Adding a new language in EBS - VISION (12.1.3)

Similar Questions

• We have the license to add the new language to EBS R12

  Hi all
  
  We are on R12 (12.1.3), it was installed with the English language by default. We wanted to add Spanish and Portuguese languages to the system.
  I went through the steps that contains generating manifest file and get a patch custom from Oracle.
  
  Here, we take the additional license of Oracle to add these languages?
  
  Thank you
  Bharat

  There is no impact/licensing requirements for the addition of new languages to an existing installation of the EBS

  HTH
  Srini

• Adding an additional language

  Hi all

  Follow this doc: how to add A new language in R12 (Doc ID 1511692.1()

  So ADADMIN running:

  ATTENTION: All workers have failed or are pending:

  Failed: File ICXNLINS.sql worker 1.

  Failed: File AZNLINS.sql worker 2.

  Failed: File BNENLINS.sql worker 3.

  Failed: File FNDNLINS.sql worker 4.

  Failed: File ALRNLINS.sql worker 5.

  Failed: File AXNLINS.sql worker 6.

  Failed: File SHTNLINS.sql worker 7.

  Failed: File FANLINS.sql worker 8.

  Failed: File PERNLINS.sql worker 9.

  Failed: File EAMNLINS.sql worker 10.

  Failed: File PAYNLINS.sql worker 11.

  Failed: File FFNLINS.sql worker 12.

  Failed: File DTNLINS.sql worker 13.

  Failed: File FTENLINS.sql worker 14.

  Failed: File SSPNLINS.sql worker 15.

  any ideas?

  Thank you

  I added sessions SIMULTANEOUS increased in DB params and the success of the completed works.

• Add new languages in R12.1.3 Italy, Spain and Serbia

  Legends of dear,

  I hope that I can add the following languages

  1. the Italy

  2. the Spain

  3. the Serbia

  So I'll test it in our instance VISION. As referring to the following documents

  1. how to add a new language in R12 [Article ID 1511692.1]

  2 R12.1: Oracle Applications NLS Release Notes, version 12.1 (Doc ID 788053.1()

  3 asking the translation synchronization Patches (Doc ID 252422.1()

  Check the following things

  1. we need to add the instance version SERBIA should be 12.1.3.

  2. to support more than 1 language character set should be UTF8 as recommended by oracle. Select the value from nls_database_parameters where parameter = "NLS_CHARACTERSET"; -> AL32UTF8

  3 base language must be AMERICAN or U.S. Language_code SELECT | ',' FROM fnd_languages WHERE installed_flag IN ('B', 'I'); -> U.S.

  4 AD_PATCH_SET level - ran $AD_TOP/sql/adutconf.sql

  AD

  Shared

  12.0.0 R12. AD. B.3

  March 26, 2009

  I hope that the upgraded AD patch is ok that "R12.» AD. "A.1"

  Still to do:

  5. application of TSP to generate the manifest and download the TSP.

  6. apply Patch TSP

  There are other things to check as NLS or MLS?

  At my right understanding and am the rest of the sequence is good or bad? Please correct me if am wrong? Is there a step by step or sequential approach to follow?

  Thank you

  Knockaert

  karthiksingh_dba wrote:

  Wow Hussein,

  Thank you very much for your detailed response. I downloaded the manifest and TSP is downloading now, for ITALIAN.

  You are welcome!

  Q:

  1. we have many reports and custom, forms do we need to change it manually for each? Or how is it possible?

  Please see (NLS Frequently Asked Questions (Doc ID 399789.1)) - 21. How to customize the translation?

  Thank you

  Hussein

• My MacBook Pro was built in mid-2009, I understand that I won't be able to get the next Sierra of OS.  I just put a new hard drive 700 GB, more I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars. What I need to by

  My MacBook Pro was built in mid-2009, a 2.6 GHz, 13-inch, I just put a new hard drive 700 GB and I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars.

  I understand that I won't be able to get the next Sierra of OS. I need to by a new Mac?

  Talk to the people the more I would get if I turn in I'd get is about are about $ 100 million.  Please tell me it isn't so.

  If you want Siera you will need a new Mac, but you can continue to use the old one as long as you want.

• Added the new computer but lost all favorite settings on old. I need new account keep different settings on both?

