Adding a menu drop-down menu item?

Similar Questions

• 2 values can be added to a drop-down list item?

  I probably need to explain what it is I'm doing first. It could even impossible the way I'm doing it. So if there's a better way, please do help. But I try to have items listed in a drop-down list. More precisely the elements that are of different lengths with different numbers. I have been using the value of the elements to do simple calculations to work. But I also want it so that once an item is selected the item to a list of material later in the form printed. I'm sure I can set the value of the element as the item number and I the number displayed next to the item (in another column) later in the order form. But I want to be able to always perform the calculations in the subform where is the original drop-down list. Is it possible to assign 2 values (one for use with calculations) and one for use as an item number? Or is there a better way to do what I'm doing? I know I could just name the list drop-down list item and contain the number of point in the name using addItem. But I don't want to confuse the user with numbers, they did not need to see. Only the person who sells the materials needs to know the number of points, not the user.

  Back again...

  Think - the behavior is expected because the values specified in the binding tab lead the overall binding for the drop down menus.

  So if the first dropdown the text resulting from elements such as the display values AND the second dropdown has numbers of items like display settings - then it will work. As long as the two drop-down lists have the same number of elements and sequence in the specified values is the same.

  This means that you must keep two drop-down lists.

  It may be a good idea to have the second dropdown (numbers) configured to read only so that the user cannot interact with it.

  Good luck

  Niall

• Help to the drop-down list items in list making invisible field

  On the attached form, I have a drop-down list "Item". How can I get the items in this list make the text field "embroidery" visible or invisible depending on the element selected?

  My programming skills are very basic, livecycle as I am just getting into this. Any help would be appreciated.

  Tom,

  our email form.

  hope this is what you were after.

• Pages of dashboard as a drop-down list items

  Hello
  
  I have more than 6 pages in my dashboard, I want to display as a drop-down list. Before posting here, I looked at all possible sources and link to joe
  Dashboard OBIEE - Pages of dashboard as a drop-down list items
  
  But after going through this post I force pass through. Can someone guide me or someone that can give me the right solution.
  
  Any help would be greatly appreciated.
  
  TIA,
  KK

  Sure no problem,

  concerning

  John
  http://www.obiee101.blogspot.com/

• Adding Start Menu items. How the security he she?

  Hello

  I installed two apps (Metatrader 4.0) on 2 separate files and during the process of installation in two different Start Menu items (names). Only is shown in my Start Menu. I have already tweaked apps and have both appear in my Start Menu. I just (very) recently did a clean install of my system. I have 2 external hard drives and network drives 2. I had problems with the owners, the permissions and access rights but have finally fixed (see my post - http://answers.microsoft.com/en-us/windows/forum/windows_7-security/how-do-i-reset-the-security-settingsuser/11d336a3-5d72-4168-98b1-f00977418c40).

  My question: how save is just go to C:\Program Data and add the items in the Start Menu for the second installation I've done. The one that is currently contained in C:\Program Data. I need to change the Windows registry too?

  Thanks for the tips. I need her and don't want to ruin things once again. BTW, I'm running Windows 7 Pro 64 - bit SP1. I never realized that Windows 7 applies a strict policy of ACL (Access Control List) and now I'm a little more careful.

  See you soon.

  Cmaker3

  Good installers you ask if you want its application shortcuts visible to all the users or just for the current user. Shortcuts are then placed according to your answer. If your installer does not ask this question then you can fix things later by adding or removing shortcuts to the subfolder of program data. It is a matter of convenience, not 'security '. The presence or absence of a shortcut has no effect on the functioning of Windows.

  There is no need to hack the registry when you place a shortcut.

• Help adding textfield with drop-down list selects

  I have a PDF with a drop-down list field called "SoftwareList" with a default value of "Select the software" and a text field called 'SelectedSoftware '. You can freely type in the text field to communicate your needs, or choose the menu drop-down. I want to add in the text field, which is selected in the drop-down list each time. I had the following script to fix this as a custom text field calculation script:

  If (this.getField("SoftwareList").value! = "Select software")

  {

  this.getField("SelectedSoftware").value += this.getField("SoftwareList").value + «»

  }

  The problem I have is that it will continue to add to the text box with everything that was selected last in the drop-down list when you click on other fields in the form, such as check boxes. I tried this put on different actions both at the key sequence in the Properties tab of format, but did not work there. I added the following line, which helped, but it is still a click of the addition until it changes, duplicate the last pick:

  this.getField("SoftwareList").value = "select the software."

  Appreciate help with this.

  I would like to use the script validation custom from the drop-down list. You can use something like this:

  If (event.value! = 'Select Software') this.getField("SelectedSoftware").value += event.value + ",";

  To ensure that the update as soon as a selection is made to check the option to validate the selected value immediately under properties of the menu drop down, tab Options.

