Add the variable to a variable... ?

Similar Questions

• Add the variable of presentation in a prompt SQL results

  Hello friends!
  
  I have a prompt with the time Dimension (year (p.v. v_year) and month (p.v. v_month)). Then I have another guest of departments in the same page and I want to compel departments depends on my year and selected months before.
  
  I know to do with variable presentation, if I go to SQL results in prompt Department and ADD the following: "WHERE"Sun Time"." Year=@{v_year}"it works but I want to add months also!
  
  How can I do?
  
  
  Thank you very much!!!

  Hello

  Use single quotes...
  "like... month = ' @{var_month}"

  hope this can work...

• .chm TOC using variables - print SSL does not recognize anything after the variable

  Here's something interesting that I came across today.  I think that maybe it's a bug in RH 10.

  I create .chm TOCs using variables.  For entries of table of contents of page, a content before the variable in the table of contents entry converts to the table of contents printed without problem.  But any content after the variable is ignored.  It's only a problem with the pages in the table of contents.  Books are very good.

  For example:

  Book TOC:

  "Clinic - {variable} {variable}.

  This translates very well to the table of contents printed in printed documentation SSL.

  Table of Contents Page:

  "Clinic - {variable} {variable}.

  Aside from the link in the table of contents page, the code for the TOC book and page table of contents is the same.  But, for some reason, anything after the * first * variable in the page table of contents is ignored in the table of contents printed for printed documentation SSL.  It doesn't matter if it's another right or variable text.

  

  In the image above, both the "clinic - display the list of participants in the" book of the TOC and TOC page on the left contains two variables:

  "Clinic - {variable} {variable}.

  On the right page "Clinic - Participant list", the variable "screen" is ignored and deleted page table of contents only when the layout of the chapter is created for printing SSL.  HR will remove anything after the first variable in the table of contents page, whether it's a text variable or right.  HR does not remove the antything of a book TOC when the presentation of the chapter is created for printing (visible in the picture above).

  Post edited by: eeddings - added image to visually show the bug.

  When you generate print books will go in the printed document.

  Pages in the table of contents of the document are not based on what is in the table of contents above, but on the topic title.

  Add the variable there and it works.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• How to create a loop to add gradually to the variable?

  I want to create a loop for which will activate 1000 times. Initially, I put a variable to zero. Using the VI has 500 loops, it will begin to add 1 every time to the variable, so in the end, the variable must have a value of 500.

  I tried to make this VI but had trouble with the variables; for example, him setting an initial value. Is there an example in LabVIEW that can help me?

  Looks like a pretty simple VI, but I'm having difficulties.

  Any help would be greatly appreciated.

  Hi penguins,.

  It is here LV8.5...

  It is pretty basic, so you should have a look on the free courses online on the website NOR!

• With CVI SQL Toolkit, how to add the new variable param column in a table.

  Dear all:

  I used the CVI Sql toolkit to create a database, but now I don't know how to add a new column to a table in variable param.

  I know, to add a column with the name of constant column could be down by below:

  DBImmediateSQL ((hdbc, "alter table table1 add column1 char [100]");

  But if Column1 is a param variablae how can I write the code? Please advise?  It will be appreciated if you could give me an example.

  Best regards!

  HI -.

  If you look at the parameters that you pass to the SQL function, you can see that the second parameter is a string constant. In your code, you can create an array of characters (string). You can then use sprintf to programmatically determine what will be the contents of this variable. In the function call, you can put the variable instead of the literal string, and you will have a customizable SQL statement.

  Hope this helps-

  John M

• Add a variable along the withQNetworkRequest

  Hello

  Is it possible to add a variable with the QNetworkRequest and receive this variable with the QNetworkResponse?

  Please help me

  Hello

  Yes, it is possible to transmit all information wrapped in QVariant using setAttribute whose attribute ID from QNetworkRequest::User to QNetworkRequest::UserMax.

  QNetworkRequest request(QUrl(apiURL));
  ...
  int offset = 12345;
  request.setAttribute(QNetworkRequest::User, offset); // primitive types are converted to QVariant automatically
  request.setAttribute(QNetworkRequest::User+1, someOtherVar);
  

  To get it back later:

  void ServerRequestManager::processResponse()
  {
    QNetworkReply *reply = qobject_cast(sender());
  
    int offset = reply->request().attribute(QNetworkRequest::User).toInt();
    ...
  
    reply->deleteLater();
  }
  

  I suggest to declare an enum for the ID attribute in the .h file:

  class ServerRequestManager: public QObject
  {public:  enum
    {
      AttributeOffset = QNetworkRequest::User,
      AttributeVar2,
      AttributeVar3
    };  ...
  };
  

• Add the script variable

  I have a script that will be run 5 different movieclips

  those who will have the names:

  klok1, klok2, klok3, klok4, klok5

  and I have a function called "roteren", which will host the klok1

  to animate the others, I have to copy paste that long script 5 times, once for each movieclip

  is there not a way somehow add a variable to the writing?

