Adding records

Similar Questions

• Adding records int BLOCK in a loop

  Hi all
  
  I have problems in the following ways:
  
  When I press a button, I request a cursor that returns several records, according to certain values on this record that I have to add, or not a block.
  
  Somoeone please tell me how to do, I do:
  
  GO_BLOCK ('BLOCK');
  FOR reg cursor
  LOOP
  ..
  ..
  If s = reg.value"then
  create_record;
  : BLOCK. VALUE = S ';
  end if;
  ..
  ..
  END OF LOOP
  close the cursor;
  Exception
  while others
  close the cursor;
  
  
  THX in advance!

  The problem that I feel is the FRM-40102.

  The "FRM 40102 Records must be inserted or deleted everything first" error implies that you already have a line/record of "New" in your form so that when you call the CREATE_RECORD integrated forms you said that you have not met the minimum values required for the current 'new' recording you can not create a new.

  Frm40735 suggests (good choice of name, incidentally), rather than using the Create_Record, I would recommend that you check if the line the cursor is a new record before attempting to create a new record. Your code should look like this:

  GO_BLOCK('BLOCK');
    FOR reg in cursor
      LOOP
      ..
      ..
      if reg.value = 'S' then
        If (:system.record_status != 'NEW') THEN
          create_record;
        END IF;
      :BLOCK.VALUE = 'S';
      end if;
      ..
      ..
    END LOOP
    close cursor;
  Exception
    when others
      close cursor;
  

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• Adding record helps the dynamically nested table

  Hello guys im trying to add records to a nested table plsql dynamically. Here is my code that only adds a record. I can not figuered on why it's not more then add one record to the nested table. I think I would say at the table to update the index and insert the new index but I'm not sure on the index can someone throw me a BONE.
  I also tried the records, but I seem to be facing the same problem.
  

  create or replace
  PROCEDURE QUICKTEST AS 
  BEGIN
  /*declare and array to loop through. to write error log.*/
  declare
  TYPE local_table IS TABLE OF VARCHAR2(30);
  acct_code local_table;
  
  
  TYPE rec_type IS RECORD (       -- local RECORD type
      f1 INTEGER,
      f2 VARCHAR2(4)
    );
    r2     rec_type;                -- local type
  
  num number(17):=0;
  
  begin
  FOR Lcntr IN 1..20
  LOOP
      
      
       acct_code := local_table ('I');
       r2.f2 := num+1;
      
  num:=num+1;
  
  END LOOP;
  
  END QUICKTEST;

  I think you are looking for something in the lines of...

  CREATE OR REPLACE PROCEDURE quicktest
  AS
     TYPE local_table IS TABLE OF VARCHAR2(30);
  
     acct_code   local_table  := local_table();
  
     TYPE rec_type IS RECORD(   -- local RECORD type
        f1   INTEGER
       ,f2   VARCHAR2(4)
     );
  
     TYPE rec_type_arr IS TABLE OF rec_type
        INDEX BY BINARY_INTEGER;
  
     r2          rec_type_arr;   -- local type
     num         NUMBER(17)   := 0;
  BEGIN
     FOR lcntr IN 1 .. 20
     LOOP
        acct_code.EXTEND;
        acct_code(lcntr) := 'I' || lcntr;
        r2(lcntr).f1 := num + 1;
        r2(lcntr).f2 := 'J' || TO_CHAR(num + 1);
        num := num + 1;
     END LOOP;
  
     DBMS_OUTPUT.put_line(acct_code.COUNT);
     DBMS_OUTPUT.put_line(r2.COUNT);
  
     FOR i IN acct_code.FIRST .. acct_code.LAST
     LOOP
        DBMS_OUTPUT.put_line(acct_code(i));
     END LOOP;
  
     FOR i IN r2.FIRST .. r2.LAST
     LOOP
        DBMS_OUTPUT.put_line(r2(i).f1 || ' :: ' || r2(i).f2);
     END LOOP;
  END quicktest;
  /
  

• Adding records to a collection

  Hello
  
  I have a collection of say, a. I executed a select... BULK COLLECT IN A... and "n" recoveries recorded in A. is it possible for me to run a SELECT... BULK COLLECT IN A and add the records in a. (I need the resulting records of the two queries in the collection).
  
