Addition of second SSID for public internet

Similar Questions

• Can you connect directly a Tablet wifi to your computer for the internet

  Can you connect directly a Tablet wifi to your computer for the internet

  Let me answer this way:

  Suppose you have a desktop or workstation that has a wired connection to the internet. Moreover, that this system also has a working wireless card. Another device with a pu wireless device to connect to desktop with a wireless ad-hoc connection. The desktop can be configured for connections to bridge the two and leave the system second to use "Internet connection sharing" to connect to the Internet.

  Start here:

  http://support.Microsoft.com/kb/306126

  Tom Ferguson.

• GANYMEDE + traffic over the public Internet

  Hi all

  We have the network devices that do not have intranet/VPN connections on internal Central GANYMEDE + servers behind firewalls corp, I wonder what an acceptable practice to send the traffic of GANYMEDE + on the public Internet? GANYMEDE + payload is encrypted, but the attacker can always say that a package is the package GANYMEDE + with a sniffer.

  Thank you

  GANYMEDE servers + are available from Internet sources? (basically, it's a combination of if there is a static address for GANYMEDE servers + public address translation, and whether it is on the firewall devices Internet access policies to initiate traffic to the servers GANYMEDE +). If the answer to any of these conditions, it is not, there is no point in considering the possibility of sending the traffic of GANYMEDE + on the Internet because it would not succeed. If these conditions are met, then the traffic GANYMEDE + could be transmitted.

  And if the traffic could be passed then it becomes a question of what the company towards risk Internet access. The good news is that GANYMEDE data + encrypted so an attacker will not observe the data ID or password of the user. But the bad news is that you have now opened an attack vector to critical network devices. Only one person knowing the business position risk can determine if the benefit of GANYMEDE + for remote sites is worth the risk.

  HTH

  Rick

• what application would you recommend if I want to use my ipad as a second monitor for macbook please?

  What application would you recommend if I want to use my ipad as a second monitor for macbook please?

  http://www.ZDNet.com/article/Duet-display-turn-iPad-into-a-second-monitor-for-Ma c-to-zero-latency-review.

  It uses a wired connection of USP and so did not shift as applications that use wifi

• Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro

  Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro.

  I did Boot Camp with 8,1 this system successfully but the upgrade of Windows 10 dorked BootCamp upward when it is added to the system partition.  Has had a lot of work, but ultimately got all partitions disappeared and I tried Boot Camp and got it.  I erased the disc and then reinstalled El Capitan sweet factory without bringing more parameters.  Now, I still get the same error?

  I tried a few sizes of ~ 50 to 170 G with no luck.  It's on a MBP 2016 15 "with retina, 512G SSD, 16G RAM, GPU display.

  Any suggestions?  Troubleshooting?  I can't yet find/say if this thing creates something useful for a log file or?

  1. you download Windows Support software on a wireless connection? If so, try a connection cable, if possible.

  2. Please look in Applications-> utilities-> Console logs for error messages.

• Slot Netbook Sim Toshiba NB200-12N for mobile internet

  Hi all

  I bought a Toshiba Netbook NB200-12N, and when I looked at the manual, it said that it had a Sim slot under the battery for the mobile internet.

  However, when inserted the Sim Card into the slot and switched the netbook on nothing happened. There are no options to choose for mobile broadband services activation or even no recognition that I inserted a Sim Card in the slot.

  I looked in all control panel system resources and for all the options for mobile internet using the Sim Card in the slot, but without a bit of luck.

  I am very disappointed that Toshiba has only go as far as showing you how inert to the Sim and remove it without tell you how to get it started and use it with success.

  Could someone please help.

  According to the specifications of the laptop your model has no 3G module and no slot for SIM card inside.
  Is clearly written in the manuals > some models.

  Sorry buddy.

• HP 8630 will authorize specifying the second tray for printing shortcut.

  All-in-one printer inkjet HP 8630 range Pro will not accept specifying the second tray for printing shortcut. Indicates that the parameter is a conflict and obliges the "Printer Auto Select" option instead of allowing me to select "tray 2" which is an option. I like to keep a white shining in tray one and photo paper in tray 2 and made the my HP 8500 Pro for everything that I needed to do is select the appropriate shortcut configured by me to print the photo. Operating system is windows XP Pro.

  I want to start by apologizing for not picking up on this on your first post. The 8630 2nd tray print 8.5 x 11 or 8.5x14 paper.

  The reason why what impression pictures he says that there is a conflict and if he chooses the main tray is because there is no choice. The printer does not have the ability to print photos from the 2nd drawer. If you're looking to load media into the trays you need 8.5x11 or 8.5x14 in the 2nd tray and other media can be loaded in the main tray.

  In the printer's Specifications in paper output specifications > paper tray capacity & Supported sizes of paper in you shows what's available for trays.

  Change the source of your document must make all the problems disappear.

  Kind regards

• Pavilion 9408nr: Add a second drive for another main drive for laptops

  How can I add a second drive for another main drive of laptop computers. I took the car on the same cell type that crashed by the motherboard. I put it in drive Bay 2. Problems with starting. I sometimes want to boot from disc 2. Is there a MBR somewhere? Are there jumpers to make it slave. Sometimes it will install the software on 2 without any question. Is there a way to make a slave?