  Like this:

  .rotation("kloknr")mc_klok = mc_klok("kloknr").rotation + hair;

  where ("kloknr") would be the variable inserted after the name, so he could say: mc_klok1.rotation or mc_klok2.rotation or mc_klok3.rotation etc.

  How is that possible?

  your code is screwed.  Use the code that I proposed:

  This ["mc_klok" + kloknr] .rotation += hair;

• How can I add session variables for the subject field and the body of the e-mail Message?

  How can I add session variables for the subject field and the body of the e-mail Message? Tried several combinations, but do not seem to correct the syntax.

  This is the code I have. I need to change all the form variables in $msg in session variables. The $to part is supported. What remains are the $subject and $msg fields.

  $à = « à : ». $_SESSION ["toemail"];
  $subject = '$firstname $lastname, your registration details ';
  $from = "from: [email protected]"; "
  $msg = "Dear $title $firstname $lastname\r\n\nThank for the registration for the design of your dream Home.\r\nWe have received this following details details of you-\r\n\nClient-\r\n\nOccupation: $occupation \r\nPhone No.: $phone \r\nE-mail: $email\r\n\nPresent $ location: \r\n location\r\n\nPresent address: \r\n$ address\r\n\n\nFollowing are specified by you - design requirements \r\n\nBasic Features\r\n\nNo." floors: $floors\r\nNo. of bedrooms: bedrooms\r\nNo of $. of bathrooms: $bathrooms\r\nFloor region: $sqft\r\n\nFurther Suggestions: $ Plan\r\n\nSplit one further\r\n\n\nType floor: $splitfloor\r\n-remarks: $splitfloorremarks\r\nOpen floor: $openfloor\r\n-remarks: $openfloorremarks\r\n\n\nList of the rooms to be Included\r\n\nFoyer: $foyer\r\n-remarks: $foyerremarks\r\nDrawing: $drawing\r\n-remarks: $ alive drawingremarks\r\nFormal: $formalliving\r\n-comments : $ alive formallivingremarks\r\nFamily: $familyliving\r\n-remarks: $familylivingremarks\r\nHome Office: $homeoffice\r\n-remarks: $homeofficeremarks\r\nDining: $dining\r\n-remarks: $diningremarks\r\nMaster room: $master\r\n-remarks: $masterremarks\r\nMaster bathroom: $masterbath\r\n-remarks: $masterbathremarks\r\nMaster Dressing: $masterdress\r\n-remarks: $masterdressremarks\r\nBedroom: $bed\r\n-remarks: $bedremarks\r\nBathroom: $bath\r\n-remarks: $bathremarks\r\nDress: $dress\r\n-comments : $dressremarks\r\nStudy: $study\r\n-remarks: $studyremarks\r\nLibrary: $library\r\n-remarks: $libraryremarks\r\nPowder room: $powder\r\n-remarks: $powderremarks\r\nPrayer room: $prayer\r\n-remarks: $prayerremarks\r\nKitchen: $kitchen\r\n-remarks: $kitchenremarks\r\nPantry: $pantry\r\n-remarks: $pantryremarks\r\nUtility/area of work: $utility\r\n-remarks: $utilityremarks\r\nBalcony: $balcony\r\n-remarks: $balconyremarks\r\nStore: $store\r\n-remarks: $storeremarks\r\nLaundry : $laundry\r\n-remarks: $laundryremarks\r\nVeranda: $veranda\r\n-remarks: $verandaremarks\r\nCar porch: $carporch\r\n-remarks: $carporchremarks\r\nGarage: $garage\r\n-remarks: Theater garageremarks\r\nHome $: $theater\r\n-remarks: room of $theaterremarks\r\nMaid: $maid\r\n-remarks: $maidremarks\r\n\nOther general remarks: $general\r\n\nPlease note that the fields have been left blank in your form will be considered undecided details and used in discretion.\r\nIf of the architect , it better to add more later, design requirements please feel free to reply to this email with the details. « ;
  $fla = mail ($to, $subject, $msg, $from);

  Thanks in advance!

  askintrades wrote:

  How can I add session variables for the subject field and the body of the e-mail Message?

