addEventListener for later

I'm doing a subclass of flash.display.Loader, who should do something when the charger is finished loading the content.

So, I do addEventListener (Event.COMPLETE, onComplete) on my subclass of loader.

But this Eventlistener is never called. If it's supposed to happen? I can't use an Eventlistener on the class that dispatches the event?

My code looks like this:

public class MyLoader
{
public function MyLoader() 
     {
          super();
               
               //addEventListener(Event.INIT, onComplete);
     }
     
     override public function load(request:URLRequest, context:LoaderContext = null):void
     {
          super.load(request, context);
          addEventListener(Event.INIT, onComplete);
     }
     
     protected function onComplete(ev:Event):void
     {
          trace("loading complete");
     }
}

I tried both to add my Eventlistener depending on the load and in the constructor, the two doesn't work, my onComplete function is never called.

An Eventlistener that I add outside of class (var loader: MyLoader = new MyLoader; loader.addEventListener (Event.INIT, onComplete)) is called without a problem.

It should work like this? I can't listen for events on my own class?

Property contentLoaderInfo the Loader class is what I use normally to follow events of charger. Based on the documentation, the class Loader itself passes loading events.

Loader.contentLoaderInfo.addEventListener (Event.COMPLETE, completeHandler);

Tags: Adobe Animate

Similar Questions

How can I print my lists of distribution for later use if the drive breaks down?

Had a problem with the hard drive on the new computer. Company reloaded hard drive. Lost all email addresses. Had to manually type in THE addresses again. Is there a way I can save my addresses to disk or print it out on paper for later use if I lose them again?

Open the address book window.
Select tools-export
Select the type of file.
The name of the file.
Choose where to save it.

I can get the data of a hygrometer using the RS232 port with the following T75.2F:H17.0% using a RS232 data logger format. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

I can collect data from a hygrometer in a text file using the RS232 port with the following T75.2F:H17.0% format, these data are collected using a data logger software. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

The setting below causes the error. Change for the second selection, output values of all channels.

Best way to store instances of class (or at least their private data) in a file for later use?

I've been messing around with this concept for a few hours and have not yet found anything conclusive. I have a system where I want to store instances of a particular class (private data have a 2D array, a 1 d table, some Boolean values, numbers, and a set of strings.) for later use. The goal is to store a table of these classes for customization purposes. I've experimented with palette OpenG configuration file, especially the "read/write formatted article cluster", but I get some strange errors when I change around the private data and try to save the same instance. I thought using flatten XML vi and the wiring of the array of instances followed by reading in a table, but I anticipate similar problems. What other options are there? TDMS? A SQLite database? Should I do a few other split in the very basic types and combine them with the execution having read in? All suggestions/stories welcome.

LV classes are compatible with the Flatten to Unflatten from XML and XML functions. Have you ever tried this approach?

Norbert

Upon resuming from hibernation my computer asks continue logon or delete restoration data. Restore data refers to a previous restoration or a restore point that was created for later use?

Original title: F8 and troubleshooting.

After starting my computer Gateway Profile4 after hibernation, I wonder to continue logon or delete restoration data. Restore data refers to a previous restoration or a restore point that was created for later use? If restoring the use of revert to a previous state, you can cancel that catering is also created which I think could be is requested.

original title: after waking up from hibernation, he asked me to continue logon or delete restoration data.

Recently, I had this problem. This link above (http://support.microsoft.com/kb/294427) helped me.

Basically, it seems to be a corrupted restore point created to go into hibernation. I think that the system wants to remove that restore point and reboot "fresh."

Restore data refers to a previous restoration or a restore point that was created for later use?

A previous restore point.

If restoring the use of revert to a previous state, you can cancel that catering is also created which I think could be is requested.

If I understand you correctly, no.

Hope this helps

-Rich

print files to memory for later printing spooler loads

"I got Lexmark X 5150 - a quite old)) I installed it for my new laptop Toshiba and initially, it worked well. And that my computer has started to stop the print spooler all the time and I had to manually start to print. And now I can't print anything and in the print spooler, there is a message "files to memory for later printing charges. How to clean and get out the problem? Thank you very much for the help in advance!

Hello nastya1969,

Thank you for using the Microsoft answers Forum.

First of all, try to go to the website of Vista compatibility below to determine whether or not the device can be used on a Vista computer.

http://www.Microsoft.com/Windows/compatibility/

Second, try to go to the Microsoft Automated Troubleshooting website to see if the tool is it can be useful in telling you what could be wrong. You could also try to uninstall the drivers and software for the device, reboot and then run the installer again to see if maybe it was a corrupt install.

Microsoft Automated Troubleshooting Services

http://support.Microsoft.com/GP/mats#TAB0

Let us know if that helps.

