVE THE SPELLCHECKER. IN THE NEW FIREFOX I DON'T HAVE, I HAVE FAILED TO LOAD AND USE 'DICTIONARIES,"WITHOUT SPELL CHECKER THAT TAKE FORFUCKINGEVER FOR USE. I DON'T WANT THE LATEST VERSION. IF YOU DO NOT AUTOMATICALLY UPDATE MY BROWSER I'M GOING BACK TO EXPLORER.

  Yes, this is probably caused by the presence of a checker spell attribute = false as I posted above and it is probably caused by the way that this editor is implemented and only a problem that makes the current Firefox exit remove the "check spelling" in the context menu.
  
  In Firefox previous versions, you can always activate the spelling check in via the context menu, but it's is no longer possible with the deletion so that the point.
  
  You get an item "Add dictionary" is rather a bug that will be fixed in a next version.

  The current versions of Firefox hide spelling in the context of a text box menu if the web page disables the spell checking via a spellcheck = "false" attribute of this element.
  
  You can click right in the area of the text editor and use "Inspect element" to see if this text box has a spell checker attribute = "false".

  See the SUMO forum thread:

  • [971758/questions/971758] Where is the option to spell check in Firefox 24.0

  You can create a bookmark (for example on the bookmarks toolbar) and set its location to the JavaScript code.
  
  It's what we call a bookmarklet.

  • http://en.Wikipedia.org/wiki/Bookmarklet

  If you call the bookmark JavaScript code to run this then you should see an active check spelling from the context menu.

  javascript:void(document.activeElement.setAttribute('spellcheck','true'));
  

  You probably need this version of the bookmarklet:

  javascript:void(document.activeElement.contentDocument.querySelector('*[spellcheck]').setAttribute('spellcheck','true'));

• Cannot delete the bookmark shipped,

  Hello

  Idid years ago something to add dictionary.com to my Safari bookmarks bar, so that it became a part of it. Now I don't know how to remove it. It does not appear in my favorites or my favorites, or anywhere in my applications or elsewhere on my iMac. It might be a widget, but I can't find anywhere on my mac. Can anyone help? Thanks, Ine

  What happens if you click top in the bookmarks bar?

  The option 'Delete' appears?

  

• When the new Firefox will be an add-on to the German Dictionary? I need desperately, but do not want to use Windows Explorer as my browser! THX

  I just got a computer with WIndows 8 and downloaded the latest version of Firefox, only to discover the German dictionary module does not work with it! When will be repaired this add-on? I really need this dictionary!

  Hello, you can install the dictionary of https://addons.mozilla.org/firefox/language-tools/ - it should work without problem...

• I have a dictionary in hunspell in my language, I would like to add, how can I do this?

  I am digitizing my language and you want to put it in Mozilla. I did a Hunspell dictionary and need to know what to do next, so it can check spelling etc.

  Is the site of modules or sites of Open Office posted above offer a Hunspell dictionary in your language?

  In this case, you can install this dictionary and use the file persdict.dat in the Firefox profile folder to add the other dictionary.

• How do we get Firefox Add "BCE" to its standard dictionary?

  ECB and THIS are more culturally universal as BC and AD

  The spelling checker dictionaries are not COMPLETE dictionaries. Add words that you need to your personal dictionary. See:

  • http://KB.mozillazine.org/Spell_checking#Modifying_your_custom_dictionary
  • http://support.Mozilla.com/en-us/KB/using+the+spell+checker

• How can I add a dictionary Greek spellcheck to my iMac

  How can I add a dictionary Greek spellcheck to my iMac

  Try

  http://milaraki.com/blog/2010/11/Greek-spelling-at-pages-how-to/

  http://downloads.iSQUARE.gr/cgi-bin/Downloader.cgi/FileInfo/083066E1/ProofingToo ls_1.41.dmg

• Add to Dictionary

  When I right click to select a misspelled word, the option "add to Dictionary" is grayed out and therefore unusable.
  I am able to "ignore" or "ignore all", but does not add it to the dictionary so that I can continue to use the new Word.
  I use a lot of biblical words and abbreviations that aren't in the dictionary of the computer:
  How to activate this feature in order to add unknown words in my dictionary?

  Having the same problem with a greyed to add to THE DICTIONARY button that I struggled for hours with other responses to suggest (repairs, etc.) but then found a solution.