  Important-copy all data on the second hard drive you want to save on the first hard drive.

  MBR of Windows with the hard drive. Use Windows Explorer to locate the second hard drive. Right-click on it and format it.  Once this done, all what one is a storage device and not bootable until the operating system is installed to it.

  The BIOS will only see the hard drive as a bootable as it will now be the only drive with a MBR boot sector.

  The days of placement of the jumpers to determine master or slave on the disks hard is long gone. SATA drives have no jumpers slave\master like the old school IDE and Eide did.

• Help please I'm trying to set up my microsoft exchange e-mail account, but it requires a password for my internet service provider. I don't have one. How can I solve this problem?

  Where do you find a password for the internet service provider? First of all, I never heard of him, what is it?  When they hung my internet, nothing has been said to need a password. Help, please?

  Hi Sherry,

  Contact the technical assistance service from your ISP for help with your account – including the password (which, although I suppose that it is possible (if intentionally the value no password which is incredibly dangerous if they would even which allowed), is incredibly little likely, there isn't - although the installation program can do such that the need to seize every time has been bypassed and this way you apparently).

  If this isn't a problem with your ISP or ISP password, then it probably has something to do with the Exchange Server Setup program.  I'm not sure what exactly that you try to configure - an Exchange Server account, or an account customer to remote Exchange, hosting of your email server.  If the question relates to Exchange Server, please see the forum for assistance: http://social.technet.microsoft.com/Forums/en-US/category/exchangeserver.

  But the first place to start is your ISP because no matter the issues by e-mail, you need to know or may need to know your password.

  Good luck!

  Kosh

• Configuration Linksys WAG120N for cable internet

  Hi I am not able to configure the wireless router linksys for my Internet Bill fiber. Please help me.

  The ISP gives necessary PPoE and dynamic IP connection. I have the user name and password to connect to the ISP and internet active.

  But I am not able to configure the router to connect to the internet. Please help me

  Here's what you can try, I know I did it before with a Modem Router but not this particular model.

  Make sure you do not connect your computer to your router via an ethernet cable, turn off PPPoE and Wi - Fi features on your computer so that it uses only the Ethernet connection.

  Then access the WAG120N page.

  I have a question though, when you connect the cable from your modem to the router? Is the DSL port? Or on the ethernet port? If your modem cable is an RJ45 connect it to port 1 on the WAG120N, then on the page of the router you must activate something.

  Click Ethernet under Setup, and then select use as a WAN Port, select the connection type in the menu drop-down (select PPPoE). Enter the username and password provided by your ISP, then save the settings.

  

• I use a dongle for my internet but suddenly I can't connect. "" When I run windows diagnostics I get this message "not set up to establish a connection on the port.

  Internet connection problem

  I use a dongle for my internet but suddenly I can't connect. When I run windows Diagnostics I get this message... "www.microsoft.com"is not configured to establish a connection on port "service world wide web (HTTP)" with this computer. Can anyone help please?

  Hello

  (1) don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to start your system in safe mode with network and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 3: Of connection problems in Windows wireless and wired network:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this information is useful.

• CAN´t static IP value for an internet connection on WRT - 54G v8

  Hello

  I have a WRT - 54G v8 and it s impossible to set a static IP address for my internet connection.

  I can´t something together if you can see in the photo, my OS Windows 2008 Server ist, but until that time, I Don t had problems to configure the routers. It makes me sad that I have can´t to connect with the router and I hope someone has an idea of what might solve it.

  

  Try using a different Internet browser.

• Is it necessary to create additional rules not permitted for uses such as Regedit.exe etc when applying software restriction policy?

  Is it necessary to create additional rules not permitted for uses such as Regedit.exe etc when applying software restriction policy?

  Hello

  Please visit the following link. This should explain the software restriction policies in detail.

  http://TechNet.Microsoft.com/en-us/library/bb457006.aspx

• OfficeJet Pro 8620: Part number for second paper for Officejet Pro 8620 tray?

  I'll try to find the good second tray paper for this printer.

  Some documents quote Ref CN548A HP and others quote A8Z70A. The two look alike, and both refers to the range of 8600.

  I bought the CN548A and 'almost' fits, it doesn't seem to work

  Anyone able to help?

  Thank you

  Hello @petertow,

  Welcome to the Forums of HP Support!

  I would like to help you with the correct information for the second paper for your HP Officejet Pro 8620 tray accessory e-all-in-one printer location today.

  • Good reference for the paper tray number is: A8Z70A

  The CN548A paper tray is only for the printer HP Officejet Pro 8600. The Officejet 8600 series came out before the HP Officejet 8620 and the 8630 printers series. Therefore, the tray is not universal.

  I wish you good luck going forward with this!

• using the laptop as a bridge for the internet

  my laptop is connected to the internet via an ethernet cable because we have a wired router as rooms are wired for the internet. iWant to know if I turn my wireless on my laptop can I access internet on a netbook. via laptops wireless card I know that this is possible with a mac, but don't know if it is with windows I am running vista Home premium and have a toshiba 15 '' laptop.thanks for any help you might be able to give.jeff (:)

  Hi jeff,

  You can check the following links on the network bridge connections in Windows Vista and check:

  Create a network bridge

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-network-bridge

  Add a connection to a network bridge

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-connection-to-a-network-bridge

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.