  Thanks in advance,
  Thomas Titus

  I guess that you need at least two collections: then you would

   c2  := c1 multiset union all c2;
  

  Otherwise you must combine two queries with a union of all and bulk collect in this one...

• To add values in a multi-record block in oracle forms 6i

  S. n	Agenda	Quantity
  1	KEYBOARDS	5
  2	MOUSE	6
  3	MONITOR	2
  4	CENTRAL PROCESSING UNIT	4

  TOTAL quantity

  17

  Hello world

  He is an example for adding records in this block. I need to add the values of the quantity of each time when it has updated. Entering the first record(value=5) the total should display 5. When you enter the second value(value=6) the total should be 11. And if it changes in accounts are rendered already entered the total value must be updated. Please help me do this in oracle forms.

  Hey, Moris,.

  For the contents according to your requirement, create a block and put an element contained in this block that reside on the same canvas.

  Then below mentioned property BLOCK for newly created block:

  • Single disc: Yes

  Then set below mentioned ELEMENT of property for the newly created item:

  • Data type: number
  • Method of calculation: 'summary '.
  • Text-to-speech function: "sum".
  • Block in summary: block that you created
  • Point summary: Point you have created

  I hope it will work for you, I tested and works great.

  Thank you

  Nilesh Goswami

• Re: How to display records of newlyadded first in the table

  Hi all

  I use Jdev 11.1.2.3.0

  My requirement is I have a table in this table, I have a table and the form. Here, I want to display newly added records, first in the table.but that table always shows of old recordings first.so how do I display it.can someone help out me.

  Thank you

  G.Shilpa.

  You can control the line newly inserted into the table of the ADF

  http://lucbors.blogspot.in/2010/12/ADF-11g-how-to-control-where-new-row-is.html

  ttp://mjabr.WordPress.com/2011/07/02/how-to-control-the-location-of-the-new-row-in-aftable/

• Stored procedure to add a record do not add record

  I have never successfully added a record via a stored procedure, but I managed with adding records through behaviors using recordsets with stored procedures and server, so I know that connections work. I have the data to MS SQL Server and ColdFusion web page. When I enter data and click 'Submit', it does absolutely nothing. When I check the SQL table, no record has been added. Any help would be greatly appreciated. Here are my stored procedure:
  
  
  

  Replace:

  
  
  Null value

  With:

  I provide each form with a value variable by default so that a value will always exist for each variable.
  

  Use the null attribute, if the value is 'yes', WHAT NULL value will be passed to the parameter of the stored procedure, if the content of the attribute value will be used
  

  http://livedocs.Adobe.com/ColdFusion/8/htmldocs/help.HTML?content=Tags_p-q_14.html#1102102

• insertion of records in multiple tables

  Hope someone can keep me on the right track here.
  
  My current database structure is:
  
  I think that's all this from back to me - it is in fact only all your networking / lookup tables. so I now have the following tables:
  
  Candidates
  ---------------
  Candidate_ID (AutoNumber)
  Name (text)
  ...
  
  1, Iain
  2, fi
  3, Rob
  
  
  Job offers
  --------------
  Vacancy_ID (AutoNumber)
  Holiday (text)
  ...
  
  1, cartographer
  2, gardener
  3, OT
  4, Web Designer
  5, recruitment manager
  
  
  Profiles of school boards
  -----------
  Profile_ID (AutoNumber)
  Profile (text)
  ...
  
  1, card making
  2, Web design
  3, gardening
  4, hand therapy
  5, recruitment
  6, aviation
  7, sport
  8, travel
  
  
  VacancyProfiles
  ----------------------
  Vacancy_ID (number)
  Profile_ID (number)
  ...
  
  1.1
  1, 2
  4.2
  2, 3
  3, 4
  5.5
  5, 6
  
  CandidateProfiles
  --------------------
  Candidate_ID (number)
  Vacancy_ID (number)
  ...
  
