HP 8630 will authorize specifying the second tray for printing shortcut.

Similar Questions

• HP will not provide the part number for print head?

  I get very annoyed at the phone support and HP website.

  I want just the part number HP for printing to the printer HP Officejet 6000 (CB051A) heads!

  We have more than 25 of this model and they are very reliable, but the heads begin to go - that's the ONLY problem. Throw away them in order to print heads, considering that you can always get pieces of plastic for the things would be ridiculous, not to mention very pollutants.

  Please could someone tell me the part number or HP, why these printers are so reubbish we should bin them and buy the equivalent which is identical but with slightly different rooms which means that all current stocks of ink is to go to the dump!

  DO NOT SEND ME ON SOME WEBSITE "PARTSURFER' '-J' I TRAWED ALL HP WEBSITES!

  Simon

  Hello

  Please visit the following link:

  http://www.Amazon.com/genuine-HP-printhead-OfficeJet-printer/DP/B0041969Z6

  I hope this helps.

• HP dv7 will not recognize the second hard drive

  My HP dv7-2185dx running Windows 7 will not recognize the second hard drive, bios recognizes this Intel Rapid storage acknowledges.

  Main hard drive is a 1 to install a second hard drive to 500 GB.

  Hello

  Try the following.

  Judgment of the laptop and unplug the 2nd HARD drive.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  When this is finished, stop the laptop.

  Reconnect the 2nd HARD drive, then start Notepad and let Windows take over completely for a few minutes before checking if the reader appears in the lower part of the disk management window.

  Kind regards

  DP - K

• Premiere Pro CC 2015 will install on my second computer for backup.

  Premiere Pro CC 2015 will install on my second computer for backup. The Application Manager lists only the first CS6 in option, which takes 20 seconds to download and finishes (obviously not the program).  This is a reformatted machine and a brand new facility - no previous version is still on the machine.  Literally, the CC was the 2nd application installed.  I managed to install other applications CC 2015 - Photoshop, InDesign, Lightroom, etc.  I have the full CC license and have installed Premiere Pro CC 2015 on my main machine.  Any help would be appreciated!

  Have you checked the first Pro CC 2015 requirements to see if your computer meets them?  If your sytem was short somehow the Desktop Manager it will list not by download.

  Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

• How can you specify the default value for the undefined array elements

  According to aid LV, the tables have two default values, the normal default value and the default value for the undefined array elements.

  I assume that there must be a way to specify the default value for later, but I can't find it anywhere.  Any ideas?

  I know that you can drag the item out of the table container.  Change the default value on this scalar element.  Then drag the item in table tank.

• Select tray 2 as the main tray for all functions

  I use the top tray for odd size media and want to set the lower plate (#2) in the Lac main for all functions presented. How this is done on my Officejet Pro 8600 Premium?

  Hello

  This can be done in the control panel of the printer and printing software

  To set up the trays

  in your PC

  1. you must select the option Auto tray in the printer software. If the printer is on a network

  and you set a default bin, the setting affects all users of the printer.

  On your printer

  1. make sure that the printer is turned on.
  2. tap (right arrow), press Setup, tap preferences and then select default
  Tray or tray Lock.
  3. click on OK or apply after changing settings of the desired tray.

  Above measures avaialbe in the manual, please see page 32 in http://h10032.www1.hp.com/ctg/Manual/c03026243.pdf

  Good impression

• Windows7 will not accept the product key for activation

  Windows7 will not accept the product key for activation after a clean reinstall of the o/S.i. to pass messages to the effect that the product id is not valid for activation, even if it's the OEM product key. Enter the key manually and the telephone audit failed. Any ideas?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• What's the use of the second available for Captivate perpetual licenses right?

  What's the use of the second available for Captivate perpetual licenses right?

  If you ask if the software can be installed and enabled on both machines, yes it can.

• by selecting the second result for each client...

  Hello
  
  I have a table that contains all the contacts that we have with our customers.
  We consider a file active file from the moment where there was 2 contacts for this customer.
  Today someone asked me "can you tell me how many new customers with an active file, we have this year."
  
  So what I really want to do now is make a view that contains the DATE of the SECOND CONTACT for each CLIENT_ID.
  
  the table looks like this:
  CONTACT_ID
  CLIENT_ID
  DATE
  CONTACT_FORM (any in this story)
  REMARKS (any in this story)
  
  Can someone help me with this please?
  
  Thanks in advance for your answers.
  
  L
  
  change I don't know how to make an opinion, which is not the problem :) in this case only the query select to make the problem there.
  
