addEventListener for FLVPlayback, VideoError

Similar Questions

• addEventListener for checkbox

  Hello

  I have a checkbox. I want to set up an eventListener for her.

  It works:

  cb.onClick = function()

  {

  Alert ("clicked");

  }

  Do not do this:

  cb.addEventListener ("click", cbClick);

  function cbClick()

  {

  Alert ("clicked");

  }

  Why not? I used the method addEventListener for many other components.

  Thank you

  Jakob

  'click' is the correct word, but since the CC versions, everything that has a similar behavior to a button (with or without value, IE buttons of base, iconbuttons, checkboxes, radio buttons, etc.) do not meet the events 'mouseup' and 'click '. Only mousedown, mouseover, or mouseout/mouseouthandler() for this type of widgets. It has been disabled in silent mode.

  Xavier

• using addEventListener for Enter and Exit frame

  Hi, sometimes I want to define a function in a specific picture in the start menu and leave this frame

  for example I have Flv player into 20 frame, I have the background sound (mp3 player), so I want when swf is in this framework that my sound goes off and when he leave and go to an other images, the sound played once again...

  I put the script in frame 20:

  addEventListener(Event.ENTER_FRAME,enterfunc);
   
  function enterfunc(e:Event):void {
      trace("I started");
  }
   
   
  addEventListener(Event.EXIT_FRAME,exitfunc);
   
  function exitfunc(e:Event):void {
      trace("will Exit");
  }
  

  but after test movie I see that I started and will exit short Repeatly without a showdown!

  Notice: first of all, I put my sndChannel = soundClip.play; and sndChannel = soundClip.stop;  but my music runs several times and finally hung my system and I need to restart so I use trace to see

  So what is a problem?  Please spend some time and help me

  because their names are misleading.  Event.EXIT_FRAME does not execute once when the playback head leaves a frame.  It runs several times.

  Similarly, Event.ENTER_FRAME does not execute once when the playhead in one frame.  It runs several times.

  You can run a function when the playhead passes a a frame by adding a function to the framework call:

  f() ;  attached to a frame will call the function f when the playhead enters that frame.  and there are other ways to do this.

  You can run a function when a read head there is a frame by invalidating the scene and using a rendering event when a goto is executed:

  internship. Invalidate();

  this.addEventListener (Event.RENDER, exitingF);

  this.gotoAndPlay ('whatever');

  function exitingF(e:Event):void {}

  This code runs when you exit this frame and "all that" is rendered (displayed =);

  }

• addEventListener for later

  I'm doing a subclass of flash.display.Loader, who should do something when the charger is finished loading the content.

  So, I do addEventListener (Event.COMPLETE, onComplete) on my subclass of loader.

  But this Eventlistener is never called. If it's supposed to happen? I can't use an Eventlistener on the class that dispatches the event?

  My code looks like this:

  public class MyLoader
  {
  public function MyLoader() 
       {
            super();
                 
                 //addEventListener(Event.INIT, onComplete);
       }
       
       override public function load(request:URLRequest, context:LoaderContext = null):void
       {
            super.load(request, context);
            addEventListener(Event.INIT, onComplete);
       }
       
       protected function onComplete(ev:Event):void
       {
            trace("loading complete");
       }
  }
  

  I tried both to add my Eventlistener depending on the load and in the constructor, the two doesn't work, my onComplete function is never called.

  An Eventlistener that I add outside of class (var loader: MyLoader = new MyLoader; loader.addEventListener (Event.INIT, onComplete)) is called without a problem.

  It should work like this? I can't listen for events on my own class?

  Property contentLoaderInfo the Loader class is what I use normally to follow events of charger.  Based on the documentation, the class Loader itself passes loading events.

  Loader.contentLoaderInfo.addEventListener (Event.COMPLETE, completeHandler);

• FLVPlayback component AS3 detect when there is no source file?

  Hi all

  I have an AS3 FLVPlayback component on stage playing movies from a local folder. There are 22 films in the folder and it chooses the one he will play random mathRandom function where it concatenates .flv to one that has been generated (1.flv, 2.flv and so on).

