support for additional memory?

Similar Questions

• Qosmio G30 (PQG32C) - support for the memory of the 3.90 BIOS

  Hello

  I wonder what type of memory can handle my Toshiba with the new BIOS 3.90. Repair said I can put DDRII 533 and 667 MHz only. My new BIOS will manage with DDRII 800 MHz or 1066 MHz? Description of the BIOS says nothing.

  Exactly what are the models of memory you prefer for G30 (GoodRAM, Kingston, G.Skill, Kingmax, Samsung, Hynix, Patriot)?

  Hello

  Update BIOS doesn t affect the handling of the RAM modules. This will be controlled by the chipset and motherboard and the new BIOS doesn t support newer or other RAM modules.

  On the different modules of RAM I have good experience with the modules of Kingston. This module s high-quality and is compatible with most laptops. I never had a problem with them.

• Upgrade Vista 32 and 64 for the recognition of additional memory and game performance

  I have a question for the computer.  I have a HP Pavilion Elite m9040n who has Windows Vista 32 - bit SP2 with 3 GB of memory.  From what I've been able to determine, the 32-bit version doesn't recognize up to 3.5 GB of memory and I need to install the 64 bit version of Windows Vista for additional memory can be installed AND recognized.  This system comes with the Core 2 Quad Q6600 (K) 2.4 GHz, at 1 066 MHz front side BUS and Socket 775.

  My question - would be upgrade to Windows Vista 64-bit and install another 4 GB for a total of 7 GB of extra memory for increased game performance.  Also, I have a graphics program which because of some image sizes (up to 96 inches - 19200 pixel everywhere) program that the bombs on me with "out of memory" messages.  I play World of Warcraft and Starcraft 2 right now.

  Thank you.

  Just another Hacker ol '

  In your case a newer graphics card improve performance much more compared to buying new RAM. You can then add more RAM. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• SSH keys are protected by a password that is supported for SSH tunnels?

  Using SQL Developer 4.1 I get an error if I try to connect a SSH Tunnel using a private key that is protected by a password.

  com.jcraft.jsch.JSchException: privatekey: aes256-cbc is not available [B@2ef5d584
    at com.jcraft.jsch.KeyPair.load(KeyPair.java:654)
    at oracle.dbtools.raptor.ssh.RaptorFileIdentity.createIdentity(RaptorFileIdentity.java:26)
    at oracle.dbtools.raptor.ssh.RaptorIdentityRepository.getRepository(RaptorIdentityRepository.java:32)
  
  

  

  I don't see anywhere to enter the password; is it supported?

  Thank you.

  As Jeff said, pass phrases are supported. While your keyfile may require a password, is not what we shifted upward.

  Instead, the problem is that the developer SQL does not support aes256-cbc. We don't specify as an algorithm of encryption supported by trying to open the SSH connection. If the key cannot be used. It is a bug, please add support for additional cryptographic algorithms beyond the default value OF THE used by ssh-keygen and other key generating default tools.

  In the meantime, if you have a control on the generation of keys, you can try using a different encryption algorithm but preserving the password requirement. The only solution would be to create the tunnel outside the SQL Developer and then manually create connections that run through the tunnel.

  -John

  SQL development team

• Add support for the iPhone in an application already published

  Hello

  Is it possible to add support for the iPhone to a multi-folio application which we have already published in iPad format.

  If so, what are the steps before you download a .ipa file revised to Apple for review?

  There are a few paragraphs on the update of the application in general on p58 here but nothing specific to add support for additional platforms to an existing application.

  Thanks in advance for your help.

  Ross

  You must do two things to make your application work on the iPad and the iPhone:

  1. create fact sheets for the iPhone.

  http://help.Adobe.com/en_US/digitalpubsuite/using/WS4cb2576c7954973c-70d16164136e6c7cfbc-8 000. HTML

  2. create and submit a new version of the viewer using DPS App Builder. Select iPhone and iPad. Use the same files mobileprovision and CERT.

  You also need to create some application icons and splash for iPhone screens.

• My current osx is the version 10.5.8.  I read the posts on this site advises users to buy 10.6 and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible? Thanks for any help!

  I explore what I need to do to upgrade my imac. My current OS is x version 10.5.8.  I read the posts on this site advises users to buy 10.6 (Snow leopard) and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible?  I have an Intel Core 2 Duo 2 GHz processor and 1 GB of memory. My Info says memory I have 1 Bank empty. Thanks for any help!

  You need to install more RAM before moving to Snow Leopard and need to do before moving to Lion or newer. Buy it from a source OWC or Crucial.

  (138456)

• How can I order additional memory for my HP Mini 210-2001sd PC computer

  How can I order additional memory for my HP Mini 210-2001sd PC computer

  Here is a link to a seller.

