Additional memory installation

Similar Questions

• HP Touchsmart 520-1030 - additional memory installation

  I am trying to install extra memory on my HP Touchsmart. I was told when buying this PC I could simply take the back off and put in a stick more than 4 GB of DDR3 RAM that this model has 2 slots, of which only 1 is currently used? I don't see where the memory going!

  Can anyone help please?

  Thank you

  Andy

  Windows 7 (64-bit)

  This article should help you install more memory.

  http://support.HP.com/us-en/document/c03052806

  .

  And the following article contains information about the memory upgrade for your product.

  http://support.HP.com/us-en/document/c03073665

• Additional memory installation on a Satellite 3000

  I'm unable to install memory on a Satellite 3000 - X 11.

  It was suggested that I need to update the bios, so ia´ve donwloaded Bios 1.60.
  When I try to reboot it tells me "This is not the right update for my system"
  But it's the update is recommended.

  [Edited by: admin on April 22, 2007 20:41]

  Hello

  I put t know why you can not upgrade the BIOS BUT usually the BIOS update is not necessary if you want to upgrade the memory on your laptop
  I think that if you use the memory modules right everything should work properly

  Found a useful page that gives interesting information on upgrading memory on Sat 3000 - x 11
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=14194&ft=m&St=3

  So according to this page, you should use modules SODIMM PC133 144 pins and you can upgrade the memory to 512 MB max

• Need instructions on installing additional memory

  Laptop Inspiron 1501 - How do we install additional memory

  http://www.google.com.au/search?hl=en&source=HP&q=Installing+RAM+in+a+Laptop&Meta=&aq=f&OQ=

  Read the info about it in hits in the Google link above.

  We give no instructions in these Froums re installation of hardware in desktop computers and portable computers.

  Take you laptop to a computer repair shop good local reputation.

  See you soon. Mick Murphy - Microsoft partner

• My current osx is the version 10.5.8.  I read the posts on this site advises users to buy 10.6 and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible? Thanks for any help!

  I explore what I need to do to upgrade my imac. My current OS is x version 10.5.8.  I read the posts on this site advises users to buy 10.6 (Snow leopard) and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible?  I have an Intel Core 2 Duo 2 GHz processor and 1 GB of memory. My Info says memory I have 1 Bank empty. Thanks for any help!

  You need to install more RAM before moving to Snow Leopard and need to do before moving to Lion or newer. Buy it from a source OWC or Crucial.

  (138456)

• Pavilion 2320tx g6: additional memory segment created in the PC.

  Hi all

  Of these last two days, there is an additional memory segment created on my hard drive that is named as disk Local (Z), claiming an area of 256 MB, which, if we add in other segments such as C, D, F discs then it will exceed the 1 TB. What is the problem? (I have attached the snapshot of the segments compure hard drive)

  There is no problem with this small partition being there.

• Upgrade Vista 32 and 64 for the recognition of additional memory and game performance

  I have a question for the computer.  I have a HP Pavilion Elite m9040n who has Windows Vista 32 - bit SP2 with 3 GB of memory.  From what I've been able to determine, the 32-bit version doesn't recognize up to 3.5 GB of memory and I need to install the 64 bit version of Windows Vista for additional memory can be installed AND recognized.  This system comes with the Core 2 Quad Q6600 (K) 2.4 GHz, at 1 066 MHz front side BUS and Socket 775.

  My question - would be upgrade to Windows Vista 64-bit and install another 4 GB for a total of 7 GB of extra memory for increased game performance.  Also, I have a graphics program which because of some image sizes (up to 96 inches - 19200 pixel everywhere) program that the bombs on me with "out of memory" messages.  I play World of Warcraft and Starcraft 2 right now.

  Thank you.

  Just another Hacker ol '

  In your case a newer graphics card improve performance much more compared to buying new RAM. You can then add more RAM. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How can I order additional memory for my HP Mini 210-2001sd PC computer

  How can I order additional memory for my HP Mini 210-2001sd PC computer

  Here is a link to a seller.

• The amount of additional memory can be placed in the second slot. Best battery?

