Add storage via FC 16 G FC switch 2.51 VMmark encounter a problem failed

Similar Questions

• Can I add storage at my Air of MacBook 13 inch, purchased mid-2011, which has 121 GB storage capacity, on which 12,28 GB are currently free.

  Can I add storage to my 13-inch MacBook Air, purchased mid-2011?  Its storage capacity is 121 GB, on which 12,28 GB are currently free.

  You can replace the internal flash SSD with greater capacity, a drive. It would be easier to add something external.

• Cannot add applications via printer or ePrintCenter

  Hi I have a Photosmart 6510 but are unable to add applications via the printer or the ePrintCenter interfaces, because no Apps are listed?

  Hello

  I had the same problem! What I forgot to do, was to enter the correct language and location (uk) in the settings to the printer. I then deleted the eprint centre reset printer settings added web printing again in the center of eprint. (enter the code that you print and choose a different email address for the printer) then I could only see all the applications available! Brilliant.

  This will fix your problem, no problem let me know and I'll give you a step by step guide.

  Mike.

• LUN ESXi 5.1/store data not visible in trying to 'add storage '.

  I just added two 300 GB hard drives in my RAID, reconstructed and checked that the size has increased in OpenManage, but I am unable to actually increase the size of the data store residing on the RAID from the vSphere client. See photos attached. In photo 1, you can see the new size in OpenManage. In photo 2, you can see the data store I want to enlarge. Refresh or rescan everything has no effect. When I click Add storage, you can see in Picture 3 that there is no warehouses to choose. It's the same thing in November when I added a drive, but it was under warranty and a remote Dell technician in and did some fancy table/file system partitions while SSHed in to solve the problem. What I have to do the same thing or there at - it another way? If the former, how?

  I solved this through the command line. I followed the instructions at more a local data store from the command-line in vSphere, ESXi 4.x and 5.x.

  If you were stuck in the GUI as I was and you will find the daunting command line, just pay attention to what each step says you and document what you do as you do, so you don't get lost. If you learn what you are doing as you do, it just makes sense.

• You see only not iscsi LUN, attaching to add storage

  I'm newish to the whole thing vmware/iscsi, but got it to work once.

  Environment:

  HB BL460c (32 GB of ram, 2 x local 146 GB SAS HD, nc382m HBA)

  vSphere ESXi 5.1

  MSA2012i (12 x 1 TB HD)

  I created a vswitch (VMkernel Port) to port1 of the nc382m (vmnic2) and then added the virtual iscsi adapter to connect to them.  A re-scan one I could add the LUNs available on the MSA as storage on the esxi host.  Everything was fine.

  But, I created a second logical unit on the MSA number (it is shared to all hosts) and I re-scanned on the esxi, but when I try to add storage no LUNS are listed.  I followed the same procedure as the initial installation, which worked fine and now no joy.  I searched the forums for ideas but not so far seems applicable, since I was able to do this for a single logical unit number but can now add a second logical unit number.

  Kind regards

  Marshall.

  The issue has proved to be a bug/flaw in the MSA.  The MSA I use has only a single controller/processor storage and apparently regardless of whether it has one or two SPs it assigns new vDisks of alternately between both SPS 'potential '.  So in my case the first vDisk was entrusted to SP - A and worked beautifully.  The second vDisk was assigned to the same SP - B hard did not exist.  Therefore, it was not visible for ESXi hosts.  Change of 'ownership' of the second vDisk lun was visible on the ESXi host.

  Here is a link to HP Customer Support Advisory about this behavior:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3687128&prodTypeId=12169&ObjectID=c01470001

• Impossible to add storage as data store

  Hello

  I started with 4 esxi servers 5 to test the object with the method of assessment and added the common datastore on all 4 servers for virtual machines that worked very well. but the tests I formatted 2 esxi servers and installed ESXi 4 top, now when I am adding common storage in these 2 ESXi 4 Server I get the error attached, I have found the solution so that it can delete the partition with fdisk command to this logical unit number, but this LUN is common for all 4 servers and virtual machines running on it for 2 ESXi 5 host , so please, someone has the solution to this problem

  Another problem is that showing time in hostd.log file is different because I have configured in Setup esxi why its different time showing.

  Thank you Sam

  Please mark question answers

  Frank

  Am 03.09.2012 um 18:49 wrote sagar_arora [email protected]<>[email protected]>:

  Http://communities.vmware.com/index.jspaVMware communities >

  Impossible to add storage as data store

  sagar_arorahttp://communities.vmware.com/people/sagar_aroraresponse > in VMware ESXi 5 - see the discussion complete onhttp://communities.vmware.com/message/2108663#2108663

• What does add storage Wizard?

