Unable to access the router configuration

Similar Questions

• T310 without IDRAC6 warns of IDRAC communication failure, unable to access the BMC configuration

  Hello

  I got through my company a T310 which has no IDRAC6 Express card or the company.

  The LCD screen remains white/black constantly (tried with a spare one, same result) and when starting, it signals a failure of communication IDRAC6, which is normal since there is no card, then it restarts once more before entering Windows very well. He never offers me to enter a BMC configuration utility. I tried to reset the settings of the default BIOS nothing helps. OMSA reports no problem. Also updated the BIOS to the latest version 1.8.2 without modification. Fan is very noisy and I understand that by updating the BMC firmware, I have a chance to correct it, but I can't get into any configuration of the BMC.

  In my view, there was a map iDRAC6 before, but it is no longer, so don't know how to clear this error. I read that an iDRAC6 Express card is OPTIONAL, so it shouldn't bother me on this subject.

  ==> I want to erase those mistakes to POST, being able to update BMC firmware (or iDRAC) so that I can get the fan to operate at acceptable noise levels.

  (1) how do the server to understand that there is no. IDRAC whatsoever and give me access to the BMC during POST configuration utility?

  (2) is it normal that the remains of white LCD Panel at any time? Start button / stop works very well, just none of the buttons works, never get any color/light. Is it possible that it is controlled by the IDRAC/BMC, which, in its current mess, can't drive? I understand that the LCD comes with the option Connect hot (not sure why btw), so that I think it should work regardless of the IDRAC are there or not.

  I'm ready to buy an IDRAC6 Express card if there is a good chance that he will address this problem by eliminating the communication error and perhaps give me access to the config of the IDRAC. But I would really like to understand what's happening before you spend more money on it.

  Thank you!

  Max

  Hi Max,.

  The question might actually be caused by a problem of motherboard, a functional PowerEdge server without IDRAC should not show the error message, more if the Ctrl + E option is not displayed during POST, it indicates an abnormal start of BMC.

  Are what OS you running on the system? I don't know if you're aware, but the BMC update can be applied to the level of the OS, which are available here:

  http://Dell.to/HIBoTI

  If the system is still under warranty, I highly recommend asking for you assistance and support if a motherboard replacement is required.

  Thank you.

  Best regards

  DC Lim

  Reference Dell | Outreach services social - business

  Follow @DellCaresPro on Twitter: www.twitter.com/DellCaresPro

• Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

  Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• remote VPN and vpn site to site vpn remote users unable to access the local network

  As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

  The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

  ASA Version 8.2 (2)
  !
  host name
  domain kunchevrolet
  activate r8xwsBuKsSP7kABz encrypted password
  r8xwsBuKsSP7kABz encrypted passwd
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  PPPoE client vpdn group dataone
  IP address pppoe
  !
  interface Ethernet0/1
  nameif inside
  security-level 50
  IP 192.168.215.2 255.255.255.0
  !
  interface Ethernet0/2
  nameif Internet
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  management only
  !
  passive FTP mode
  clock timezone IST 5 30
  DNS server-group DefaultDNS
  domain kunchevrolet
  permit same-security-traffic intra-interface
  object-group network GM-DC-VPN-Gateway
  object-group, net-LAN
  access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
  tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 Internet
  IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  enable ASDM history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  AAA authentication enable LOCAL console
  LOCAL AAA authentication serial console
  Enable http server
  x.x.x.x 255.255.255.252 out http
  http 192.168.215.0 255.255.255.252 inside
  http 192.168.215.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dynmap 65500 transform-set RIGHT
  card crypto 10 VPN ipsec-isakmp dynamic dynmap
  card crypto VPN outside interface
  card crypto 10 ASA-01 set peer 221.135.138.130
  card crypto 10 ASA - 01 the transform-set RIGHT value
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  the Encryption
  sha hash
  Group 2
  lifetime 28800
  Telnet 192.168.215.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  management-access inside
  VPDN group dataone request dialout pppoe
  VPDN group dataone localname bb4027654187_scdrid
  VPDN group dataone ppp authentication chap
  VPDN username bb4027654187_scdrid password * local store
  interface for identifying DHCP-client Internet customer
  dhcpd dns 218.248.255.141 218.248.245.1
  !
  dhcpd address 192.168.215.11 - 192.168.215.254 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Des-sha1 encryption SSL
  WebVPN
  allow outside
  tunnel-group-list activate
  internal kun group policy
  kun group policy attributes
  VPN - connections 8
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split tunnel
  kunchevrolet value by default-field
  test P4ttSyrm33SV8TYp encrypted password username
  username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
  username kunauto attributes
  Strategy Group-VPN-kun
  Protocol-tunnel-VPN IPSec
  tunnel-group vpngroup type remote access
  tunnel-group vpngroup General attributes
  address pool VPN_Users
  Group Policy - by default-kun
  tunnel-group vpngroup webvpn-attributes
  the vpngroup group alias activation
  vpngroup group tunnel ipsec-attributes
  pre-shared key *.
  type tunnel-group test remote access
  tunnel-group x.x.x.x type ipsec-l2l
  tunnel-group ipsec-attributes x.x.x.x
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
  : end
  kunauto #.

  Hello

  Looking at the configuration, there is an access list this nat exemption: -.

  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

  But it is not applied in the States of nat.

  Send the following command to the nat exemption to apply: -.

  NAT (inside) 0 access-list sheep

  Kind regards

  Dinesh Moudgil

  P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

• WRT1900AC: Cannot access the router remotely

  This can be a simple, but I'm scratching my head on it.

