Add the check box for each line in the classic report

Similar Questions

• How to include check boxes for alternating line fill?

  I tried allowing alternating filling line before and after adding a column with checkboxes, but it just does not work - the entire column "will not participate" in the alternation of filler as all other columns don't. How can I make it work?

  Hi VarHyid,

  Worked for me.

  I inserted a new table 'ordinary' in an existing document to format a cell as a checkbox column, then clicked on the button in the Inspector to Format table, clicked on the alternative line color box, click on the color wheel and used the RGB sliders to set a color for the alternate rows (pairs).

  

  Note that I started with a "plain" table and that it did not apply fills all cells except through alternative line color. Any color fill applied to the cells will substitute the color defined by collour alternative line.

  Kind regards

  Barry

• PDFMaker, Options, create PDF/A-1 a in Word. Where can I change the setting so I did not check the box for each file, I create?

  PDFMaker, Options, create PDF/A-1 a in Word. Where can I change the setting so I did not check the box for each file, I create?

  Win OS: Windows 7

  Acrobat 9 Pro

  Hello

  You can do this to change the registry settings.

  Go to run type Regedit to open it.

  First make a backup of the registry.

  Here is how do.

  Go to HKEY_CURRENT_USER > software > Adobe > Acrobat > PDFMaker 9.0 > > Word > settings

  You need to change the DWORD values & chain listed below.

  Chain: JobOptions

  Value: PDFA1b 2005 RGB

  DWORD: PDFComplianceIndex

  Value: 1

  DWORD: PDFComplianceLevel

  Value: 1

  Close the registry editor

  Thank you

  Abhishek

• LabVIEW allows to read an Excel file to a control and add a checkbox for each line

  As say the topic, I need to use labview to read an excel file and show it in a control, such as mclb; I should add a checkbox for each line then allow me to choose the line I want. What should I do? Thank you very much.

  guiming wrote:

  I can read an Excel file to a spreadsheet, but I have no idea how to do to add a checkbox for each line.

  Sometimes, all you need to do is Google. https://decibel.NI.com/content/docs/doc-25000

  http://www.labviewing.com/check-box-in-multicolumn-ListBox/

• Unlock the position of the 'legends box' for each image in the slideshow

  Hi guys,.

  I have a slideshow that has 8 images with thumbnails for example. I want to move the caption (text box) for each image in the other location, but if I adjust the caption of an image and others, their legends are exactly in the same position as the caption for the first image.

  There must be a work around for this surely,

  I came across this post - help with captions in slide shows , but I do not understand what is needed to do this, if someone manages to do, could you please limit exactly what is needed to get the look. I tried to disable "change set" and that did not help either.

  I hope someone can help here, I really need to be located in different places for each image captions in the slide show.

  Thank you!

  You can use any composition in the form of a slide show and add the text block in the container, place the block of text in a different location for each container.

  Thank you

  Sanjit

• Use: OLD and: NEWS in the triggers without oracle for each line

  I use Oracle 10 g.
  I want to insert a row in the table of the newspaper by each Witch of the query is executed on a table.
  And I want to insert on the line at a table of detailed log for each row changed in a query.
  I want to add modification date and time for each line in the two tables of the newspaper and I want it to be similar.
  
  So, I'm curious about using old and new variables without using for each row on the creation of the trigger. Is this possible?
  Or maybe I can score some variables static for this query (so sysdate will be the same and some of the Pavilion for the insertion of small newspapers)?
  Or maybe is there other ways to do it?

  LeopoldStoch wrote:
  But if I use sysdate in each trigger and it will update something as my sysdate 100000 lines will be different for different lines but I want it to be time and on the same date.

  Hi Leopold,

  Then today is your lucky day :-): sysdate is the same for all the DML. Even if it takes more than one second:

  SQL> create table rob
    2  ( id int
    3  , creation_date date
    4  )
    5  /
  
  Table created.
  
  SQL> create trigger t
    2  before insert on rob
    3  for each row
    4  begin
    5          :new.creation_date := sysdate;
    6  end;
    7  /
  
  Trigger created.
  
  SQL> set timing on
  SQL> insert into rob (id)
    2   select level
    3     from dual
    4  connect by level <= 10000
    5  /
  
  10000 rows created.
  