• Memory maximum support for HP pavilion 15-n003TX

  Hello

  I want to buy HP pavilion 15-n003TX, but I want to know what is the maximum memory supports for her? I want to at least 12 GB of Ram for my test. This laptop does support a lot more RAM?

  Thank you

  Jitendra

  Hi you!

  The system ask you Maximum support up to 8 GB of RAM.

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• Win 7 Support for Intel 865 G (HP D530 SFF) graphics card

  I recently upgraded my HP/Compaq D530 SFF model (small footprint) Pc in XP - PRO on Win - 7.  The upgrade was easy and went smoothly.  Update Windows automatically updated the driver ADI AC97 Integratd Digital Audio to worm 5.12.1.5410 and the driver Broadcom NetXtreme Gigabit Ethernet to worm. 10.100.0.0, which are listed by HP as Win-Vista certified.

  Unfortunately, it didn't automatically update the driver for the hardware Intel 865 G chipset motherboard graphics.  Instead, it installs a Microsoft "generic" drivers VGA game.  My D530 SFF special is a 2.8 ghz P4 hyperthreading, but according to the HP "Drivers WEB site" (for XP), all versions of the HP D530 has the same graphics hardware. so, my exact submodel should not really matter.

  Windows 7 runs strong (at least as well as XP) on this beautiful little PC.  In three days, it has generated NO 'system' or 'application' error log.  Win-7 notification Center, however, annoyingly tells me everytime I open a program of specific graphics of Win - 7 (even the game of Solitaire) that my video card is running in "software rendering" mode with NO hardware acceleration.  Even the Solitaire game runs very slowly, but it runs without error.  Microsoft "DirectX Diagnostic Utility" indicates that DirectX 11 is running correctly on my PC and it can't find ANY error.  It indicates (as I already knew) that hardware acceleration has been turned off.

  I tried to run HP softpac "sp31335.exe" to load the version "6.14.10.4396 has ' graphics drivers running on this PC when installing XP.  The softpac ends before doing anything with a message that says "Unsupported OS."  Because softpac graphic drivers are supposed to be 'XPDM"consistent, I suspect they will probably work with Win - 7 (even if they are NOT supported by HP and may have some minor problems).  In any case, I would put a "restore point" and give it a whirl.  What I have to lose, because there is NO data or programs installed on this PC (clean install).  In the worst cases, I just reload Win - 7.

  My problem: I can't go to the version "6.14.10.4396 has ' graphics drivers because of Installer softpac (i.e."sp31335.exe").  Is it possible that I can bypass the message 'NOT supported by the OS' and get the graphic drivers to install anyway?

  Update: I solved my problem.  Even if HP has structured its executable program SoftPac (sp31335.exe) so that it will not install the version of graphic XPDM driver 6.14.10.4396 on a HP D530 with Windows 7 operating system, Intel made this driver available on its WEB site and is available for download. ZIP format.

  During a search, however, I found a newer version of the Intel driver and installed.  The Windows DirectX Diagnostics utility reports NO errors and hardware acceleration has been turned on.  In addition, 96 MB of memory is allocated to graphics.  I ran for a good week with graphics performance at least equal to what was previously done under Windows XP.  Data for this download are the following:

  Intel (r) 82865G Graphics Controller (Microsoft Corporation - XDDM)

  Driver provider: Intel Corporation
  Driver version: 6.14.10.4656
  Driver date: 01/08/2006
  ----------------------
  c:\windows\inf\ialmnt5.inf
  C:\Windows\system32\drivers\ialmnt5.sys
  C:\Windows\system32\ialmrnt5.dll
  C:\Windows\system32\ialmdnt5.dll
  C:\Windows\system32\ialmdev5.dll
  C:\Windows\system32\ialmdd5.dll
  C:\Windows\system32\igxpxa32. CPA
  C:\Windows\system32\igxpxa32. VP
  C:\Windows\system32\igxpxk32. VP
  C:\Windows\system32\igxpxs32. VP

  Apparently, Intel provided this driver to Microsoft for inclusion on the installation disk of VISTA to 865G family support (and other).  I extracted the following excerpt:

  Q3: Intel provides drivers for Intel Graphics Media Accelerator 900 (Intel GMA 900) WDDM on platforms based on the Intel 915 Express chipsets?

  A3: Intel will provide support for WDDM drivers, starting with the Intel® 945 Express Chipset family and beyond. See question 5 below for a detailed explanation of the WDDM support on platforms based on the Intel® 915 Express chipsets. However, Windows Vista is supported on the Intel® 865 G, 915 G Express desktop PC and 852/855 GM chipsets chipsets mobile running XPDM (XP Display Driver Model) driver included on the Windows Vista install media. Windows Vista will install on these platforms, but advanced features such as Aero in Windows will not be enabled as XPDM drivers do not support Windows AERO.

  The text above was extracted from the following link:

  http://www.Intel.com/support/graphics/sb/CS-023606.htm

  The version 6.14.10.4656 driver I use successfully on my HP D530 is discussed in the following Microsoft Forum thread:

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/5406d400-e9ef-4A10-A913-3706c16b76d1

  The link to the actual pilot (who was eliminated on the previous thread) is as follows:

  http://CID-ad503689c74985c7.SkyDrive.live.com/self.aspx/public/Intel%2082865g%20Driver%20%5E5Vista-Win7%5E6.zip

  Hope this helps someone else, and I thank all the people who have created the references above.  My HP D530 now works FINE!

• No support for npapi plugin?

  Hi, we use software that is based on JAVA for our clients to access our services. As I read in some news, support for NPAPI plugins will end in the 64-bit version of firefox 41 (so java no longer be supported). This is only version 64-bit windows or Linux and Mac also being targeted? We need this information so that we can tell our customers that we always support the browsers.
  Thanks in advance

  Only the start of Firefox Win64 41,0 + version will have only whitelisted Flash Player 64-bit for now.

  64 bit versions of Mac OSX and Linux may continue to use other plugins compatible 64-bit in addition to Flash Player.

  That the Firefox 42.0 is the current target for Win64 version as was 41.0 previously. The Fx Win64 41.0 b # is based on the beta channel will be affected by the white list.

• Firefox mobile not supported for lg optimus zip

  Hello, I have recently switched to straight talk and was sad to find that firefox mobile is not supported for the lg optimus zip. In the future, I hope that this will change.

  Hello moon_serenity, firefox does not work on your device because it has to little memory RAM (150 MB instead of the 384 needed for firefox to run). in the past there has been efforts to make firefox on android race on more than low-end devices, but the 384 seem to be the background limit which was concluded in which is possible to achieve. If I am afraid that there will be no way to make firefox run on the lg optimus zip.

  https://www.Mozilla.org/Firefox/mobile/platforms/

• 15 - ba006nl and 15-ay008nl: ram taken Max supported for upgrade

  I would like to know the maximum ram supported for two laptop. On the HP page, it is not specified. They are the two 8 GB of ram (ddr3l for 15-ba006nl) and ddr4 for 15-ay008nl but the max ram supported for a future upgrade is not present. Maybe it is only 8 GB and can not be upgraded? Thank you.

  Hello:

  For the 15-ay008nl, Chapter 1, page 6 of the manual of the service provides information to upgrade memory.

  http://h10032.www1.HP.com/CTG/manual/c05087748

  Your laptop is a 6th gen core processor, so the max is 2 x 8 GB.

  For the 15-ba006nl, Chapter 1, pages 2 and 3 of the maintenance manual provides memory upgrade information.

  http://h10032.www1.HP.com/CTG/manual/c05227786

  Your laptop has an AMD A-8 processor, so the max is 2 x 8 GB.

• Satellite Pro P100 - support for 4 GB of RAM in Win7 64 and Intel Virtualization

  Hello to the members of the forum,

  I have the Satellite Pro P100 (PSPAHE - 002001GR) and I installed the WIN 7 Enterprise 64 free trial. I have Modules of memory 2 x 2 GB Corsair, a T7400 processor and Bios version 4.7. Everything works fine without their memory. Known BIOS all 4 GB, Windows see it uses but only 3 GB. I know im not alone with this problem, but I have not found a solution to solve it. In msconfig, all right, there's max, and the number of processors. RAM not activated.

  If someone knows a way to work to use all 4 GB of installed Ram?

  I would be much obliged if anyone can help.

  Something else. Intel VT - X is not enabled by BIOS. Also, there is no option to do this. When I bought the laptop it is a feature that I want to use, and now the BIOS does not support it. Why didn't pay much for the laptop so characteristic specific card do not work propably?

  Thanks to everyone for reading my post and want to help.

  SOFC

  Hello

  Perhaps than that you seem stupid now, but I think that this model laptop was never supported for 64-bit operating systems, and I think the BIOS is also not designed for this.
  If you wish, you can call Toshiba nearest service and ask for help. They have access to the database of Toshiba and they can check it for you.

• Support for Satellite 5200 801 2 GB SD card

  Is it likely to be a produced pilot to add support for memory 2 GB on the Satellite 5200 801 SD cards, or is a hardware limitation?

  Ian.

  Hello

  I've never seen with 2 GB size SD card. Unfortunately, I put t found any information or documents if this size will be supported by the device.
  However, I found the SD cards supported for your laptop:

  Part number 1.) 256 MB memory SD: PX1118E-1NME
  2.) 512 MB memory SD part number: PX1121E-1NME

  Best regards

  Good bye