I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it.

Similar Questions

• my printer and computer are both connected to my wireless network, but I can't print documents

  I have a HP Photosmart 6180 and am using Windows Vista.  Both the printer and the computer indicate that they are connected to my wireless network and my computer shows my printer on the network.  When I try to print a document from my computer, nothing prints and printing on my computer says a mistake of the printer.  The printer itself works fine and HP diagnostics indicate that everything is ok.  Any suggestions?

  OK, go to start > Control Panel > printers and delete all instances of the printer.

  Next:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• While trying to install a Linksys E1500 he repeats that my computer is not connected to the router.

  Computer problems and the router

  I have a windows xp 2002 with service Pack 3. While trying to install a Linksys E1500 he repeats that my computer is not connected to the router. Ive tried a new cable and it does not solve the problem. He also said that my computer does not have wireless capabilities. Any suggestions?

  You'll be much more likely to get useful (or even possible) suggestions if you provide the full text of the error messages you get, without paraphrasing.

  For example:

  He repeated to me that my computer is not connected to the router. --> What is the real error message?

  He also said that my computer lacks wireless capabilities--> what is the error message itself?

  You are "trying to connect via a cable" to the router or you're talking about your Internet service (for example, the router is connected to the Internet via a cable)?

  You think that your computer has "wireless capabilities?  Open the Device Manager (start > run > devmgmt.msc > OK), then click on the + sign next to "network adapters."  Please provide the names of any devices listed there.

  Is your computer without a name, a laptop?  There a name of brand anywhere (for example, Toshiba, HP, Dell, etc.)?

  Open System Properties (start > run > msinfo32 > OK)
  Click Edit > select all
  Click Edit > copy
  Right-click in your response here and select Paste
  Be sure to hide the "System name" or "User Name" if it makes you feel better, but please do not remove anything else.

• Windows\System32\LogiLDA.dll what is this file and I need this file? The message says it can't find the module.

  What is this file and I need this file? The message says it can't find the module.

  Hello

  You have recently uninstalled software Logitech?

  Follow the steps in the solution here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/specified-module-could-not-be-found-logildadll/9c227c15-D0D6-4e24-946f-ac0dbbbb10d1

• When I try to run Chkdsk, Windows says it can't find it.

  When I try to run CHKDSK it says that windows can not find HELP CHKDSK

  Hello

  1. Why you run chkdsk on your computer?
  2. Have you made changes on the computer before this problem?

  I suggest you go through the following link.

  How to make Windows XP check disk errors.

  http://support.Microsoft.com/kb/315265

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Tried to install a printer in windows 7 using a vista driver. Now, I get an error 0 x 00000002.

  The problem occurred when trying to install a network printer on my laptop that is running Windows 7.  Now, when I select the printer in the menu "add a printer" and press "Next", I get 'Unable to connect to the printer' & 'the operation failed with error 0x00000002 ".
  The printer is a network printer, connected to my desktop running Vista.  In addition, it is a Brother MFC-8300.
  I can install the printer when it is connected directly to my laptop, but when I try to add it as a network printer, I have the problem that I have just described.  I should mention that I had to install a special version of the driver ("Brother MFC-8300 v.2") on my desk to solve another problem, I had with another computer on the network, which was running Vista-64 (see http://www.vistax64.com/vista-print-fax-scan/77226-brother-mfc-8300-printing-blank-pages.html).
  So basically this is what happens:
  (1) I click on 'add printer '.
  (2) I click on 'Add a network, wireless or Bluetooth printer.'
  (3) I select ' Brother MFC-8300 v.2 on VISTAMACHINE ' and click 'next '.
  (4) a "Windows printer Installation" window appears and says "connection to Brother MFC-8300 v.2 on."
  VISTAMACHINE"and underneath"seeks pilot."
  (5) a "Add a printer" window appears with an "X" inside a red circle next to the mention 'to connect to the printer.
  "Windows cannot connect to the printer", and "Operation failed with error 0x00000002".
  Does anyone know what I need to do?

  Create two printers on the computer, the device sharing.  Make a word share name, do not use the name of the driver for sharing.  Spaces in the name to make it even more difficult when you set a SMB (local port) connection to the printer.  Set the Port for two printers shared the same (I assume that the device is connected to a USB Port).

  Use the driver Vista Inbox for the part for 32-bit machines.  Use the driver provided Brother (Brother MFC-8300 v.2) share for 64-bit machines.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• I just installed the recognition speech dragon, but when I try to open this said error msg "cannot find multi media device.

  I just installed recognition speech dragon, but when I try to open this msg of error says "cannot find media device - Hosea t check if your computer has a sound card or if the wave multimedia component is missing from the sound card.»  my monitor has built-in speakers and I can listen to music, news, etc.

  You have a microphone?  He is looking for an INPUT device, not a one OUTPUT.  Also, check device manager to make sure that you have not a driver problem.  To get the Device Manager, click Start and right click on computer, then click Properties.  Click Device Manager, and then look for entries with? or! beside them, which indicates a driver problem.  Finally check that your microphone is plugged in the right place on the computer, unless it is based.

  I hope this helps.  Good luck.