  My laptop (i5, running Win 7) is my workhorse computer that had all my favorite settings stored. I added a new office (AMD, Win 8.1) that will be used as a multimedia entertainment unit, but when I connected the cable to install FireFox it replaced all the settings in my laptop with the new computer. How can I keep the different settings on each computer? Must have 2 different accounts to be able to do this? I have now lost the web address for some of my sites, so it's quite painful. The "recently marked with a bookmark" folder is the main problem, because it is where I was monitoring my sites.
  Computer LAPTOP is Acer Aspire i5 & Win 7 runs the modules listed below.
  DESKTOP is a Medion with an AMD 3.8 GHz Turbo & Win 8.1, with the new version of the FF browser.
  Auto Firefox installed the same modules as the laptop, but I will change those & don't want to FF to automatically install the same on both computers. How can I separate them?

  See this - https://support.mozilla.org/en-US/kb/how-do-i-choose-what-types-information-sync-firefox

  You can only select favorite and maybe passwordsand uncheck other options of data type.

• I added a new apple ID. He continues to show former apple ID what me I forgot the password.  What should I do?

  I added a new apple ID. He continues to show former apple ID what me I forgot the password.  What should I do?

  Bought/downloaded content by one that Apple ID is linked forever, and in the case of applications will always require to update.

  Your best bet is to try to recover the password for it.  Go to http://iforgot.apple.com and try to get it back.

  If you forgot your Apple ID - Apple Support password

• Satilite M40X - adding a new processor

  I was wondering how I would go about adding a new processor in my laptop. I've never done anything like this before and I was wondering how I would go to do. Also, I still actually have to buy a new processor so if you have any suggestions, or if there are problems cause I should knowledge about it would be great if you could tell me.

  In your case, I won t exchange the CPU.
  It is not really important because the price of a new processor is high and you get much more performance.
  The BIOS does not always work with the CPU and Toshiba doesn't supports this service.

  I started an article on Exchange CPU/GPU:
  http://195.182.196.33/KB0/FAQ7A01ZW0007R01.htm

• RN104 - added 4 new 4 TB drives. 2.5 days of resynchronization. Start copying files, or wait until it's done?

  I think I've drunk mostly in the title...

  I just added four new 4TB discs (WD40EFRX) to a vacuum RN104 running the latest operating system. (6.4.0)

  At the start, he started a resynchronization estimated at about 70 hours.

  Is a resynchronization required on an empty set of disks? (If not, can I cancel?)

  If I have to re-sync, can I go ahead and start writing some stuff on the drive is Resyncing? (I'm willing to take whatever the performance hit, there could be.)

  Thank you!

  The synchronization is made at the level of the block of readers, even thoug hthey are empty, they still need to be resynced.

  If it's critical to copy the data across, you can start adding data while resynchronization is in progress. Although you will take a significant performance hit, synchronization and the writing speed. AND, you won't have the advantage of reduncancy until the end of the resynchronization.

  Unless it's critical data, my suggestion would be to wait until the Resync is finished, and THEN copy the data across.

• Added the new kingston 256 GB ssd to my MBP 13 "2012

  I added a new ssd 256 GB kingstone to my MBP 13 "2012 and it worked fine for a month, today it has frozen and restarted without reason. and there is a folder with a questionmark in the middle of the screen icon. I once git to start again and now it stoped working again. Can any ideas on how I fix this?

  You can contact the manufacturer and see what are the provisions of the warranty.

  Start the recovery partition and run disk utility > first aid.

  If there is no problem, remove the SSD and install it in a closed Chamber.  Plug it into the MBP via USB and see if it will start the MBP.  If so, the internal SATA may have to be replaced.

  Ciao.

• problem to install the new language of the interface

  When I try to install the new language pack of interface on my win xp SP3 this message, it is displayed:

  "The windows XP MUI version seems to have been installed on this system. Persian interface pack for Windows cannot be installed on this computer.

  What should I do to install?

  Hi amirtourehei,

  Basic language and edition required to install the Persian windows interface pack is English

  1. to install and use the Interface Persian Language Pack (LIP), you must add the Persian language support to the operating system, and then install the fonts. The following section describes the steps necessary to accomplish these tasks:

  a. open regional and Language Options of the Control Panel, then go to the languages tab.

  Note: If you are using the category view, click on Date, time, language and Regional Options, and then click regional and Language Options and then go to the language tab.

  b. Select the option install files for complex scripts and languages from right to left (which includes the Thai), then press the OK button.

  Note: Please have your Windows CD ready, because you may have to copy some files in your system

  2. always make sure that the underside of update is installed on your computer:http://www.microsoft.com/downloads/en/details.aspx?FamilyId=D3F8F6AB-84F1-4095-8709-DF509B1BEE22&displaylang=en

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Adding a new hard drive on e9180t

  Hi, I have e9180t and I'm considering adding a new hard drive.