  Elapsed: 00:00:00.37
  SQL> set timing off
  SQL> select min(creation_date)
    2       , max(creation_date)
    3    from rob
    4  /
  
  MIN(CREATION_DATE)  MAX(CREATION_DATE)
  ------------------- -------------------
  07-05-2010 09:29:24 07-05-2010 09:29:24
  
  1 row selected.
  

  You can read more here: http://rwijk.blogspot.com/2008/07/sysdate.html

  Kind regards
  Rob.

• How do I either set channel name of a graph of cluster or get a 1 d waveform chart to start different time (t0) for each line of the waveform?

  I have a chart single 2D out a conditional of a loop indexing output such that over the rows of the table are not the same size. -Basically, they have different starting and ending points and sizes. -Not so concerned by the endpoints, because as soon as I get correctly starting points, everything shows fall in place.

  The challenge is that when I try to have the variable t0 (start time) for each line, the wave of construction vi form would always keep each line at the same starting point.

  I used the approach bundled with success (the cluster approach ensures that each waveform starts at different times according to the guidelines of my t0 defined for each line) but then I'm not able to get in the channel names I could make using the graphical approach (wave generation) waveform.

  In essence what I get here, I'm losing here.

  Because I don't want one of my mentors, Bob and Altenbach have fed up with me I have attached a vi this time

  Attached VI shows a combination of the two attempts (first with the waveform graph) and then with the graph of cluster

  1. with the first (graphical waveform), I get my channel names as you wish, but the alignment of the wave is not correct.

  2. with the second (graphical cluster), the alignment is good, but I can't do the names of channel in the chart, even if they are present in the cluster.

  I read some reviews that mentions that attributes can be displayed with waveform and data Dynamics (not clsuters) so I guess that's why.

  I saw another report indicating the start time for a waveform 1 d will always remain the same for the rest lines defined for the first line even if changed for the following lines in a loop.

  So I guess my question is: what is the way around questions like that?

  First of all, let me be the first to the congratulate and thank you for finally posting a code!  I'm not 100% certain I understand your question or your code, but I have an idea, perhaps, of what you want to do, so I wrote a little VI who made something simple that could be relevant.

  You mention waveforms of different lengths and beginning at different times.  You also want everyone to have a unique attribute (although I'm not sure what you want to do with the attribute).  So, I did the following:

  1. Generated an array of 100-sample random to represent one second of a waveform.
  2. Created 4 waveforms on this 100-sample basis.  The first waveform (channel 0) is just these 100 points.  The second, 1 channel, is the concatenation of string 0 with the base of 100 samples, or a waveform "double".  Channel 2 is 1 string concatenated with the base, and channel 3 is 2 string concatenated with the base.
  3. In order to trace the four channels that they rest 'on' the other, the waveform has the number of the channel added to it.  Channel 3 is 3 + (4 copies of the basis of 100 points), a waveform 400-point random centered around a shift of 3.
  4. All channels have dt value 0.01 (but I guess I could have varied, as well).
  5. To make the channels start at different times, I started channel N N seconds before channel 0 (by subtracting the index of the loop, I, T0).
  6. For each channel, I created an attribute called "Chan" equal to "Channel N" (where N = 0, 1, 2 or 3, as the case may be).

  This is the plot that results. Scale X is the absolute time value (no Date) using the 24-hour HH: mmS format.  You can see that the plots are 1, 2, 3 and 4 seconds of time, and are offset from each other by a second.  I used the trace attributes to change the name to the respective attribute.

  

  The code to do this is very simple - I almost don't need to show it, because I think it is completely described by the text above, but this is here:

  

  Now, it was not that much faster that some of your previous posts, when you refused to your postcode, "guess us" what you wanted (but not to not correctly guess), you tried to "push" us in the right direction (still refuses to post code), and no one seemed very happy?

  Bob Schor

• The check box for "see windows contents while dragging", shoots himself

  The check box for "see windows contents while dragging", shoots himself.    Irritating!   Any ideas?

  Hi Mr_Sleeze,

  See if you can set a registry key verification:
  How to use Group Policy to configure auditing of Windows registry keys
  (The above article was written for Windows XP Home edition, but should work as well under Vista).

