Adding IP addresses

Similar Questions

• Problem adding email address to the site 'Manage your Apple ID'

  I want to add my XYZ e-mail address in the section "reachable to the ' site ' manage your Apple ID. However, I get the following message: "this e-mail address is already in use with another apple ID".

  Note that I have my email set up as my 'rescue email' XYZ on my site ' manage your Apple ID ".

  Could it be the cause of the problem? In other words, the rescue email CAN NOT be used in the section "can be reached to the?

  If it's NOT a problem, then why am I allowed to use my e-mail XYZ as my 'rescue email' address for my Apple ID site, even if he uses another apple ID!

  How can I know what another apple what ID?

  Very confusing to say the least...

  Furthermore, I tried to find a community called 'Apple ID' or 'Messages' of this post "help message" but couldn't find it. "FaceTime" is the closest to what I'm looking for. Please redirect me to the appropriate site if necessary. Thank you!

  Hello Michael,

  Thank you for using communities of Apple support.

  I see you are trying to add an additional email address to your Apple ID. If you already have an address assigned as your email of relief, that is probably why you can't add it as an additional e-mail address. See this support article for more information about Apple ID addresses: on your Apple ID email addresses

  If you want to change the emails, you can replace the recovery email address and use it as an additional e-mail address.

  Best regards.

• Adding new address mail to permit red list - error 551

  Hello

  I just tried to add new e-mail addresses to the list of senders and always got error 551. I tried yesterday and today several times with different browsers.

  Please take a look at the screenshot (in German).

  

  Thank you!

  Hello

  Please check the solution from the following link:

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile-printing-and-ePrintCenter/error-551/TD-p/2756749

  Kind regards.

• Adding new addresses to the eprintcenter

  I created my printer HP Photosmart 5520 in the eprintcenter.  Set it to receive emails from named email addresses, at the beginning with my email address.  It works very well.

  Attempt to add additional e-mail addresses I can't find where on the screen eprintcenter to do.  He invites me to sign, I do, he says and then click on the button "go to HP the.  It just takes me to the home screen again.

  EdHadfield wrote:
  

  This exactly what I've done

  Hello

  Now, please switch to another browser or clear the cache, history and try again.

  Kind regards.

• Area basic FW: adding secondary address to an interface

  If you configure a secondary IP address on an interface - say int fa0/0 zone "inside" - who immediately come into effect for traffic on this subnet? I'll work on a network where they have installed too small a subnet on the inside and I would like to facilitate the migration by putting on a secondary IP address and let them renumber all their stuff etc. Then as the last brief step I'll nuke address main and primary school.

  Would this work? Thank you.

  Once u put the secondary it will enter into effict

  but I think for nating, you need to do to recharge

  or rstart sessions

  Good luck

• Fake email received? Rescue e-mail address Apple ID

  I received an email from the so-called [email protected]. He claims that I recently added my address to e-mail from Apple as a conference entitled "rescue e-mail address for...» [my] AppleID. "I don't have such a thing. Of course the one who sent the e-mail knows my apple e-mail address. Sounds like a scam to me. I did not answer. Can anyone provide information on who is doing what in regards to this email? I've attached a screenshot of the email. If I do nothing else, at least I'll have tipped him off about the PERP here. Do you have any advice for me on any action, I have to take? I posted in the community of MacBook Pro because the list of communities given did not address my question. If you can make this available to a better audience post, then do it.

  

  Here is more information on this topic: http://www.apple.com/legal/more-resources/phishing/

  Just send a report.

• Add new email tool bar and the address button no longer appears.

  Adding email addresses and for some reason, the toolbar address and add a new address button disappeared. Without them I can't add all email addresses more.

  Press F10 to display the menu.

  Menu view > toolbar > address book toolbar

• Why won't save the addresses I enter the address book?

  Since we had Thunderbird, we were not able to add all of the addresses in the address book. Strange thing is, we added an address when we started, and the address is saved! But after that and since then, no other addresses are saved when add us them. Here's what happens: we add a new contact, enter the information and click OK. Thunderbird is always open, contact seems to be stored in the address book and can be accessed. But as soon as Thunderbird is closed and reopened, the address disappears and we are left with only only one address, that we've added when we started and nothing more. I hope someone can help with this!

  Menu (Alt + H) help > troubleshooting information
  Click the display folder.
  Close Thunderbird
  In windows Explorer open
  Abook.MAB and rename it abook.mab.old.
  Restart Thunderbird and try again.

• Can not get the address bar with Firefox - one or the other button

  With the toolbar options configured with the menu bar, bar nagigation, bookmarks bar and tabs on top
  I have no Firefox button, a full menu before the address box layout.
  If I uncheck the menu bar, I get the firefox button, but no bar address and a blank line between the tabs and the bookmarks bar

  Unchecking the navigation bar removes the empty line between tabs and bookmarks.
  