  Dear team,

  Once I click on Wizard to add storage, I m n learn number of LUNS that follows is the blink of an eye the same.

  

  is over the top of the screen measn that VMFS datastore is not created on LUNS?

  Concerning

  Mr. VMware.

  To add to the iw123, the LUN response that appear as being available in the Wizard "Add storage" does not contain a VMFS data store or they are used as a ROW.

  André

• Error al add storage (datastore) en virtualcenter

  Buenos dias

  Tenemos una infrastructure of various host esx 3.5 gestionados por un virtualcenter 2.5 desde hace varios Años. Desde hace unos Días me da UN error cuando intento add storage para crear a datastore para lo tengo are presented as nuevo has los una cabina of 300 Gb. Para ello selecciono a LUNs esx host, voy known config pestana, a storage y al boton Add storage. Cuando en el lugar del Assistant in pincho para anadirlo, unos segundos espera obtengo el siguiente message after:

  The query failed because the remote server has taken too long to respond

  Y is no puedo hacer mas, don't con lo than no puedo crear el nuevo datastore y lo Necesito UN ago that los current estan casi llenos. He reniciado el virtualcenter don't sin any resultado y ahora mismo no se por donde depower.

  ¿Alguna idea? MUCHAS gracias por adelantado.

  Kind regards

  David

  Hola Sorcerer1210:

  Dick as screams datastore en el a host y luego escanear in el resto are suficiente. If son datastore diferent there you da problemas in algun don't host agent deberias reiniciar el y no ser asi el host completo.

  A greeting.

• LUN ghosts under "add storage.

  Hello

  OK, so this is going to prove that I'm still learning.

  vSphere 4 (ESX4), using an EMC SAN.  My guy in storage created me a LUN TB 5.37 and 4.03 TB LUN.  I connected to the first LUN and started trying to create a VMFS data store, and of course he did not how I thought it should.  And I went to the documentation and the book Mastering by Scott Lowe has learned the rule of 2 TB - 512 K.  I love to learn things.

  So, I got my guy from storage will seduce the large LUNS and dismantle them in small LUNs, all less 2 TB.

  The problem I see is that the original two large LUNS are still appear in the add storage wizard window.  I tried refreshing and reparsing.  The large LUNS appear again - I guess that the real problem is that the smaller MON new are not all appear - miss me a unit logic of each of the large lun number.  Here's what I mean - the 5.37 TB lun has been removed from the SAN and three LUNS 1.79 TB have been created, but I do not see the first of three people.  Even with TB 4.03 LUN that was initially created and then deleted and divided into third - I don't see the first ONE of this lot either.

  I guess I have to refresh something and probably learn new things from command line.  I love to learn new things.  Has anyone seen elsewhere this behavior, or has any suggestions?  I have already confirmed with my guy in storage that old LUNS have been washed properly and correctly created new ones.

  Thank you

  -Steve

  It is actually a problem with the service console itself, I guess you are using the classic ESX.  I ran in there with physical Linux servers as well.  You can have these changed now the new Lun ID LUN or a restart if you want to keep them.  New LUN IDs would avoid a reboot.

  In a perfect world, a new analysis would be all you have to do, but with some berries SAN (my HDS is notorious for this), I had no chance without a reboot.

  -KjB

  VMware vExpert

  Don't forget to leave some points for messages useful/correct.

• How can I add an ID related when I get this message (there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later.) ?

  How can I add an ID related when I get this message (there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later.) ?

  Hello

  an answer your other thread

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/why-do-i-keep-getting-your-Windows-Live-ID-cant-be/268ff99c-E459-E011-8dfc-68b599b31bf5?page=1&TM=1301396733390#footer

• Use an external hard drive to add storage to an imac

  For some reason, I can't find an answer to this anywhere.  I know that you can add more storage to a computer by changing the internal hard drive, but I'm not good with electronics and will attempt rather than.  Is it possible to attach an external hard drive to my iMac (21.5-inch, late 2009, OSX 10.11.3) and have it work as if the computer itself has more storage?  I'm not interested to move the files to the external drive to clear up space already a resident, I want the storage that is already 'the annex'.

  Thank you!

  This capability on Macs for a long time. With your model I ecommend a power player, one who possesses its own independent power supply. They are more expensive than the models that do not have a power supply, but are much more relaible.

  I use these on all our Macs:

  http://eShop.MacSales.com/shop/FireWire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

  Your Mac without any USB 3, I would get the version of reader that has FireWire 800 ports for reliability and better speeds of backup. That drive can be moved to a new Mac when you decide the 2009 model is ready for the retirement home.