  1.1
  1, 2
  1.7
  1.8
  2, 3
  2, 4
  2.8
  3.5
  3.6
  3.7
  
  and created two queries
  
  CandidatesQuery
  --------------------
  
  SELECT Candidates.Candidate_ID, Candidates.Name, Profiles.Profile_ID, Profiles.Profile
  Profiles of JOIN IN-HOUSE (candidates INNER JOIN CandidateProfiles ON Candidates.Candidate_ID = CandidateProfiles.Candidate_ID) ON Profiles.Profile_ID = CandidateProfiles.ProfileID;
  
  1, Iain, 1, card making
  1, Iain, 2, Web design
  1, Iain, 7, Sport
  1, Iain, 8, travel
  Fi, 2, 3, gardening
  2, fi, 4, hand therapy
  Fi, 2, 8, travel
  3, Rob, 5, recruitment
  3, Rob, 6, Aviation
  3, Rob, 7, Sport
  
  and
  
  Vacancies_Query
  -------------------
  
  SELECT Vacancies.Vacancy_ID, Vacancies.Vacancy, Profiles.Profile_ID, Profiles.Profile
  Profiles of JOIN IN-HOUSE (vacant posts INNER JOIN VacancyProfiles ON Vacancies.Vacancy_ID = VacancyProfiles.VacancyID) ON Profiles.Profile_ID = VacancyProfiles.ProfileID;
  ...
  
  1, cartographer, 1, card making
  1, cartographer, 2, Web design
  Gardener, 2, 3, gardening
  3, OT, 4, hand therapy
  4, web designer, Web design 2
  5, recruitment manager, 5, recruitment
  5, recruitment manager, 6, Aviation
  
  -----------
  
  But I'm a little shaky on how to make my insert (and modify) the pages of documents. Simple, it is enough if I just want to add a new candidate or vacation - just add a record in a table.
  
  But ideally, I would like to add profiles associated with each new candidate or vacation at the same time - which probably would add records for the CandidatesProfile and VacanciesProfiles tables too.
  
  Is this possible and if yes how do I configure?
  
  Or should it be a two steps process, IE adding records to the table of candidates and then add records to the table of CandidatesProfiles?
  
  What I am used to doing in MS Access forms would be something like the use of sub forms, but really don't know how to reproduce it in a web page.
  
  Pointers appreciated.
  
  See you soon,.
  Iain
  

  Well, I think I got in the way which it - I'm going to mark this as replied and start a new thread, as I narrowed down it to something more specific I need to do. Basically it adding a new candidate and goes to a page of profiles add-on that uses checkboxes for each profile.

  When I select all profiles, it adds them to the table of Candidateprofile, but not with the newly added candidate candidateID, but with a 0 candidateID - so I need to figure out how to pass the CandidateID candidate newly added page AddCandidate page AddProfiles...

  Iain

• Install the extension in Firefox 41 silently

  I do an automatic installer for special extensions for Firefox. I read two articles on this subject, but none of the methods described are not being helped.
  What I tried to do:

  - Placed .xpi file and unpacked unpacked extension directory in %FF_DIR%\browser\extensions
  - Placed .xpi file and unpacked unpacked extension directory in %FF_DIR%\extensions
  - Placed unpacked extension directory in another directory and added record in registry (`HKLM\Software\Mozilla\Firefox\extensions`, key is extension id and value is full path to unpacked extension)
  

  In all its forms, unzipped directory extension name was:

  - Random name
  - ID from install.rdf #1 (`{ec8030f7-c20a-464f-9b0e-13a3a9e97384}` for example)
  - ID from install.rdf #2 (`[email protected]` for example)
  

  And, as I said, all methods do not give me predictable results. Firefox does not show the extensions in the list and show no notification.
  How can I solve it? What actual method using the current version of FF?
  The target browser is Firefox 41, Windows 7 x 64 - system
  Thank you!

  See also:

  • https://developer.Mozilla.org/en-us/docs/Adding_Extensions_using_the_Windows_Registry

  {ec8030f7-c20a-464f-9b0e-13a3a9e97384} is the GUID of Firefox and not the ID of the extension, so make sure you use the ID of the extension under Description > id and not the "id" under "targetApplication" surround a GUID with braces and add the as file extension.

