added the second HD for Inspiron 537

Similar Questions

• Recommendation of the graphics card for Inspiron 537

  So sorry to bother you, but I was not able to reach my people in service at Dell. As indicated, I own an Inspiron 537 desktop computer. It came with an Intel processor, which, I understand that Intel, was published by Dell before my purchase. It is for this reason that they honour not any guarantees, etc..  Anyway, I need a new graphics card, a strong enough for me to run Cinema 4 d (currently Cup when I go on several screens), and not too much that it would burn my disc.

  Thank you for your help in this matter.

  I agree on the HD 6670 being on the best choice, but make sure that you get with memory DDR5, DDR3... it will make the difference in speed of 3D rendering.  example: www.newegg.com/.../Product.aspx

• HP Pavilion 510n - adding the Second hard drive?

  A few questions...

  1. is there a size limit for any player second, I would like to add?

  2. What is the procedure for adding the second disc?

  -J' added a second drive to an OLD pc before and it involved linking the second slot on an IDE cable, change the jumper on the slave drive settings, and modify the bios settings... it would be similar?

  Hello TSobiech, it is always best to ask to order a part that is not compatible with a certain system.

  The hard disk that you show the link should work perfectly. Even if it's an ATA100, and your system supports ATA33/66, this disc should still work but will be downclocked to ATA66 speed.

  Here is another link to a 250 GB IDE HDD if you might be interested.

  You won't notice much, if any, degradation in performance to the difference in speed. These IDE drives are higher than the price a SATA with the same capacity, but they are becoming harder to find.

  Since you want to be using as operating in car system, but just a backup drive, they want to make a difference.

  If you want to make use of the full speed of ATA100, you could add a map of IDE controller supporting ATA100, but I really don't think it would.

  Since you mentioned the intermediate layer of IDE as not being used, you can connect the new drive to this connector.

  Now, there are a few things that you should check that you install the new hard drive. These are the connectors of jumper on hard drives.

  This is the very small plastic with metal inserts, at the end of the hard drive where are the other connectors.

  I always use the CSEL (CS) on two hard drives. Readers may already have jumpers to this setting (jumpers connection), but if not, you must set two hard drives the selection of cables (CS).

  Since the current IDE hard drive is the boot hard drive and an ATA66, it must be connected to thin ribbon cable connector, as it is now, and the new hard drive attached to the middle connector IDE. The slowest speed of the two hard drives will result in two hard drives running at the slower of the two speeds. It will work very well.

  You need to partition and format the new hard disk before it can be used. This can be done from Windows if necessary.

  I hope this helps.

• HP 8630 will authorize specifying the second tray for printing shortcut.

  All-in-one printer inkjet HP 8630 range Pro will not accept specifying the second tray for printing shortcut. Indicates that the parameter is a conflict and obliges the "Printer Auto Select" option instead of allowing me to select "tray 2" which is an option. I like to keep a white shining in tray one and photo paper in tray 2 and made the my HP 8500 Pro for everything that I needed to do is select the appropriate shortcut configured by me to print the photo. Operating system is windows XP Pro.

  I want to start by apologizing for not picking up on this on your first post. The 8630 2nd tray print 8.5 x 11 or 8.5x14 paper.

  The reason why what impression pictures he says that there is a conflict and if he chooses the main tray is because there is no choice. The printer does not have the ability to print photos from the 2nd drawer. If you're looking to load media into the trays you need 8.5x11 or 8.5x14 in the 2nd tray and other media can be loaded in the main tray.

  In the printer's Specifications in paper output specifications > paper tray capacity & Supported sizes of paper in you shows what's available for trays.

  Change the source of your document must make all the problems disappear.

  Kind regards

• The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  Hi Sarma_RN,

  1. When you receive the error message?

  2. update you are trying to install?

  3. When was the last time you were able to install updates?

  If Windows Update, error 80072ee2 during updates, the Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for automatic update of Windows run at its next scheduled time.

  These errors can occur caused by one of the following problems:

  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Strong Internet activity
  • Recoverable database errors

  See the Microsoft article and try the steps mentioned below.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• losing audio after adding the second screen

  Why am I losing my sound after having added the second screen (sony sdm-hs95)?

  My customized HP ENVY 17 t-j100 Quad Edition Notebook PC includes:

  • • Windows 8.1 64 Pro
  • • 4th generation Intel® Core™ i7-4800MQ processor
  • • Included 2-year warranty
  • • NVIDIA GeForce GT M 740 graphics with 2048 MB of video memory dedicated
  • • 17.3 inch diagonal Full HD LED-backlit Display (1920 x 1080) anti-glare Non touch
  • • 8GB DDR3 System Memory (2 Dimm)
  • • 2 TB 5400 RPM hard drive
  • • 24GB flash acceleration Cache hard drive
  • • Two batteries of Lithium-Ion 6-cell
  • • Blu - ray player & SuperMulti DVD burner
  • Backlit keyboard •
  • • HP TrueVision Webcam high definition with digital microphone built-in
  • • 2 x 2 802.11b/g/n WLAN and Bluetooth® [2 x 2]

  Thank you

  Hello

  How do you connect the second screen? Using HDMI? If so, please disable the sound HDMI playback devices

  Right click on the speaker icon > playback devices select > right click HDMI Audio then turn it off

  Kind regards.

• What's the use of the second available for Captivate perpetual licenses right?

  What's the use of the second available for Captivate perpetual licenses right?

  If you ask if the software can be installed and enabled on both machines, yes it can.

• by selecting the second result for each client...

  Hello
  
  I have a table that contains all the contacts that we have with our customers.
  We consider a file active file from the moment where there was 2 contacts for this customer.
  Today someone asked me "can you tell me how many new customers with an active file, we have this year."
  
  So what I really want to do now is make a view that contains the DATE of the SECOND CONTACT for each CLIENT_ID.
  
  the table looks like this:
  CONTACT_ID
  CLIENT_ID
  DATE
  CONTACT_FORM (any in this story)
  REMARKS (any in this story)
  
  Can someone help me with this please?
  
  Thanks in advance for your answers.
  
  L
  
  change I don't know how to make an opinion, which is not the problem :) in this case only the query select to make the problem there.
  
  Edit 2 I made a small example
  
  If I start with the data in this table:

  CLIENT_ID || DATE           .... other columns here...
  436     || 01-02-2011
  328     || 05-04-2011
  319     || 13-01-2011
  220     || 03-09-2011
  319     || 17-12-2011
  220     || 25-11-2011
  436     || 01-04-2011
  436     || 01-04-2011

  that vision must end up with:

  CLIENT_ID  || DATE_OF_SECOND_CONTACT
  436     || 01-04-2011
  220     || 25-11-2011
  319     || 17-12-2011

  (works with version 11.2.0.1.0)
  
  Published by: 901981 on 13-dec-2011 02:16

  If you do something like

  SELECT CLIENT_ID, date_column
  FROM (
  SELECT client_id, date_column, row_number() over (partition by client_id order by date_column asc) AS CONTACT
  FROM YOUR_TABLE)
  where contact = 2
  /
  

  HTH

  Roger

  Published by: Roger on December 13, 2011 02:19

• Video for Inspiron 537 running Vista Home Premium SP1 64-bit, Pentium dual core E5200

  Looking for a video card decent for an Inspiron 537 dinosaur for the kids to play with. I need one that's PCIe x 16, with up to 1 GB of video memory. Any Suggestions?

  ASUS EAH 6450

  http://www.Newegg.com/product/product.aspx?item=N82E16814121439

• Adding 2nd hard drive for Inspiron 530

  I have a Dell Inspiron 530 which has a Samsung 320 hard drive.  I would like to add a second hard drive to put photos, etc.  Green a Western Digital 2 TB 3.5 "SATA looks like a possibility.  However, images, like most of the internal drives I saw pictures, he has one open side showing the drive mechanism.  The Samsung already in the PC is covered.  The additional disc will not become covered with dust (my PC had a lot of cobwebs in it when I opened it to the top!)?  Any advice on which drive to choose and how to install it would also be appreciated.

  dellby

  All computers must be inside the frame, cleaned all the dust on a regular basis.

  I have two HD SATA and SSD installed in my Inspiron 530 mini tour and have never had a problem of "dust."

  Keep the air intakes located on the façade behind the clean HD of any accumulation of dust, helps to cool the hard drives.

  Instructions for the installation of a second hard drive physically in a 530 are here:

  FTP://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/Inspiron-530_owner%27s%20manual_en-us.PDF

  Will need you a SATA data cable, there should be a spare power connector SATA inside the case and four 6-32 X 1/4, Phillips head screws to mount the drive.

  Connect the SATA data cable to the SATA connector on the motherboard.

  After you have installed the drive, enter the system setup and make sure the hard drive is "on" [We] and recognized.

  For windows to recognize the second hard drive, it must be partitioned and formatted.

  Go to control panel, administrative tools, computer management, storage, disk management, right click on the new drive, select format, then you can assign a drive letter.

  Hard drives Western Digital and Seagate are good, my preference is for Western Digital.

  Also check the length of the manufacturer's warranty, plus the best guarantee.

  Bev.

• Added the second monitor, but can't put in place - no themes & seemingly in Control Panel

  I added a second monitor, but have no appearances & themes or display icon in the control panel. How can I configure it as a second screen?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  It will be useful.

• CMS OVA, adding the second NETWORK card breaks the first NETWORK card

  I'm testing CMS 2.0 and when I try to add a second NETWORK card in VMware, he immediately interrupts the first network card.  As soon as the loading of the image, the first NIC fails.  Even if I disable iface b, it will allow all traffic where iface one.  If I stop the application, remove the NETWORK adapter and run it back again, it works very well to the iface one.

  I want to test the public face with box feature, but I can't if I can't add a second network card.

  How do you add the second network interface and interface you add?

  You should add 'VMXNET3' type if you use VMWare, if you chose something else, you invalidate your license, see section 3.3 of the virtualized CMS 2.0 Setup Guide for deployments.

  If you need assistance, you must move this thread to the section of telepresence of forums, where this device is actively discussed.  You can change your question and change the categories at the bottom of the page.

• How to change the second destination for imported files?

  sstarting with 4 LR, I used a second destination to backup my files during import.  All in the middle of life 5 LR, the second destination suffered a catastrophic failure, and I replaced the drive with a large SSD.  To distinguish it from other readers, I always add SSD like the tail of a drive name to distinguish regular readers or raid arrays.  In all cases, the change of name of the new command meant that I had to change the name of destination for the second copy of the imported files.  I looked high and low by books and textbooks online and could never find the location for a modifiable version of the location of the second drive.  I faced the same problem in 6, which seems to work like 5 in this field.  It should be drop-dead simple and obvious, but I sure can't find.  I can get the full panel which should allow me to change the locations, but nothing in the Panel seems editable, clickable, except the main destination.

  can someone explain the secret formula of decoder for it.  Right now I'm reduced to a script Automator that backup the Lightroom photo by car to the second destination using carbon copy more closely, but it seems Aussie an inefficient use of resources.

  Thanks for your help.

  cause, it was a mistake to 02:00 my time and I didn't know that I had done.

• Add the 2nd drive for Inspiron 6400

  I would like to know if I can add an internal HARD drive is more for Inspiron 6400...

  As it is has no slots vacent, I am ready to exchange the CD-DVD player

  
  

• hang the second monitor for slimline t3600

  Hello

  I am trying to connect the second monitor and upgrade to 3 GB RAM to 4 GB.

  Please let me know what King of the video card and the RAM will be I need?

  Thank you

  Here are the details of my pc.

  HP Pavilion Slimline s3600t PC
  -Genuine Windows 7
  -Processor of Intel (r) Core 2 Duo E4700 (2.6 GHz)
  -3 GB DDR2 800 MHz SDRAM (1 x 2048, 1 x 1024)
  -Integrated graphics (NVIDIA GeForce 7100), VGA
  -Hard drive 500 GB 7200 RPM SATA 3 Gb/s
  -Card G wireless LAN
  -LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  -output port headset 15-in-1 memory card reader, USB 2.
  -No TV Tuner w/remote control
  -Integrated 5.1 audio channels with front audio ports

  Here are the specifications of your HP Pavilion Slimline s3600t desktop. According to specifications, your system has a 180 Watt power supply. This power is very unlikely to support a low profile retail graphics card. You can buy a card personalized with reduced HP power but it is very expensive. This leaves the eVGA USB - VGA adapter. About $ 40 - $50, it's a bargain compared to your other choices.

  Frank