Add/Remove a keyframe in gray on the scale of movement:
I try to scale of movement and I can't create keyframes.
I am only allowed to create keyframes in the opacity menu.
I am using first Pro Version 4
I'm doing this effect on a JPG image. I also tried the effect on a video clip and nothing. I can't create keyframes, it is grayed out.
Any ideas as to why?
Here's a look at the chronometers in the effects Control Panel:
Good luck
Hunt
Tags: Premiere
Similar Questions
-
Have XP Pro with the Panel open, click on add/remove progs - nothing happens. All the other c/Panel open Fredrick help OK
Hey Fredrick,
· You get the error message?
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Run the following command:
Start, run, Appwiz.cpl
Check if you can run the Add / Remove programs.
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
Method 3: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 4: Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
-
> I'm trying to uninstall and reinstall my HP printer.
> In my Add/Remove Programs list, there are several HP programs listed and I started to remove them (has done this in the past with no problems).
> The last of them, I clicked on delete does not give me the options to 'Change/Remove '. The program is called "HP PSC700 Series" and seems to be the main
part of the installed software - it is a 243Mbs size.
What I tried:
> I have reinstalled the printer from the CD program in the hope that it can replace every thing and then I could uninstall correctly - that didn't work.
> Look in C:\Program Files - there was no Hewlett Packard folder
> Look in the start menu > all programs - there was a list of Hewlett Packard who has expanded the. When extended out, he said "empty folder".
> Posted the problem on the HP Forum twice in two months, got no response.
> Learned how to remove the registry keys under "Software" in HKEY Local Machine and HKEY Current User. Also under HKEY USERS > default > Software.
None of this has worked.
> Gave a link to a family member to Support MS - "How to manually remove programs from the Add/Remove tool" I followed these instructions and
the program remains still present in Add/Remove programs.
Does anyone know how I can remove this program that has no program folder, no registry keys, but still works? I can still print from this computer, but cannot access the HP Director (a function to scan, print, clean & align print head, etc.), which is what started this process of trying to uninstall/reinstall the program.
Any help would be greatly appreciated...
Photo TakerYN
My system is;
Dell Dimension 4550
Windows XP Pro w/SP-3 (version 2002)
Of photo TakerYN...
This message can be considered "solved!" I was finally able to remove the program with the HP disk. I tried to reinstall (overwrite) the program, but I received a message that the installer has detected that the program is already installed. I wanted to try it manually, so I 'opened' the disc, you click on "setup" and received the same message. At this point, I was ready to try anything and noticed the "Launcher" icon and thought, what the heck, can't hurt to try at this stage, so I clicked it. I wasn't expecting the screen, I had, who said that it would be to uninstall the program. I thought it was too good to be true and easy way (after all), but after that it's over, I checked my Add/Remove programs and my 'problem' program was gone.
Thought I would post this so anyone who might encounter the same problem can try this.
Photo TakerYN
-
Add/Remove programs doesn't not lists the full programs
I need to remove programs from my system, but "Add/Remove Programs" is only show the programs starting with "A". How do I remove old programs?
Hello
· Were there any changes made on the computer before the show?
You can follow the steps from the link: Add/Remove Programs displays installed the tool incorrectly: http://support.microsoft.com/kb/266668
-
I've recently updated the basic software on my 9800. The version is now 6.0.0.668, bundle 2949. When I go into the configuration of email, since the update I have received no email, I'm presented with a list of e-mail addresses that I used in the past on the device and asks me to check the passwords for the accounts. However, when I put a password for one of the accounts I always get the same answer "I'm sorry, impossible to continue your session. Please log in again "." It's always the answer be an account POP3, IMAP or webmail.
I checked the help file and suggests it would add and remove options from the menu, but all that is available are App Switch, help and Close. I have also reviewed a number of backups, but have not any possibility to restore the e-mail settings.
Can anyone suggest a short action plan to restore to the factory settings?
Call your carrier and request access to its site of BIS online self-service. Everything you want to do with your email accounts can be done from there.
I hope that helps you.
-
Updates, mainly critical updates, which are downloaded and installed manually appear actually Windows XP-> Control Panel-> Add / Remove programs. I use NO automatic update of Windows. I run a batch file to install more than 20 + critical updates, but none of them are showing up for me in the list "Add / Remove Programs". Yes, I have the check box 'Show updates' checked. System configuration: Winndows 7 RTM, Gigabyte GA-EP45-UD3L motherboard, Intel Pentium Dual - Core E6300 Wolfdale 2.8 GHz, 4 GB of memory PC-1066 DDR2 Patriot Viper, 500 GB Western Digital hard drive, GeForce 8800GT Videocard
Yes. They should display Control Panel Add or remove.
