ADF application do not display correctly with the IP address of the url and url localhost.

Similar Questions

• Value of the URL parameter with: do not display correctly on the page

  Hello
  
  I'm working on a page with an interactive report. One report column is a hyperlink to another page (Page deletion). This link goes to an id and a title page delete such as its poster a confirmation message to the end user before to actually delete it. If the title contains a ': ' the text after the ":" is not displayed on the page (visible in the URL on top)
  
  Is it because that the ': ' separates parameters in a URL to the APEX and, therefore, the text after the ': ' is considered to be the following URL parameter?
  How can we solve this problem?
  
  Kind regards
  Priya Jetley

  A solution should be not only not to work with the parameters in the URL.

  Simply a process to pass values from one page to another as is:

  BEGIN
  IF: REQUEST = 'TEST' THEN
  P2_ID: = P1_ID;
  P2_TITLE: = P1_TITLE;
  END IF;
  END;

  In this case, your problem is solved, and it is safer because the user does not see what id is passed and can not manually put the id in the URL...

• Police is displayed correctly with the exception of specific characters

  Hello!

  I try to use several fonts in Adobe CC 2015 and while the selected font appears, the specific characters are not.  For example.

  If I'm typing: what's up?

  It displays as: what s upward?

  Or it will not display the ': what s upward?

  I used the same fonts in other applications such as Word and I do not have this problem at all. So far I have discovered that if I change the font for a font which will show you the lack of character as rectangles, then I add in the apostrophe (or another tank missing) it works fine.  It seems that the lack of character must appear as the right rectangle - I can't just change to any font.

  Is it me?

  Confused.

  Maria,

  I have the definitive answer regarding these two fonts.

  First of all, they are publicly downloadable fonts on dafont.com. I downloaded them reviewed with a publisher of professional fonts and this is what I found.

  For fonts JamesFajardo, opening and closing single and double quotes typographical are actually defined in the police as a draft. Therefore, since the characters are well-defined, InDesign (and all Adobe applications) use as-is. Which translates to white display test. If you want an apostrophe, overlay which to replace the closing quotation mark will make your viewable and printable document.

  For fonts Hanshand, opening and closing single and double quotes typographical are defined at all in the police. Thus the .notdef glyph (this square box) is used. This is completely consistent with the specification for the use of these fonts. As in the case of the police of JamesFajardo , if you want an apostrophe, overlay to replace the apostrophe closing will make your viewable and printable document.

  By default, InDesign uses the quotes when the overlay even place or paste text. So, if your Microsoft Word document had used a typographic-no apostrophe, then import that would produce a conversion to get what you see. Also, when the overlay in Microsoft Word (or other office applications), if you have this option is disabled, you will not get any attempt to replace the automatic.

  However, is that these two policies are fundamentally flawed because common characters used in Western Latin language available are missing and in the case of JamesFajardo, the police are actually defective, to distinguish these characters as a draft.

  For your entertainment and edification, I am attaching to this answer the tables of output for these two fonts font so you can see exactly what is defined in them. Ironically, a similar chart appears on dafont.com web pages associated with each of these fonts.

  Sorry for the inconvenience that you have been through, but there is not much at Adobe, we can help you with these fonts.

  -Dov

• Why my site Muse not displayed correctly on the phone?

  I created a site in desktop and Adobe Muse phone versions.  I published the Business Catalyst site and have my domain transfer with masking to the catalyst for business address.

  If I get the catalyst for business of the site url appears correctly on the phone.  If I enter the domain name, shrivelled.  I googled the problem and added HTML in the header:

  < = happy 'viewport' meta name = "width = device-width, original scale = 1.0, maximum scale is 1.0, scalable user = 0" >

  This has not solved the problem.  What I am doing wrong

  Indo - usbposummit.businesscatalyst.com

  www.Indo-usbposummit.com

  Hello

  I see that you call indo - usbposummit.businesscatalyst.com in a frameset on your domain www.indo-usbposummit.com.

  

  Mobile redirection may not work correctly nested within a frameset however indo - usbposummit.businesscatalyst.com will redirect correctly.

  If you pass the domain name rather than wrap the site muse in a frameset, mobile redirection will be able to work.

  Kind regards

  Vivek

• InKeySetFilter not working correctly with the filter that is not IndexAwareFilter

  I found that InKeySetFilter works correctly with filter that does not implement IndexAwareFilter.
  
  for example:
  cache contains the Integer objects
  
  cache.keySet (new InKeySetFilter (new ClassFilter (Integer.class), cache.keySet ())) //returns all elements
  
  cache.keySet (new InKeySetFilter (new ClassFilter (String.class), cache.keySet ())) //also returns all the items
  
  InKeySetFilter works the same way, not only with ClassFilter, but with a filter that is not IndexAware. It looks like a bug.
  
