adding ram to Pavilion 6449

Similar Questions

• Mac Pro early 2008 adding ram problems

  I recently added RAM to my Mac Pro early 2008. The Mac Pro recognizes only 4 of 8 memory locations. I moved the slots and moved the memory and all slots and all the memories are good. No matter where I put them, or what memory I use, the Mac Pro will see 4 of 8. Any suggestions? Yosemite run 10.10.5, trying to fill all 8 locations with 800 mhz 2 GB DDR2 FB - DIMM.

  Ron

  How are new?

  Where have you bought the new?

  All new are identical?

  All the 'old' are the same?

  What is the size of the old and new?

• LaserJet2300dn: "disk not initialized" on HP4240N after adding RAM

  Hello

  After adding RAM 48 MB on my HP2300DN, on the control panel appear 'uninitialized disk '.  I tried to do a cold reset and replace DIMM Slot2 and Slot3, but without success.  Any help would be really appreciated.

  Specifications:

  Printer: HP LaserJet 2300DN

  1 DIMM Slot:

  Side 1: 8 MB Flash

  Side 02:48 MB of SDRAM

  DIMM location 2:

  Side 1: 1 MB of ROM memory

  Side 2: empty

  DIMM location 3:

  Side 1: 8 MB Flash

  Side 02:48 MB of SDRAM

  EIO 1: HP JetDirect J4169A

  RAM DISK storage: 45Mo

  FLASH storage capacity: 3 MB capacity

  Total memory 96 MB

  Hard drive: No.

  Model number: Q2475A

  Dmitry

  You probably confuse the printer. You seem to be using 2 DIMMS that are 48Mo and each also 8 mb flash. These chips contain the firmware in the flash section and the memory in the other. Since you're probably using a chip LJ2300 another dimm, you confuse the printer with 2 firmwares. You must use a barrette of memory 32, 64 or 128 in the 3rd slot. Only 1 chip 8/48 MB can be used in this printer.

• Flickering screen 17 Alienware r3 after adding ram

  I have a new r3 Alienware 17 it came with 8 GB of ram, I just added ram 2x16gb 2133 corsair.  When I put power back on the screen started to Flash, it is very pronounced in the office when I open the start menu.  I checked the BIOS is updated.  I put the old RAM in and flicker went.

  I checked that this computer is rated for 32 GB, so I wonder what I do wrong or if I need to update other elements to make this work.

  Any help is appreciated!

  Could be many things, software packages to the specifics of the hardware. We usually use Kingston, Toshiba, Samsung and Hynix.

• Inspiron 530 - adding RAM

  Hello

  I want to buy a memory to my inspiron 530! Here > http://accessories.euro.dell.com/sna/category.aspx?c=uk&l=en&s=dhs&cs=ukdhs1&category_id=4325&mfgpid=1226170&chassisid=-1<- the="" 1="" gb="" module="" (28="">

  I read on documentation (http://support.dell.com/support/edocs/systems/inspd530/en/OM/HTML/parts.htm#wp1580857) when I install memory I need to remove the PCI Express x 16 card... I don't understand. I thought adding ram was simple and all you had to do is open the case, insert the ram and secure them correctly and then close the case. Start the pc and it's done.

  I know that my inspiron 530 can have only 4 GB of ram. I have 2 GB of ram for now.

  Is there something I need to know? Is there something different?

  Dell is not offering Win7 drivers for this model. I suggest you go here and read some of the links on the upgrade to Windows 7. Run the Win 7 Upgrade Advisor first to see what it says on your system.

  Without knowing what equipment you have (for example, video card, sound card, network adapter, etc.), it is impossible for anyone to tell you exactly what drivers you need. In some cases, but not all cases, Vista 64-bit drivers can work. The Vista 64 drivers are here. (Confirms that he says again Vista 64-bit upstairs when you load the page!) And if you use your Service tag (do not post here!) you can find a list of drivers installed Dell, so at least you will know what hardware you have, but keep in mind these drivers for Vista 32 bit.

  You can also go here for links to the hardware and instructions to install Win 7. And you can search these forums for discussions on installing Win 7 on the Inspiron 530 to see which other users may have met problems.