  I used the readers of 'brand' that the supermarkets put office on sale every weekend, but find them too centered on Windows to always play well with Macs. This is why I spend a little more money for the OWC product. After all, how are your images and data value?

• Add new N3048 to current stack of switch

  Hello

  I have a new N3048 switch to add to our current stack of 2 N3048 to provide more capacity. Before lighting for the first time, that I would like to know if I need to run through the initial configuration or can I just connect the new battery switch and power, it will then get the config of the switch?

  The firmware must also update on the battery, can I do this first or when all 3 switches are in the stack?

  Thank you very much.

  Since the existing battery and the new, we can have different firmware revisions, generally the best route is updating the firmware on the existing stack, and then on the new switch to add before attaching it to the battery. You should not need to do any initial configuration before attaching. As always recommended is to use a ring topology when stacking to avoid "split brain" IP address and duplicate problems are common with chain failures.

  B

• BlackBerry smartphones can not add music via the Desktop Manager

  Hello

  I am trying to add my music collection to my Blackberry via the Media Sync on the Desktop Manager. However, after several attempts and control of aid for the Desktop Manager I don't seem to be able to do! There is no icon on the Desktop Manager for Media Sync so I don't know what I'm supposed to do!

  I have a Curve 8900.

  Help, please!

  

  Read this link please, after that you are able to sync music

  http://supportforums.BlackBerry.com/Rim/Board/message?board.id=Hello&thread.id=69

• Slow iSCSI-IP connection between ESXi and DataCore Virtual storage via 10 Gbit cards

  Hi all

  at the moment, I have test the following configuration:

  Site #1: DELL PowerEdge R730xd with 10 Gbit NIC and DataCore-V DataCore Virtual Storage under ESXi (vSphere 6.0.0 build Standard, 3380124)

  Site #2: Apple MacPro6, 1 with 10 Gbit NIC and ESXi (6.0.0 vSphere Standard, build of 3380124)

  DataCore # 1 server has a disk via iSCSI to ESXi on #2. The connection is running. Up here, so good, but for example when I start a Storage vMotion on #2 of local SSD on the iSCSI disk, speed is exactly 1 Gbps. interesting is that the speed increase when I start a second Storage vMotion and still when I start a third Storage vMotion etc. This behavior is clearly visible in my attached screenshot.

  To me that sounds like to it no matter what iSCSI-IP connection is limited to 1 Gbps.

  
  

  All the components used are certified VMware.
  

  Any ideas that I can check for this problem?

  Thank you very much

  Migo

  The reason for this behavior is that the MacPro6, 1 has two interfaces of iSCSI software that points to a DataCore frontend. It is not allowed. After you have disabled the second interface of software iSCSI, growth up to full 10 Gbps speed.

• PowerEdge 1850: Need to add storage: ISCSI or SATA controller or? : Host does not support configuring passthrough

  I have a (non - VT capable) PowerEdge 1850 which took an ESXi 4.0 U1 (Dell Version) installation like a champ.  I know that I probably won't be able to have 64-bit clients.

  In this box of ESXi (laboratory

  Server) I have:

  • 2 x 73 GB SCSI U320 drives in RAID 0 array.

  • 6 GB OF RAM ECC

  • 2 x 1 GB NIC

  • 2 x PCI - X slots (PCI - X slot 133 MHz and PCI - X connector 100 / 66 MHz)

  I want to add more space "VM/Guest" and not spending too much money.

  What is my best solution?

  1. Find a compatible ESATA 3Gbps controller card (I have a nice 500 GB SATA Drive laying around)? ...

  2. Or should I get out an old box and throw a Gigabit NETWORK card and a SATA inside player and try my hand at Openfiler? I have yet to try it.

  3. ... Or... something else?

  Could someone help me hand choose either a PCI controller card - X ESATA/SATA (is - it possible or am I limited by my attached picture?) or a NETWORK card for my spare box (if it is not an old)?  I understand "_ _passthrough configuration"allows my virtual machine to hardware on the host computer directly, but I'm not clear how this effects my plans you want.

  I read:

  • http://www.VM-help.com/esx40i/esx40_whitebox_HCL.php#storage

  • http://ultimatewhitebox.com/iocontroller

  • http://www.VMware.com/resources/compatibility/search.php

  .. .but I am suspicious of money sinking into the material lest my PowerEdge does not support the Configuration PassThrough (does it matter?)  I still have to load a single guest.

  Thanks a lot for your time in advance!

  Get started with what you have. Do not pass anything. Set up the old PC you have as a NFS storage device. Use openfiler or? That will allow you to do some investigation/tests you want to do. Keep your eyes open for a local RAID controller or on an old server with lots of fast scsi storage you can add such as NFS or?