Z5 liquid not poweron

Similar Questions

• Hello I can't in my acer liquid e3 show me this message "the acer liquid aplication" s errete "

  Dear community of morning

  I get my acer August liquid and use it without any problems. But since this morning, I can't in my phone as usually, because it shows me a message on screem: 'acer' liquid application stopped. How can I do to fix this and decode my fone?

  E3 isn't a button of the camera and is the volume down to select options on the first menu.

  to exit the fastboot, you do a long press on the power button / stop.

  the steps are so, with the power off:

  1. Press HIGH volume + button / stop
  2. the first vibration, leave the power button / stop and hold the Volume UP key
  3. move the Volume selection up and choose Recovery by pressing volume DOWN
  4. android robot died, press power button / stop
  5. Press volume DOWN to move to "wipe data / factory reset".
  6. Press Volume UP to select "wipe data / factory reset".
  7. wait for the finished case
  8. select Reboot

  Please do not post misleading job (the link you posted is for the first unit of liquid not E3)

• The directory structure and using the correct syntax when using models of liquids and 'include '.

  Hello

  I have the following on my directory structure question when I want to use models of liquids with 'include '.

  If I place i.g this code on a model liquid 'layout - test.tpl ".

  {% include 'head' %}

  < section >

  {% block content %} {% endblock %}

  < / section >

  {% include %} 'footer'

  The models will appear without understands it. (On my desk works okay, because that the code compiles through "interprets" and will be shown in plain HTML.)

  Directories look like this (within the section of the administration console developer):

  Page layouts

  -Custom

  -includes

  ... header.liquid

  ... footer.liquid

  -models

  ... layout - test.tpl

  Obviously there is something wrong with my code to work in British Colombia.

  The main question is, what is the correct syntax to make it work?

  Thank you

  Kind regards

  Carla

  You can use no mixing to compile BC locally. BC is SAAS - Software as a solution, and you cannot compile it and its data locally. Simple as that really.

  You can use several file extensions to include in British Colombia. A common set of community is Inc. includes, .tpl for models, for example.

  I think the essential lack of your property is your liquid not application of the BC, your use of the syntax is incorrect and you try to develop locally which you will not be able to do.

• Liquid for the title of Webapp html elements

  I need to change the < title > elements of webapp. And it can be changed with liquid or anything else. It seems strange that liquid not change it or substitute the title Webapps of the element.

  Why do I need to do.

  I have a recruitment site that I manage. They have a job listing webapp that they use the name of the company on behalf of title webapps so they can sort and search the webapp elements as there may be in the same position, but for different companies may. Problem, they do not want the company name. A few second ago works around the url but the title I can change only by using jquery and I don't like this option. Because you can search for fields of element of webapp or webapp link point to the customer crm.

  Unless I'm missing something that I could be there no way to do it.

  It seems strange that we cannot use fluid to change this in the html code.

  Am I missing something, is this a bug Liquid or is this a feature that should be added?

  Did you put a head element and the title in the great product page layout where a liquid field tag custom is the value?

• iPhone 4S locked lock/power button

  I have an iPhone 4s, my upgrade time is next month. My lock/power (at the top of the phone) button is stuck. When I use the home button to wake up my phone, sometimes the phone itself, locks without pressing me anything, or display "slide to power off". I've had this problem for about a month now, and in the beginning I couldn't cope with him, he wanted a huge problem. ID would like to know if there is any kind of temporary solution for this, don't want to disassemble the phone to replace anything, given that I will be upgraded next month anyway. Thanks in advance!

  dry with a non fluffy cloth button and If you want to dance with the Devil by the light of the full moon you have to clean it with 90% alcohol isopropyl with turns so the button is on the bottom and you wipe with lint said, allowing the liquid not to go into the phone by holding down the button positioned is the closest thing to the Earth's gravity (e.g. isopropyl alcohol doesn't work no leaks in the internal hood of the phones because it can go away from the phone)

  If that does not fix it you phone is ' prolly falling apart, and time for a new (I have the same phone btw).

  If the phone pop up, I was never here or suggest all this.

• addChild to Clip Parent?

  Hi all
  
  How is - a load a SWF into a parent movie clip object?
  
  For example, I have a clip for my navigation buttons, "scene 1 > mcButton" which loads a SWF in a framework, "movieScreen_mc." If movieScreen_mc is mcButton, it loads very well. But if movieScreen_mc is in place on the stage, above mcButton, addChild throws an error: "access of undefined property movieScreen_mc.
  
  My site is liquid. By dropping these sovereign wealth funds in the frame, they are sure to reposition, and scale with the browser. Otherwise, I have to do each SWF independently liquid - not very effective.
  
  Here is my code:
  
  var myLoader:Loader = new Loader();
  myLoader.load (new URLRequest (" http://www.mysite.com/subpage.swf"));
  movieScreen_mc.addChild (myLoader);
  
  All the tips are greatly appreciated.
  
  Dave

  If movieScreen_mc is in the main timeline and your code is not, you can use:

  MovieClip (root).movieScreen_mc.addChild (myLoader);

• Laptop does not start after spilled liquid

  I spilled liquid everywhere in my laptop yesterday. And now it does not work!
  The thing is, I could activate it yesterday after I poured the liquid, it seemed ok.

  So I just turned off and left to dry.
  But it is not today.

  What should I do?

  Hello

  This is a really bad story and I put t see any chance of getting the laptop works without any replacement hardware.

  I think we are ve got the worst case. This means you have a short circuit that could damage the whole motherboard. :(

  I think you should certainly contact the notebook computer technician for a control.

  But it sounds really bad, Buddy :(

  However, good luck

• Satellite L500 - 19 X does not after all liquid spill

  Hello

  Newbie here, pleased to meet you all.
  I got a Toshiba L500 19 X, who has a problem, the keyboard does not work, at all.

  This happened after a spillage, or so I thought.
  I fixed a few laptops which have been submitted to liquids, but this one is different.
  In this case the laptop works brilliantly, is not a problem except for the keyboard does not.

  I have attached an external usb k/b and it works perfectly. I stripped the laptop down to the mobo and there is no sign of a reversal of liquid.
  I use a large magnifying glass to inspect the Board, usually find something blow over, but does not in this case.

  Nevertheless I cleaned the mobo and everything seems fine. But the k/b will not work.
  I am come to the conclusion that the problem COULD be an update of the bios of electronics, or corrupt.

  I have d/load the latest version of the Bios, gaining 2.10, but when I go on install it tells me that the current bios is equal to or newer than the one I have d/load and flash will not take place.

  I come hat in hand, to help if possible, and to see if anyone has had the same problem.
  Maybe point me in the right direction.

  The bad news is that there is a problem with the motherboard.

  Any help or advice would be appreciated.
  Thank you in advance.

  > In this case the laptop doesn't work brilliantly, is not a problem except for the keyboard does not.
  > I have attached an external usb k/b and it works perfectly

  So you have a great chance looks like the motherboard is ok and the keyboard controller also works.
  Why is this a BIOS problem? The laptop worked perfectly in the past
  Therefore, in my opinion you should contact point of service allowed in your country and should replace the keyboard.
  In my opinion the problem of keyboard internal

• Liquid fell on my Satellite M30x - now it does not start

  Hey there,

  yesterday, some orange juice fell on the side of my toshiba M30X laptop.
  Immediately, he came out. I manipulated the laptop carefully, she held so that some of the juice could go out again, then I tried to dry near the heating.

  Now: there's a light running, when I try to put it, but after 5 seconds it turns off again.
  So is there anything I can do? Is is useful to try to get their hands on the hard drive?

  I know it was my mistake with the juice, but I would be very thankfal for each tip that you can give me!

  Thank you very much
  Kurt

  Something like that happened to my girlfriend some time ago.
  She spilled a coke and the closed laptop.
  It was not possible to turn on the laptop. I have noticed the same behavior.
  The LED was on but the laptop didn't start up.

  Finally, laptop technician found one of the memory modules was defective because of the liquid in the Bank of memory.

  After the replacement of the laptop starts fine.

  Maybe my story might be useful for you!