TaurArian [MVP] 2005-2010 - Update Services
-
Remove programs that don't let you do it from the Add/Remove programs in XP screen
I am running Windows XP. A week or two ago while logging into my account, the program Sonic Record now kept wanting to connect to update. However, when Sonic Update Manager was trying to "collect data" it gave an error that the network does not work (I'm not on a network). Anyway, I got feed with this and tried to remove the program under the screen XP Add/Remove programs. The program is there, but when you click it, it will not bring up the screen so you can remove it. And I went to programs on the C:\ drive and deleted the folder of the program did a reboot. No luck. The Sonic program always tries to use the Manager to update. Also, I tried to reload the program using the disc that came with the computer when I bought it. I get a message saying essentially that I need to remove the current program first. However, the program Sonic record has already been deleted.
What I do next and how remove a program in Add/Remove Program screen, after clicking on the program, it won't bring the option to remove? Any help would be appreciated. Thank you very much.
Try to remove with this tool. -
How to remove a program that is not in the Add/Remove list of
I deleted an add/remove program of & thought later that I had removed that badly. . I restored it from the trash, but it is not in the Add/Remove list.
Through 'search' I found but don't know where it is.in my files was my original action of removing correct & now I want to remove again but cannot find a way to get it uninstalled. Hope you can help thank you GormaurYou can use Revo Uninstaller to remove an installed program are not not in the control panel.
Revo Uninstaller - follow the link and download the free version:
http://www.revouninstaller.com/revo_uninstaller_free_download.html
I deleted an add/remove program of & thought later that I had removed that badly. . I restored it from the Recycle Bin
When you uninstall a program via Add/Remove Programs, it will not in the trash.
-
This is a toolbar of IObit.com, my system said it couldn't, t find the installation source. and my manage apps feature would not allow me access to the function 'delete '.
Hi RandyThompsonXU,
· What happens when you try to uninstall the tool bar by using the Add/Remove Programs tool?
See the link below to download and run the uninstaller from IObit program to remove the toolbar from the computer.
Remove a tenacious toolbar with new IObit Uninstaller
http://blog.iobit.com/remove-stubborn-toolbar-with-new-IObit-uninstaller_1009.html
For further assistance, please post your request in IObit forums using the link below.
-
Add/Remove program on laptop HP515 reported the size of the Agere Systems HDA Modem as being program
3,582.00 MB (3.5 GB) you want to assume this is a mistake, because the driver was last updated was 2006 and Agere was acquired by LSI. However - this computer he'd have removed the ThinkPoint (via AVG2011 anti-virus) virus with
no trace, if the elements of the manual removal in the registry, so AVG you all this?So I tried to remove the program, which needs software modem dialup? and disable it in Device Manager
After having removed via Add/Remove programs when you restart it himself reinstalled w / no prompts
After uninstalling the Manager of devices, same thing except that now it says the size of the program is 6 437,00 Mo!Will be not deleted or disabled after reboot. Next step is to open up the laptop and see if the modem can itself be without shearing of the Board of Directors, if that will not trigger the re - install software
Can find no other reference to this problem anywhere, hope it's just a will and
the GB are not counted against the count of HD space.On another laptop running Vista home the same modem is shown no program size, just empty.
There are a TON of malware which is legit software. No way to list them here. All we can do is get anti-virus software AND software to search for malware (in some cases, you may two or three different types of software.) I myself use AVAST, MalwareBytes and Spybot and AdAware. --
Gina Whipp
2010 Microsoft MVP (access)Please post all responses on the forum where everyone can enjoy.
-
How to uninstall Windows XP Service Pack 2 when I can't find it in Add/Remove programs?
I'm going to erase my computer before you donate. My computer is really old and the operating drive that I said it's for Windows XP with SP 1 Professional.