  DragFullWindows is the value you want to monitor.
  http://TechNet.Microsoft.com/en-us/library/cc787526.aspx Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Box on each line

  Hello
  
  I have a query table emp_skillset. I would create this newpage/form and report so that users will be able to insert the records and select users will be able to run the report.
  
  "Select fname, lname, email_addresss, Skillset, certified of emp_skillset."
  
  I display 'skills' column as checkbox using LOV. I would like to have the "certified" column also displayed as checkbox against the every box skill level.
  For example.
  
  Certified skill set
  
  UNIX IS
  Windows N
  Database N
  Apps N
  
  The issue I encountered was this certificate column appears only once for all the lines of skill level. What I need is check box against each box skill level.
  Any suggestions or pointers of how to achieve this would be welcome.
  
  Thanks in advance
  SS

  Hello:

  You could start by creating a table for each of the emp, skills, category and subcategory entities. In view of these base entities, you then create tables to define the relationships between these entities.

  Something along the following lines should work

  EMP(empno,Ename) - Bill/Joe
  Category (catno, cat_name) - Windows/Unix/Oracle Apps
  sub_category(sub-cat-no,catno,sub-cat-name)--UNIX (Linux, AIX,...), Oracle apps (SCM, CRM...)
  level of skills (skillset-no, empno, sub-chat-no., UNIT) - Bill (Linux, Y), Joe(Window,N), Joe (Oracle apps, Y)...

  CITY

• How to access a column value in a Select list in a tabular presentation for each line

  Hello

  Environment: Using Oracle APEX v4.2.1 on an Oracle 11 g 2 DB

  In a tabular presentation using the following example query, i.e.:

  select
  "EMPNO",
  "EMPNO" EMPNO_DISPLAY,
  "ENAME",
  "HIREDATE",
  "SAL",
  "DEPTNO",
  "MY_LOV"
  from"#OWNER#"."EMP"
  
  

  I need access to every line of my sub form of table, the EMPNO of this line value, within a list of selection (query based LOV) in the column "MY_LOV."

  So, basically, the MY_LOV column in my table presentation, would be a list of selection (query based LOV) where MY_EMPNO =: EMPNO (first column in the select statement above), for each line of the tabular presentation.

  With the help of a picture ( Tom's Blog ) and assuming 'Deptno' column here is actually my new column, i.e. "MY_LOV, I want to know how this list of selection based on lov query would be able to access each EMPNO down in the form of tables, i.e. 7839, 7698, 7782 etc.?

  

  Any help would be appreciated.

  Thank you.

  Tony.

  Hi Tony,.

  Take a look at the API APEX_ITEM for LOV

  http://docs.Oracle.com/CD/E37097_01/doc/doc.42/e35127/apex_item.htm#AEAPI208

  Kind regards

  Brad

• change the color of line based on the value of column 5 Apex in the classic report

  Version of the apex 5.0.0.00.31

  Standard universal theme

  Page theme default template

  Classic report

  Foldable report template

  Hello

  I know this question has been asked several times here, but I'm working on 5 Apex and need to know the correct way to do it in this version.

  I need to change the color of the text of the entire line (no background color) based on the value in one of the columns of the classic report. I have just two conditions, if the value of column = Yes, color should be red, otherwise it must be green.

  I am new to jscript and css, so appreciate if someone can tell me the solution with steps.

  I have already checked this link that changes the value of the column, need to do something similar to the whole line.

  https://tylermuth.WordPress.com/2007/12/01/conditional-column-formatting-in-apex/

  Hi coolmaddy007-Oracle,.

  Here's an example set up on the apex.oracle.com according to the specifications you gave: https://apex.oracle.com/pls/apex/f?p=35467:1

  Version of the apex 5.0.0.00.31

  Standard universal theme

  Page theme default template

  Classic report

  Foldable report template

  Here is how it is done:

  Create a dynamic action with the following specifications:

  Name: Give the appropriate name

  Event: After refresh

  Selection type: region

  Region: select your region classic report

  Condition: No strings attached

  Action: Run the JavaScript Code

  Fire on loading the Page: Yes

  Code:

  $('td[headers="JOB"]').each(function() {
    if ( $(this).text() === 'MANAGER' ) {
      $(this).closest('tr').find('td').css({"color":"red"});
    }
    if ( $(this).text() === 'SALESMAN' ) {
      $(this).closest('tr').find('td').css({"color":"green"});
    }
    if ( $(this).text() === 'CLERK' ) {
      $(this).closest('tr').find('td').css({"color":"blue"});
    }
  });
  

  NOTE: Download the selector appropriate for your knowledge $('td[headers="JOB"]') case using firebug/browser development tools.

