updated to 16 MB on 2011 iMac 27.5 inch quad core will cause a slow start to the top?

Similar Questions

• Satellite U940 Windows 10 update, very slow start to the top

  Hello

  It looks after upgrade to win10, the SSD is not used to quickly boot up the laptop.
  How can this problem be solved?

  In tools, defragment disc, it shows all of my partitions as SSD drive so I can't defragment.
  Why are they displayed as SSD? I think that the basic motivation is a 500 gb HHD and only a 32 GB SSD is included.

  Also in the management of the computer disk SSD drive shows only 11.22 GB of capacity and is not used (all 11.22 GB free)

  Help, please. I want to get the quick start of the win8.1 and at the same time be able to defragment my HARD drive.

  Posted by some_user
  

  Hello

  It looks after upgrade to win10, the SSD is not used to quickly boot up the laptop.
  How can this problem be solved?

  In tools, defragment disc, it shows all of my partitions as SSD drive so I can't defragment.
  Why are they displayed as SSD? I think that the basic motivation is a 500 gb HHD and only a 32 GB SSD is included.

  Also in the management of the computer disk SSD drive shows only 11.22 GB of capacity and is not used (all 11.22 GB free)

  Help, please. I want to get the quick start of the win8.1 and at the same time be able to defragment my HARD drive.

  Hello

  Same problem here with a weak start after the upgrade to Windows 10 (with a Satellite U940-11 t).
  If anyone has the solution, it could be great :-)

  EDIT: I just saw this post: https://forum.toshiba.eu/showthread...-to-Windows-10
  I will try this solution.

• Install Snow Leopard on iMac 2.8 GHz Quad Core i5

  I just bought a refurbished 21.5 in iMac 2.8 GHz Quad Core Intel Core i5 on the Apple Store to replace an aging 21.5 in iMac 3.06 GHz Intel Core i3. The new iMac has 10 El Capitan 10.11.6 OS and the old iMac OS Snow Leopard 10.6.8.

  I have old versions of Quark Xpress, Photoshop, Illustrator and Filemaker Pro on the old iMac running SL and I want to continue to use these. I am now retired and can no longer pay to upgrade.

  I partitioned the HD on the new iMac and had hope install SL and migrate all my old files from the old computer. I tried to recover from a Time Machine backup since the iMac old and installation of the system from a bootable USB stick SL. None of them has allowed me to move forward.

  Has anyone else tried this and succeeded? Will I have to completely erase the HD in the new computer, partition the drive, install SL on a partition and, on the other?

  I've seen similar issues but no response to my problem. Real help would be appreciated.

  Your mac is not designed to work in 10.6 and the operating system will prevent installation of 10.6 using the API. While this is possible through virtualization, but you will be using a 3rd party solution to do something your mac was not intended to do and any instability could be traced back to this.

  Use the version of Mac OS X included with your Mac, or a more recent compatible version - Apple Support

• Firewall Windows disable the Internet Explorer loads Up after slow start after the installation of Windows updates

  Hello, (this the mystery of on and Off and back on Windows Firewall with slow loading of programs like Internet Explorer as this all is pass it on firewall, disable the firewall, the firewall, it occurs only during starts, after he fine / but very annoying on reboots whom he accuses of my computer down) / listed below is the cause of it , and when she first started, you have a solution?

  I recently installed the last 16 (High Profile) updates to security, for most security updates and updates from net framework as well as the removal of malware for windows XP tool.

  After installing these updates, now my Windows Firewall turns off during 'Boot Up' on all restarts. If I try to load Internet Explorer, it will also not load up to minutes serveral / while this happens... That's fine, then finally my firewall itself loads Up quickly turns to Internet Explorer and back on during this time around the same time.

  After these updates these things are happening on my computer now, it's as if there is a process running, but nothing run any virus, Trojan or worm etc just these updates caused this problem. I don't know if it updates is corrupt or not, but have tried different things as system file checker /scan etc with no luck.