• Additional licenses purchased in 2004, but they are not loaded on the server, and they can't find the hard copy of the licenses to load them in.

  Asked me to take over the COMPUTER Department of a small Christian school. They are running SBS 2003. They bought licences for additional client access in 2004, but they are not loaded to the server and they can't find the hard copy of the licenses to load them in. Also, they purhcased of XP Pro and Office 2003 licenses (I have the disks and keys to install but do not know how many licenses they own) and they are not either of the paper copy of these licenses. Is there a way to contact Microsoft to get the licenses? Any help would be appreciated.

  Bill

  original title: recover lost Volume Licensing

  I just figured this out...

  I called the 1-866-230-0560 Option 3 Volume licenses and talked to someone who searched under the name of the school in order to locate licenses. It is even searched under our zip code and found other licenses that have been purchased by the school where the dealer abbreviated the name of the school.

  I hope that this is useful information to others in the same situation.

  Bill

• I have 2 Mozilla Firefox on my desktop. They are both version 41.0.2 - in my installation and delete I find only one. How can I delete one of them?

  I tried to update to Mozilla Firefox and I had another icon on my desktop. Now, I have Mozilla Firefox 2 and they are both Version 41.0.2. They are both exactly the same thing when I open the. I see only one on my add/remove program location so I won't delete it because I could delete them both. Can you help me?

  You can remove one of the office shortcuts if both point to the same firefox.exe in the same Firefox program folder.
  You can keep the one with the correct version information where the other is an older version of Firefox.
  Note that Firefox 42 will come out next week (Tuesday).

• I have IE6. I need to install service pack 1 Windows XP. I can download it, but I can't install it because it does not connect to the server. How can I work around this problem?

  I recently had to use the restore disc that came with my computer. Accordingly, I now have Internet Explorer 6. To switch to IE7 or IE8, I need to reinstall the Service Packs. I can download them, but I can not install them because I have IE6 and downloads could not connect to the server. How can I fix?

  Hi wildcar

  You can go directly to Windows XP SP3 . Download and install it from the link below.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the text that says: it is only intended for Professional computer and network facilities.

  Important note: If your system has an AMD processor, download them and install Microsoft windows update utility for the processors not intel from the link below, before you install Windows XP SP3.

  Update for Windows XP (KB953356)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=23751

  After you are done you can try to install ie8 again, if it has not already been offered through windows update.

• Trying to install my printer Kodak after new XP installed. Error message {procedure entry point could not be found in the library of links Dynamics cscomp dll}

  I had a Trojan horse and had to do a reinstall of windows XP Pro is now trying to install my printer but I get the error message saying "entry point procedure GetMessage DLL is not found in the cscom dynamiclink library dll. Help, please!

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/308028

  It will be useful.

• After trying to install word printer epsom has not stopped workung - uninstalled but stll not working not

  After trying to install a printer, Epsom SX130, on Windows 7, WORD has stopped working - have tried uninstall & restore but still cannot use WORD. After paying only £ 65.00 to restore the office, I'm very unhappy. It is the only document that we need to print, others may be sent by e-mail, but now I can't even open Word documents to use as attachments to an email. I'm totally desperate, do we buy a 'small' I wonder. More than 60 years, when I started it, maybe I was just too old or it's Windows 7 just make my / our life uncomfortable for us to update: Please keep in mind, I'm very, very, ridiculous with computers. We have done with a drive by the way if that makes a difference & downloaded an update. If the answer is "not compatible" that's fine, I can make documents on the old computer, BUT need words for emails: i.e. repeat orders etc. which are vital to our system of new physicians.

  Am totally fed up now...

  Hello

  1. what version of Microsoft Office are you using?

  2. you receive an error message when you start Microsoft Office Word?

  You can perform the system restore the computer to the date when the changes were made not (before the date where Microsoft Office was working fine).

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  For further assistance on the question, you can post your query in Microsoft Office community:

  Microsoft Office community

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

  Wireless connections

  I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

  Hello

  I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

  You can also try the following methods and check if it helps.

  Method 1:

  Update a network adapter driver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Troubleshoot network adapter problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• I have I can not reinsttall printer drivers or uninstall the old that I can't find. Help!

  I have windows xp and a hp color laserjet 2600n. He worked for many years, but now I get an error of queue and cannot use one of the microsorf office programs. Error prevents from print or print previews. I tried to go into the printer and fax folder but cannot as it won't come back. Also, I went into Add / Remove programs and see some drivers to uninstall. I tried to install new printer drivers, but they will not install.

  Any help appreciated

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  More information

  If you do not have the CD that came with the printer, download the driver here--> http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=446154&prodTypeId=18972&prodSeriesId=446153&swLang=8&taskId=135&swEnvOID=228

  Personally, I would use the 3.7 MB "package of Plug-and-Play" rather than the 86.6 MB 'Full Software Solution.'  In general, you don't really need all packages of auxiliary software that HP bundles with its printers - but it's up to you.

• When I'm printing to a file I can't find the file. How can I find?

  When I'm printing to a file I can't find the location of the file.  How can I find?

  It depends on the application, but it normally goes into the Documents folder.

  What you are trying to print to file?