• on the drop-down list item event listener

  Hello

  I would like to display ToolTips, once the user holds the mouse on an item from a combobox open.

  If you open the drop-down menu of the combo box, you will see a list of items/ofelements. Each of them can be accessed for example viamyCombo.getItemAt (0).

  It seems to me that I don't get an object with property adata and label. But I think it takes more than that, becausewhen you rest your mouse over a subitem, it will be highlighted. ThisMeans that there is a listener of events on this very simple question. Sohow can I do this?

  myCombo.getItemAt(0).addEventListener(MouseEvent.MOUSE_OVER, ShowToolTip); //impossible
  
  function ShowToolTip(evt)
  {
    trace(evt.currentTarget.label);//stub action
  }
  

  Thanks in advance.

  Gilzad

  If you are looking for the component in the help documents, you will find all the events associated with this object.  If your drop-down list is a component ComboBox, there events such as what you seem to want to have, itemRollOver and itemRollOut, as well as an example of the use of their.

• How are added as a drop-down list in the printer options to create a file PDF Adobe Acrobat?

  How can I add adobe acrobat in the drop down menu the option to printer on my win7 system?

  Original title: create PDF files

  Also: Free Office, Open Office, Microsoft Word (versions), and Word Perfect will save in the form of pdf files. For example, you can create a document save as a pdf or open an existing document, change if you wish and save as PDF.

  Tom Ferguson

• Access to a drop-down list item

  Hello

  I have a drop down list in my application. I did it in my QML file. Now, by clicking on a button in the page, I get a pop-up asking for confirmation of the issue, I selected in the drop-down list. How can I get the item I selected in the list and post it? can anyone help pls

  Thank you

  without brackets. This is a property, not a function/method.

• Removal of long list of drop-down list items quickly (ss4)

  I have LiveCycle Designer ES4. I often have a long list of list items in my items from the drop-down list. I want to know if there is a quick way to remove all the items in the list (field tab). I have one at the time a click and remove one at a time. Is there a faster way?

  You can use my macro to create dummy texts.

  Just to empty the text field in the Flex dialog box and click OK, to remove all the values in a drop-down list.

  LiveCycle blog: Lorem Ipsum Generator Makro / / Lorem Ipsum Generator Macro

• Count the number of drop-down list items based on the selection

  You will need to get an "account" (in the fields of totals at the bottom) of each of the values/items selected in the drop-down "ddClassification". My drop-down fields are labeled ' ddClassification.0, ddClassification.1... etc.
  
  

  Should a loop be involved? Been looking around for the answers but can't really find anything. The values in the drop-down list 'ddClassification' are 'Choose', 'Major', 'Minor', 'OBS', 'OFI '. If I could just get help on one of the "total" fields (for example perhaps the total large field) first then I could go from there. All THE HELP is APPRECIATED! Thank you!

  
  I have attached a screenshot and here is the link for the form: Dropbox - ASSESSMENT_NOTES.pdf
  

  Yes, this requires a loop. Here's the Basic code structure, which you can use for the total key, for example:

  var total = 0;
  for (var i=0; i<=4; i++) {
      if (this.getField("ddClassification."+i).value==4) {
          total++;
      }
  }
  event.value = total;
  

  Place this code in the script to custom calculation of 'txtMajor '.

  Edit: Name of the field max adjusted from 5 to 4...

  Edit #2: Also adjusted the value of "Major" in the value of exports 4...

• Disable the added System Menu items

  Hello world

  I had quite a delicate question maybe someone can help me...

  When add MenuItems in Blackberry applications through your app, is there a possibility to disable these MenuItems If a specific form is currently not open, or if the application is currently not open?

  If so, please specify...

  Thank you

  I suggest that you use a utility for that method for example static in your main class.

• comboBox - browse the drop-down list items?

  I need to subdivide a large list of items in a comboBox in small groups in Flash. Is there anyway to loop through the elements and set the background color of you of each element a value in the dataProvider?

  I can run through the loop using myPoS_combobox.dropdown

  var ddList = myPoS_combobox.dropdown

  for {(var propertyName in ddList)

  trace (ddList [propertyName])

  }

  But I can't seem to get the individual items, much less change their properties.

  Thank you!

  If you want to change the background colors in the part of the list of the combobox component, you will need to use a cellrenderer class: http://help.adobe.com/en_US/ActionScript/3.0_UsingComponentsAS3/WS5b3ccc516d4fbf351e63e3d1 18a9c65b32 - 7fd4.html

• Reading JSON file based on the selected drop-down list item

  I have little code shown below.

  I'm trying to read data from a JSON file based on certain criteria, in this case all the suburbs on a territory
  

  I can do that quite easily in a liquid hard coding the territory, however, I want to use the value of the < select > option

  I understand that this can be achieved with JavaScript, is it possible otherwise?

