Unit with several banks of messages?

Similar Questions

• How can I close Firefox with several tabs without message

  It drives me crazy. I'm using Firefox on Linux Mint 17 40.0.3 to the top of a tower Dell Latitude I5. If I have more than one tab open and try to close it, I get a message:

  Do you want Firefox to save your tabs for the next time, it opens?

  I click on "Do not ask next time" and "exit". He does not save this preference.

  So I did some research, went up to about: config and change the following parameters to false:

  browser.tabs.closeWindowWithLastTab; false
  browser.tabs.warnOnClose; false
  browser.tabs.warnOnCloseOtherTabs; false
  browser.tabs.warnOnOpen; false

  but this message still comes up. Is this a bug or a feature? How can I get this preference to stay?

  Thanks in advance.

  If browser.showQuitWarning is set to true, you will get this warning message.
  You must toggle the pref to false with a double click to disable this warning.

• Carpet * a DVD-Ram UJ - 841S comes with several error messages

  My laptop is relatively new, I've been burning some video files in DVD - RW and all of a sudden my DVD drive has stopped working. It came with several error messages format "failed due to damage media", "format failed due to general failure" and "the inserted disc is READ only".

  I also can't rip music discs.

  Can you see ODD listed in Device Manager, and if so what is the exact status it?

  Sorry, but we discus on ODD, but nobody knows what model of laptop you have and what is the history of this problem. Is replaced the drive? Why are you sure that you are using compatible with your laptop ODD.

  Please more information!

• The mid-2010 iMac with 4 bank going down. I have 12 Kingston SODIMM KTA-MB1333 / 4G.

  I have 12 Kingston SODIMM KTA-MB1333 / 4G.
  Checked with Memtest 86 any single bank, without problem.configuratio

  The mid-2010 iMac with 4 bank going down.
  Any other configuration with 3 Bank work perfectly.

  < post branched out by host >

  Forget the RAM Kingston and return it for a full refund, if you can.

  Spec'd correct., tested and reliable Mac RAM DO can be bought online Mac RAM sources Crucial memory, directly from the site Crucial (crucial.com) or OWC (macsales.com).

  Already mentioned several times in this post of the thread.

  Any other RAM from other sources and manufacturers (except OWC or Crucial) is questionable, at best.

  Good luck!

• Closure of a state machine in queue event with several parallel loops

  I am trying to find the best way to stop a program that consists of an architecture of State machine in line waiting for event with several parallel loops. Can anyone recommend the best way to achieve this in my attached VI? (To browse the forum, this seems to be a frequently asked question, but I have not found a solution that works for me.)

  I look forward to any comments on my as well code, if someone is willing to offer it.

  My program needs:

  If the user press the 'Stop' button, the program should prompt the user with "are you sure you want to stop the program?" and then return to a State of rest or move forward to stop the program. In addition if there is an error, the program should prompt the user to ' clear the error and continue, or stop the program. Then back to the idle state or move forward to stop the program.

  Architectural details:

  The program consists of 3 parallel loops: (1) a loop of event management that places different States of a queue of the State, (2) a State Machine that enters the State that is removed from the queue of the State and (3) a loop error/Shutdown, which deals with errors in the error queue management.

  During normal shutdown, where running handling loop in the case of event 'Program.Shutdown' and 'Shutdown' and the 'Idle' States are added to the queue of the State. In the state machine, the State of 'Stop' is invoked. Special "5000" error code is added to the queue of the error. In the loop of error handling and stopping, "5000" error triggered a prompt that asks the user if they want to stop the program. If the user chooses not to stop, a notifier StopNotif is sent to the State of 'Stop' and 'Program.Shutdown' event case with notification 'Go '. If the user decides to stop, the Notifier sends the notification "Stop". Loop and event management State Machine ends when they receive the notification "Stop".

  In case of error, the program behaves in the same way: If the user chooses to clear the error and continue, the program returns to the status "pending".

  HOWEVER - if the user chooses to stop the program, the program crashes. The author of the notification that is sent to stop the loop of events and State Machine management cannot be read because event Program.Shutdown and the stop State (which contain the function "Waiting to notify") are not active.

  I was able to activate the stop State by Queuing in the loop of error/Shutdown management. But I don't know how to activate the "Program.Shutdown" event by program and thus access the function "Waiting to notify" inside.