  The details of my laptop are: system manufacturer Hewlett-Packard model system Presario V6000 (GG228PA #ACJ) Type of system based on X 86 PC processor x 86 Family 6 Model 14 Stepping 12 GenuineIntel ~ 1862 Mhz BIOS Version/Date Hewlett-Packard F.25, 12/05/2007 SMBIOS Version 2.4

  Total physical memory 512,00 MB DDR II. (2 Rx16PC2-53005)

  1. how much additional memory can be placed in the second slot.

  2. If I use only one slot, the total amount of memory can be placed?

  3. What battery Ah maximum can be changed to the existing farm CT: 6301501BB UNFRJ and its cost?

  Maximum total memory is 2 GB and the unique maximum is a 1 GB module. It uses of the SO-DIMM DDR2-533

  This is a new battery 12 cells on eBay:

  http://www.eBay.com/ITM/95W-genuine-rechargeable-12cell-battery-fit-HP-DV2000-dv6000-V3000-V6000-EV089AA-/390317484515?PT=Laptop_Batteries&hash=item5ae0bc29e3

  It will be a bit curved on the bottom but the most long-life battery, that you can buy for him.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• you need additional memory

  Hi, aurora r4 with 2 x 4 GB ram sticks. I use it for games on simple monitor@1920x1080,would it be useful to add extra RAM to make own quad memory? The cost is £50

  Thanks Martyn

  No, no game requires more than 8 GB of RAM.  Only useful if you use applications that have need of additional memory such as editing video, rendering, etc., or if you are in the habit of running several memory hogging application simultaneously.

  Also, the memory quad configuration will not give you nice perks in the use of real life on config double memory.

• Pavilion 500-189: usefulness of adding additional memory to a computer desktop Pavilion 500-189

  Hi - I think adding memory RAM additional to my desktop HP Pavilion computer model 500-189, bought in February 2014. It runs under Windows 10 home ed., 64 bit with RAM total to 10 GB. The computer has 4 memory slots and currently only 2 are used: slot 1 has a card 2 GB Hynix/Hyundai 1600 MHz and slot 2 has a card 8 GB Kingston 1600 MHz.

  I'm currently pondering adding a single 4 GB DDR3 1600 MT/s PC3-12800 CL11 map of 240 pin unbuffered UDIMM in each of the last two slots to bring the memory total amount up to 18 GB. The total cost would be less than US $40.

  My question: This inexpensive upgrade will not improve the performance of my computer or is - this exaggeration only change?

  Comments or suggestions would be greatly appreciated.

  Graphene, welcome to the forum.

  Now, we are dealing here with reviews.  The sweet spot for memory seems to be 8 GB with Win 10.  In fact, I read that you will be hard to see a difference between 8 and 16 GB.  I use a laptop of Omen HP with 8 GB memory game.  It manages all the games that I played very well.  As you said, you already have 10 GB of memory and the processor is very fast.

  Yet once, is discussed in the opinion.  In my opinion, the best upgrade that can be done today is an SSD.  My HP Omen loads games and programs incredibly quick and starts in 7 seconds or less.  I used a Samsung EVO 840 500 GB SSD in HP Phoenix Gaming desktop computer.  Again, it was incredibly fast.  Here is the SSDthat are recommended by Crucial memory.  They make great products for OEM computers.  I found the research that Samsung SSD seem to work better with HP motherboards and normally don't require changes to the BIOS works properly out of the box.   In addition, Samsung has its own Migration of data and Software Wizard software to fine-tune the SSD after installation.

  This should give you pause.  If you decide to go with an SSD, I'd be happy to tell you how I did the installation.  It has worked well for me.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Free additional memory on device RIO

  Hello NO,.

  First of all, thank you for the great products hardware and software as you continue to develop and support!  I worked on an application for a sbRIO using LabVIEW and LabVIEW FPGA.  My sbRIO-9601 has 64 MB memory volatile.  My problem is that only 21 ~ MB this is available for my program.  I guess the other 43 MB is used in the operating system for the sbRIO allowing communication TCP/IP, the LabVIEW run-time environment, etc.

  My application makes use of the TCP/IP communication to control / monitor the sbRIO on ethernet.  Is there a way that I could disable several other treatments that I do not use, and seem to use volatile memory in the background?

  To describe my symptoms of problem more clearly:

  I wrote a piece of software that uses a fairly large amount of memory

  I followed the memory usage of the sbRIO using Distributed System Manager 8.6

  Before you deploy the sbRIO-my code, there are only 21 MB of available memory

  Code deploys successfully, with most of the 21MB available to load large enough data structures

  When I start to manipulate the data, need more memory

  Use memory Distributed System Manager 8.6 on the sbRIO climbs as the program works to achieve 100% memory usage

  The VI is abandoned without error; simply, the program stops and waiting to be executed.

  Thank you!

  Idle

  Idle;

  What version of NI RIO you have installed on the sbRIO? You can go and install the minimal installation of RIO in MAX, go into your device sbRIO then software right click and go to add/remove software. This wizard, you can customize all the installed components. I formatted my sbRIO and installed NI RIO 3.1minimal and it takes only 15 MB. Try reformat and reinstall your driver for a minimum version. Let me know if you have any other questions.

  Hunter

• HP Pavilion 763n automatically restart after installing additional memory

  I just installed more memory for my Compaq HP Pavilion 763n.  My operating system is Windows XP and the memory card, I bought 1 GB DDR - 266 (PC2100) Non - ECC Unbuffered 184-pin 2.5V CL = 2.5 64 X 8 memory.  When I installed the new memory, I restarted my PC - and everything worked fine, but the PC automatically restarts every 5 to 10 minutes.

  I installed the new memory card of 1 GB two ways - in the second location of memory (virgins) next to the original card of 512 MB, then I turned off the PC and installed the new card of 1 GB instead of the original card of 512 MB (I removed the card to origin), thinking that maybe the problem.

  It still restarts automatically every 5 to 10 minutes.  I now use the PC with the original sound of the memory only card, so the problem is certainly related to the installation of the memory card.

  Anyone has an idea why my PC is doing this and what to do?

  Thank you very much for all your comments!

  The Hynix used d ' award by OEMs and seems to be a good memory.  I'm not fallen on the Elpida brand.

• slot Memory 4 quit working after installing additional memory sticks

  I have a HP pavilion running XP media center a1440n 2005 with 1 GB of memory installed in the factory PC2-4300 (266 mhz) into the slot 1 & 3 (blue slots) total of 2 GB. I bought (2) sticks of memory PNY PC2-6400 and added 2 & 4 slots (black sites). Computer started and ran fine, checked CPU - Z and all memory displayed. I thought I could replace original with additional faster memory PC2-6400, since I realize that the unit will work on slower speed stick. To view before, I bought more memory, I got out of memory original slots 1 & 3 and replaced by the new memory. Computer would not boot. Has released the new memory and replaced with the original and the computer started. When I tried to install the new memory in slots 2 & 4, computer wouldn't boot. After changing the sticks and 2 & 4 memory slots checked OK but computer wouldn't boot with anything in the 4 Groove. For now, I use 3 & 1 GB in slots 1, 2, and the computer seems to work very well with all 3 assignment. I guess the slot 4 is shot, but why would the computer starts not with the new memory in ALS 1 & 3?

  Hello

  Try to clear the CMOS memory.  You can also try to remove the CMOS battery.

  Use a flashlight and visually inspect the slots for bent pins.

  I've seen this problem before and clear the CMOS usually solves the problem, but not always.

  Your best bet is to use a tool for major manufacturers such as Kingston, crucial or Corsair dimm to make sure that your have the correct DIMM and then followed by a call to the sales to make sure that you have chosen the correct DIMMS. I use sets matched across all DIMM slots to avoid compatibility problems.

  BTW, HP specifications only list PC2 - 6400 DIMM approved.  This can cause weird problems.

• support for additional memory?

  Hi all

  I have Dell XPS 625 with 3 GB of RAM, 2 GB in a slot and 1 GB in another. How can I know how long I can improve my memory? How high each slot can go? Without opening the box, how can I know how I have more slots?

  Thank you.

  According to the specifications of the Installation Guide:

  Memory
  Connectors	four accessible DIMM DDR2 internal connectors
  Capabilities	1 GB and 2 GB

  Type of memory	800 MHz DDR2 DIMMS; memory non - ECC only
  Minimum	2 GB (2 x 1 GB DIMM)
  Maximum	8 GB (4 x 2 GB DIMMS)