Add the printer gives error.

Similar Questions

• Cannot add the printer network Windows 7 64 bit

  My laptop Home Premium 64 - bit of Windows 7 (client) cannot add the network printer that sits on the Windows 7 Ultimate 64 bit computer. A client XP computer easily added the network printer. When you try to add the network printer, the Windows 7 client searches for the driver on the host computer and says "unable to connect to the printer - the operation has failed with error 0x000003e3. I downloaded the driver from the manufacturer of the printer to the client computer. I also disabled the firewall on the computers... Any help would be appreciated.

  Hello

  ·         What is the number and model of the printer that you are using?

  ·         How many computers are connected to the host computer?

  ·         You are on a domain network?

  Method 1:

  You can check the items below that explain how to install a printer in Windows 7.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 2:

  a. now follow the document below to add the printer to the Windows 7 computer.

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  b. If the steps above does not help try the procedure below.

  We need to change the port and check. Let us perform the steps below to install this printer and check.

  a. Click Start, click Control Panel, and double click on devices and printers.

  b. click Add a printer.

  c. Select "add a local printer.

  d. Select "create a new port". Select "Local Port" as the port type.

  e. in the "type a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  And then click Next.

  f. Select the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.

  g. complete the installation.

  For additional help, refer to the article below.

  Printer in Windows problems

  You can also check out the link below that addresses the same issue when you face:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-0x000003e3-when-trying-to-install-network/2348b57b-7448-E011-8dfc-68b599b31bf5?msgId=d577ab02-DC48-E011-8dfc-68b599b31bf5

• whenever I have add the printing shortcut it disappears after I close how make it permanently

  I use the personalization feature to add the print icon to a toolbar, it is there and works up until the closure of firefox and then when I open it again once he went and I should add again

  You can check for problems with the file localstore.rdf.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  What security (firewall, antivirus) software do you have?

  Some security software has virtualization or sandbox features that can cause problems to protect and restore files in the Firefox profile folder.

• HP Officejet Pro 8620 does not print, but the document is sent to the printer without error

  I bought a HP Officejet Pro 8620 and connect 2 computers via a wireless connection with the latest driver.
  In the first computer (windows 7) I can print without any problem
  On the second one (windows 8), when I try to print, I can see in the windows printer spooler file that I'm going to print. The file is sent to the printer, without error, BUT nothing happens.
  I already tried reinstalling the drivers, restart the computer, the printer. I tried to connect to a wired network. It still does not. It's very weird but I got no error, just does not print. I thought that the printer does not work, but on the second computer I can print.
  Thank you for your advice

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• How to add the printer in Photosmart 7525 wireless network to my laptop?

  I have already added my new printer Photosmart 7525 to my home network.  It is installed via USB with the complete HP 7525 software (downloaded from HP) on my HP desktop computer that is running Windows 7 Home Premium 64 bit and I shared the printer on the desktop.  I want to access the printer even my laptop which is connected to my network via a router wireless (N).  The laptop is running Windows 7 Home premium 32 bit.  On the laptop under Windows, when I click to "add a network printer", it "sees" the printer 7525 shared desktop, and she also 'sees' 2 iterations of the 7525 which are connected to the network (I used the control panel of the printer to add the 7525 to wireless connection before never hang on the printer to any PC).    Under Windows, when I click on 'Add' my printer to the laptop, it pops up a window asking me to choose my printer model in the list of printers HP listed in the menu drop-down (it is looking to add the printer driver, I think).  My Photosmart 7525 is not in the list.  Photosmart 7500 series of printers is not also listed - even when I refresh the list of printers Windows drop-down list by using the Windows Update option.  So, what should I do - download and install the Photosmart full 7525 software and then add the 7525?

  Hi cwr64,

  It is easier, more likely to work, to install the software of feature complete on each computer you want to use this printer.  I think you can use the printer with the USB cable connected to a printer and the Wi - Fi connection for other systems on your network home.

  The exception: CE devices don't use FFS - instead, you can use the mobile application for printing.

  Examples:

  How to print with an iPad, iPhone or iPod touch

  Printing from an iPad

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Reference:

  E-all-in-one printer drivers HP Photosmart 7525

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  Hello caromuna,

  It seems that other users have found a way to completely reset the printer back to the default settings, which can help with this question.