  (1) computer boots to the top and seems to Load Up Fine ' until the ' or 'Look at this' but isn't, something is running in the background or process "wing unstalled" is obviously "unhooked", etc..

  2) try to load Internet Explorer last minutes and is very slow to load up, even if I 'don't load Internet Explorer' must still a long while that as in the firewall turn off for awhile some several «minutes» (way too long), before "auto turn on automatically return.

  (3) turns firewall Windows itself on "finally" as Internet Explorer finally loads upwards as well the two Internet Explorer is able to load 'definitely' and the firewall is on "finally" as many minutes later as listed above, at the same time.

  This could be the cause? Only, it has begun to 'After' I ran windows update and installed the 'most recently high security updates for windows XP' there were 16 listed mainly security updates and updates of net framework as well as the software removal tool windows malware.

  That's all that is changed on my system, I tried many things, nothing seems to fix this problem with my computer. I know for a fact that these updates are the cause, but am not sure that you caused it? Or how do to solve this problem, any sugguestions would be appreciated.

  Please answer questions following diagnosis by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on the computer?

  3. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. you are using IE6, IE7 or IE8?

  5. have you ALREADY had the opportunity to do a Repair Installation of Windows XP for some reason any?

  PS: PLEASE DO NOT START ANYTHING IN ADDITION TO NEW THREADS ABOUT IT!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. Is this easier to do than to to replace a HDD with a SSD? I hope I can do it myself.

  My 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. The SSD originally came with the computer and not a subsequent update. I understand that a SSD replacing a HARD drive is quite complex, but would be more simple replacement of a dead with a new SSD SSD? I hope I could make myself.

  Even as the replacement of a HARD drive. However, go to OWC buy the connector of the special drive that has the necessary temperature control that is not part of the SSD, because it is for the stock of HARD drive.

• Photoshop Elements 10 will work on an iMac with an Intel Dual Core processor?

  Photoshop Elements 10 will work on an iMac with an Intel Dual Core processor?

  Yes. See the data sheet for more details.

  Mac OS

  • Multicore Intel® processor
  • Mac OS X v10.5.8 to v10.7
  • 1 GB of RAM (2 GB for HD video functions)
  • 4 GB of free space (additional space required during installation)
  • display resolution 1024 x 768
  • DVD-ROM drive
  • QuickTime 7 software required for multimedia features
  • Internet connection required for Internet-based services *.

• Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)

  Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)?  I contemplate moving to Sierra, but not if it comes into conflict with Logic Pro.  Can someone advise?

  Thank you!

  Matt

  It was reported a number of not being able to save or to new projects with the title of the Sierra.

  I would conclude some time if I were you, especially if everything is working well at the moment.

• This update (Security Update 2016-001 El Capitan and security update 2016-005 Yosemite) broke my iMac. I had to restore from Time Machine 2 times!

  This update (Security Update 2016-001 El Capitan and security update 2016-005 Yosemite) broke my iMac. I had to restore from Time Machine 2 times!

  Please correct this update security update 2016-001 El Capitan and security update 2016-005 Yosemite.

  My screen freezes during my login on my i - Mac!

  I tried 2 times with the same result. Restored my i - Mac 2 times!

  My iMac after this update of market with gray screen too, very bad update in safe mode.

• mid-2011 iMac pinging

  My iMac mid-2011 has recently started to make a 'click '. Click on... Click on... Click on... "noise from the top right of the screen. Generally, this occurs when the computer is warm to the touch during the execution of a sustained load and ends shortly after the closure of the intensive application of resources. The nose is frequently accompanied by beach balls and/or crashes.

  The last accident happened when I was an hour or two in a game of Civ5. Click ended after that I saved and you leave the game, but the next morning, the iMac doesn't have to awaken from its sleep, showing a black screen with a white spinning indicator. Recovery required a stop forced through the power button and restart.

  Anyone know which components are at the top right of an iMac which can be faulty or needs to be replaced?

  If yours is an iMac 21.5 inch mid-2011, the inside bits can be found in this

  iFixit repair Guide (view room logic, shows all the internal parts; see chapter 33).