I tried to reinstall with this CD, but he told me that the service current pack on the computer is newer than the one on the CD, so he couldn't reinstall. I figured out that the SP3 has been installed and uninstalled SP3 from Add/Remove programs box.Then, the computer is down to SP2. When I went to do the same with SP2, I can't find it in the add/remove menu. I see Windows Updates and a whole bunch of them, but none that said service pack 2.I went through a lot of pages talking using the term of order etc etc, but nothing works.Please let me know if there is another way I should try to re - install the original CD so that I can clear all of my computer.Thank you!Darik Boot And Nuke
Darik Boot and Nuke ("DBAN") is a self-contained boot disk that securely wipes the hard disks of most computers. DBAN will automatically and completely delete the contents of a disk to hard that it can detect, which in fact a utility suitable for bulk or emergency data destruction.
http://search.Yahoo.com/search?p=DBAN&EI=UTF-8&FR=HP-PVDT>
UTC/GMT is 11:12 Sunday, November 20, 2011
-
Lost uninstall in Add/Remove programs
Hi, I seem to have lost the procedure to uninstall a program in Add/Remove programs. It only shows the function of the Organization in the upper part. I select a program, and there is nothing to click on uninstall. Vista Home Basic is on my Pc which has been preloaded. It worked ok before. Also, I can't go back to a previous restore point. I downloaded Revo for the moment. But I would like to have the original back function. Any ideas appreciated.
Ted.
Thanks, I ran the analysis of the system and this seems to have solved the problem. Can now add/remove programs and have found the system restore.
Concerning
Ted.
-
Windows Installer inaccessible folder + add/remove programs hangs
Hello
Today, I had some problems with Mozilla Firefox. After a while it hung and I had to hard-reboot of my computer.
After research and virus problems, it seemed that the %WINDIR%\Installer folder was not accessible. My system hung up when I tried to open the folder (and when Windows read this content to view details).
I then opened the Add/Remove Programs page, which hung in the same way.
I have no problems installing programs (I first tried to update to Firefox, which caused no problem).System requirements: Windows Vista Home Premium, SP1.
Currently, my computer works fine, but probably it crashes again at the opening of this file.
Does anyone know a solution?
Thank you!
S
Update: my problem is solved.
I checked my drive on the flaws and repaired a few (of the signonhelper Windows Live) .msi file in the installation folder.
All the problems have disappeared. -
Why not delete commonly used Mount Options - no Expand more or add/remove tracks?
Where is the ability to expand/collapse and add/remove video and audio tracks in the first Pro CC mounting Panel?
Why they were withdrawn in the convenient context menu?
Hover your mouse over the track header and scroll the mouse wheel.
-
New to Flash CS4... How to remove a keyframe?
I'm new to Flash and have two questions that I can't find an answer to in one of my books or online tuts.
#1 I created a motion tween for my chart. I have 10 keyframes in total, but went in I had 1 too. I would delete it but when I go to the drop down menu to delete... I can only delete all the. Or... what happens if I want to delete a keyframe in the middle of my trajectory?
#2. I have a keyframe in the same path and I would like to move elsewhere as scheduled. When try Alt + click and drag... it moves the entire timeline. I wonder if there is a way to do it. I might miss, not here, what could be more advanced?
Your help is appreciated.
Hi Kate,.
To move an image, Ctrl/Cmd - click and drag to a new location one. It won't drag the entire range.
To delete all keyframes of property on a single image, select it (Ctrl/Cmd-click), right-click and choose Remove image > all (or one of the other options if you just want to delete an image key type. Remove executives also works for an individual frame like this also, but it removes the frame, not only delete the keyframe.
New movement spans allow you flexibility animate independent properties, which explains why there is more to just delete the image of the additional options.
You can also remove individual keyframes of properties in the query editor.
Hope that helps.
Maybe you are looking for
-
Black flashing/scrapie browser on Web sites.
If the thing is, the whole page is flashing black, as you can see in the screenshot. And when it's dark, if I hit f11 or I change the tab and go right, correct, but I don't see things like the home in facebook for example button. Or the facebook chat
-
Since the update to version 4 of Firefox, I'm not able to watch/loading video on Hulu or at & T U-Verse live. Both worked before the v 4 update. I've updated the plugins flash and Director. The videos play in Chrome and IE without any problem.
-
Hello The code for a batch file copy folder (my folder name is = my client of the user on the example of .to network username user name of May is user1 so my D ind drive file is user1) from one disk to another copy. I tested this code, but has not re
-
Need help with the location of the file that is customized to the title of the ADR
ADR 2.0.9.224.01.07Apex 4.2.6.00.03We have a requirement to locate our custom, for example, files, JavaScript, CSS, Images, etc. outside the apex_images, it is-to-say/i directory. So, specifically, we don't want to locate in a subdirectory of i. When
-
In Oracle SQL, select cannot use the column in the statement and order of
Hello Is there a work around for this. Thanks in advancePablo.