  I deleted all the incompatible modules and searched just likely culprits in: config without success. Any suggestions?

  Looks like you added the address bar and other icons of the toolbar in the menu bar and have an empty navigation toolbar.

  Use the method in the following article to drag - move the address bar and other icons on the Navigation bar - https://support.mozilla.com/kb/How+to+customize+the+toolbar

  You can also use the method of "Reset bars, tools and controls" as described in this link - https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

• ePrint loses email addresses allowed except my master e-mail

  Hello

  I opened my ePrint account and wanted to add addresses email who are authorized to print via e-print. I win and the dialog box displays all the addresses correctly.

  But when I connect again in ePrint and I want to check the addresses all are gone except my main address on behalf of HP.

  What could be the reason for this?

  Thank you and best regards

  Hanspeter

  Try the procedure described below a few users have reported success.  Let me know how it goes.

  1. connect to ePrint Center.

  2. click on the senders list and add the user as usual.

  3. click on save after adding the address-do not sign of ePrint Center.

  4. then send an email to the printer from this sender you just added.

  5. once the e-mail has been received by the printer disconnect and then come back in ePrint center and check the list of senders.

• ePrint loses all permitted except address email addresses master own account

  
  

  Here's the work around that I would use when adding and registering on the list of senders allowed in ePrint Center. I had people report success using this method. I hope it helps.

  1. connect to ePrint Center

  2. click on the senders list and add the user as usual.

  3. click on the Save icon after adding the address - do not sign of ePrint Center.

  4. then send an email to the printer from this sender you just added.

  5. once the e-mail has been received by the printer disconnect and then come back in ePrint center and check the list of senders.

• How can I retrieve an alternate email address?

  I created a secondary, although e-mail only extremely exhausted and don't remember the connection. I do remember the password and know that I put my main account in the email box.

  Is it possible to access the user for an email account ID? If so, how do I?

  Any help at all would be appreciated.

  It is a real guessing game. Here is my picture:

  1. You have a Microsoft Account
  2. You have been asked to add a secondary email address what security codes and notifications could be sent.
  3. You created a new account at signup.live.com and added his address to your primary Account Microsoft.
  4. You forgot from this secondary email address.

  If it's something like the real situation, start an InPrivate session in Internet Explorer (open IE and press Ctrl-Shift-P). Copy this URL into the address bar: https://account.live.com/ManageAssocIds and sign in with your primary Account Microsoft. This will show you a list of the e-mail addresses associated with that account.

• Smartphone blackBerry, adding Gmail to Storm - problem

  PROBLEMS connecting GMAIL in the storm.

  By choosing Gmail, email facility

  I can't configure Gmail on the storm. It is a choice, then it shgould work. Technical support was not able to help.

  When I selected gmail it then asks for my username and password, then when I click nextI get the message after a long period of trying to connect to messaging settings, "your device had a problem connecting to the server, try again" I clicked retry it finally answers the same thing again. Last night and today I got was "We don't have set up [[email protected]]."  Help, please.

  Search Google help I found a script for adding Gmail to a Blackberry, but it does not mention the storm. When I try to leave out the password as it recommends for the establishment myself, all I get is a message that says password is required, and it doesn't let me do anything else.

  Here's the script of Google for Blackberry.

  To configure IMAP for your BlackBerry access, simply follow these steps:

  1. Enable IMAP in your Gmail settings.
  2. From your BlackBerry home screen, select the BlackBerry Configuration icon, and then choose Personal Email Set up. (On older devices, look for the Personal Email Setup icon.)
  3. Select personal email configuration.
  4. Agree to the terms and Conditions.
  5. On the page "Account Setup Email", enter your full email address (including the ' @gmail.com ' or ' @your_domain.com '), but leave the ' password: "field blank. Select Next.
  6. You will see a screen that says: "We don't have set up [[email protected]]." Select I'll give you the settings to add this email account, then Next.
  7. Select Internet Service Provider Email (POP/IMAP), then Next.
  8. Select I'll give you the settings to add this email account, then Next.
  9. You will see "The BlackBerry Internet Service could not configure [[email protected]] email address." Select the provide settings to continue.
  10. In the "user name:", enter your full email address (including the ' @gmail.com '). Google Apps users, enter your full email address at your domain. Then enter your password in the ' password: "field.
  11. In the ' mail server: "field, enter 'imap.gmail.com', then select Next. Google Apps users must enter the name of the server provided; do not add your domain name in this step.
  12. If IMAP access has been configured successfully, click OK.
  13. Below your newly added Gmail address, select Edit.
  14. Select Advanced settings at the bottom.
  15. Make sure that the port is set to ' 993' and 'Use SSL' is set to 'yes '.
  16. Select Save.