  Ron

• HP Pavilion 4025ew: adding RAM in dv7-4025ew

  Hello

  My concern is if I install 2 x 8 GB PC3 - 10600 DDR3 RAM. It will have an effect sufficiently better to install 2 x 4 GB or is it just useless? Is it still possible?

  Thanks in advance,

  Jacob

  AutoCAD would be one of the things that might be helped by 16 gigs but it's a moot point because the laptop cannot have 16 gigs. 8 is that the more you can install. If you try to install 16 concerts it won't start, more than likely, and if it does will be unstable.

• Problem adding RAM on HP Pavilion TouchSmart 15-b129wm Sleekbook

  OK, so I have a 4 GB stick in there from when I bought the laptop, but I thought to add more so I got some crucial. Unfortunately for me, it is not a 'door' bit convenient for me to open to access the RAM, so I have to take everything... from ahead. For the first time I put in RAM, I kinda had to put a force on the subject, you know (first time ever put RAM in a laptop), but the metal little clamps on the sides don't click so I just opened the pliers, put it in there then their closed. I said "well I hope that it works" and good thing the computer turned on and everything but when I went to the system (I have Windows 8) they say I have only 4 GB installed. I took it apart again (pain in the ass, you mind) and went out of the RAM and once more tried with the clamps snapping, of course, has not. So I decided to do the same thing and who knows what happened? THE SAME THING. OK now I'm checking the BIOS as well and he also says 4 GB so now I'm here. Please help me: c

  Data sheet:

  AMD A6 (~2.1 GHz) processor

  AMD Radeon

  15.6 screen "

  Windows 8

  4 GB of RAM (Dang it)

  Hello

  Please check if you have checked these:

  Manual: http://h10032.www1.hp.com/ctg/Manual/c03660406.pdf

  Through 2, 17 - page

  Config of RAM to use: DDR3L PC3L - 12800 1600 MHz SODIMM SDRAM

  The memory stick of low power AMD A6 accelerated processor - 4455M is of type DDR3 'L '.

  There are two slots, so you can put an another 4Gigs with the same configuration you have (e.g., ditto config), same brand would be ideal.
  Download, run this tool to know the details of RAM already present: http://www.cpuid.com/softwares/cpu-z.html

  Product details - http://support.hp.com/us-en/document/c03900498

  Go through the Page 49, 50 in the manual of replacement procedure-
  You have to get out of the motherboard to upgrade RAM it seems.
  Better communicate with HP or guy local tech since you are doing it for the first time. I do not my own, if I'm a beginner in the present.

  Concerning

  Visruth

• Pavilion Notebook 15-n204tx: ADDING RAM

  Hi all

  Can I extend the RAM of my laptop? He there wrote nothing in the specifications can I increase the RAM. How many Slots is free in this laptop? And I can then expand what RAM should I buy (see the brand and type of RAM)? I wanted to add more than 4 GB.

  Thanks in advance
  Rahul Sharma

  Yes, here is the Service Manual:

  Manual

  You have 2 slots and a 4 GB module is in one of them you can easily add a second module of 4 GB in the empty slot that I recommend, or you could actually add a module of 8 GB for a total of up to 12 concerts.

  Page 42 shows how to add it. You need the memory SO-DIMM of DDR3L-1600 bars. Let us know if you need help to find a good deal on the memory you need. Tell us the country that you live if you do.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• adding ram

  I have a Pavilion media center desktop computer. Product M8010y ggo6av #aBa. It came with Vista and has 3 1/2 RAM. I can 't find someone to tell me if I can add more to it. I have upgraded to win 7. Does anyone know if more can be added. Thank you.

  Hello:

  Here the link to the profile for memory upgrade for your model.

  http://support.HP.com/us-en/document/c00916901

  You need to install a 64-bit operating system so that Windows to address more than 4 GB of memory.

  Any version of Windows (XP, Vista, W7) you have.  As long as it is 64-bit.

• HP pavilion 15-p293na: upgrade of RAM hp Pavilion 15-p293na

  This how many RAM slots have this laptop? The amount of RAM I can put?