  For ease of maintenance, I decided to control the set of random numbers with a variable that is defined in an external text file, so if someone adds new movies all that person needs to do is go in the external text file and the increase in the value of the variable to reflect the number of films in the folder (and any new film should follow the naming convention that is number.flv). When I'm in control of the files is no problem, but I can't looking for a way to detect if the number generated film exists or not (let's say the random number is 10 so 10 flv should be played, but 10 flv does not exist in the folder). I just want to add an if statement that handles only if there is no such thing as the chosen film look for another, but I can't seem to find a property that I can use to test this.

  My FLVPlayback instance is named myMoviePlayer. I tried:

  myMoviePlayer.totalTime: this always returns NaN, that the film exists or not.

  myMoviePlayer.preferredWidth: this always returns-1, that the film exists or not.

  myMoviePlayer.state: the return of loading, if film still exists or not.

  I tried all other read-only properties defined for FLVPlayback, but they always return the same value that the film exists or not. So I tried to trace these properties but with myMoviePlayer.source and that always returns an error: «Property may not set a static String type reference»

  In any case, this is my code as it is right now I'm trying to solve this problem:

  var loader:URLLoader = new URLLoader();
  loader.dataFormat = URLLoaderDataFormat.VARIABLES; 
  loader.addEventListener(Event.COMPLETE, loading); 
  loader.load(new URLRequest("movies.txt"));
  var extNumber;
  function loading (event:Event):void { 
            extNumber = loader.data.nMovies;
            ran = genRandomNum(1, extNumber);
            trace(ran + ".flv");
            myMoviePlayer.source = 25 + ".flv"; //I actually have extNumber defined as 22 in the movies.txt file so 25 should force an error
            trace(myMoviePlayer.totalTime);
            if (myMoviePlayer.totalTime > 0) {
                      trace ("It lives!")
            }
  }
  myMoviePlayer.addEventListener(Event.COMPLETE, playAgain);
  stage.displayState = StageDisplayState.FULL_SCREEN;
  myMoviePlayer.fullScreenTakeOver = false;
  stage.scaleMode = StageScaleMode.NO_SCALE;
  function playAgain(e:Event):void {
            trace("starting over");
            trace(extNumber);
            ran = genRandomNum(1, extNumber);
            trace(ran);
            myMoviePlayer.source = ran + ".flv";
            myMoviePlayer.play();
  }
  var ran:Number = genRandomNum(1, extNumber);
  function genRandomNum(minNum:Number, maxNum:Number):Number {
            return (Math.floor(Math.random() * (maxNum - minNum + 1)) + minNum);  
  }
  
  

  Here are some classes that check if a file exists on a server:

  loading http://www.kirupa.com/forum/showthread.php?328651-checking-to-see-if-a-File-exists-Before-

• Remove the eventlistener for multiple movieclips in a table

  Hi all

  Game scenario:

  I do a crossing road learning alphabet game. In the first level there are 10 alphabets tell of A J (movieclips) stand on one side of the road in a mixed random way. The player must move the alphabets (using the keyboard commands) in alphabetical order, so that it strikes at the entrance of a kindergarten and is removed from the scene.

  Situation-problem:

  If you click on the correct alphabet the player gets a positive score. And if the wrong alphabet is cliked, a negative score is given. This works well for the first alphabet, but, once the first alphabet hits its target and is removed from the scene, it does not work for the next alphabet since removeEventListener to the case the first alphabet code continues to work for the continuous alphabets.

  For eg., once the first alphabet "letA" is removed from the scene, and then when I click on "Letbs" that gives a score to both positive and negative. Positive note, since it is the next alphabet that must be clicked. Negative note, since the "wrongClick" table contains the movieclip 'Letbs', although it was intended for the situation, when "letA" was also present on the stage.

  Code:

  var wrongClick:Array = new Array (Letbs, THG, letD, summer, fall, letG, letH, letI, letJ);

  for (var i = 0; i < wrongClick.length; i ++) {}

  wrongClick [i] .addEventListener (MouseEvent.MOUSE_DOWN, negScore);

  function negScore(e:MouseEvent):void {}

  gameScore += pointsForMiss; showGameScore();

  wrongClick [i] .removeEventListener (MouseEvent.MOUSE_DOWN, negScore);

  }

  }

  Requested solution:

  Can someone please tell me how I can write code that, once an alphabet is removed from the scene, the method addEventListener for above of movieclips is completely removed and a new addEventListener starts to work for the rest of the alphabet which remain on stage.

  thnx in advance

  Kind regards

  Ginette tabriz

  run this code:

  for (var i = 0; i)

  wrongClick [i]. delete EventListener (MouseEvent.MOUSE_DOWN, negScore);

  }

  When the correct letter is clicked.  That is to say, in the correct letter listener function.