  The reset is discussed in this forum thread and seems to be a bit difficult to fill. Let me know if it helps to solve your problem.

  Photosmart 3310 ink system failure

• I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it.

  I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it. I made sure they are both connected to my home network and when I go to control panel / printer and try to add a network printer / wireless. He won't find it. Any ideas?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It will be useful.

• Wi - Fi does not feel that it was. I have delete and add the printer whenever I need to print.

  I have a Toshiba laptop (2 years) and had been printing wireless until about 2 months ago. Now, I have to delete and add the printer brother 7820-N USB to print for a day or less. When I try to againg another day it does not print.

  Hello

  Your question does contain all of the required information. Please provide us with the following information.

  1. have you recently updated anything on your computer before this problem?

  2 have you installed updates for the printer? If so, you may want to make back the driver and check if that helps.

  3. you delete and add the printer, of in the software?

  I suggest you follow the methods below to solve the problem:

  Method 1:

  Put the computer in a clean boot state and check if the problem still persists. Refer to the city link below to put the computer in a clean boot:

  http://support.Microsoft.com/kb/929135/en-GB

  Method 2:

  I suggest you uninstall the printer completely from the computer software, restart the computer, and then try to install the latest version of the printer software, from the link below:

  http://www.brother-USA.com/support/default.aspx?PgId=5&R3ModelID=MFC7820N

  Kind regards

  GauravPrakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to print, the queue varies from 0 document (s) in the printer queue: error

  * Original title: printer: error

  Overview:

  I have a Dell 560 which has Windows 7 64 bit is installed.  My printer is an old HP Officejet v40xi.  Have had two e connected by a USB cable for 3 years.

  Location:

  I ran out of ink.  I had not been printing a lot, so I did not fill the cartridges for several weeks.  I had a bright idea to reinstall the printer software for the printing/tool box I used on another computer.  I wanted to do a scan.

  I deleted the software and tried to download the software again.  The disk could not be downloaded on Windows 7 64 bit.  So I got the software from the HP site.

  When I try to print, the queue varies from 0 document (s) in the printer queue: error.  I reloaded the software twice, I put on a new USB cable and I changed the port.  I still get the same message.  Troubleshhot Windows printer also, indicates that it cannot determine the problem.  I went to HP and did not find any help.

  Does anyone know how to solve the problem?

  Hello

  -What is the full error message?

  I suggest you link and check if that helps.

  Unable to print? Print jobs are stuck in the print queue

  For more information, see the link.

  Solve a problem

  If the problem persists, contact HP support for help.

  Let us know the results. We will be happy to help you.

• How to add the "print" button in the payslip online

  Dear friends,
  
  How to add the "print" button in the payslip online (Employee Self Service). Is someone can pls let me know on this subject...
  
  regarding
  Swpana

  Hello

  Please see the following documents.

  Note: 332402.1 - can you mass printing of payslips online?
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=332402.1

  Note: 256072.1 - payslip V4.0 button "print" is missing
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=256072.1

  For more information on Advisor and Checkwriter deposit, please see:

  Note: 459306.1 - notice of Checkwriter/filing XML
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=459306.1

  Kind regards
  Hussein

• Get the error code 0x00000002 when you try to add the printer

  Original title: while my printer works on my destop

  My laptop: HP Pavilion notebook g6

  My Brother MFC j265w printer
  I could not add this printer to my laptop. I've always said [printer driver has not been installed: impossible operation completed (error 0 x 00000002)]
  While this printer work with my destop [home network

  Hi Dan,.

  The error code occurs if Windows does not connect to the printer.

  1 are even operating systems in the desktop and laptop?

  2 are the correct printer drivers installed on the computer?

  Run the Fixit and check if the error code occurs.

  http://support.Microsoft.com/GP/printing_problems

  Answer please if you have any questions.

• Add the "Print Directory Listing" option to the context menu of Windows Explorer

  Get the error message when you try to use the "Print Directory Listing" solution found in:
  http://support.microsoft.com/kb/321379/en-us on my new Windows 7 system (from February 2010).