  Here is the Manual:

  Manual

  See page 2. It is said "some models" have 2 memory slots. Yours has one module of 8 GB to total 8 gigs. Your a hexa-core HP processor. It's actually an AMD A8-6410. Just google HP hexa-core and you will see a lot of interesting comments on marketing of HPs of this AMD processor as an HP processor.

  So, this is your motherboard:

  AMD M260 A8-6410 (2.4 GHz/2.0 GHz, 2 MB L2, 1600 MHz DDR3L, quad core, 15 W) for use with Standard Windows HP Pavilion 15 Notebook PC 762531-501

  Image from google images:

  

  Looks like 2 memory slots in the lower left corner. Given that HP is not explicit about this in the manual, it is the best we can do. Adding memory will be a huge deal requiring withdrawal of the motherboard and compromising security.

  Post back if you have any other questions. Bottom line, it seems that you could add another module of 8 GB for a total of 16, but getting there may bemore trouble that it's worth. Replace the drive dog-slow 5400 RPM with a SSD drive would be a better upgrade, but this also isn't a walk in the Park.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• 6199ee Pavilion - LX218EA: upgrade of ram hp pavilion dv6-6199ee

  can I switch from ram to my labtop hp pavilion dv6-6199ee from 8g to 16g?

  Hello

  The following link shows its specifications:

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/5082212/model/5116524/document/c02866517/

  It says clearly: expandable up to 8 GB of DDR3 memory (means 8GB max).

  But the maintenance and Service Guide says, it uses Intel processor (CPU) for this purpose, you can upgrade to 16 GB (page 5):

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/5082212/model/5116524/manuals

  Please use the right part on page 66 of the manuals or at least same specs above.

  Kind regards.

• Satellite S50T-B - adding RAM and swapping HDD to SSD

  Hello

  I recently bought portable satellite S50t-B and have a few questions about the upgrade:

  1. What is the recommended RAM to add (8 GB)

  2. What is the DVAR to add?

  3 are there instructions for adding more RAM and an SSD for my laptop?

  4. I void my warranty by installing more RAM and exchanging the current hard drive for an SSD?

  Thank you for your help

  Can you please send name of full model of your laptop? (S50T-B-xxx)

• Ram HP Pavilion Elite m9040n upgrade options

  Hi, my question has to do with what is the best ram to fill my ram slots with. I run windows 7 Ultimate 64 bit and I don't know that I can fit 8 GB total. I'm in recording music with a large number of devices. I have things like a console 003, a 11Rack, a Boss GT - 10, as well as a Piano Yamaha G-1. All are via USB except the 003 (Firewire connection).

  I have a report of sandra to take account of my diet and updates of graphics card.

  Sandra Report!

  SiSoftware Sandra

  Computer

  Model: HP-Pavilion, GN553AA - ABA m9040n

  Working Group: task force

  Host name: Marshall-PC

  User: Marshall

  Processor

  Model: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz

  Speed: 2.4 GHz

  Cores per processor: 4 unit (s)

  Threads by heart: 1 unit (s)

  Type: Quad-Core

  Built-in data cache: 4 x 32 k, the size of online synchronous, Write-Thru, 8 channels, 64 bytes

  Edge L2 Cache: 2 x 4 MB, ECC, synchronous, ATC, 16 channels, 64 byte line size, 2 son sharing

  Computer

  Motherboard: Asus Berkeley

  BIOS: FRIEND 5.13 24/10/2007

  PCI, ISA use: X - Bus PCIe IMB USB FireWire/1394 i2c/SMBus

  Support multiprocessor (MP): No.

  Advanced multiprocessor PEAK (APIC): Yes

  Total memory: 3GB DDR2 DDR3 DIMM

  Chipset

  Model: HP P35/G33/G31 processor to i/o controller

  The front side Bus speed: 4 x 267 MHz (1 GHz)

  Total memory: 3GB DDR2 DDR3 DIMM

  Channels: 2

  Memory Bus speed: 2 x 334 MHz (668 MHz)

  Bars of memory

  Memory module: Micron 8HTF6464AY - 667 7 512 MB DIMM DDR2 PC2 - 5300U DDR2 - 666 (5-5-5-15 3-20-5-3)