Judd
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

addEventListener for checkbox

Hello
I have a checkbox. I want to set up an eventListener for her.
It works:
cb.onClick = function()
{
Alert ("clicked");
}
Do not do this:
cb.addEventListener ("click", cbClick);
function cbClick()
{
Alert ("clicked");
}
Why not? I used the method addEventListener for many other components.
Thank you
Jakob

'click' is the correct word, but since the CC versions, everything that has a similar behavior to a button (with or without value, IE buttons of base, iconbuttons, checkboxes, radio buttons, etc.) do not meet the events 'mouseup' and 'click '. Only mousedown, mouseover, or mouseout/mouseouthandler() for this type of widgets. It has been disabled in silent mode.

Xavier

How can I download videos from my DSLR Sony DHV for later editing and the creation of a DVD? I just installed Adobe software today and can't find anything about it.

How can I download videos from my camera Sony HDV for later editing and the creation of a DVD? I just installed Adobe software today and can't find anything about it.
I am very familiar with Pinnacle, but I've been disillusioned about their support.
Ian

First you connect your device to your computer using your Firewire port, then press F1 and search for capture

http://helpx.Adobe.com/Premiere-Pro/KB/cant-capture-DV-HDV-video.html

- and more info on Windows http://forums.adobe.com/message/4708997

-Legacy driver http://www.studio1productions.com/Articles/Firewire-1.htm

-All versions of Windows from 7 to 10 need legacy driver!

This is old, but still a good place to start - CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 has many links to help learn... including how to still get to create a DVD

How to save custom cultures as presets for later use?

How to save a custom size/resolution for later use culture?
Thank you
Gene

Please follow the steps below.

> Launch Lightroom

> Go to the develop module and click crop

> Click on the drop-down list format to and select enter custom

> Once you click OK, it will get applied and added to the list itself.

Let me know if it helps.

~ UL

Where are stored the mobile drawing Illustrator files for later use in Illustrator Desktop?

Hello
who can tell me, where are stored files from vector to the Illustrator Mobile draw for later use in Illustrator Desktop? In the cloud, there is only the .png and .jpg files. The files are sent immediately to the office, but when I want to use them later, I can not find them more.

There is a file PushToDesktop in the record in support of the Application that contains all the files.

BUT: you can just open in Illustrator. They need to be pushed.

Video for later viewing of not existing presentation activities.

If I set up all my video pods in the only area of the presenters. Then start recording will I will be able to view them later or should all video pods must be located on the main display board? If not, is it possible I can do video for later viewing not the presentation activities?

I guess you could run two rooms at the same time, one who is audio only and one that contains video, audio and everything you need to record. Then use the recording of the second Chamber, as needed.

Decode the error in the output to the file for later burning to DVD

I have a MPG file in Ulead Media Studio Pro (what's more, I can run because it does not work on Windows 7 using my new PC). I have created a new project in PE9, added the mpg, dragged to the timeline and said first file to change the project settings to match. It is now PAL DVD top field first. There is no red line on the timeline above the clip. When I try to print to a file for later burning to DVD, I get an error of decoding around a particular frame. When I go near the image in the monitor window and step forward to an image both that it moves smoothly until it gets on the framework in question when there is a noticeable delay to press on the arrow and the time counter updating to next chassis number. The MPG plays well in Windows Media Player and VLC player - it shows a melted transition crossed to the place that fails in PE9. Can I do to solve this problem? I have no software authoring otherwise independent DVDs that would be an option.

It's only a guess, but it seems that there is something wrong with the structure at that time MPEG GOP.

There are several freeware software DVD that run under Wn7, by this RESEARCH. I never have used any, as I have Adobe Encore, but he is now only available in Premiere Pro.

If Ulead worked well with this MPEG file, it is either compatible DVD or Ulead is more lenient than for the PrE. Software Adobe aren't just leniet, because the output is very strict. Some programs, not so much.

Others that eventually make a cut at each end of the crossfade and leave in the form of a cut or shorten the two scenes on each side of the deleted passage and another application, I can't imagine a way to "clean up" the part of the MPEG.

Sorry, but good luck.

Hunt

Custom for Lat/Long text field format

I am new to the creation of PDF files and did not JavaScript for 10 years.
I was hoping that someone would be able to provide the custom format script required format a text field for Lat/Long in DMS (e.g. 70 ° 12' 34 "W).
Short, someone at - it a custom format script I could go and change?
Thanks in advance!

Try calling the function shown below in the latitude or custom Format script longitude field. This function is intended to be placed in the form of script at the level of the document.

