Adding servers to the same client vSphere vCenter?

Similar Questions

• Why can't I see hosts/guests in my vCenter while I can see them in the Web Client vSphere?

  Hello

  IM new to VmWare\PowerCLI.  The goal is to get a list of VM guests in a vCenter via PowerCLI.  I can see 80 guests when I connect via the Web Client vSphere, but when I use the PowerCLI cmdlets, a Get-VMHost returns nothing.  I did the following:

  1 connect-VIServer the username-password IluvVmWare myserver.acme.com-acme\BigDog connects fine without error.

  2. $defaultviserver | Select * shows me the default connection properties.

  3 get-data center shows me 2 data centers; DC1 and DC2

  4 get-DataCenter DC1. Get-VMHost returns nothing

  5 get-VMHost returns nothing

  6 get-vmhost-Server myserver.acme.com returns nothing

  What I do wrong with PowerCLI so I can't get a dump of the hosts on the vCenter?  I can see them all in the vSphere Web Client, so permissions seem fine.

  It looks like that there.

  You must speak with the vCenter admin I guess.

  More simple would you give permissions to view read-only on the vCenter and let this authorization to spread.

  Out of curiosity, this shows the VMHostname?

  Get - VM | Select Name,@{N='VMHost'; E={$_. VMHost.Name}}

• These entire servers have the same problem, the problem is that I can't install and uninstall anything on them. (Exception from HRESULT: 0 x 80070490)

  Not enough disk space (428 and 488 event id)

  I have 3 servers,

  Exchange 2010

  TMG 2010

  Member Server. (2008)

  These entire servers have the same problem, the problem is that I can't install and uninstall anything on it even window update patches cannot be installed on it. On the server exchange and Member roll and functionality cannot be opened and displays the error message. (Exception from HRESULT: 0 x 80070490)

  Appear in the event viewer for most event IDS are 428 and 488 (not enough space).

  I have enough space on each server, IE more than 40 GB of free space.

  Please answer me if there is no possible solution.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Error created another Console service, unable to connect to the host by vSphere vCenter

  After creating an another Service Console unable to connect to the host by vSphere vCenter. How can I remove the now Service Console or make the old one further work well?

  Thank you.

  George

  This KB will show you the steps to re-create the Service Console, but you'll need to console or ILO access to the ESX host.

  http://KB.VMware.com/kb/1000266

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• vSphere SSL for the Web Client (device vCenter) certificate error

  Hello

  I installed ESXi 5.5 and right once I deployed the device vCenter. After the configuration and a few reboots, I navigates to the web client, and I get this error when I try to logon:

  "Based on the current configuration, the authentication server's SSL certificate was not reliable."

  I have until this google everything on the subject and outside tutorials on how to change certificates in the Windows version of vCenter, nothing on the device of vCenter. I was happy when I found the 'Certificate regeneration enabled' checkbox, but that did not help either. I can test successfully SSO settings in the control panel of vCenter.

  Everyone please?

  
  

  Edit: I should also mention that I am not able to connect to vCenter with the vSphere client. I get the "Cannot complete the connection by incorrect username or password". I use [email protected] as user name.

  Have you tried that? VMware KB: Troubleshooting the vCenter Server Appliance with Single Sign-On login

• How to use vGPU and vSGA both on the same host vSphere 6.0

  I tested vGPU on a host vSphere 6.0 to 6.1 of the Horizon, and I would now add a vSGA pool to this host. Only two physical GPU is used with the two vGPU vm that I turned on.

  My question is, what should I do to make this Host allow compatible vSGA VM turning on and share resources on the other two other GPU?  I put the office pool to use the 'Material' 3D rendering engine and added a VM pool.

  When I try to turn on the virtual machine, I get this error message in vSphere client Web:

  "GPU hardware is required but not available. The virtual machine will not start until the GPU resources are available or the virtual machine is configured to allow software rendering. »

  It's the output of command line gpuvm and nvidia-smi:

  

  The host ESXi 6.0 has two cards of K2 of GRID for a total of 4 GPUS. Only two vGPU-enabled vm is turned on, it seems that I can use the other two GPU for vSGA VM, right?

  It is currently not possible since the Nvidia VIB:s vSGA and vGPU cannot be loaded at the same time.

  The driver will claim all compatible GPU:s (except those configured for passthrough, IE vDGA)

  An exception to this rule is if you have an AMD GPU for vSGA and a Nvidia GPU for vGPU.

  Can't comment on if, and when this will be resolved, perhaps krd can do.