• FLVPlayback how to access: _lastUpdateTime

  How can I get the _lastUpdateTime of a currently FLVPlayback (called proceeding: my_Player) in a variable?
  

  Found! It wasn't anything to do with _lastUpdateTime

  I found a reference to .playheadTime

  So: my_Player.playheadTime will give me the time current playhead.

  I guess my problem is that I don't know where to find a list of all the variables that go with the FLVPlayback instance (unless the online help). I did a search on the online help for playheadTime and found what I was looking for. Then I did a search for FLVPlayback. (do not forget the '.'). It gave me something that would help me out - a list of all items related to FLVPlayback.

• Flash ActionScript 3.0 stop all video clips

  Hello everyone. I was hoping that someone could share some knowledge of AS3 with me

  -Situation I have several frames. Each image contains a movieclip. Each movie clip has audio and a plaintiff bar. Is there a next button to switch between the images in the main timeline and back.

  Question- When you press back or next button, movieclip audio does not stop and it overlaps the next or previous image!

  Desired result- When you click the next or back button, it will stop 'none' movieclip that plays before going to the previous or next frame.

  I think I'll be having a lot of frames (so a lot of clips), coding so individually each back/forward per image for a specific movieclip button is a bit complicated and reveals be buggy at this stage.

  
  

  Question- Is there, and if there is, what is the function to movieclips all stop playing?

  for example

  function next(Event:MouseEvent):void {}

  < stop(); all video clips >

  nextFrame();

  }

  next_btn.addEventlistener (MouseEvent.Click, Next);

  Thank you all! Your insight is most welcome and will be appreciated.

  You can use:

  function stopAllF(mc:*):void {}

  MC. Stop();

  If (mc's MovieClip) {}

  for (var i: int = 0; i<>

  If (MC.getChildAt (i) is the MovieClip) {}

  stopAllF (MovieClip (mc.getChildAt (i)));

  }

  }

  }

  }

  but I would recommend that you use the removedfromstage for flvplayback components code and leave stopAllF it was like that.

  BTW, if you have a small number of movieclips to stop on an image, and they have no child movieclips that need to be stopped, the same code removedfromstage works for them too.

  and again, please check the answers useful/correct.

• Video stop event COMPLETE and action

  Hello, I am a demand for an exhibition and is necessary to restart to start itself if it is innactiv, for other visitors.

  I use

  addEventListener (Event.ENTER_FRAME, fl_EnterFrameHandler);

  function fl_EnterFrameHandler(event:Event):void

  {

  MovieClip (this.root) .gotoAndPlay (1, "Scene 1");

  }

  For most of my sequences, but when it's for the pages of the video, I have a question:

  I have a PlaybackFLV video on my 'sequence 4' and I want to return to the Sequence 1 when this video is over

  I tried whith, copy the following code:

  @

  Import fl.video.FLVPlayback;

  Import fl.video.VideoEvent;

  comp.addEventListener (Event.COMPLETE, videoComplete);

  function videoComplete(Event:Event):void {}

  MovieClip (this.root) .gotoAndStop (1, "Scene 1");

  }

  
  

  and

  
  

  Import fl.video.VideoEvent;

  video_secret_fab_EN.addEventListener (VideoEvent.COMPLETE, videoComplete);

  function videoComplete(Event:VideoEvent):void {}

  MovieClip (this.root) .gotoAndStop (1, "Scene 1");

  }

  But I always get this message:

  004, layer 'Actions', Image 28056 sequence, line 55, column 61

  1119: Access the FULL maybe property not set through the static class type reference.

  Sequence 004, layer 'Actions', Image 28056, line 55, column 61 1119: access to the COMPLETE poperty can be undefined, via the type of reference a static class. (Sorry I'm french and not bilingual...)

  I am new to AS3 and I don't know what the problem is.

  I don't want to use a timer, because I have to integrate the same code for multiple video pages in my project.

  Thank you for your attention and hope you can help me.