  Items concerned: leave blank.

  PS: Changed the example to change the color of text instead of the background color.

  I hope this helps!

  Kind regards

  Kiran

• Highlight a line in the classic report based on condition

  HI all the gurus

  Apex 4.1.1 using oracle 11g linux oc4j

  I want to emphasize a line where #column_value #= 'Y' to keep gray others like normal report parameters.

  I have a simple sql query

  SELECT PK_ID,
    FIRST_NAME,
    LAST_NAME,
    INITIAL_REG_DATE,
    MAIL_DATE,
    BEGIN_DATE,
    END_DATE,
    END_DATE-BEGIN_DATE as "#days",
    BEGIN_STATUS,
    END_STATUS,  
    COMMENTS,
    DELETE_FLAG,
   case when  DELETE_FLAG='Y' then 'GREY' else '#f0f0f0' end  DELETE_FLAG ,
  INITIAL_REG_DATE+(END_DATE-BEGIN_DATE) "New Reg end date"
  FROM SOR_TRACKING_DEL
  where pk2_id =:P216_Detail
  order by mail_Date desc
  
  
  
  

  I created a dynamic action

  who will be the tree on load, LINK on this classic report

  $("input[name=f29]").each (function () {}

  var lThis = $(this);

  {if (lThis.is("Y"))}

  lThis.parents("tr:eq(0)").children("td").css({"background-color":"GREY"});)

  } else {}

  lThis.parents("tr:eq(0)").children("td").css({"background-color":"#f0f0f0"});)

  }

  });

  But it doesn't change color as expected...

  Kindly help me!

  Thank you

  Scott and Tom

  Thank you guys for looking into this.

  Pls ignore my incorrect explanation and my inexperience with jquery.

  I read some blog and trying to do the same on the classic report, but all blogs, I found to this day called interactive report or tabular report, that none of them mentions classic report.

  I assume that using the classic report will not be a good idea to start with. :/

  I don't know if this is the proper syntax and logic to highlight the line

  $(function(){

  varDELETE_FLAG = $(this);

  If DELETE_FLAG.is("Y"))

  {

    DELETE_FLAG.parents("tr").children("td").css({"background-color":"GREY"});).

  }});

  I also created app here

  http://Apex.Oracle.com/pls/Apex/f?p=35155

  get out of the workspace

  Tester/testing

  request 35155

  Thanks again.

• How to color line specific "BOLD" / inactive in the classic report (oracle apex).

  I have the classic report in oracle apex

  with query below

  Select EMPNO, ENAME, HIREDATE, ADDRESS of emp COMM;

  If the ENAME = "John".

  so, I want to do any "BOLD" line and readonly/inactive. (set of rank who name John)

  Thanks in advance...

  Simple answer: see this blog: reports APEX: color line based on column value

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• onMouseOver displays the ToolTip of hidden column of the classic report

  What: The goal:
  Access more information that fits on a single line of the screen without using multiple fixed lines.
  
  Background:
  Classic report with 18 data elements (columns) visible. At the search box, and the user can choose the number of rows displayed.
  Some data elements can be long (20 to 30 characters) compared to the width of the screen. The element more right data risk of 100 characters.
  
  Proposed strategy:
  (1) display the n first characters of the item (s) long in the report.
  (2) display the entire item onMouseOver.
  
  Proposed approach:
  (1) for each column with the data of type long, contain the integer value in a hidden item.
  (2) value of (hidden) long display in tooltips (bubble? / ball?) on this value onMouseOver.
  
  Note: It is not framed to help/Help for a column but the display of the value of long type for a particular element in the line of a column.
  
  Search feature:
  (1) to reduce maintenance, wants to set up for several columns using a single common block of code.
  
  Question:
  In view of the other approaches, you know, it's a good approach to achieve the goal? Alternative approaches?
  
  Howard

  Well it took some time, and you really made me work for it. :)

  For flight hover end result on the job column Ln Nm.
  http://Apex.Oracle.com/pls/Apex/f?p=991202:1

  I added some old code, I had laying around. It adds a bubble that will stay for 5 seconds or until you click Next or move to another record.