  Linjo

• Very slow performance with the Web Client vSphere

  I'm testing the vSphere Web Client, but I find it excruciatingly slow - it takes almost 5 minutes just to open a session, and each click after that I take a good load of 30 seconds before the new page is completed. I think I spent a good 10 minutes to total just go to the screen where I could power on a virtual machine, which is something that can been done in less than a minute using the traditional desktop client.

  Horribly misconfigured web client somehow?

  The following changes improved the performance of the web client of my client. So far, no more hung tasks, navigation in the console of the web client has been improved. We are always monitoring well.

  Has increased the heap size JVM of vSphere Web Client to 3 GB. Used the following KB KB VMware: settings of the configuration in VMware vCenter Server 5.1 and 5.5 Tomcat server

• Cannot ping between virtual servers on the same host

  I have a 5 ESXi host with 3 virtual copies of Windows Server 2008R2 running on them. The ESXi host is connected to my switch, which has the Windows 2008 R2 DC to my test network and my laptop management with VSphere branch above as well. I can ping host, mobile and ad server of each of the individual virtual servers and can ping and RDP for all 3 from other devices not on that host, but I cannot communicate between the three. I have Windows Firewall disabled on all three. I have no firewall, and all machines have an IP address in the 10.0.0.X range I deleted then recreated the only virtual switch on the host on which appear all 3. I've been VERY frustrated for the last 3 days on it. Why my virtual machine cannot talk to each other?

  When you have registered virtual machines in ESX you selected moved VM or Coiped VM? Go to editing parameters and watch the MAC addresses. My guess is that if you copied power (including the vmx files) then the MAC address is the same for all virtual machines. You can stop the machine and change for a MAC address mac address. You can also remove the network adapters, one of each, and then add the new network cards. Remember to reconfigure the IP addresses on the box and remove the ghost network maps after doing this.

  Check this KB to change the mac address.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=507

  Also, can you connect to the switch and look at the ARP table and see if the system VMs register here.

• The migration of the VM from ESX 3.5 data center to data center inside the same building Vsphere

  Hi experts,

  Currently, we have 5 servers ESX 3.5 and a San in a shelter in the United Kingdom. This kit is now over 3 years old and the company replaces the complete kit with a new SAN, new servers and Vsphere 4.0.

  We have the opportunity to get new equipment to the top and running in the same shelter in Britain and are therefore able to run cable network between the two cabins if necessary.

  What is the best way to migrate existing virtual machines from the old environment running to the new environment running Vsphere ESX 3.5? As mentioned only the two cabins will run in the same shelter so nothing needs to go on a WAN link.

  IM keen to not load the machines on a USB key and move like that if I can help it. It appears from the research you cannot VMotion from one datacenter to another data center, however I can Storage VMotion between the two by using a method of migration cold?

  Any help will be appreciated, thanks

  agile1983 wrote:

  Disconnect a host ESX to the old environment, connect it to the new environment. (this means now that the old host as part of the new vsphere cluster can still see the old SAN?)  Then use this host as the link between the two San as you can see both of them?)

  Yes, presentation of the old drive will still be available on the assumption that it was not presentation of your San.  You can use a transit Host, which means that all the LUNS of the old environment and the new are presented to this host, but there will be a migration in a timely.  You have to vMotion invited to this host, unplug off the old environment and then in the new sVMotion (move the host and data store) to the new.  When this is done, unplug this transit host environment and add in the old, vmotion... Rinse and repeat.   Ideally, a presentation of the new LUNS to the old ESX host would be much faster.  In this way, you can bring your old environment together in the new. Make sense?

  When I disconnect and reconnect the old host to the new environment, which also happens to the virtual machines on this host? I need to move temporarily turned off?

  all comments will continue to operate without interruption.

• Two servers in the same vlan, DMZ can be firewall with each other?

  I have a Windows server vm on a DMZ, and I need to add another soon.  We need to separate these two servers so that neither can see the other, but they must be on the same vlan.  I'm looking for in vShield, but do not have this installer again.  VShield will be able to separate them, or someone has a better suggestion?

  Hello

  Ah, your physical switch uses VLAN private for your guests. If you use a distributed virtual switch, you can configure one by VM PVLAN allowing entrants but no communication between the nodes.

  If you are using VMsafe you can achieve the same thing using the policy that denies the communication to the VM in VM virtual machines via subnet blocks but allows access from your firewall.

  VMsafe and vShield Zones are two distinctly different firewall technologies. vShield Zones is a firewall device VMsafe-net is located just before the vNIC on penetration or just after on the output of the vNIC. Each of the different problems, but for this use case, VMsafe can be the best way to go.