  I think that the event Complete for FLVPlayback uses only the standard event class:

  import flash.events. *;

  comp.addEventListener (Event.COMPLETE, videoComplete);

  function videoComplete(e:Event):void

  {

  MovieClip (this.root) .gotoAndStop (1, "scene 1");

  }

• A MP4 with film loop controller

  It seems that there should be an option for a MP4 movie in FLV playback in a loop, but I don't see it anywhere. So what to do if I want a clip will loop indefinitely?

  If flv_pb is your reference for flvplayback:

  flv_pb.addEventListener (Event.Complete, completeF);

  function completeF(e:Event):void {}

  flv_pb. Seek (0);

  flv_pb. Play();

  }

• ActionScript Toolbox is missing &amp; Adobe Flash not to publish the .html page

  When I opened Adobe Flash I get this message

  Analysis of XML errors *.

  Line 0: the object = "[corresponding mx.video.FLVPlayback] ' attribute was not found on the version of script assist text = '.addEventListener (%)" "for an item

  Analysis of XML errors *.

  Line 0: the object = "[corresponding mx.screens.Form] ' attribute was not found on the version of script assist text = '.addEventListener (%)" "for an item

  Line 0: the object = "[corresponding mx.screens.Slide] ' attribute was not found on the version of script assist text = '.addEventListener (%)" "for an item

  and when I opened the action script all as I find is the following

  

  and when I try to publish a Web page of .html off the flash get them all is a blank page when I change I can't find no code

  This is the first time that this has happened and I have no idea why or how to fix it... Please if anyone has an idea to tell me
  

  try to remove and then reinstall your flash program.

• positioning of external flv files on stage?

  HY, I'm loading 3 files flv so that the first file is read once and the other two loop later. Now I'm interested is it possible to position the FLVs on the stage for some contact information when they start playing (so for example that the first flv plays as a default in the Center, the second flv file plays a little right and the third a bit left cheek). This is the code I use:

  import fl.video.VideoEvent;

var clips:Array=["1index.flv","2sat.flv","3spavam.flv"];
var index:int = 0;

/* gledamsat would be what I think you are wanting to name the instance of the FLVPlayback on the stage... */
gledamsat.addEventListener(VideoEvent.COMPLETE,goNext);

function goNext(e:VideoEvent):void {
        index++;
        if(index > clips.length-1){
           index = 1;
        }
        gledamsat.source = clips[index];
}

function init():void{
   gledamsat.source = clips[0];
}

init();


  Now, I tried these lines to place the flv files, but it does not work:

  if (2sat.loaded == true) {
2sat._x = 400;
}
if (3spavam.loaded == true) {
3spavam._x = 100;
}

  Can anyone help? Placeable flv files loading?

  I got that from your new to AS3. There was a where you supposed to have the starting position for FLVPlayback

  So be...

  try to use next...

  var original_position = gledamsat.x;

  function goNext(e:VideoEvent):void
  {

  index ++;
  clips [index] = gledamsat.source;

  if(index == 0)
  {
  gledamsat.x = original_position;
  }
  another if (index == 1)
  {
  gledamsat.x = original_position + 10;
  }
  another if (index == 2)
  {
  gledamsat.x = original_position - 10;
  }

  If (index == (clips.length - 1))
  {
  index = (-1);
  }

  }

• SWIPE_DOWN does not work

  Hello again,

  I want to create a menu top bezel for my application.

  To realize that I want to listen to the the QNXApplicationEvent.SWIPE_DOWN. Unfortunatelly that is not sent. If I test the same code to listen for a SWIPE_START event instead, it works perfectly.

  Please help, I hope it's just a bug in the Simulator.

  Greetings

  V

  @Vemilyus, some of you are dead you don't have little code in another module, or sooner or later in this, makes an addEventListener() for SWIPE_START?  It would be the only way I know to remove SWIPE_DOWN.

  If you do not see, I think your only option at the moment, unless someone else has an idea, is to make a new application with nothing in it except the Sprite base (main class) and addEventListener for event drag a Manager with a trace() inside routine.  Run with SWIPE_START to make sure it works, then change to SWIPE_DOWN and if you don't get that, after all this and anything else you can think of that might be involved.  Version of the SDK, platform,... do not know what else.

• Control edge file animate OAM with the buttons play/pause of Captivate on the skin.