  • {8A6C82A1-F6C9-481a-AAE7-C96444C9A754} as
  • [email protected]

• Freezing satellite A40

  No apparent reason, my A40 - 8 times out of 10 - will freeze during a single operation - usually by looking in the .txt files with Notepad, or any adding records to a MS Access 2003 database or copy files to another location on the hard drive. This never happened while doing the tasks focused on the processor.

  Hardware and software as out of the box, only programs added since then have MS Office, Norton AV, updates the driver Toshiba and Win XPhome SP2 (SP2 = 200 + Mb download).

  Note 1: I work a lot on battery, so it may have something to do with the energy saving settings (currently @ the default values). Note 2: I don't remember having this problem before installing SP2. Not sure, however.

  Anyone have any ideas? Thank you!

  Hi Sten2,

  a friend on mine had a similar problem. This problem was based on the memory of the laptop.
  This problem occurred with Service Pack 1 and Service Pack2.Also this problem appeared in the battery and the AC adapter mode / CC.
  I would check first the memory of the laptop.

  keep us updated!

  Good bye

• Windows Media Player 11 on XP SP2 has lost all its music library and will not allow him to add again.

  I have the media player 11 and it worked very well.  Yesterday I opened a session and opened it, and there is no music in the library.  Playlists are still there.  I tried to manually add folders to watch. No joy.  When I repeated the procedure for adding, records Analyzer was still empty.  As if I never said what to monitor.

  I followed the advice offered in this forum at staceygumbert and followed a link to:

  http://www.howtogeek.com/howto/windows-vista/fixing-when-windows-media-player-library-wont-let-you-add-files/.

  This notice did not.  Once I deleted the database because it suggests that WMP asks about media sharing.  When I click on the button 'Settings' WMP fails and sends an error report.

  If I connect my wife, everything is OK.  I tried to copy its database through my user profile.  No joy.

  My Roku Soundbridge can't 'see' libraries.  However I think it's to be expected considering not having WMP does not all libraries.

  Software configuration:

  Windows media 11.0.5721.5268 player

  XP SP 2

  Hi thesafesurfer,

  Follow the steps in this document to resolve the issue with the library. Let us know if that helps.

• RecordStore object in the device

  Hi, I'm having a problem using RecordStore object in the device. I use the RecordStore object to store the user profile.

  I have a button on the screen and when I press the button I store data in the RecordStore and another button to get the same stored data. When I run the app in the Simulator, it gives me the expected result, but when I run the app even in the unit, after pressing button Save I have to restart the application to be able to get it back. Also sometimes despite restarting I'm not able to get the saved data.

  I use the following code snippets to save and retrieve data:

   public void addValue(String key , String value)
      {
  
      ByteArrayOutputStream baos = new ByteArrayOutputStream();
      DataOutputStream outputStream = new DataOutputStream(baos);
      try {
          outputStream.writeUTF(key);
          outputStream.writeUTF(value);
      }
      catch (IOException ioe) {
          System.out.println(ioe);
          ioe.printStackTrace();
      }
  
      byte[] b = baos.toByteArray();
      try {
          recordStore.addRecord(b, 0, b.length);
      }
      catch (RecordStoreException rse) {
          System.out.println(rse);
          rse.printStackTrace();
      }
      }
  
      public String getValue(String key)
      {
          String mainVal = "";
  
      try {
          RecordEnumeration re = recordStore.enumerateRecords(null, null,
                                  true);
  
          try {
              while(re.hasNextElement()) {
              int id = re.nextRecordId();
              ByteArrayInputStream bais = new ByteArrayInputStream(recordStore.getRecord(id));
              DataInputStream inputStream = new DataInputStream(bais);
              try {
                  String key1 = inputStream.readUTF();
                  String value = inputStream.readUTF();
  
                  if(key1.equals(key))
                  {
                      mainVal = value;
                  }
  
              }
              catch (EOFException eofe) {
                  System.out.println(eofe);
                  eofe.printStackTrace();
              } catch (Exception e) {
                  e.printStackTrace();
              }
              }
          }
          catch (RecordStoreException rse) {
              System.out.println(rse);
              rse.printStackTrace();
          }
      }
      catch (RecordStoreException rse) {
          System.out.println(rse);
          rse.printStackTrace();
      }
  
      return mainVal;
      }
  

  Hello

  Only, I solved the problem. The reason for strange behavior was that I was not closed RecordStore object after the CRUD operations. I added record.closeRecordStore () at the end of each method, and now it works fine for me.