  If you do not have an Enterprise Plus license then you cannot use the virtual distributed switches so PVLANs may not work for you.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, 2010

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• Running one of the virtual machines on two physical servers at the same time. Server 2012

  Hello!

  I'll admit that I'm not exactly an expert Server nor I claim to be. I could use some help with the installation I build and eventually moving customers to server setup. In an effort to try to describe my question, here is a first draft of what looks like my setup.
  
  Rackstation 1 is therefore a Synology Rackstation, which runs high-availability Rackstation 2. Directly, cabledtogether, Rackstation 2 works passively and constantly updates a copy of Rackstation 1 Rackstation 1 failure.
  Host 1 running server 2012 and therefore host 2. Currently I have 6 servers virtualized on Rackstation 1, using Hyper-V Manager of 1 host. I created ISCSI storage for every server virtualized LUNS and currently have ISCSI targets to be used with host 1 pointing to the LUN. I created another series of ISCSI for Host 2 targets as well.  The idea is to have 2 host run the Hyper-V Manager and be able to connect to the virtualized servers same Rackstation 1 just like host 1 is currently. That way if nothing ever happens to the host 1, host 2 quickly usable for servers. All that seems to be able to do with host 2 is create new virtualized servers, instead of link those already created. Currently, regarding the RAM for virtualized servers, they use host 1.
  So, is there a way for host 2 to have the same virtual servers as host 1?  What I need to change my configuration to achieve this? IM open to ideas and advice on how to reconcile that far.

  Zachary, MS doesn't make it easy to find the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Sync 2 servers with the same time

  I am writing an application that requires a separate server 2 time synchronization.

  Inside, the 2 servers are not on the same network. I am in communication with the server through the SQL Server, using port 1433.

  But so that my request of wroks, I need two servers to be on the same time.

  I've read about NTP, but I think that this can be used for computers on the same network.

  Any ideas if this is possible?

  Thank you!

  Hi Brasciole,

  Welcome to the Microsoft community where you can find all the answers related to Windows.

  The question that you are running in suitable for the forum on the link below:

  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues/threads

  Please report if you encounter a problem with Windows.

• v$ session - request of exact same different results when it is run with the same user on the same database with the same client application on 2 different PC

  Hello

  Oracle 11.2.0.3

  We have a strange situation - using the pl/sql developer and a pc gui tool when query present at the session of $ v session INACTIVE for a sid given - also on sqlplus for INACTIVE same sid but on

  Another exact same request of pc shows as ACTIVE.

  What happens repeatedly with different sid.

  I thought session $ v must show the same SID as active or inactive desktop client as a database table.

  Someone at - he seen this before?

  Thank you

  When you ask anything about the database, your session will be activated as it does 'something' on the database. For example, when the user queries:

  select status from v$session where osuser = 'HIMSELF_USERNAME';
  

  It questions its own session which is 'something' on the database. So, just try it, run a query on the database using your own username as this, you will have the same results. There is no error on the data dictionary, please stop trying to think that it is a bug.

  Kind regards.

• VWC plugin using sdk 5.1 is broken if running on the web client 6.0 with port 9443 - out could not connect to the Web Client vSphere. Contact your administrator to resolve this problem.

  We did a vwc with sdk 5.1 plugin, now, we want to make it work on the web client 6.0. before the race, we have changed the MANIFESTO. MF and services-config. XML responses such as the following:

  2 important reminders for your plugin 5.5 is compatible with the Web Client 6.0

  After that, we deployed our plugin on web client 6.0

  If access us using the URL with port: https:// < ipaddress >: client/vsphere-9443 /? csp, our plugin arises, our plugin function is also ok.

  If access us using the URL without port: https://< ipaddress > / vsphere client /? csp, our plugin is present, the function is broken (error occurred when flex user interface by calling the java service: "Could not connect to vSphere Web Client.) Contact your administrator to resolve this problem. »).

  Thank you very much

  Please change the CHANNEL_URL in your proxy classes to use 'amf' instead of 'amfsecure '.

  private static const CHANNEL_URI:String = "/" + YOUR_MODULE.contextPath + "/messagebroker/amf"
  

  This should solve your problem.

• VCB on the same server as vCenter?

  Hi, I would like to know if it is possible to host vCenter and VCB on the same server.  and is it recommended?    Server will have 2 processors quda and 16 GB of ram.

  With the latest version of infrastructure 3.5 is now possible to have on the same machine both VCB and VC.

  In any case, you might have to VCB proxy + backup on the computer program physics and VC on a VM.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers