Add memory to my 2011 iMac 21.5 "Quad Core i5 2.7GHz

Similar Questions

• When installing memory in Middle 2011 iMac 27 inches with 2-4 GB

  When installing in mid 2011 iMac 27 inch 2-4 GB & 2-8 GB memory is it important that goes into upper slot?

  No, but the slots should have matched in pairs. Pairs should be put in side NOT up and down.

• Would you buy the 27 "iMac 3.2 quad core i5 OR the 21.5" iMac 3.3 quad core i7?

  I'm trying to decide between two iMacs, costs are roughly equal:

  27 "iMac3.2 quad core i5

  16 GB 1867 MHz DDR3 SDRAM

  AMD Radeon R9 M380 with 2 GB of video memory

  OR

  21.5 "iMac i7 QuadCore 3.3

  16 GB 1867 MHz LPDDR3

  Intel Pro Iris 6200 graphics card

  Reflections on SDRAM DDR3 vs LPDDR3 and Iris Intel VS AMD Radeon pro graphics?

  I need some changes to photo/video, but nothing on a large scale.  I'm going to play asteroids every time than in quite awhile but not really a player. 5K or 4K will be fine...

  Which would you buy?

  Thanks in advance!

  I go for the iMac 27 "just because of the ram is expandable and you are able to cram 64 GB of ram in the beast...

  and the ram is the same thing... in both machines

  and imac 27' graphics card is much better than iris pro intel 6200

  You can get it with just 8 GB of ram and upgrade it yourself its cheaper to pay to apple...

• How to add memory to end 2007 iMac?

  I have done it before, but can't find instructions this time to do.  I got the chips in the mail, but no instructions.

  Can anyone help with this?

  Larry Jay

  Click here for more information.

  (139350)

• updated to 16 MB on 2011 iMac 27.5 inch quad core will cause a slow start to the top?

  Have 27.5 inch iMac OSX 10.11.3 computer. The memory of 4 MB.  Recently updated to 16 MB.  Now have the very slow start up.  15 minutes.

  Should take 15 minutes to initialize 16 MB on a quad core computer?

  ewcbhc wrote:

  Have 27.5 inch iMac OSX 10.11.3 computer. The memory of 4 MB.  Recently updated to 16 MB.  Now have the very slow start up.  15 minutes.

  Should take 15 minutes to initialize 16 MB on a quad core computer?

  If you put expensive RAM and/or incorrect RAM then Yes. iMacs are very sensitive to the RAM and you must use quality RAM, more experienced on these forums users use OWC (www.macsales.com) or critical (direct purchase). RAM should also be installed in pairs. If you purchased anything else, then after a report of EtreCheck of your system and we can look for obvious problems.

• Add memory to slimline s5212y

  Add memory to slimline s5212y with windows 7 Home Premium 64-bit system does not recognize not 4 GB?  Don't start with anything any more than 4 GB?

  Please see the following Internet link that has the characteristics and limits of the motherboard installed in your system:

  http://support.HP.com/us-en/document/c01386897

  

• El Capitan 10.11.3 is compatible with my operating system? a MacBook Pro (15 inch, late 2011), 2.4 GHz Intel Core i7, 4 GB DDR3 memory at 1333 MHz

  El Capitan 10.11.3 is compatible with my operating system? a MacBook Pro (15 inch, late 2011), 2.4 GHz Intel Core i7, 4 GB DDR3 memory at 1333 MHz

  Yes.

  El Capitan system requirements

  https://support.Apple.com/kb/SP728?locale=en_US

  Check the compatibility of the application

  http://roaringapps.com/apps

  How to upgrade?

  http://www.Apple.com/OSX/how-to-upgrade/

  Note:

  Computer backup before the upgrade.

  El Capitan works better with 8 GB of RAM installed.

• Add memory to my desktop PC

  I have a Compac Presario desktop PC 6331rsh and need to add memory. I know that there are two locations of memory, which is currently listed with a 256 MB memory card.  Can I add another card with 512 MB of memory, or should it be an another 256? What are my options?  The Compac site has both the 512 and 256 available, but I don't know if one would require to replace the current 256 or simply add?  Can someone help me? Thank you.

  Here is your card.

  Memory installed 256 MB Maximum authorized as 1 GB (2 x 512 MB) sustained speed PC2700 MB/s Type 184 pin, DDR1-333 SDRAM DIMM slots two

  You can add a stick of 512 MB and 256MB on.

  I recommend the ram below.

  Link for 1x512mo stick: http://www.newegg.com/Product/Product.aspx?Item=N82E16820236106

  Link to 2x512MB sticks: http://www.newegg.com/Product/Product.aspx?Item=N82E16820141215

• 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. Is this easier to do than to to replace a HDD with a SSD? I hope I can do it myself.