  Memory module: (Hyundai) to Hynix HYMP512U64CP8-Y5 1 GB DIMM DDR2 PC2-5300U DDR2-666 (5-5-5-15 3-20-5-3)

  Memory module: Micron 8HTF6464AY - 667 7 512 MB DIMM DDR2 PC2 - 5300U DDR2 - 666 (5-5-5-15 3-20-5-3)

  Memory module: (Hyundai) to Hynix HYMP512U64CP8-Y5 1 GB DIMM DDR2 PC2-5300U DDR2-666 (5-5-5-15 3-20-5-3)

  Video system

  Video card: NVIDIA GeForce 9800 GTX + (128 SM4.0 1.7 GHz, 512 MB of DDR3 2.2 GHz 256 bit PCIe 16 x 2.00)

  Video card: NVIDIA GeForce 9800 GTX + (128 SM4.0 1.7 GHz, 512 MB of DDR3 2.2 GHz 256 bit PCIe 16 x 2.00)

  Graphics processor

  OpenCL processor: NVIDIA GeForce 9800 GTX + (128SP 16 c 1.84 GHz, 512 MB of DDR3 2.2 GHz 256-bit)

  Compute Shader Processor: NVIDIA GeForce 9800 GTX + (128SP 1.7 GHz, 512 MB of DDR3 2.2 GHz 256-bit)

  Storage devices

  Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB of Cache memory): 298 GB (C (D)

  Generic-Compact Flash (USB): N/a (H

  Generic-SM/xD-Picture (USB): N/a (I

  Generic-SD/MMC (USB): N/a (J

  Generic-MS/MS-Pro (USB): N/a (K

  TSSTcorp CDDVDW TS-H653N (SATA150, DVD +-RW, CD - RW, 2MB Cache): n/a (E

  Logical storage devices

  SysReserved: 100 MB (NTFS)

  Hard drive (C : 289 GB (NTFS) @ Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB Cache))

  FACTORY (D : 9 GB (NTFS) @ Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB Cache))

  Removable disk (H : n/a @ generic-Compact Flash (USB))

  Removable drive (I : n/a @ generic-SM/xD-Picture (USB))

  Removable drive (J : n/a @ generic-SD/MMC (USB))

  Removable disk (K : n/a @ generic-MS/MS-Pro (USB))

  Optical drive (E : n/a @ TSSTcorp CDDVDW TS-H653N (SATA150, DVD +-RW, CD - RW, 2MB Cache))

  Devices

  LPC Hub Controller 1: HP (ICH9) LPC Interface Controller

  LPC Legacy controller 1: Asus F8000

  Audio device: HP (ICH9) HD Audio Controller

  Audio codec: Realtek Semi 888 high definition Audio

  Serial Port (s): 1

  Disk controller: HP (ICH9) 4 port Serial ATA Storage Controller 1

  Disk controller: HP (ICH9) 2 port Serial ATA Storage Controller 2

  USB controller 1: HP (ICH9) USB Universal Host Controller

  USB controller 2: HP (ICH9) USB Universal Host Controller

  USB controller 3: HP (ICH9) USB2 Enhanced Host Controller

  USB controller 4: HP (ICH9) USB Universal Host Controller

  USB controller 5: HP (ICH9) USB Universal Host Controller

  USB controller 6: HP (ICH9) USB Universal Host Controller

  USB controller 7: HP (ICH9) USB Universal Host Controller

  USB controller 8: HP (ICH9) USB2 Enhanced Host Controller

  Controller FireWire/1394 1: HP FW322/323 IEEE1394 OHCI FireWire controller

  SMBus/i2c controller 1: Intel ICH SMBus

  Printers and faxes

  Printer: Microsoft XPS Document Writer (600 x 600, color)

  Fax: Microsoft Shared Fax Driver (200 x 200)

  Printer: Adobe PDF Converter (4000 x 4000, color)

  Devices

  Network services

  Network card: Intel(r) 82566DC-2 Gigabit Network Connection (Ethernet 100 Mbit/s)

  1 wireless adapter: USB wireless 802.11 b/g adapter

  Power management

  (AC) line status: online

  Operating system

  Windows system: Microsoft Windows 7 Ultimate 6.01.7600

  Compliance platform: x 64

  Windows experience index

  Current system: 5.7

  Increasing tips

  Tip of 2546: memory large-capacity Modules must be ECC/parity.