• How to remove/disable liquid acer home if the country is not supported for update app

  Hello

  Recently ordered (imported) the Acer Liquid zest 4G. Beach is very good, but I want to disable the Control Panel Home Acer Liquid. I read the solution is to update the application, but the app is not not in my country how can I get around this problem

  Thanks for your time

  Sorry, just found out all I had to do was an update of the system and it include acer liquid House update. Sorry for inconvenience cause. Thank once again for the help and your time

• Acer Liquid E700, automatic Roaming problem, even when roaming on the parameters is not enabled

  Anyone else having an E700 liquid Acer having problems with one of the 3 slots sim making an unwanted automatic ROAMING? For example sometimes in my sim 1 or sim 2 on the home screen, right where the signals of sim card show, theres a 'R' which is displayed automatically for example above my sim network 1, even if in my SETTINGS - MANAGEMENT of SIM - ROAMING-DATA ROAMING (not verified)? The sign 'R' above the ' Networl bars (for the sim 1 or sim 2) sometimes disappear and reappear.»  Any reason, why this happens?

  In addition, in the SETTINGS - SIM MANAGEMENT - DATA-(doit elle être définie "OFF" ou devrais je choisir d'un de mes 2) CONNECTION

  SIM cards?

  Phones my firmware is updated btw. Any help is appreciated guys =)

  1. make the pitchers (e.g. NOVA, ACTION), battery drain more than standard system Launcher / by default?

  No, if the Launcher is well optimized, never used.

  2. use a batery save app? they actually work? I have battery Xantrex GSam, don't know if its really useful, his run in my background btw.

  Never used one.

  3. I have an LCD IPS display, black or dark wallpapers will minimize battery drainiage?

  Yes, but not so much, because I do not think that you will stay on the homepage of 20 to 30 minutes.

  4 Will play a movie 1080 p in a pile of emptying smartphone 720 p faster compare to play just a 720 p movie in a smartphone to display p 729?

  Yes, because you need more CPU/GPU downscaling the original resolution power

• Right icon name becomes/strange/weird not Acer Liquid X 1

  Hi Acer and users,

  I have this problem with my Acer Liquid X 1.

  Sometimes the icon phone naming appearance becomes strange.

  For example Google + becomes G...

  Sometimes, some extend the appellation of the correct icon.

  It is very annoying

  One undergoes this kind of question or one to solve this problem?

  Here are the screenshots of what I'm talking about.

  It is a screenshot when sometimes the designation of icon is good.

  The second screenshot shows a messed up icon naming.
  

  Thanks for the answer iron fly.

  I think you're right that the problem is with the Acer theme/launcher. I tested with the help of a third party, and the problem disappeared completely.

  Acer would kindly fix this issue because I don't really like using third party ui/themes/Launcher. It's just not natural for me.

• S1 not liquid supoert Flash Player

  I have ACER Liquid S1, it doesn't support flash player? Please immediately issued updates. Thank you

  Acer has nothing to do with it. Android does not support flash more.

• Aurora R1 - R4 A - 51 Corsair h80i Corsware mind-Meld liquid cooling adapters-&gt; 0 &lt;-not available h55 h60 h75 h100i h105 also

  M M Mark II:

  Coolers of H80i/100i Sata-Fan area-51 & Aurora R1 - R4

  Quantity available: 0 (sold out since 3.16.15)

  

  Picture shows 7 pins of the Aurora - I also 5pin of area-51. An adapter like this is what Dell had to you when the pump of your clogged R4 for unresolved reasons not allowed & overheated your high dollar Ivy-E.

  I built the above adapter & I have enough power to do more than 9 of them for the aftrmrkt Corsair-type coolers in your area 51 & Aurora R1 - R4. Sold through eBay & here on the forum:

  

  -: 55/60/75/80i/100i/105? I have technology majik in mind-Meld w/CmndCntr-

  For h80i/100i - above - I used the correct 7pin to reconnect your bunch of overhead lighting, & you go your connector sata & pumps fan connect my sata-mutual Fan connectors. It is the Mark II version, where the rider to the ground happens in the sata connector. Crimping base & welding using correct pins & UL1009 BLK 22awg wire. 1 "wire >< 2.5"="" end-to-end.="" h55/60/75/105="" will="" use="" a="" similar="" setup:="" mark="" iii,="" see next post="">

  Do you need one? Meh. But if you do, CmndCntr will notice current pump execution status, you will not get the fan @ start up error, & your CorsairLink fact his majik via usb for temp and fan speed monitoring. If you don't have a link, then try it. The idea of the wire back as if it was b4 the swap. And you can pop your fans of the pump head, reconnect on sysfan, leave the CC to do its thing. Uninstall the link. It I said...