  

  {in this point of view, the optical drive and cooling fan assemblies are both deleted}

  https://www.iFixit.com/Guide/iMac+Intel+21.5-inch+EMC+2428+logic+board+ReplaceMe nt/5959

  {There is no room at the top to the right behind the screen which will have a total

  for the noise. However the top center, is where the hard drive. And

  a hard drive rotation can make a rattling noise. until they die. And when

  they go out, usually the symptoms and the results are much as you say.

  •Consultez the main section of this guide to see the steps to enter in the

  the place where the hard drive... Note: IF the 2nd HARD drive has been installed, it can

  have been placed at the top right; {an option, a small 2.5 "could be mounted there.}

  (You may choose to request the assistance of an expert, see the steps in the main guide for access.)

  If yours is an iMac 27 inch mid-2011, a detailed picture of guide or takeapart for

  a model identified as such by MacTracker.ca database - is not in the iFixit guide.

  Seems to be very similar to 21.5-inch, except small details; they share some IDs.

  The graphics processor and the processors are generally different between 21.5/27 inches.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider

  If the suggestion is to consider an appointment on Apple store genius to see

  If they can determine a more exact cause of failure; It may be too old for them

  to really fix it. They may offer to send it for repair in a certified shop.

  - Or you might see an Apple authorized Service provider; where could they

  make a diagnosis one & give you an estimate of repair, based on their findings.

  The hard drive is a likely candidate for replacement with a new one; the FSAA

  can be sure to install a correct, which has a corresponding temperature sensor

  If the iMac won't work fans constantly; not quite right, the other parts may be a

  cause of a boring problem indicated where the cooling fans default to high

  and all the time. Apple part number hard drive replacement has sensor.

  {A backup of your computer, if they exist, can be migrated to your}

  iMac, once repaired; backups on external storage drives & those once

  Usefulness of the machine could help to restore a Mac. If the failed HARD drive

  is a vortex for data loss, an expensive undertaking if the data recovery service is hired.}

  In any case...

  Good luck & happy computing!

• Add memory to my 2011 iMac 21.5 "Quad Core i5 2.7GHz

  Hello

  Can I add 8 GB memory cards in the 4 slots in my iMac 21.5 "Quad Core i5 2.7GHz? At the moment I have 2 x 2 and 2 x 4 GB cards and my mac is evil and taking a age to perform simple tasks. I thought he could have my HD was complete but there is two-thirds still available so it must be a problem with memory - unless someone has other suggestions of what it could be? I was planning on replacing the four locations maps 8 GB but want to verify they are compatible before shelling out.

  Thank you

  If it is a Mid-2011 model:

  Maximum memory	(Real) 32 GB 16 GB (Apple)
  Memory locations	4-204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM

  If it is a late-2011 model:

  Maximum memory	(Real) 16 GB 8 GB (Apple)
  Memory locations	4-204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM

  Actual spending refers to the maximum tested by OWC.

• 2011 21 inch iMac won't start after the SSD upgrade

  Recently, I upgraded my hard drive for an SSD via a computer repair business in my neighborhood, I also upgraded the ram, but I don't think it's in the case. On a two weeks after the upgrade, my computer don't turn on more. I took it to the genius bar and they told me that the DSS had "failed." So of course, I took my computer to the computer repair company and they ran some tests, discovered that the hard disk does not (according to them, he only read this way because the apple store has run the test for a normal hard drive and not an SSD). I'm not super computer savvy, so I took their word for it.

  Now, however, it has been nearly a month and my computer refuses to activate once again. Previously, it has worked well, the fans were running at full blast - what I knew would be a problem (although the repairman told me that they 'fixed' this issue too). So the first time, I downloaded a program called SSD fan control and set the fans to run in silent mode. This second time around, I realized that it was probably a bad idea because it could lead to overheating, so I put manually the fan speed so that we could hear still run, but just not as loud.