  Edit 2 I made a small example
  
  If I start with the data in this table:

  CLIENT_ID || DATE           .... other columns here...
  436     || 01-02-2011
  328     || 05-04-2011
  319     || 13-01-2011
  220     || 03-09-2011
  319     || 17-12-2011
  220     || 25-11-2011
  436     || 01-04-2011
  436     || 01-04-2011

  that vision must end up with:

  CLIENT_ID  || DATE_OF_SECOND_CONTACT
  436     || 01-04-2011
  220     || 25-11-2011
  319     || 17-12-2011

  (works with version 11.2.0.1.0)
  
  Published by: 901981 on 13-dec-2011 02:16

  If you do something like

  SELECT CLIENT_ID, date_column
  FROM (
  SELECT client_id, date_column, row_number() over (partition by client_id order by date_column asc) AS CONTACT
  FROM YOUR_TABLE)
  where contact = 2
  /
  

  HTH

  Roger

  Published by: Roger on December 13, 2011 02:19

• Changing the default settings for printing in Office Picture Manager

  Anyone know how to change the default setting for printing in Office Picture Manager?

  I have a user who clams that when they try photo printing settings in Office Picture Manager has been configured to print bac2 and paper 4 x 6.  Now when it prints, it must use the drop-down list boxes to tell it to print from bac2 and paper 4 x 6.
  I changed the default settings of the printer to print from the bac2 and use paper 4 x 6, but they must still use the drop-down list boxes in Picture Manager.
  Thank you!

  Although I maded the changes to the properties of the Windows printer I had to do that to solve the problem.

  To solve the problem:

  1. once in the print of the image window there is a link 'Options '.... "at the bottom right.

  2. once it's a click a print settings window that opens there. You will need to click on the link 'printer properties '.

  3. now the printer Document Properties window appears. Change of Source paper and media here.

  4. click on the OK button and now it's good to go.

• How can I access the album artwork for printing. It is used to be simple, that now I can not find anything

  How can I access the album artwork for printing on a CD? It is used to be simple, that now I can not find anything

  (Retina Powerbook 15, OSX 10.11.2, Itunes 12.3 2.35)

  Right-click on the right track... Get info... Select album art... Drag it to the desktop

  print it from there.

• When I press the END/PRTSC for print screen button, nothing happens.

  original title: END/PRTSC Key

  When I press the END/PRTSC for print screen button, nothing happens.  How can I print screen on my new laptop computer?

  Using the PrtScr button takes a screenshot and put it in your Clipboard. You must then use another program (e.g. Windows 7 Paint) and paste so that it becomes a new image which you can then manipulate or print.

  "Print Screen" is a misnomer.

• First Pro CC will not recognize the second monitor

  Greetings:

  I'm having a problem with the help of my second monitor to the output in CC PP.  I did the following based on another post:

  Try these two steps to check the transmission is enabled:

  1. go in the program monitor Panel menu > check "Allow to pass" is checked.

  2. go to Preferences > reading > check your 2nd monitor is present and active.

  What I get when I do it is a black screen that covers the top left of my screen at 1920 x 1080, the size of my other monitor.  When I save a project and use my second monitor for a sign, say under my belt, I'm able to drag the Panel above and use it, but when I save and reboot, the Panel is always on my primary monitor:

  Model name: iMac

  Model identifier: iMac13, 2

  Processor name: Intel Core i5

  Processor speed: 3.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 32 GB

  Boot ROM version: IM131.010A.B05

  Version of the SCM (System): 2.11f14

  NVIDIA GeForce GTX 675MX:

  Chipset model: NVIDIA GeForce GTX 675MX

  Type: GPU

  Bus: PCIe

  The PCIe track width: x 16

  VRAM (Total): 1024 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0x11a2

  Revision ID: 0x00a2

  ROM revision: 3707

  Exhibition:

  iMac:

  Display type: LCD

  Resolution: 2560 x 1440

  Per pixel: 32-bit color (ARGB8888)

  Main screen: Yes

  Mirror: Off

  Online: Yes

  Integrated: Yes

  VP2365WB:

  Resolution: 1920 x 1080 @ 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: RDC104500162

  Mirror: Off

  Online: Yes

  Rotation: support

  I tried different confgurations in Preferences-> reading, but get the same result every time.  I have to force quit when I get the black box, I'm unable to access other options of PP.  Anyone encountered this, and if so, is there a solution?  I saw that there was a problem of "transmit", but that does not solve this problem.  Thank you!