  PS using coherence 3.5.3

  Hi Serge,

  Yes, there seems to be a bug, if m_filter isn't an IndexAwareFilter, applyIndex returns null instead of return m_filter.

  With the help of the following subclass should solve this problem:

  import java.util.Map;
  import java.util.Set;
  
  import com.tangosol.util.Filter;
  import com.tangosol.util.filter.InKeySetFilter;
  import com.tangosol.util.filter.IndexAwareFilter;
  
  public class FixedInKeySetFilter extends InKeySetFilter {
  
     public FixedInKeySetFilter() {
     }
  
     public FixedInKeySetFilter(Filter filter, Set setKeys) {
        super(filter, setKeys);
     }
  
     public Filter applyIndex(Map mapIndexes, Set setKeys) {
        Filter filter = getFilter();
        Filter res = super.applyIndex(mapIndexes, setKeys);
        return setKeys.isEmpty() ? null : filter instanceof IndexAwareFilter ? res : filter;
     }
  }
  

  Best regards

  Robert

• Desktop does not - black screen with the cursor and access to Task Manager

  Well, I played recent MMO and to do this, I had to update my sound drivers and graphics. I managed to finish my first uninstall all the old drivers-flawless and it worked perfectly thereafter with no video issues (that I had before the uninstall, but nothing harmful to the system). Eventually however, I started to get some pop ups Windows 2008 C++ REDIS saying that atieclxx.exe had asked to be terminated in an unusual way. No problem, I close the error message and everything always works as it should. No random crashes.

  My problem is that wermgr.exe (I am fairly certain that this is the title, but I did not work right now), began leaving me with a black screen and the cursor when I connect. In most cases, I can open the Task Manager by pressing Ctrl + Alt + Delete, however, it sometimes won't start, and when I start to kill unnecessary tasks, they take some time to die. I know that black screens are often a defective start of explorer.exe, which manages office and file, browsers so I use the Task Manager to run it and it dies or continues to do nothing without making the office. Whenever this happens, wermgr.exe was running (Windows error handler). When I kill this task, which often has duplicates, I can finally get explorer.exe to load. I have the same problem with safe mode, except that the display shows the version of windows and the details in each corner until explorer.exe load finally. I've also had freezing issues long whenever Werfault.exe jump upward and the only thing that those fixed has been disable Werfault.exe in the services menu.
  It is clear to me that the windows error reporting programs consume a lot of the capacity of the CPU of my computer and they are probably the source of the biggest problems I'm having. I should stop start, or they are just neutral, awakened by a bigger problem?
  On a smaller note, C++ error is probably due to me not having is not the correct edition of the redistributable C++ installed, or perhaps too many distributions. The last edition, I have installed is 10.0.40219 of the x 86 and x 64 redistributable and runtimes (2010). Are the oldest, I installed some updates ATL and 5 2005 Redistributable (2 x 64 versions). Atieclxx.exe is the program having the pop-ups demand 'unusual termination. " The version of my ATI Radeon drivers are included in Version 2012.1116.1515.27190 of the AMD VISION Engine Control Center.
  Now, finally, I think it's useless, I'll give you my specs:
  OS: Windows 7 Home Premium, 64-bit
  Processor: AMD Athlon TF-20, 1.60 GHz
  RAM: 3.00 GB
  Model: Acer Aspire 5534
  BIOS: InsydeH2O V1.12
  Graphics card: ATI Radeon HD 3200, using aticfx64.dll and aticfx32.dll
  I do not believe that a reinstallation is necessary, because I got my computer in good enough condition that I can write this message and use it as usual, however, it's a nuisance to do, because it requires waiting a few minutes while the wermgr.exe process is stopped by the Task Manager.

  HiJack This help "fix selected", I removed the SmartShopper and BHO entry no name, as well as a few more suspicious looking files and those to the left of the old installs (windowblinds). I also deleted all entries in ø16 because I didn't need them and didn't like their operation. Then, I deleted two mistakes of R3, who looked extremely suspicious.

  IT'S FIXED NOW!
  I restarted and connected to be greeted with my office. The second csrss.exe is still underway, and atieclxx.exe works well as well. Although they appear to be the cause of the problem, because I am intimately familiar with the process of my computer, it is also clear that many of the comes from problems of registry and the programs that I have only half managed to uninstall. I hope this helps people to the problem in the future, and if my problem recur soon, I will return to this article with more information.
  As a final note, I was extremely impressed with HiJack this, because I used it for the first time in order to solve this problem. He kindly explained to me why he alerted me and what kind of problems listed that would cause a lot of things helped me to decide what to remove. Now I know why divert this is recommended everywhere on the internet as a diagnostic tool.
  To not appear as an advertising bot, but it's the tool that solved my problem for this, I have it suggests. in any case, good luck and I hope you can fix this problem yourself. With the help of google, an open mind and careful decision making, it is possible to solve anything. I do not recommend using a shotgun to do so ;)

• everything I try and tells me that I have not assicated file with the program and it is not true, what should I do?