  It should now be a new icon in the box to the letters on your BlackBerry home screen labeled with your Gmail address. Once you see this icon, follow these steps to ensure proper setup:

  1. Open box icon.
  2. Open the menu by pressing the wheel or the BlackBerry menu button and select Options.
  3. Select email reconciliation.
  4. Check the following settings:
     • Delete on: mailbox & Pocket
     • Wireless reconcile: on
     • On conflicts: mailbox WINS
  5. Select Save.
  6. Check our customer recommended settingsand adjust the settings of your client as needed.

  I have gmail and it comes through my storm, no problem.

  Go here: http://na.blackberry.com/eng/support/blackberry101/setup.jsp#tab_tab_email (they appear towards the bottom of the page) to find your carrier's Web site, then go to the website and create an account.

  Once you're connected, you can create/edit/delete emails from here.  You can also create e-mail filters (for example, gmail, no download of mail sent).

• How to add an external IP address to a split tunnel?

  Hello

  I've set up VPN access on my ASA box as customers use a split tunnel so that only on our internal network traffic through the tunnel. Now, I need to add an external IP address to this tunnel. Is this possible, and if so, how can I achieve that? Just add the address to the list of tunnel network does not; If I do this, the client cannot connect to the external address at all.

  Can anyone help?

  Cheers, Georg.

  Hello

  Will need to see some configurations.

  Usually incoming VPN traffic bypasses ACL interface. If you have the default setting, you will need to allow traffic to the pool/subnet VPN server. Unless of course the server already has a rule that allows traffic to a "some" source address.

  Also a likely problem may be your NAT configuration.

  The local IP address of the server the public IP address is included in the current NAT0 configurations for the VPN connection? If yes then which will probably cause problems for connections to its public IP address. Traffic could be abandoned due to a RPF NAT audit that basically checks the NAT that corresponds to the traffic in the opposite direction.

  Therefore to confirm the above things, or share configurations, then we can do it.

  To my knowledge by adding the address IP of the Split tunnel should naturally also be taken.

  EDIT: The number of the station 6000

  -Jouni

• Tunnel of Split VPN Setup ASA to force inside the tunnel for single address

  Hi all

  We have an ASA with IPSec VPN facility to addresses Internet of Tunnel from Split.  We have an Internet address that must come from the external interface of the ASA.  I have added this address to the list of split tunnel and confirmed on the client that is the road to the tunnel, but I'm not able to get to this address via the VPN.

  How the ASA to allow this unique Internet address to come via the VPN and route back on the same interface to the Internet and the return traffic to back up in the client VPN tunnel.

  I need to get to the address is 213.92.42.118. Here's the config relavent (let me know if I left anything):

  interface GigabitEthernet0/0
  nameif outside
  IP 1.1.1.1 255.255.255.0
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  name 10.80.177.0 VPN_Pool
  Outbound_Ports tcp service object-group
  port-object eq www
  access-list extended sheep allowed any ip VPN_Pool 255.255.255.0
  access-list extended users allow icmp a whole
  access-list extended users enable a tcp
  access-list extended users allow udp a whole
  users_splitTunnelAcl list standard access allowed 10.0.0.0 255.0.0.0
  standard access list users_splitTunnelAcl allow 192.168.43.0 255.255.255.0
  users_splitTunnelAcl list standard access allowed 192.168.40.0 255.255.255.0
  users_splitTunnelAcl list standard access allowed host 213.92.42.118

  FWOB list extended access permit tcp any any Outbound_Ports object-group

  Global (LUXCVGASA01e) 2 1.1.1.1

  NAT (LUXCVGASA01i) 2 10.0.0.0 255.0.0.0
  NAT 0 access-list sheep (LUXCVGASA01i)

  Any help is appreciated.

  -Jeff

  Hi Jeff,

  Just had a chance to look through the Setup and I guess that configured nat is incorrect.

  access-list extended sheep allowed any ip VPN_Pool 255.255.255.0
  NAT 0 access-list sheep (LUXCVGASA01i)
  NAT (LUXCVGASA01i) 2 10.0.0.0 255.0.0.0

  Global (LUXCVGASA01e) 2 1.1.1.1

  The access-list says sheep that ALL traffic goes to the pool of the VPN to go UN-natted. So, when you try to access the public ip address via the tunnel VPN, the traffic the ASA, ASA then performs a search destination NAT and matches the nat command "nat (LUXCVGASA01i) 0 access-list sheep." If the ASA detects a destination NAT translation, it will bypass route search and uses the destination NAT translation to determine the output interface (in this scenario, the output interface is LUXCVGASA01i.

  So, to resolve this problem, change the acl sheep from "any to VPN_Pool 255.255.255.0" inside"to the network VPN_Pool 255.255.255.0.

  clear xlate and re-initialization of the tunnel, and this should solve the problem.

  Let me know if that answers your query.

  Kind regards

  Manisha masseur