  Hello world

  I worked on a project where I mix a variety of objects and animations.  I do animations animate on board.  The problem I have is that when the user clicks the button pause on the Captivate playback controls, the oam file do not pause.  I found descriptions of how I can make an animation to play/pause the Captivate timeline button on board, but I can't find anything on the use of the Captivate pause button to control the Edge file animate.  Discussions only that I managed to find on that seem to be the answer.  Someone had a bit of luck with this question?

  Any advice would be appreciated.

  Thank you

  Randy

  OK, it's a bit hacky, but it works quite to control the main timeline object in a file of edge of Cape Town, where the Edge file has been imported to Cap 9 as a Web (oam) object. I went seeking answers same like you and came from vacuum, then start to tinker myself and came across the following method.

  Let's use window.postMessage to send a string between Cape document window and document edge iframe window then react accordingly. You can learn more about postMessage accepted battery answer here: http://stackoverflow.com/questions/3076414/ways-to-circumvent-the-same-origin-policy

  In your dashboard file click the support of Actions for the stage object in the timeline and select the compositionReady event. Paste this code into the text window:

  addEventListener for Chrome, attachEvent for IE

  window.addEventListener ('message', receivedFromCaptivate, false);

  window.attachEvent ('onmessage', receivedFromCaptivate);

  function receivedFromCaptivate (event) {}

  switch (event.data) {}

  case "play":

  SYM. Play();

  break;

  case "pause":

  SYM. Stop();

  break;

  }

  }

  Save the file and publish it as an oam, then import the OLS in a slide of Cap, as you normally would. Now, to put in place things of the CAP. Here is a visual aid for the rest of the explanation...

  

  In the PAC file select the control that you use to start playing the chronology of the edge (in the example above the "slide4Play"), select the checkbox 'Use as button' in the properties on the right, select the "Actions" tab, then to the drop-down list for 'Success' choose "Execute advanced Actions." Click the folder next to the selection of Script control and advanced Actions dialog box should appear. Name your action something (for example, "playEdgeSlide4"), then click the 'Add' in the grey bar to add a new action in the queue. In the drop down "Select Action"... ", choose"execute Javascript. "In the drop down menu"select the window... ". ", choose"current ". Then click on the 'Script_Window' button to bring up a window of text Javascript crap. In this window, you can paste this:

  try {}

  $("iframe") [0].contentWindow.postMessage ("play", "*");

  } catch (e) {}

  Console.log (e.message);

  }

  Select 'OK' to close the window of text Javascript crap, then click the 'Update Action' button to save your new action. Now let's do the same for break action - select the control that you use to pause, go through the steps above, the name of the action, implement advanced action in the same way and in the Javascript crap text window, paste the following text:

  try {}

  $("iframe") [0].contentWindow.postMessage ("break", "*");

  } catch (e) {}

  Console.log (e.message);

  }

  Cap incorporates the Edge file in an iframe on the page that has its own document window. In order to communicate between base ceiling windows and the iframe, we use the postMessage call. So when you hit your button Pause/Play in Cape Town, he publishes an event to the function that gets recorded in the iframe on board. And in the event.data is the string we send above the Cap base window in the function postMessage ('play' or 'pause'). We use a simple switch to react to the data string, stop or have fun with the main symbol of the scene at the edge (sym.play(1000) (), sym.stop ()).

  I hope this helps!

• in the Gallery sub navigation buttons do not work

  Hi guys,.

  I'm a newbie to Flash. I am creating a site of flash photography. I have four buttons for navigation on the home page. Home, portfolio, features and contact. The section has several navigation buttons that should lead me to different galleries. So now I can navigate to the features section, but can't go to any specific Gallery. I wrote a code addEventListener for Gallery sup buttons, but I get the error "still life of undefined property 1120:access. Dead nature is one of the buttons in the Gallery sub. I get the same error for all buttons in the Gallery sub. I gave an instance name for all the buttons, so I don't know what means error. I even tried calling a different function. When I test the movie, it continues to play in loop. can anyone help? I can paste the code here, if someone wants to look at the issue.

  Thank you

  Rohan

  whatever stillllife of code references cannot run until dead nature exists.  If it's on frame 30 of your main timeline, so the code cannot run until 30 parts framework.

  If you still don't understand how to solve your problem, display the code that redirects your timeline to frame 30 and dead nature referencing code.