  Open Word 2010 Go file > Options. Proofing > click Personal dictionaries. Then click New and type a custom name on the name bar (which shows .dic cleared before you type custom. Then click on the Add button

  ciustom.dic appears in the list of dictionaries. NOT make the custom dictionary the dictionary by default as it suggests, rather go to the drop-down list of languages your favorite (U.K. English in my case), and then select click on OK button on the default all the boxes to quit.

  This will create the custom dictionary. I think the problem is that MS is default U.S. English > but when another form of English by default, it fails sometimes to that dictionary personalized to save your own special words

  I hope that this stops someone else having the same pain!

• Add words to the dictionary app system

  Hello

  Sorry for the English

  Thanks in advance. How to add words to the dicionary of the app system. We access resources system like dictionary since the application of webworks or through native extensions

  I don't think it's possible with the current API.

• Remove context menu items get Suggestions and add them to the dictionary

  How can I delete the 'get the Suggestions' and the items of the context menu "Add to Dictionary" for an EditField?

  I request this API targets 4.2 but running this application on 4.7 API (TOUR) presents these two new context menu items. Is it possible to disable the elements of pop-up to appear? I tried setting the indicator of EditField.NO_LEARNING but that does not work.

  Thank you.

  Found the solution. You must set the field. NON_SPELLCHECKABLE Pavilion on the style.

• Add to the list of words to the handwriting dictionary?

  Is it possible to add a list of words to the compressed dictionary input (TIP) writing Panel handwriting recognition?

  For example, is there a way to put the words in the dictionary that MS office uses (custom.dic) in the dictionary of ART?
  I ask because I am a student and the MOUTHPIECE does not recognize a large number of specialized terms that I use and I don't want to have to manually add them both. I think the recognition is trying to "recognise" the words he finds in his dictionary.
  I know that I can add one word at a time by writing the word, typing on it and choosing "Add [Word] the dictionary of Scripture" in the menu dropdown.
  Does anyone know where this dictionary? How can I add a list of words from the dictionary?

  Thank you
  ARI

  Hello Ari D,.

  You may need to download and install the tool dictionary from the link below and check if that helps you accomplish what you want.

  http://www.Microsoft.com/windowsxp/downloads/PowerToys/TabletPC.mspx

  You may need to install the software in compatibility mode this tool is intended for Windows XP.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Documaker Studio, how to import a file that would update/add fields to my dictionary to extract (SYMBOL. XDD)?

  I want to be able to import a file that contains all my tags/fields, new and existing.  11.3 I can import a file as follows:

  ;; POL. AGENT. AD1; 79; 34; 0; 0 ; ; move_it; 45, POL. AGENT. AD1;

  ;; POL. AGENT. AD1 #002; 79; 34; 0; 0 ; ; move_it; 45, POL. AGENT. AD1;

  ;; POL. AGENT. AD2; 79; 34; 0; 0 ; ; move_it; 45, POL. AGENT. AD2;

  ;; POL. AGENT. AD2 #002; 79; 34; 0; 0 ; ; move_it; 45, POL. AGENT. AD2;

  ;; POL. AGENT. AD3; 79; 34; 0; 0 ; ; move_it; 45, POL. AGENT. AD3;

  ;; POL. AGENT. AD3 #002; 79; 34; 0; 0 ; ; move_it; 45, POL. AGENT. AD3;

  ;; POL. AGENT. AD4; 79; 34; 0; 0 ; ; move_it; 45, POL. AGENT. AD4;

  ;; POL. AGENT. AD4 #002; 79; 34; 0; 0 ; ; move_it; 45, POL. AGENT. AD4;

  ;; POL. CONTINUED. MSG; 79; 22; 0; 0 ; ; move_it;@GETRECSUSED,BOPDEC0105,DECPAGE/45,pol. CONTINUED. MSG;

  If the field/tag existed it would replace it and if it did not exist it would add.  Is it possible to do in paragraph 12.2?  If yes how can I do this?

  Thank you!

  Import workspace files does not apply in this scenario of particular importance.

  To import specific files, such as files of DDT in your extracted dictionary, you would first open (or create if it doesn't exist) your dictionary to extract data.

  This should display the open dialog box file that will allow you to check your XDD out of the library.

  Then, starting in the extract of data dictionary, select file, import.

  You should see the open file dialogue box

  

  Click on extract data

  then click on the Browse button

  which will display this dialog box

  

  Thank you