  Cost is $ 15, so you will not break try it. Ready to post on now. If you want to be on the shopping list:

  1. Carillon in this thread & say: to the bottom of my stranger with the mind-Meld (my R1, R4, A - 51 etc.)
  2. Follow it up w/a friend request
  3. I'll message back for your Paypal ID & we take care of the rest

  Of course you can look @ my pictures & make your own mind-Meld retro-fit-kit: details are brutally specified here, where you can buy a foot hold how/where your source material & build your:

  • The ALX files: Operation Mind-Meld: Command Center Retrofit for Aurora R4 overheating problem SOLVED! Corsair H55 H60 H75 H80i Area 51 h100i h105 how to project Corsair cpu cooler liquid beam = Corsware
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19585441

  

  left: simple wire used for the rider "son" of superior quality (chemical bonding) land of new gold-plated pin sata

  Middle: components used to adapt #2 - right: finished product

  below: more pinned on. Yours is ready to send out now.

  

  I had planned to welding - assembling 4 adapters over this weekend, but as John Lennon advised us:

  life is what happens to you when you're busy making other plans

  The foregoing were not welded or assembled yet: a good thing, too. If sell Mark III adapters in the post below, I can convert them more "Tesla Swiss Army knives" (below, add 2.50) If you wish.

  When your M - M adapter arrives, open your door case & plug it. Time is about to sing the words this moving Lennon - McCartney favorite - song right on then & there to your dear Alien:

  Close your eyes... don't be afraid... the monster of swap is gone... it is on the run... & your Daddy's here

  beautiful, beautiful, beautiful, beautiful boy...

  https://www.YouTube.com/watch?v=j0IMASimhRo

  The beautiful Lennon / Darling Boy - one of my favorite too - (as in Mr. Holland's Opus)

  Adapters Alienwair comes to be run to the top of the flag pole: Let's see who salutes...

  My R1 Aurora down with mind-Meld.

  I'll take a Mark III Tesla (Swiss Army Knife) version.

  Not sure why my cooler Asetek original works still after 4 years, but my Aurora-R1 must live forever.

  Who knows what brings the future. I don't know that I want my cooler Asetek replacement as new (not used or rebuilt). This card allows to use Contingency Plan-B (using a Corsair/Asetek proven cooler).

• Conditional liquid do not print when the conditions are met.

  I build a simple menu in British Colombia and for the purpose of this project, I'm going to be exposing this menu without using Module of menu in British Colombia. I use the following code:

  {% If globals.user.isLoggedIn contains 'true' %}}

  < id = "my-account-link" li > < a href = ' / my account "> < i class ="fa fa-diamond"> < / i > < span class ="-animate "> my account </span > < /a > < /li >

  < id li = "settings-link" > < a href = "/ my account-#settings" > < class i 'fa fa-sliders' = > < / i > < span class = "-animate" > my settings </span > < /a > < /li > ""

  < id = 'link-support' li > < a href = "/ my account/help" > < i class = "fa-fa-question-circle" > < / i > < span class = "-animate" > support </span > < /a > < /li >

  < id li = "logout link" > < a href = "/ LogOutProcess.aspx" > < class i 'fa-fa-sign-out' = > < / i > < span class = "-animate ' > Log Out < / span > < /a > < /li >" "

  {% other %}

  < id li = "connection-link" > < a href = "/ login" > < i class = "fa fa-sign-in" > < / i > < span class = "-animate" > Login / / Sign Up </span > < /a > < /li >

  {% endif %}

  I have used before with other snippets of code and this liquid condition print very well. For some reason, when I test the newspaper, the State still shows the wrong code even when I look through the JSON printed in the console object and the object user loggedin contains the value Boolean 'true '. Sort of at a loss as to why it is not printing when the user connects. Really want to use liquid on it and do not have to revert to the version JS of the hiding items.

  Thanks in advance to all! Best wishes!

  Well, I feel stupid, I was following the copy and the tutorials BC and pasted. Realized that I had to use operators such as "is" appropriate and «!» = ». I fixed it now