  What I would do at this point, it is simply truncate the length of the Nm long to something short (with a substr). Use any indicator wished to hover. Like for example these glasses it's really up to you.

  You will see there is a PLSQL AJAX callback where you can retrieve and format the content of the pop-up window to everything you want. You can make it real.

  Here's what I did:
  1. the new procedure of ShowJob javascript.

  function ShowJob(pThis,pId){
       this.dTimeout;
        clearTimeout(this.dTimeout);
        this.dGet = dGet;
        this.dShow = dShow;
        this.dCancel = dCancel;
        var get = new htmldb_Get(null,$v('pFlowId'),'APPLICATION_PROCESS=FULL_LONG_NAME',$v('pFlowStepId'));
        this.dGet();
       return;
  
       function dGet(){
             this.dTimeout = setTimeout("this.dCancel()",6500);
            get.addParam('x01',pId);
             get.GetAsync(dShow);
       }
  
       function dShow(){
             $x_Hide('rollover');
             if(p.readyState == 1){
             }else if(p.readyState == 2){
             }else if(p.readyState == 3){
             }else if(p.readyState == 4){
                   $x('rollover_content').innerHTML = p.responseText;
                   $x_Show('rollover');
  
              var l = findPosX(pThis)+pThis.offsetWidth+5;
                   var t = findPosY(pThis);
  
              $x_Style('rollover','left',l + 'px');
                   $x_Style('rollover','top',t + 'px');
  
  // This math would center on the vertical
  //                 $x_Style('rollover','left',findPosX(pThis)+pThis.offsetWidth+5);
  //                 $x_Style('rollover','top',findPosY(pThis)-($x('rollover').offsetHeight/2)+($x(pThis).offsetHeight/2));
                 document.onclick = function(e){
                 dCheckClick(e);
                 }
             }else{return false;}
       }
       function dCheckClick(e){
            var elem = html_GetTarget(e);
            try{
                      var lTable = $x_UpTill(elem,"DIV");
                      if(lTable.id!='rollover_content'){dCancel();}
                      else{}
            }catch(err){dCancel();}
       }
  
       function dCancel(){
             $x_Hide('rollover');
            document.onclick = null;
             get = null;
       }
  }
  

  2 rollover div on the page footer (div id = "reversal"...). Of course, this could also be a region.

  < div id = "reversal" style = "display: none;" color: black; background: #FFF; border: 2px solid #369; width: 290px; position: absolute; padding: 4px; » >
  < div id = "rollover_content" > < / div >
  < / div >

  3 PLSQL AJAX callback. : FULL_LONG_NAME

  -- select your value with apex_application.g_x01
  
  htp.p('You hover over ' || apex_application.g_x01 || '
  ');
  htp.p('Here is the Full Long Name: XXXXXXX XXXXXXX XXXXXXX 1234565');
  

  4 changed the Nm of Long column to have a link with the onmouseover call that calls the new procedure ShowJob. I made the assumption that with the NUM parameter, you could go the full record of what you need.
  onmouseover = "ShowJob(This,#num#) '"

  This should be it.

  Let me know what you think.
  -Jorge

  Published by: jrimblas on April 22, 2013 13:05: added code to validate for the completion

• How to avoid the total general of the classic report when the column break is installed in the Apex

  Hi all

  I develop application using Oracle Apex 4.2.0.

  I created the classic report Page.

  That I have summarized a column by selecting the check box check sum for the column.

  His shows the Grand Total.

  Then I chose the columns to break to the first column.

  His show the total groupwise and total as well as great as image below.

  

  My requirement is

  Need to hide total(Total:)) GroupWise or total general. I need to show any a total, not both.

  How to do this?

  Thank you

  Su.GI

  Su.GI wrote:

  Hi, thanks for your response.

  I use theme - productivity Application - issue 26

  -Standard model

  Report - report of Standart for classic report model.

  The above CSS code where I want to use in the page or report or model region.

  Specify a static region ID for the report area and put the following CSS rule in the CSS Inline property page:

  #static-region-id .uReportStandard tr:last-child td {
    display: none;
  }
  

  where static-region-id is the ID specified for the region.