  IF I TRY AND OPEN, VIEW, DELETE, DOWNLOAD, WHATEVER. I GET A MSG OF ERROR THAT SAYS THAT THE FILE IS NOT AN ASSOCIATION TO PERFORM THE TASK AND TO SET FILE ASSOCIATIONS IN THE PANEL.  \THIS IS NOT TRUE  AND EVERYTHING?  I CAN'T DO A SYSTEM RESTORE YET.

  Hello

  We need the name of the program/s you are trying to open or the file extension of / them

  and a viewer, or a program must be installed on your computer to open a specific extension

  see if that helps;

  How do I... Change file extension associations in Windows Vista?

  http://www.TechRepublic.com/article/How-do-i-change-file-extension-associations-in-Windows-Vista/6172036

  and if you can't do a system restore which is the error message?

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• My Web page is not displayed correctly. Its my first time using DW and I do not know what Ive done wrong.

  In fact, its my first website that I created and used Dreamweaver for. I got for about 4 days now, and I am trying to download my Web page to my host.

  If you click on my site: http://www.logobotix.com you will see that everything which displays text - and very small businesses. The site isn't like that at all. I have a logo at the top, there are a lot of colors and its neater.

  When I downloaded on my public_html folder, I the file index.html directly in the public folder, then a sub folder called "images".

  I have no idea how to make it work! Help, please.

  Small text, is because you have told the browser to use 5pt font size in the body,td,th css declaration which is in the head section your pages code.(that's really small even for print) 
  
  
  
  pt size is for print you need to use px, em or %. I would go with px because its easier to understand. Hike your font-size up to at least 11px.
  
  Also it appears you have not uploaded your css 'style.css' file to the server (see link below) as it can't be found. You need to upload that in its folder with the name of 'css'
  
  http://www.logobotix.com/css/style.css
  
  Try those amends and see what happens
  

• Printer all of a sudden not to communicate with the laptop and cannot print, possibly because of antivirus software?

  All of a sudden I can't print from my laptop, wireless or via the USB port.  I get an error message "the printer does not."  I did the dx/repair and was able to print a test page, but that's all.  I would like to know if it would be because of my antivirus/firewall software?

  I use Windows 8 on an HP laptop.  Security software is Norton.  This has never happened before and I "ve been using this Norton subscription for at least 8 months, maybe longer.

  Is there something I can do in Norton settings to solve this problem?

  Thank you.

  Well, do not know what is happening in the cosmos, people, but it is printing again, but only with a USB cable, not of wireless.  Sigh.  Here, I'll still.

• just upgraded to 60 d and lr 3.5.  Import not display jpgs in the folder and showing as raw + jpg

  the jpg and raw used to display side by side in catalog and import dialoge now that they are 'stacked' together, I can't the jpg in the importation of all dialog box, even if they are there in windows Explorer.

  They show that the raw + jpg after importation.  How can I make their show as separate files?

  I would like to see the side by side with the new camera

  Import Edition/preferences/Options / process separate next to files like pictures raw JPG files should be checked.

  Frans

• I can't get my breaking points to work correctly with the Tablet and phone browsers. Should what number I use.

  I tried to build this in my current file as well. I just need to create a new from scratch so that my site will be better work for phone and tablet with the new sensitive provisions? www.nwtxconf.org. If you are on phone or tablet, you can see the extra space on the right size of the browser that I can't get rid of.

  Relax, take a yoga class or singing...

  Let it go - Karaoke breakpoint - YouTube

  Wait the final notice of Dani at the end!

• Stokes not display correctly with zoom since the update to version 2015. Someone knows how to fix this?

  

  try turning off the GPU acceleration (the icon of the rocket in the control bar).

• Online status is not displayed correctly on the contact list

  My sisters status has not updated to show whether it is online or not. My mother's status is updated correctly to indicate its current status.

  Tried to delete and re - add contact on both sides.

  I have a MSN switch more user and the software is on the current version for me and a sister (Windows 7 6.11.0.102).

  Thanks for the info. Although not a solution, he advises me that there is not much that can be done. Have updated to the latest version so. Using the check for updates option and said it was the current version.

• sign '%' do not display correctly in the shared folder

  Files in shared folders that have a '%' sign is displayed with "% 2500". Example:

  Z:\Packages\µTorrent 1.8.1\%AppData% appears on the virtual computer as

  Z:\Packages\µTorrent 1.8.1\%0025AppData%0025

  Most of the time this isn't a problem, but when executing scripts or tools such as building package ThinApp, the incorrect naming of folders really breaks things.

  Any ideas? Is this a bug?

  Phil

  PR 254465. By your badge that I assume that you are an employee of VMware, so there are easier ways for you to find this kind of thing out to ask on the forums.

• The application is not to load with the following messages

  

  How can I fix this.  I can start the Photoshop as administrator

  You have repaired permissions again?