  What you want to do? Given the nature of your question, it seems that you probably don't know what a session variable is used. The PHP manual describes the purpose of sessions here: http://docs.php.net/manual/en/intro.session.php.

  I need to change all the form variables in $msg in session variables. The $to part is supported. What remains are the $subject and $msg fields.

  $à = « à : ». $_SESSION ["toemail"];

  Why do you need to change the form variables in session variables? They are already stored in session variables, or they come directly from the form?

  The $to part is not supported. When you pass $to to the mail() function, it should contain only an e-mail address, not a string that begins with "to:

• How to add a variable entry in the Oracle reports (i.e. & T_DATE)

  Hello, all:
  
  Quickly, I'm trying to convert a report of PL/SQL to Oracle 10 g reports in order to obtain better formatting control. I get an error message regarding the & variable T_DATE. I looked in the doc online as to how this is done, nothing will do. Please get an idea as to how to proceed please.
  

  select 
  ALM_OG_ID,
  ALM_OG_ACTIVITY_DATE,
  --ALM_OG_NAME,
  RTRIM(ALM_OG_FIRST_NAME) "FIRST NAME",
  RTRIM(ALM_OG_LAST_NAME) "LAST NAME",
  ALM_OG_CAMPAIGN_CODE, 
  ALM_OG_OTHER_ITEM_CODE_DESC,
  ALM_OG_ACCI_CODE, 
  ALM_OG_TYPE_IND,
  ALM_OG_TOTAL_AMOUNT
  From WSUALUMNI.WSU_ONLINE_GIVING_TABLE
  WHERE to_date(ALM_OG_ACTIVITY_DATE, 'DD-mon-YY')                    >=                       '&v_date'
  ORDER BY  ALM_OG_TYPE_IND, ALM_OG_CAMPAIGN_CODE;

  Use a link instead of a lexical parameter setting. Remove the single quotes and ampersand. Add then two points if the parameter looks like this:

  WHERE to_date(ALM_OG_ACTIVITY_DATE, 'DD-mon-YY')    >=    :v_date
  

  Reports will create the setting use to you when you close the query window. In the navigation of the object, expand data model and user settings to see here. You can change the data type and other properties there.

• How to add more variables to a read/write control?

  

  See how the read/write control is connected to global variables? I want to add more variables, I created the globals (some are listed in the table above), but as you can see that they are not available in the read/write control. How can I add them? I also tried to create a new read/write control, but as you can see that didn't help.

  Any help would be appreciated.

  Hi count3r5tr1ke,

  It seems that you are referencing a particular bitfile in open FPGA reference. I think that even when you save your FPGA VI, VI real time still referencing an older bitfile. Have you tried re - compile and referring to the new bitfile once finished compiling? A sure way to make sure that you have the most up-to-date bitfile is to check the VI option when you right-click on the FPGA Open reference and select Configure the reference open FPGA. When this option is checked, if you make changes to the FPGA code, it will force you to re - compile the FPGA VI before you reference it on the real-time side.

  Best regards,

• change the variables in a smart camera by a remote computer

  Hello

  I have a smart camera NI1722 and I want to change some variables inside the camera by a computer which is connected to the camera.

  Is it possible to change the variables inside the camera from a computer outside? On the computer we program with CVI. We have a RS232 and TCP/IP connection.

  Anybody can help us?

  Thank you

  Oliver

  Hi Oliver,.

  You use a LabVIEW or Vision Builder AI program the smart camera?

  There are several ways to Exchange data between a smart camera and CVI on the host computer.

  The easiest way is probably to use shared variables.

  If you use LabVIEW to program the smart camera, the following article explains how to create and deploy shared on the target variables.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4679

  If you use Vision Builder AI, first connect to the smart camera, then select Tools > Variable Manager...

  Select the tag System Variables, and then click Add to create the variable for the data you want to share. Be sure to select publish it on the network box.

  You can set the value of these variables in Vision Builder, using the step set the Variable, located in the tools palette.

  And a lot of steps allow for use directly in their configuration page, clicking the arrow to the bottom of some digital controls.

  Now, on the side of the CVI, this example shows how to connect, read and write variables that you created on the smart camera.

  https://decibel.NI.com/content/docs/doc-3806

  I hope this helps.

  Best regards

  -Christophe

• Adjust the data in the database with the variables

  Hello

  For my internship, I have an assignment to read and set a database with the variables. This SQL server 2005 database contains variables of a controller. These are read and write variables. The assignment is to display the read variables and the user can adjust the variables of Scripture. The first part was "easy" because the forum contained a lot of examples of this. The second part is more difficult because the forum contains absolutely no example of this. Can I use LabVIEW 2010 and 2011, and also I downloaded the 30 day trial of the database connection tool. If it's useful, I can recommend my company to buy this package. Playback vi makes use of a UDL (Microsoft data link) connection.