  I tried to put the function "Waiting to notify" outside the structure of the event, so the event-handling loop never ends. Placing timeouts on the "wait for declaring" and the structure of the event makes the programme of work, but I want to avoid using timeouts because I don't want to turn my event program into a program of polling stations. I would also avoid using variables or nodes property to stop loops, because that requires the creation of a control/indicator for something that the user does not need to interact with.

  Thank you!

  First of all, close the notifier outside loops with your queues.  Second, you must use a user event to send the message to the event structure loop so that it stop in the case of the stop on an error.

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• a yellow triangle with a critical problem message, windows vista does not load on a computer laptop dell studio

  Vista Windows failed to load on a dell studio laptop, the message appears with the critical error message, but then the screen turns white after auto restart, no loading of windows. What can I do

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

  Try the above balance sheet of Dell Diagnostics, using F12 to start this process.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• replace 300 watt POWER of ML330 G3 unit with power supply 600wattage is this possible?

  Hi guys,.

  If I could replace 300 watt POWER of ML330 G3 unit with power supply 600wattage is this possible? Is this possible? Please notify

  Hi Big_Dave

  Thank you for your continued support...

  Now, I replaced the in situ 300 watt power supply provided with the HP ML330 G3 with 750 watt Corsair and well. No smoke or fire smelly so that chips and salmon "I am preparing for dinner.

  Regarding your question, Yes, the size of floppy Bay is the same size as that of rpm scsi 10 k 80pin. drive it is a 80-68 pin code converter that plugs nicely into the internal water of 68 pin male. Corsair 750w PSU comes with connectors 8 x 12v morlex, these can be connected to the connectors extra 12v adapter needed to put these converters to 68pin 80 - scsi

  Daisy chaining scsi disk is easy, the two external channels can be used to connect to the scsi drive more in an another case unithaving / chasy a total of 28 scsi disk Garland.

  Everything is settled now, my only question now is to do with knowing how to configure RAID correctly and this constant warning about Battery Backed Write cache messages' on the smart card array 6400 however I'ld who post on another section of this forum. This can now be closed according to the original question with replacement of the power supply to a power greater.

• Dynamic region with several task page fragment flow isn't refreshing VO

  JDeveloper version is 12.1.3 and Weblogic Server is 12.1.3.

  We have a dynamic region with several task page fragment flow.  We have created a menu that will open on the workflow task in the dynamic region. Before defining the workflow id in the bean, we execute query on the original Version after setting the bind variable. When we click on the menu is open the flow of relevant tasks in the region and showing the Original data table.

  But when we open the same request again to a different browser session, it shows all the data in the original Version when the user clicks on the relevant menu item...

  I have attached the code used to navigate to the different workflow tasks written in the bean from the back of the home page.

  We have no idea why anyone what happens, if it's a server problem or a code issue. Because unless and until we open the target application in a new browser it works fine.

  We tried and deployed on a remote server as well, but it gives the same question...

  Would be really grateful for the help...

  The user, the code you posted has some serious problems. Never, I repeat never store a reference to an application module in a static variable in a bean. That is why you see only data once. After that, the second session reuses the application module from the first to the configuration data, but to display data it uses a module different application.

  The way you try to configuration data is too bad. You must pass the parameters to the workflow and init data in the default action of the workflow instead of doing before installing the new workflow id. A workflow is a unit of work that is kind of a black box. You may not assume that the stuff you do outside of this black box can be seen inside the box. This is only true if the workflow share the same control of data as it's parent (share of data control).

  I suggest you read some documents on the workflow and how they work. A good start is to look at this video https://www.youtube.com/watch?v=A3CmDhWHaG0

  or work through this tutorial 12 c (12.1.3) Oracle JDeveloper tutorials - working with bounded task flows, regions and routers

  Timo

• How to subtract a grunge texture of a layer with several objects?

  Hi all

  I've been struggling with this for hours. Would be very grateful for help.

  I'm trying to apply a vintage texture to some vector illustrations.

  In the screenshot, the work I created is in the layer of "work." I tried to simplify the work as much as possible by using the union, merge, expand, etc. I wanted to do a piece of work, but that seems so simple that I can get it.

  When I try to perform a subtraction on the layer 'work' with the layer of 'texture', basically everything disappears.