  Tip 2: Double click on advanced or press ENTER, while a tip is selected for more information on the tip.

  Hynix and Micron produce good RAM modules. I suggest that you go for 4X2GB DDR2-800 memory sticks. Here are the specifications of memory supported by the motherboard:

  Dual channel memory architecture
  Four connectors DIMM DDR2 240-pin
  Supported DIMM types:
  DDR2-800
  DDR2-667
  Memory non - ECC, unbuffered
  Supports DIMM DDR2 2 GB modules
  Supports 8 GB on 64-bit PCs
  Supports 4 GB * on 32-bit PCs
  NOTE: * actual available memory may be less

• Pavilion dv7-6b76eo: upgrade of RAM HP Pavilion dv7-6b76eo

  I created a thread really well here and received great help from @Paul_Tikkanen so if he or someone else could help me, that would be great. Don't know why I can't post a reply in this thread again. They either closed the thread or I'm blind. In any case, I have the HP Pavilion dv7-6b76eo and plan an upgrade of RAM. Currently I have samsung 2 x 4 Go PC3-10600 / DDR3-1333.

  1. I think go to ddr4, but what keeps me is some threads I have read saying ddr4 won't even in good physical shape in a ddr3 slot (which is my current) as well as this piece of info from Wikipedia:

  DDR4 SO-DIMM have 260 pines (instead of 204 pin DDR3), which are evenly spaced more close (0.5, rather than 0.6 mm) and are 2.0 mm wider (69.6 against 67.6 mm), but still the same 30 mm in height.

  Source: https://en.wikipedia.org/wiki/DDR4_SDRAM

  • 204-pin SO-DIMM (DDR3) have a single notch closest in the center than at 200-pin SO-DIMM.
  • 260-pin SO-DIMM (DDR4), 69.6 mm (2,74 in.) wide and 30 mm (1.2 inches) in height, making it wider than the DDR3 SO-DIMM, with one notch after pin 2 mm 144 (0,079 in.).

  Source: https://en.wikipedia.org/wiki/SO-DIMM

  This means that a chip of RAM SODIMM ddr4 wouldn't even in good physical shape in the slot of my laptop?

  2. well, okay... If I have to make my peace with her and stay with DDR3 can I at LEAST faster DDR3 install i.e. PC3-17000 / DDR3-2133 because my current a PC3-10600 / DDR3-1333 is sorta slow sometimes?

  Thanks in advance and would really appreciate an answer to the question 1 and 2 above!

  @nematsvehclav

  I couldn't say with certainty.

  But I have yet to see a 16 GB memory for a laptop card. "Yet."

  REO

• HP Pavilion g6 1040-ex: Upgrade of RAM HP Pavilion g6

  Hello

  I bought the HP Pavilion g6 1040-ex with product number LP233EA #A2N of Saudi Arabia.

  1. I want to upgrade my RAM. Which can be maximum RAM this laptop can work with?
  2. What are the reference number of this RAM?
  3. In which case reference numbers are not available on the local market, are there alternatives available?

  TIA

  The manual says:

  Supports up to 8 GB of memory system

  Memory modules (DDR3 1066 MHz) ● 4 GB PC3 10600 1333 MHz shared 621569-001

  https://www.Amazon.com/HP-621569-001-1333MHz-PC3-10600-SODIMM/DP/B005UF674S/ref=sr_1_1?ie=UTF8 & qid = 1466594585 & SR = 8-1 & Keywords = 621569-001

  

  You would be able to use any DDR3-1333 SO-DIMM (i.e. portable computer memory). It must be low density and which means 8 black blocks on the side of the chip as a module in the image.

  See s. 51 of the manual here for 'how-to ':

  Manual

  It's a older laptop maybe 4-5 years ago, you know? Also if you really 32-bit Windows 7 above you will not be able to add effective memory. It takes the 64-bit version to run 4 or more gigabytes of RAM. Care say that this model comes with 3 GB of RAM and 64-bit Windows 7 Home Premium so do not know what you have now.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.