  < select id = 'territory' >

  < option value = "xx" >--please select--< / option >

  < option value = "CBD" > CBD < / option >

  < option value = "North" > North < / option >

  < option value = "South" > South < / option >

  < / select >

  {model module_json json="/_System/shipping/shipping.json" = "" = "shipping" collection "}

  < select id = "suburbs" >

  < option value = "xx" >--please select--< / option >

  {% for section in shipping.territory %}

  {% If the element.} TERRITORY is '< value on top of select >' %}

  < option value = "{{point." POSTAL CODE}} "> {{point." SUBURBS}} < / option >

  {% endif %}

  {% endfor %}

  < / select >

  Hi Craig,.

  You can skip liquid altogether and use JS to get the values you need for json.

  If you want to use liquid you need to load the last part with AJAX/XHR to enter the selected value.

  1. create a new file suburb.html and ajax request after #territory selected with the option as a parameter:

  URL: suburb.html? = north shipping

  2. the suburb.html file would be:

  {assign = globals.get.shipping-% selectedTerritory %}<- this="" will="" have="">

  {model module_json json="/_System/shipping/shipping.json" = "" = "shipping" collection "}

  --Please select--

  {% for section in shipping.territory %}

  {% If the element.} TERRITORY is selectedTerritory %}

  {{point. SUBURBS}}

  {% endif %}

  {% endfor %}

• How to eliminate 'stirring' when the cursor passes over the menu item?

  I am building a small site, but when I open the site and click on a menu item, the wiggle elements and its almost impossible to put my cursor on one of the drop-down list items. It's the site if this is useful: oamasters.com. I inserted a standard Spry menu bar to create this.

  Thanks for any help you can provide. I am new to Dreamweaver so I hope that I did something really stupid to cause this.

  Betty

  My best guess (and note the I'm not very good at CSS) would be that it's
  having trouble with the changing text size:
  
  ul.MenuBarVertical ul
  {
       margin: -5% 0 0 95%;
       padding: 0;
       list-style-type: none;
       font-size: 100%;
       position: absolute;
       z-index: 1020;
       cursor: default;
       width: 8.2em;
       left: -1000em;
       top: 0;
  }
  
  ul.MenuBarVertical a:hover, ul.MenuBarVertical a:focus
  

  {
       background-color: #33C;
       color: #FFF;
       font-size: 18%;
       border-top-color: #FFF;
       border-right-color: #FFF;
       border-bottom-color: #FFF;
       border-left-color: #FFF;
  }
  

  
  Just a guess, but you might want to try experimenting with that.
  

• How can I do to if a menu item exists, doesn´t repeat menuItem when I install another version of the app?

  Hello

  I m developing an application printing email and I want to put a menu item in the emails with the option 'print with... '. ». I use this:

  PrintByMenuItem myMenuitem = new PrintByMenuItem (0);

  ApplicationMenuItemRepository.getInstance (.addMenuItem (ApplicationMenuItemRepository.MENUITEM_EMAIL_VIEW),
  myMenuitem, ApplicationDescriptor.currentApplicationDescriptor ());
  ApplicationMenuItemRepository.getInstance (.addMenuItem (ApplicationMenuItemRepository.MENUITEM_EMAIL_EDIT),
  myMenuitem, ApplicationDescriptor.currentApplicationDescriptor ());
  ApplicationMenuItemRepository.getInstance (.addMenuItem)
  ApplicationMenuItemRepository.MENUITEM_MESSAGE_LIST, myMenuitem, ApplicationDescriptor.currentApplicationDescriptor ());

  My application has two versions, with ads or no ads. When the user to install the first version and then they want to install the second version, the application will overwrite and will be only one application in the device.

  The problem is that when I install the second version, the menu item 'print with... '. ' appears twice. How can I do to if a menu item exist in enamel, doesn´t repeat the menuItem?

  I ve tried using removeMenuItem before adding the menu item with:

  ApplicationMenuItemRepository.getInstance (.removeMenuItem)
  ApplicationMenuItemRepository.MENUITEM_EMAIL_VIEW, myMenuitem);
  ApplicationMenuItemRepository.getInstance (.removeMenuItem)
  ApplicationMenuItemRepository.MENUITEM_EMAIL_EDIT, myMenuitem);
  ApplicationMenuItemRepository.getInstance (.removeMenuItem)
  ApplicationMenuItemRepository.MENUITEM_MESSAGE_LIST, myMenuitem);

  But doesn´t works.

  Thank you.

  This is not how it would work production / the device. After restarting the device, the menu item will be deleted from the repository, and you will have a menu item.

  However, if you leave your app and try again (if you save the menu items at the application startup) the you'll thus duplication. If this isn't the case, then you should not worry.

  If this is the case, then I suggest your store a veriable TERM as a check to ensure no duplicates.