  I suspect that it does not work as expected because the layer of my work is always composed of several objects and not a unified object.

  Vintage texture superimposed on the work looks good, but I need this subtraction in vector because I intend to get it printed on a shirt in one color, so I can't get the holes filled with color.

  Any help would be greatly appreciated.

  Thank you!

  Ray

  

  How can I activate art in a single compound path?

  First of all, to unite all paths with the first button in the Pathfinder palette. Then choose object > compound path > make (or press Command-8).

  But don't do it this way. Use an opacity mask.

  If I use the grunge texture as an opacity mask, do I still to transform the art into a single compound path first or I can do to a layer with several objects as if it were now?

  No, you have not; You can keep a complete editibility of your design. You need to just design group firstly, why the opacity mask applies to all this.

  Opacity masks are easier to use if you uncheck "Clip" after their creation. Then, all parts of the mask that is black will be transparent; each part that is white will be opaque, and the things which are shades of gray will be partially transparent. Just like in Photoshop. Right now, your grunge texture is white, so you would need to change to black after making your opacity mask.

• I've just updated to Photoshop, CC 2015.0.1, and I can't do 'Quick export in PNG' with several plans to work more? Any ideas?

  Update Photoshop CC 2015.0.1, I can do is no longer the 'Quick export in PNG' with several work plans more.

  I currently work with about 10 + work plans and I normally ' file > export > rapid export in PNG ", I had no problem in the previous version of Photoshop, but since I updated yesterday to the latest version, is no longer shows the pop-up asking where I want to save the png and instead" does nothing?

  Any ideas?

  Thank you

  Rob

  Please try and reset the default Photoshop preferences, if you do not customize your Photoshop after the last update.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Error with several owners user ID: ImageFrame owned bt PagePageItem and BaseLink

  After you install the update of Muse, I run my site work active and immediately saved the file. But I get the error message: uid with several owners: ImageFrame owned bt PagePageItem and BaseLink. And the program of the muse stops.

  Anyone know what it is.

  There is a problem in the original .muse file. Muse made a diagnosis of the State of the file in the framework of Save as. That check detects a problem that unfortunately requires that we take a closer look and the manual of repair by cracking open the file. (You will get a similar error if you had made a save as in the previous version.)

  Please send us the .muse file at [email protected] as well as a link to this topic. If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (if you use a service, please include your email address in the body of the message back, given that not all services to include it in the invite sharing they send.)

• Payment of employees in several banking institutions

  Hello
  
  There is an obligation to pay each employee by several banking institutions
  
  Employee A, all refunds as travel allowance and travel allowance should go to Bank X and we should be able to pay this income thorugh Express on adhoc.
  For the same employee the normal salary should go to Bank Y via a monthly treatment.
  
  Can achieve us in R12.1.2? All suggestions will be useful.
  
  Kind regards
  Saurabh

  Dear Saurabh

  You must add in the method of payment personal FDF a segment to identify the mode of payment of refunds.

  each employee would be a payroll as EFT Bank transfer payment method.
  and a second mode of payment of refund as the credit card PayPal, found on the FDF for reimbursement.

  before you run the quick compensation, a batch program updates 1 priority of payment with FDF = refund methods.

  before running the list of regular pay, the same batch program updates 1 priority of payment with FDF = payroll methods.

  hope this clarify

  concerning
  Giuseppe

• Shortcut for the new window with several tabs

  Is it possible to have a shortcut on the desktop to launch a new window with several tabs? For example - home page is set to "www.google.com", but the shortcut opens new window with tabs "www.cnn.com" and "www.youtube.com".

  Then far,.../firefox.exe-nouveau-fenetre followed by the two URL in quotes will open two new windows. Entry - new-window "www.cnn.com" - new-tab 'www.youtube.com' will open two new windows if no instance of firefox is open, but if another window is already open, youtube will add a tab to the already open window, rather than the new window with cnn.com

  In reply to myself... withdrawal-order new window (and-new-tab), now it works.

  Looks like I'm too complicated it.

  shortened final was "C:\Program Files (x 86) \Mozilla ' 'url1'"url2.

• Mozilla will not dialogue with my Bank even if ABP is disabled

  Firefox won't chat with my Bank, although ABP is disabled.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.