  Could create the context menu of Windows Explorer for the task, but selecting just results in the following error message:

  "This file doesn't have an associatd with her program to perform this action. Please install a program or... to create an association in the default programs control panel. »

  Wentback and checked my Regedit work.  Even deleted the new key and she recreated (just in case.)

  NOTE: I had successfully used the instructions in this article to add "Print Directory Listing features on Windows XP systems, so I reviewed these instructions to see differences and noticed that it * no. * 'associate' step for Vista/Win7 in the article, but this step still shown for XP.»

  And, there seems to be NO WAY to associate a program (in this case, a ".bat") with all of 'record' as target.  Only choices I see these in the 'control panel default programs ' are'. [extensions] "and the protocols.

  So I'm puzzled.

  Any help would be appreciated.

  SJ Pratt

  I just tried this with instructions to the http://support.microsoft.com/kb/321379/en-us link you provided and it worked fine.

  In view of the error you get here are my assumptions to what may be the problem.  Please try these out and answer:

  -Because it denounces, "file doesn't have an associated program.." I would make sure that when you created with Notepad the file .bat you na not to create a file called 'Printdir.bat.txt' or 'Printdir.bat.some_bad_extension '.  If your Windows Explorer settings are set to hide file extensions when you look at a file name, then maybe the REAL file extension you give the command file is being hidden on your part and Windows does not know how to open a file with the extension hidden type.  Make sure that you can see all the file extensions and make sure that the batch file is named with the .bat extension.

  -If you see very well all the file extensions in Windows Explorer and your file is called really Printdir.bat, make sure that you have saved in your root directory of Windows.  If you access %windir% you see Printdir.bat inside there?  If this isn't the case, put it there.  If you do, when you double-click the .bat file Windows run without error and print the dir?  If it works, you know that the batch file works correctly.

  -There's a typing error in the instructions for Vista/Windows 7, check that your registry entries look like this:

  HKEY_CLASSES_ROOT\Directory\shell\Print directory Listing\command

  This shows the new key under shell called "Print Directory Listing" and inside this key/folder another folder/key named "command".

  To within the key/folder 'command', it takes only one entrance with the name of (by default).  Double-click (default) and make sure that its value data is set to:

  Printdir.bat %1

  -You shouldn't need step "the associate" in Windows 7.

  -You can add "Add Print Directory Listing to the context menu of Windows Explorer" for the title of your question so that others can find it.

• Pavilion 500 series: printer does not complete the print job & error message

  Got a HP Deskjet 2542, but recently bought a new HP, Pavilion of the 500 series desktop computer.  When you try to print a document that is located at 3 pages, it will print the first page, and then part of the second page, then an error message appears.  Went to the HP troubleshooting & tried everything, but nothing seems to fix the situation.  Any ideas or suggestions?

  Hi @Themommy,

  I saw your post about the error message that appears when printing with your HP Deskjet 2542.

  I need a little more information to give you the best course of action.

  What is you receive the exact error message?

  Without this error message, I suggest trying a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing problems. I recommend you to download and run the HP print and Scan Doctor, if she doesn't fix it automatically let me know what errors or messages that you receive.

  You can always try to uninstall the printer software and then by downloading new firmware for you printer. Click on this link to get the all-in-one HP Deskjet 2540 Printer series full feature software and drivers.

  Just note that you may not be able to download the software right now. If you click on the link above and you get this pop-up window, you may need to try the page later.

  

  Please let me know if these steps solved your problem, or you receive the exact error message.

  I look forward to hear from you!

  Thank you

• The print spooler errors

  print spooler will not stay

  Hello

  1. could you give me the full error message?
  2. based on which application you want to print?
  3. What is the brand and the model number of your printer?
  4. are you able to print the test page?

  Method 1.
  First, let us run the fix in the article below and check.
  Problems printing and printing errors
  http://support.Microsoft.com/GP/printing_problems
   
  Method 2.
  Clear printer spooler files and activate the spooler service
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.
  e. now restart the print spooler service and check.
   
  For more information and procedures, refer to the article below.
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot add the printer

  I can't add a printer via my Control Panel Printers and Scanners.

  You can try to repair the drive with disk utility permissions: https://support.apple.com/hr-hr/HT201560