  Thank you for your interest to solve my problem.

• BlackBerry smartphones want to create and add new folder Media Card/Curve 8320 T-Mobile

  
  

  Thank you Jeremy! It's just what I wanted to do. My first hike in "Adding records to the breast of media"... I wanted to rely on the experienced before trying to do so. I always thought media means only audio and video (as suggested by the 4 basic native folder/files in the media). Now, I understand "text" files are also available within the native app of Media thanks for getting back to me...

• Files shared/upgrade Win7

  I have a local network, ORGANIZATIONAL unit called "GroupA".

  All members of the GroupA can access the resources of the GroupA

  GroupA has a shared folder hosted on Win7 Pro PC.  On all the following folders are defined:

  MemberA, MemberB, MemberC and member access R/W access

  Member and MemberF can visit r

  MemberD is a user on the host computer.  MemberD has all rights of access as MemberA and MemberB MemberC

  MemberD can open and edit the files in the folder; However, when MemberD makes a change to a file, it will NOT refresh in the folder.  MemberD added a file in the folder, but no one can see it.  MemberD can only see it.

  MemberD can access a database in the shared folder and a record.  Nobody can see that added record.

  One thing I noticed on the shared folder is a check mark on the top left of the folder icon.  That this has something to do with the question?  (Not sure if she did or not)  All rights and permissions are the same as other users.

  Any ideas or suggestions?  Management of versions or libraries have something to do with its ability to change?

  Hello

   
  1. do you get an error message/code?
  2. don't you make changes to the computer before the show?
  3 are the computers via homegroup?
  3 are connected to a domain network computers?
   
  Here are some links that may be useful:
   
  Share files with anyone
  http://Windows.Microsoft.com/en-in/Windows7/share-files-with-someone
   
  File sharing essentials
  http://Windows.Microsoft.com/en-in/Windows7/file-sharing-essentials
   
  File and printer sharing: frequently asked questions
  http://Windows.Microsoft.com/en-SG/Windows7/file-and-printer-sharing-frequently-asked-questions
   
  "Access denied" or other errors in the access to or work with files and folders in Windows
  http://support.Microsoft.com/kb/2623670
   
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Addition of PERC H310 readers

  I have a PowerEdge T320 with a PERC installed H310.  Currently, there are 4 physical disks with two virtual disks.  Both RAID-5.  One for the OS, one for the data.  I installed 4 new physical disks on the server I want to add to the virtual disk 'data '.  The drives are displayed as loans in OpenManage, but I understand that there must be an option to Reconfigure on the virtual disks.  I have not just as an option.  I was hoping that I could expand this virtual disk, while the server is online but now wonder if I can develop at all.  I'm not planning a failure even to try to boot in the BIOS to reconfigure.  Wanted to see if there was something missed me or something on my configuration/version which does not allow me to reconfigure the virtual disks.

  So you have 4 disks in a TWO different RAID 5 VD on these 4 discs? If this is the case, you're stuck with it unless you do a backup/restore and remove and reconfigure sets. "Cutting" discs with different paintings cancels any option for expansion. Even if you could do a "reconfigure" by cutting, you would be expanded VD BOTH in the disk group - you could not add space to one of the slices.

  I'm not so sure if you can still do it from the BIOS of a H310. you could with a H700 and especially with a minimum firmware, but I don't know whether or not the low end H310 has got this option. If this isn't the case, you must use OMSA.

  As an alternative to a full reconfiguring/backup/restore. You should be able to save your data VD, then "Reconfigure" the VD develop to fill the disks, and THEN expand adding records or create new VD with the new drives. Of course, if it was decided in the first place because of the limit of 2 TB boot disks (not not using UEFI), then you need to rethink the whole scenario. What size are your discs?