  I just took a 1900 for my personal use at home. I did a basic auto config (Nothing fancy, just Plain Jane).

  As part of the configuration process, I associated the router to a Smart Access account that is different from that assigned to the routers in my church.

  For some unknown reason, I can not access the router using the Smart app unless I am accessing Internet through the 1900. If I have Internet access through my Verizon FiOS router, the Smart application tells me that my wireless router is offline.

  I missed the 1900 and started from scratch using my office... again... combining the unit on the account. Once again, no luck.

  I have a session with my smartphone and tried again with my tablet. Still no luck.

  Just to make sure that there is no failure, I tried to access the routers of the Church... and has been able to do without any problem.

  Y at - it an option that I forget? I don't remember running into this situation when you configure the 6500 s and 6900 s.

  10,168 is also a private IP address.

  I recommend that you enter this address that you see on the WRT router in DMZ ISP modems. If there is a reservation on the ISP modem function, book it as well so it can't change it later. This will keep the DMZ address for the WRT router and you should be good here.

• After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.

  If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!

• Firefox is unable to access the internet

  Hello

  Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages appear. The strange thing is that Firefox Sync seems to be able to connect to the server, and I can download plugins.

  Best regards
  Joel Hedestig

  You can try using the beta version of firefox mobile?

  https://play.Google.com/store/apps/details?ID=org.Mozilla.firefox_beta

• Access the router cant admin homepage

  I can't access my router admin page.

  I tried this: 192.168.0.1 192.168.1.1 www.routerlogin.net www.routerlogin.com, I used google, internet Explorer...

  model of router: wndr4500

  Can you help me?

  Kind regards

  Xander

  Assign you a static IP address on the computer?

  If you have set it to static, back to obtain an IP address automatically.

  The two IP addresses must be in the same range.

  It is recommended that you access the router admin page using a computer that is connected directly to the router.

• MY mail server hardisk full so cannot start services & also unable to access the mail server

  I have the server messaging, but Hardisk ful then failed to start Services and also unable to access the e-mail mail server troubleshooting steps.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• I'm unable to access the internet with my CV due to the reception of the following - xp Antispyware 2011 alert. How can it be deleted?

  I'm unable to access the internet with my CV due to the reception of the following - xp Antispyware 2011 alert.  How can it be deleted?  I have McAfee Total Protection Plus, but which apparently does not work.  Help, please.
  This problem existed for about a week.

  Hello

  ·         What is the exact error that you are experiencing?

  ·         How long have you been faced with this problem?

  ·         Remember to make changes to the system?

  It seems that your system is infected by a virus or malware. I suggest you to run a scan on the system online to make sure that your system is free from viruses and malware. Click on the link below.

  http://OneCare.live.com/site/en-us/default.htm

  Also, I suggest you to download and install Microsoft Security Essentials on the system. Click on the link below.

  Microsoft Security Essentials

  http://www.Microsoft.com/security_essentials/

  I suggest install Malicious Software Removal Tool from the link below and then install it on the system and are looking for malware.

  Malicious software removal tool

  http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx

• We have a Nextbook but are unable to access the Internet at home

  We have a Nextbook but are unable to access the Internet at home, even if we have a laptop and PC. How to solve this problem? Thank you.

  Hi Vernon,

  1. you are trying to connect the Nextbook to wireless (Wi - fi) network in your home?

  It is a tablet based on Google's Android. As it comes to one product other than Microsoft, I suggest that get you in touch with the manufacturer about this issue. You can contact them at the following link:

  http://www.nextbookusa.com/techsupport.php

  Hope this information is useful.

• I'm unable to access the Web site rewards club mail

  I'm unable to access the Daily Mail online REWARDS CLUB site WEB TO ENTER MY NUMBER ONE

  Hi BrianSheridan,

  1. what happens when you try to connect to the site?

  2. you receive an error message?

  3. what web browser do you use?

  4. what version of IE are you using?

  5. are you able to open the Web site in the other computer?

  If you use Internet Explorer, then perform the following troubleshooting methods:

  Method 1:

  Optimize Internet Explorer, and then check how it works.

  Check out the following link to optimize Internet Explorer.

  How to optimize Internet Explorer

  Note: This article is also applicable to Internet Explorer 9.

  Method 2:

  Also perform the following troubleshooting steps.

  Can't access some Web sites in Internet Explorer

  Method 3:

  If you use Internet Explorer 9, then perform the steps in troubleshooting at the following link.

  Some sites Web may not behave as expected in Internet Explorer

• Unable to access the network using Edimax N300 universal Wi - Fi extender

  Original title: Edimax Extender will not get internet access

  I naoual got a N300 Eimax universal Wi - Fi extender but I am unable to connect to the internet.  They suggest setting up near the wi - fi access point to get the signal stronger and I got to show connected in the window ' currently logged in ', but it does not connect to the network.  EDIMAX has proposed upgrading the firmware, but I was unable to get any joy with that either.  Anyone with any ideas would be appreciated.

  Hi Gofchap,

  Thanks for the question of validation in Microsoft answers community!

  I imagine the frustration you feel when you are unable to access the network.

  The problem may be because of the Extender, diverter, or with the network adapter.

  1 did you do changes on the computer before the show?

  2. do you receive any error messages?

  3. What is brand and model computer?

  4. have you tried to connect without using the extender?

  I suggest you to visit:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab3&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon.

  Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?

  The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!

  Hi,

   

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.

  I understand the inconvenience caused to you. I'll help you solve the problem!

   

  Before troubleshooting, I have little information on the issue.

  1. did you of recent changes to the computer before this problem?

  Try the methods suggested in the article below and check after each method:

  Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

   

  Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.