  I don't hate replying to my own post, but I thought I'd post here how I solved my problem in case someone else ends up here with a similar one.

  To be clear, I have 2 monitors and when I activated transmit full playback screen would be superimposed on my workspace creation on monitor 1 even though I had specified to monitor 2 in my video device in the preferences > reading.

  It seems that during the last few months (I have a vague memory of it), I decided to check the "improvements" in the way Mavericks managed multiple monitors. I created two spaces in Mission Control, this is how Applications in the dock wins a menu extended options in the menu contextual (the one that appears when your right click the application icon in the dock). I knew that this extended menu was there because the site of Apple told me.

  From the OPTIONS menu on my 2 monitor setup are then ASSIGN to > all workstations; OFFICE ON DISPLAY 1; OFFICE ON DISPLAY 2; NONE.

  After trying the various options to see if the operation was consistent with the explanation of Apple and if I wanted to work with spaces, I decided that I don't have not so I removed the spaces that I created in Mission Control.

  Remove the deleted spaces these additional options ASSIGN to THE menu even though I wasn't aware of this at the time.

  A few days later, I went to allow the TRANSMISSION when editing in Premiere Pro (that I had used successfully before) than having the problem described in this thread. I stupidly credited this problem for a recent update of CC and in the release of 2014 CC does not correct it, I started to look elsewhere.

  Cut to the end and the way - after proving that a new Mac user account test does not show the problem, I have returned to my user account, active areas in control from Misson, changed the menu ATTRIBUTE to None for Premiere Pro (default), then the TRANSMISSION function worked correctly, showing a full picture has been assigned to the correct window.

  OK, the last paragraph may suggest I knew what to do but I have not, I had spent a lot to research in the library of the user to search for differences, until I came across this.

• New installation of Windows 7 will not identify the second internal hard drive

  Attempted recently to upgrade a computer running the SP3 of XP to Windows 7.  Bought the new FULL version of 7.
  Have two 1 t Seagate Barracuda SATA drives on board; Operating system in partition 1 of disk C:. second disc to store data only.

  Several unsuccessful attempts to install 7, but with helpful suggestions, others on this forum, (i.e., update of the BIOS, re-formatting drive C to do a clean install, etc.) finally managed to a successful installation.

  All right, except that it does not find my second hard drive.  I have the disks attached ports SATA 1 & 2, but the system reads them so much as the C: drive.  The second disc appears in the BIOS Setup and Explorer as just the C: drive.

  Tried to change the SATA port for second drive to 3 and 4 with the same result.  It always appears as the C: drive.

  How can I get the systΦme can recognize the drive, so it can be assigned to a drive letter and I can access?  I suspect that the reformatting of the first disc for installation probably erased some boot sector/configuration info.

  A side issue: before attempting to upgrade to XP, I backed up my "Documents and Settings" on an external drive.  Now that XP is passed to the computer, can I continue to use Windows Easy Transfer to retrieve all my settings and info from the program, or who's going to screw me up?

  Check if the hard drive is assigned to a drive letter in disk management.

  Click Start, right click on computer

  Click on management of

  Expand disk management

  Select your external hard drive if its posted here

  Make a right click paths and change drive letter

  Restart your computer, open the computer in the start menu and see if it shows then.

• Select the default tray when printing from MS Word or any other application HP OfficeJet 8610

  Hello

  We have HP OfficeJet 8610 with additional tray. So, we have Tray1 and bac2. That's what I read in the specs of the printer about how we can use the bins:

  • Loaded into all of the paper trays and use paper from a tray if the other tray is empty
  • Loaded into all trays and paper of one of the bins first use
  • Be able to choose plain paper and another type of paper that you use occasionally

  My question is:

  Let's say that we have put the tray 2 as the default tray.

  In MS Word or any other application in layout, you can define special tray (say 1 tray) paper source. This means that the document should be printed on paper from the selected tray (Tray 1). But in our case, the document is always printed using paper from the default tray (tray 2).

  Could you please confirm that this is the expected behavior?

  Thank you so much, Ana.

  Hi @AnaGligorijevic,

  I understand that you want to be able to print the same document at different trays and change the setting via the Word software. This printer is not able to change the settings of the tray for different pages in the same document to multiple pages.

  To work around this problem, you can use the parameter to "print pages." "Select it print pages selected, then for other pages ' print pages" yet once and then change the parameters of the status bar of the application.

  The application, you can change the settings of the tray for 1 page or a multiple page document. But it will print all pages of the specified tray.

  Hope that makes sense. Thank you!