  Can my office manage 3 to/6.0 GB/s 64 MB Cache SATA internal hard drive?  I get my full performance out of it?

  I read the possible combinations (http://support.hp.com/us-en/document/c01817977 specification page

  Is there a limit to the capacity of the hard drive?  (up to 2 TB)?

  Can handle a 6.0 GB/s transfer rate?

  I currently have 2 hard drives in the following:

  1 TB - Barracuda (st31000528as) 7200 RPM 32 MB SATA 3.0 GB / s
  500 GB - Maxtor DiamondMax 21 (STM3500630AS) 7200 RPM 16 MB SATA 3.0 GB/s

  If I buy 3 to/6.0 GB/s hard drive and use it as a hard drive, will I use these two hard drives as a secondary hard drives?

  Thank you!

  For those who might be interestd, this is what I found after some digging and calling:

  Since the motherboard that comes with e9180t (ipmtb-tk) is SATA 2, its speed is limited to 3.0 GB/s.   When 6.0 GB/s hard drive is connected, the speed will slow down to 3.0 GB/s.

  You can only use the full 3 TB capabity if your motherboard bios has opportunity to support UEFI interface.  However, most of the motherboards built before 2011 doesn't have this option.  ipmtb-tk is one of them.  However, there is a work around.

  1. go in the bios and check that the interface is set to AHCI (non-RAID).

  2. when the disk partition is loaded, you will be able only to the 2 TB partition.  another partition 750Go seems a separate partition that you cannot change.  Partition the 2 TB the way you want to and install Windows 7 on it.

  3. after that excavation is done, download Seagate Disk Wizard.  Later one of their homepage did not work, however.  You must download this one:

  http://www.seagate.com/staticfiles/support/downloads/discwizard/DiscWizardSetup-14382.en.exe
  

  I don't know why they don't have this default link on their home page when you go to download DiscWizard.

  Once the wizard disk is installed, it will pick up the 750Go that you weren't able to before partition as a new drive and now will allow you to partition.   (Keep the MBR instead of TPG setting, format it to NTFS)

  Once you partition using the tool, Viola!  a new drive with 750 GB of space has been added as a new drive.

• Class not found exception after adding a new image in the folder resources.

  The app works perfectly well on the Simulator and the device. After adding a new set of images, he began to show in every race, on the Simulator and the device, a class not found exception.

  When you try to delete some images to find the cause, I get different classes not found when executing. Compilation and packaging the application generate warning or error. They even get signed. Some of the classes are not exception I get:

  Java.lang.StringBuilder

  NET. RIM. Device.API.UI.UIApplication

  I'm guessing this has something to do with the size of the total image, since the size of each range image from 100 KB to 300 KB, and we talk about only 25 or 30 images in total. Adding image outside of the 'res' folder does not generate the error, but the image is not added to the final files.

  In addition, this application is not large, but when compiling and packaging of the app, it generates and signs 125 cod files. Is this normal?

  I use Eclipse 3.6 (Helios) and BB SDK 5.0.0.25 won win 7

  Any help will be appreciated. Thank you.

  Have you seen this?

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/the-maximum-size-of-a-BlackBerry-smart...

  I would recommend that you download these kinds of resources and put them on the SD card if you take a storage capacity that users will want to keep available for email and others.

• Instance of EBS vision

  Hi guys good morning all, I have to install a single instance of EBS vision, it is possible? and if it s possible, can someone tell me the measurements for easy installation?

  Kind regards...

  N ° in any case is the vision in real time for training, POC, R & D. His apt for you. You can still join forums for any questions. All the best.

• Error when adding a new section with SQL in application websheet

  Get the following error while adding a new section with inside on an existing page SQL query in websheet request.

  ()This is the first time I tried to add a SQL query to an article in a websheet. Is that suppose to work?)
  
  

  

  You can see that access SQL and PL/SQL is already enabled for this application websheet.

  
  

  

  After trying many things, I found the 'access SQL and PL/SQL' must be enabled at the level of the APEX INSTANCE also.

  This is how to do it:

  (1) connect APEX as a forum admin with the following credentials:

  workspace: internal

  user ID: admin id defined during the installation of the apex (usually, it will be admin only)

  password: admin password set during the installation of the apex

  2) click manage the Instance > feature Configuration

  (3) select Yes to enable access SQL in Websheets