  My 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. The SSD originally came with the computer and not a subsequent update. I understand that a SSD replacing a HARD drive is quite complex, but would be more simple replacement of a dead with a new SSD SSD? I hope I could make myself.

  Even as the replacement of a HARD drive. However, go to OWC buy the connector of the special drive that has the necessary temperature control that is not part of the SSD, because it is for the stock of HARD drive.

• How can I add memory to my iPad 2?

  How can I add memory to my iPad 2?

  You do not have. iDevices do not have expandable memory.

  You can get a device like the WiDrive in Kingston, which is a portable drive that you connect your iPad to (via a wifi network that is created by the reader) and you can stream media and transfer files in this way.

• Pavilion 6510f: add memory to HP 6510f

  We wamt to add memory increases from 4 to 8 GB.  Is it compatible with my HP 6510f part

  Hello

  Your first consideration should be Support HP or HP sales during the consideration of upgrades or replacement of memory. If you want to consider other manufacturers of the best way to avoid memory problems is to contact one of the leading manufacturers of memory. I would recommend that you try the tools of these manufacturers: Corsair, Kingston and Crucial. Once you have determined the DIMMs that you need, then contact commercial or technical support to check that you have selected the correct DIMMS. If you buy directly from manufacturers, then they will stand behind their products.

  DIMMs 2 GB HP, part number 497157-D88, have been certified to work on your PC.

• HP Pavilion Slimline p6243w-b and you want to add memory

  I have HP Pavilion Slimline p6243w-b, running on a 64 bit OS and the vehicle currently has the original 3 G B memory and I want to add more memory.  It runs a little slow.  I am able to add more 4 GB system?  I was confused by the hp page and my model is on the information page to see how you can add memory.

  Thank you!

  http://www.memorystock.com/memory/HewlettPackardPavilionSlimlinep6243wb.html

  or

  http://homeinstallation.CNET.com/desktops/HP-Pavilion-p6243w-b/1707-3118_7-33781193.html

  or

  http://www.crucial.com/store/listparts.aspx?model=Pavilion%20p6243w&cat=RAM

• HP1006: Add memory printer HP1006

  My HP1006LaserJet printer freezes sometimes for a few minutes, when I send a print job that has included graphics on the page.  Finally, he will go ahead and print, but often I have to simply delete the print job and start over.  I think that the solution would be to add memory to the printer, but I don't know how, or if it is still possible.  I love this small monochrome printer and have even stockpiled two B & W replacement cartridges, so I'd hang on to it for a few years.

  Can I add a memory for my HP1006 printer?  Who sells upgrades memory?

  Also, when I change my current 32-bit Vista OS computer to my new 10 64-bit Windows operating system, the LaserJet HP1006 printer will be able to work with the new computer and the operating system?

  Thank you very much.

  Hi @Knightside,

  Thank you for reaching out to the forums! I understand that you are having problems with the printer freeze for a few minutes when you try to print documents with graphics. I'd love to help you.

  The memory could not be added to this model.

  If you print a PDF file, try to print as an image to see if it helps: Print PDF as an image.

  I would like to disable all startup programs to see if this will speed things up: How to use MSCONFIG.

  If you're still having problems, put the driver to print directly to the printer.

  Go to start, Control Panel, printers, right click on the printer, left, click Properties, click the Advanced tab, select print directly to the printer, click apply and then click OK.

  Test the printer again.

  I have provided a link for the printer drivers that you need when you install the Windows 10: Basic drivers.

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!

• HP 15-g040au (J6L81PA): add memory to HP 15-g040au (J6L81PA)

  Hi, I want to add memory to my laptop - Task Manager says he uses one of the two slots, but the HP product page says there is a location that is accessible to the user. I can't find any documentation or manual on how to access the RAM so I can't even look at the present time.

  Yes, there is one or two locations?

  How do I access the RAM

  What type of RAM can I add/replace? (Speed, voltage, buffered, ECC etc.? I don't really understand these)

  Thank you!

  Hello

  Yes, you can shop, but the new design now can take an entire day to make you add/replace RAM, not 3 minutes, as the old design. To be safe is to make sure, please use the following site to scan your machine. It will tell you exactly what you need and where to buy, or you can also use the information to buy elsewhere:

  http://www.crucial.com/USA/en/systemscanner

  Kind regards.

• Cannot hot add memory spent 32GB

  VM 2012 data center, hardware version 8, cpu and memory hot add activated, 8 CPUs (kernel), 32 GB of RAM.

  I can add processors, but cannot add memory in desktop client or web client. If there is a limit I'm missing it. Ideas?

  

  Just a follow-up for everyone who was watching this.

  I opened a case with VMWare and they were not helpful at all. They told me to delete and recreate the virtual machine.

  I ended up having a maintenance window and was able to turn off the virtual machine and add memory. After starting up the option is back.