  So you guys my question is: is it possible to adjust the specific variables in a database using LabVIEW? And maybe you can give me a little advice on this topic...

  Thanks in advance!

  Roy

  In SQL, the specific data are always selected with the keyword WHERE. In VI to update there is a link for options, you can for example add a constant 'WHERE id = 1457 and measure > 0.54 ".

  You can ofc. also build this chain through controls, settings and other means.

  If you prefer, you can use the Execute Query (under Advanced tab I think) to which you can send the complete query example "TestTable Update set name ="Zeus"where id > 14 and id.<>

  /Y

• Is it possible to rename the variable loop for I?

  I do a lot of work with 2D arrays.  Sometimes, it would be useful when browsing the tables for one of the index named i and the other named j.  Is it possible to change the name of the variable increment other than what actually in another variable?

  Thnaks.

  Hummer1,

  As already said, there is no way to change the image of the final iteration.  However, you can add a description to the wire.  Click with the right button on the wire, then select "Description and Tip", type the name/description you want in the box.  Now you can move your mouse over the wire, and the description will appear in the context-sensitive Help window.  I hope this helps.

  Chris M

• Get popupscreen user input and store it in the variable

  Hello world. I have a screen that is pushed to start the application

  pushScreen (new SPScreen());

  In the constructor of the form, I push an extension of popupscreen in the stack to get an int from the user through TextField amount.

  UiApplication.getUiApplication () .pushGlobalScreen (new SplashScreen(), 1, UiEngine.GLOBAL_SHOW_LOWER);

  In the popuupscreen, I store the entry under int amount;

  public void fieldChanged (field field, int context) {}

  name = nameTxt.getText ();

  quantity = Integer.parseInt (amountTxt.getText ());

  Close();

  }

  };

  Now I want int amount; in my screen to shoot the user supplied value and whenever you click on a button Add the amount in total, each time increasing the total amount.

   

  public static int amount;

  total int = 0;

  ...

  amount

  = OptionScreen.amount;

  Total = total + amount;

  No matter how many times you press the Add button it only changes the total amount. For example, if I enter 6 as the quantity and press the button 3 times I want the total 18 years, but the total is still only 6.

  I'm sure there's probably a way to pass a reference to the variable, but I have a similar situation where I have a variable which is accessible by a certain screens and can be changed in multiple screens as well.  I delcare a class called globalVars and put the variable.

  public class globalVars {
  
      public static int total;
  
  }
  

  Do only access you anywhere with globalVars.total.

  Kind regards

  Scott

• Reg exp to divide the values of the variables

  Hello all, I use Oracle 11.2 of SOE, the value of the variable C is: numberA:numberB for example, C: = ' 1 B: 5 A: 12 has: B: 43 3A ", I have divided than the values of two Variables A and B with the letters of withdrawal and replacement of: for the comma. Namely, the value of each would be: is: 5,12,43 B is: 1.3 someone could help to come up with the correct Exp Reg for this task. Thanks in advance.

  Here's a way (like SQL or PL/SQL):

  with t (Spercu))
  Select "1 B: 5 A: 12 A: B: 43 3A ' double
  )
  Select Spercu
  , regexp_replace (regexp_replace (regexp_replace(strC||':','\d+B:'),' A:$ '), ':', ',') as strA
  , regexp_replace (regexp_replace (regexp_replace(strC||':','\d+A:'),' B:$ '), 'B:', ',') as strB
  ;

  SPERCU STRA, STRB
  ---------------- -------- ------
  1 B: 5 A: 12 A: B: 43 3A 1.3 5,12,43

  or

  declare
  varA varchar2 (30);
  varB varchar2 (30);
  varC varchar2 (30): = ' 1 B: 5 A: 12 A: B: 43 3A;
  Start
  varA: = regexp_replace (regexp_replace (regexp_replace(varC||':','\d+B:'),' A:$ '), ':', ',');
  varB: = regexp_replace (regexp_replace (regexp_replace(varC||':','\d+A:'),' B:$ '), 'B:', ',');
  dbms_output.put_line (Vara);
  dbms_output.put_line (varB);
  end;
  anonymous block filled
  5,12,43
  1, 3

  Replace it after you add a trailing colon varC, Interior removes all the ' nB: "Vara and all the" nA: "from varB. The Middle replace deletes the pair of colon final letter, and replace external converts the other pairs of commas leter-colon.

  Kind regards
  Bob