  I tried the reset SMC, but no result. Right now, I unplugged everything including disconnect it from the power strip.

  Any other experience of power with a new SSD failure? Is there anything else I could try at home before contacting the computer again repair business? I would not be able to reach at least until tomorrow, and I'm really curious to know how they managed to get my computer back on the first time.

  Also, I've been out of my warranty period for about a year, so that's why I thought that I was not risking too much by exchanging the original for one SSD drive.

  First of all, the original in Middle 2011 iMac hard drive had a temperature sensor integrated in the drive.  More new or replacement of those who do not.

  Other World Computing sells an Apple certified temperature sensor that plugs into the SATA cable.

  https://eShop.MacSales.com/item/OWC/DIDIMACHDD11/

  I just put a 2 GB Western Digital Black in mine, with the sensor.

  I suggest all first, reinstall the OEM disc and see if it boots.

  Put the SSD in an external enclosure and see if it runs...

• When installing memory in Middle 2011 iMac 27 inches with 2-4 GB

  When installing in mid 2011 iMac 27 inch 2-4 GB & 2-8 GB memory is it important that goes into upper slot?

  No, but the slots should have matched in pairs. Pairs should be put in side NOT up and down.

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

• Hi all, I have an iMac (21.5 inch, mid 2011) with 4 memory slots, 2 has 2 GB each, is it OK to put a 4 GB in each of the empty slots or should I buy 4 new 4 GB and replace all, Sebastian Cheers

  Hi all, I have an iMac (21.5 inch, mid 2011) with 4 memory slots, 2 have a 2 GB each, is it OK to put a 4 GB in each of the empty slots or should I buy 4 new 4 GB and replace all, Sebastian Cheers

  You can put 2 x 4 GB DIMMS in the empty slots, this will give you a total of 12 GB. iMacs are very sensitive to the RAM, it is best to buy RAM from reliable sources like Crucial (direct purchase) or OWC OWC RAM

• Mid 2011 iMac 27 pink vertical lines and does not start - any ideas?

  My iMac was working normally when he is suddenly flashed to a Uni blue screen. I rebooted and it came with the normal loading as burt screen with vertical lines of roses. He gets a third of the way through the sequence start then just goes to a gray screen and hangs. I tried Safe thing same boot. Apple Diagnostics ran short and long tests, and comes without any problem.

  Occasionalyl iMac starts and works for awhile then crashes on a gray screen is unresponsive.

  Any thoughts on what would be the problem?

  6 months out of the AppleCare too!

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

  Question (?) Mark, record of flashing or a gray screen at startup

  It's related, but not identical questions. Their causes are described in based on Intel Mac-Startup sequence and error codes, symbols. Solutions will be found in:

  A globe or a flashing question mark appears when you start your Mac

  Mac OS X - grey appears during startup

  In most cases problems can be caused by one or more of these:

  a. problem with the computer's PRAM - see reset the PRAM and NVRAM on your Mac.

  b. boot, directory of the drive has been corrupted - repair with disk utility.

  c. critical system files are corrupted or deleted - reinstall OS X.

  d. the hard drive is physically non-functional - replace the hard drive.

  Please note that the information I have provided is what Apple recommends, if other users will suggest different solutions found here, then be sure to what they recommend has no impact on your ability to get the Apple continuous service guarantee, if any.

  Please do not start remove disks or change cables unless you know what you're doing and have exhausted other alternatives non-invasive described here. If you perform all knit yourself which is not approved by Apple, then you will void any warranty you can have and lose any other Apple support.

  Fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  The main difference if you use Lion or Mountain Lion, you must first boot from the boot Recovery HD simply HD recovery to perform the foregoing.

  Reinstall Snow Leopard without erasing the drive

  1 fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  2 reinstall Snow Leopard

  If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  Relocation of Lion/Mountain Lion without erasing the drive

  HD recovery start: , restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select the Recovery HD and click on the arrow pointing down.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu.

  Reinstall/Mountain Lion Lion: Select reinstall/Mountain Lion Lion and click on the button continue.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.