As a custom Format to the text box script, use the following:

For Longitude field

dd_to_dms (true);

-OR-

For Latitude field

dd_to_dms (false);

I was liberal with the comments in the hope of equivocation. What I have not done is a kind of data validation. The field entry is supposed to be a number that makes sense (for example, to +/-180 for longitude, +/-90 for latitude). You can add a custom script to strike to limit the entry of a number and a Validation script to check its value. He rounds as second to the second, but this could be changed if you need fractional part for seconds. Post again if you have any questions.

function dd_to_dms (isLong) {}

Custom Format script for text acroform field
Convert lat/long values from decimal to degrees, Minutes, seconds
' DDD.dddd-> () [DD] D [M] I S [S] "N | S | E | W
isLong: latitude, longitude = true = false

Field blank if no entry
If (! event.value) {}
Event.Value = "";
return;
}

Get the field as a number entry
var val = + event.value;

var cd, t, degrees, minutes, seconds;

Determine what cardinal to display
If (isLong) {}
CD = (val< 0)="" "w"="" :="">
} else {}
CD = (val< 0)="" "s"="" :="">
}

To make the number positive
Val = Math.abs (val);

degrees = part of the input value
degrees = val | 0;

Download fractional part
t = val 1.0%;

minutes = fully part of (fractional part * 60)
t = t * 60;
minutes = t | 0;

seconds = fully part of (the fractional part of previous * 60)
t = t % 1.0;
seconds = (t * 60) | 0;

Display in the field
Event.Value = degrees + '\u00b0' + minutes + "'"+ seconds + "\" "+ cd;»
}

OfficeJet 8625: Scheduling faxes for later transmission

The manual, in the section on the fax beginning on page 60, begins the second sentence with: "you can schedule faxes to be sent at a later date...". ».

I was not able to find more information about this in the manual, or in dialog boxes when you choose the 8625 as my FAX printer and dialog boxes to send a fax.

I'd be happy to use this feature via the print/fax HP driver if it is actually available and can someone tell me how to do, or, I would gladly use Windows Fax-Scan to plan faxes for transmission later if someone could tell me the network address (WFS is asking for a network fax server address) to use.

Hi Jimmy,.

Welcome to the Community Forum of HP.

Your printer user's guide does not say it's either lying to you or information is missing. I don't know which is the case.

The following is from the HP Photosmart 7520 user's Guide on the same topic (Page 28):

Excerpt:

Schedule a fax to send later

You can schedule a fax black and white to send in the next 24 hours. This allows you to send a fax in black and white, later in the evening, when telephone lines are not as busy or telephone rates are lower, for example.

The printer automatically sends your fax to the specified time.

You can schedule only a fax to send at once. You can continue to send faxes normally, however, a fax is planned.

NOTE: You can only send regular faxes in black and white.

To schedule a fax from the printer control panel

1. load your original face up to print down in the right front corner of the glass or the side to be printed in the automatic document feeder.

2. Press Fax and then tap Settings.

3. touch Send Fax later.

4. Enter the time by touching the up and down arrows touch AM or PM, and then touch done.

5. Enter the fax number using the keyboard, touch (speed dial) to select a speed, or touch (call history) dial to select a number already dialed or received.

6. press start fax. The printer scans all of the pages and the time is displayed on the screen. The fax is sent at the scheduled time.

----------------------------------------

To cancel a scheduled fax

1 1 Appuyer support on the fax, and then tap Settings.

2. touch fax later.

3. Press cancel scheduled fax.

==========================================

Click on the thumbs-up Kudos to say thank you!

And... Click on accept as Solution when my answer provides a fix or a workaround!

I am happy to provide assistance on behalf of HP. I do not work for HP.

Support for late binding

I created a couple of screws similar higher level who do use a number of Commons subVIs. In the interest of the modularity, I would place these common subVIs in some kind of a folder or a shared library by the screws of upper level - if far, everything is fine.

Some of these shared subVIs refer uniquely to each of the top-level screws and the other implemented separately subVIs. My original thought was that LabVIEW could use "late binding", when loading the VI of higher level for execution, to resolve all references of Subvi and thus get the unique subVIs implemented correct for the VI of top-level special loading. However, observations have led me to believe that all the Subvi references are resolved statically at compile time, and thus a shared Subvi cannot relate to different subVIs that top-level VI is running. And I see that it makes sense that it must be this way, given how the LabVIEW development environment.

Therefore, it seems that subVIs shared must be able to resolve one of their own references Subvi statically to a specific implementation at compile time. Thus subVIs that this is impossible cannot be shared subVIs, even though they are otherwise identical in each of the top-level VI contexts. Separate identical copies of such subVIs will be maintained for each level higher VI.

Have I not the roughly correct? Is it possible that this kind of "late binding" can be supported in LabVIEW?

There are two ways you can do this job. you will need to determine which is appropriate to your situation. The first is to use the VI reference for the specific instance you want. Inside the generic Subvi you use a reference call to call the VI that was passed in. Several of the screw provided with LabVIEW explain how it works, for example take a look at 'optimization constrained Non-linear' in mathematics-> optimization palette. You will see that one of the terminals are the reference to a VI that implements the function to optimize.

Another possible solution is to use dynamic distribution of Object-Oriented Programming of LabVIEW features. In this case, your library would implement a class. The specific instance you want to call would inherit from this class and define a specific VI which replaces the version of generic library. When a VI in the library calls the Subvi, she will be sending dynamically to the method of the child, if the object is of the class of the child and the method of the child exist.

addEventListener for later

Similar Questions

Maybe you are looking for