SL410 hanged during the update of the BIOS

Similar Questions

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• When I restart Windows 7 home premium, the computer hangs on the bios screen.

  I don't know what exactly when this problem started, but I can stop the machine and it will start normally.  If upodates are installed and the machine restart it hangs at the bios screen all the time.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A300 does not start after extinction during the BIOS update

  Hello

  I tried to update the BIOS after reading a TOSHIBA TEMPRO alert, after some time, apparently not run so I ran a second time, then both ask of BIOS appeared in the taskbar only and it froze while I did not start the upgrade or anything like that I had to the power off.

  I tried to restart, but now, it just on the screen stays black (the monitor is not powered, as if the system was not running), all LEDS are powered with flashing 'drive access', the led on the DVD Player keeps flashing making a noise every 3 seconds or more.

  I read on the forum that there may be no solution but to take it to an authorized service provider but I'm willing to take any possible solution before you do.

  Thanks for any advice.

  Alex.

  Hi, mate

  Unfortunately, you need to be reflash the Bios as something that went wrong during the update. You should contact the Asp and ask them to reflash. There is no other way to get your laptop to work.

  Good luck!

• Satellite A200 - 1 GB block during the bios update - will not turn on

  Need help please, I was updating of the bios. And the process is stopped at: 2/18. I wait an hour and i decided to turn off the laptop. Know I can't turn on. Nothing happens. Anyone know how the recovery mode?

  Thank you

  (Sorry for my bad English)

  Josefa Hello,

  It sounds as if you of the BIOS chip was damaged during the attempt to update failed, and unfortunately this will prevent you from starting your laptop so that you can tyr to redo the update.

  In my view, that it will be necessary to bring or send the laptop to a Toshiba authorized service agent who has the equipment necssary to re flash your BIOS chip.

  Kind regards

• Firefox 38 update hangs during the rsyslog config on LinuxMint 17.1 cinnamon?

  Hello

  I used LinuxMint Update Manager to update the packages as usual.

  Firefox presents itself as an update, so I took that too far.

  In the middle of the installation while it configures rsyslog, it hangs after the display of "syslog user already a member of adm.

  He remained there until I disconnected and restarted hoping that should clear up the shot.

  Now, any use of apt dpkg or apt - get comes up with an error message saying to run ' dpkg--configure - a "which I did and ends up in the same time.

  Help? Caesar.

  Download Firefox full installation for all systems and languages {web link}

• Satellite L450D PSLY5E freeze during the BIOS update - now does not turn on

  Hi guys,.

  I have a Satellite L450D. I recently tried (unfortunately) update the BIOS after a clean installation, because the FN key no longer working to bring up the toolbar.

  Winphlash program froze near the end and the system remained frozen for a good half-hour. The only way out was to remove the battery (as I know in any case).

  Now, the system will light with battery in or out and plugged in. I guess I've damaged the hard drive or the card mother or something.

  Is it possible to fix? Or is it?

  Thank you very much for your help.

  BTW - I know now not to update the BIOS unless it is ABSOLUTELY necessary and well advised.

  Joey

  > I guess I've damaged the hard drive or the card mother or something.

  The disk HARD isn t damage but the Rom module where the BIOS is stored was not flashed properly.
  I guess that this happened because the flash procedure was interrupted.

  I'm not sure if this can be fixed perhaps the service guy could flash the ROM module with special disc of crisis of the BIOS.

  I keep fingers crossed

• Satellite 1900 203 stops during the bios update

  I downloaded the BIOS update for my Satellite 1900 203 and put it in the floppy drive. the problem is that when updating the computer suddenly stops.
  I think the problem is in the software, but I can't get a solution of it...
  Fred

  Hello

  I would not recommend to download and install the BIOS on Toshiba Canada website!
  As far as I know your laptop was designed for the European market and you should always use the driver, BIOS of the Toshiba site European and tools!

  But I agree with dnf666. If the laptop works properly it s not necessary to update the BIOS!
  And note: the bad BIOS or bad BIOS can damage the module ROM!

  On the Toshiba page, you will find a teaching how BIOS should be updated on several models of laptops!

• (P50) Blue screen during the BIOS update

  Hello

  I'm trying to update to the latest version of the BIOS, http://support.lenovo.com/se/sv/products/laptops-and-netbooks/thinkpad-p-series-laptops/thinkpad-p50...

  (Lenovo ThinkPad P50, (20-0007MS), Windows Enterprise 10, 64 - bit, build 10586, suspended BitLocker.

  But when the update starts and it comes to read current Bios, the laptop gives me just a blue screen and the error:

  
  Your PC rann in a problem and must restart.
  We are just collection that some info of the error, and then we will restart for you (xx % complete)

  If you want to learn more, you can search online later to this error:

  System_service_exception (TdkLib64.sys)

  A google search gives no results.

  Comment to Moderator: Fixed URL.

  Nice day.

  I'm sorry that I can't help with the problem you are experiencing using updater .exe.

  If ensure you that you need the update, you can try the boot disk method: http://support.lenovo.com/us/en/downloads/ds106109

  I hope this helps a little.

  Kind regards.

• HP Pavilion p6-2069sc: computer hangs during the HP splash screen

  Hello.

  I plug an ASUS GeForce GTX STRIX 750Ti to use in my Pavilion P6 - 2069sc, but when I start the computer after installing my GPU, the screen hangs on the blue HP startup screen.

  When I try to hit the ESC key to enter the BIOS or any other keys it comes just a beep of the machine.

  It is a long beep every 20 seconds or so from the computer.

  When I use the integrated graphics card, everything works as they should.

  I already upgraded to 550W 300W POWER supply

  Because your computer has been manufacturer Sept 2011, there Legacy BIOS.  The latest vBIOS UEFI was initiated at the HP units at end of 2012.  That said, either you stay with a Legacy BIOS GPU card, or choose a dual hybrid card BIOS.  The GTX 660, or GTX 670, all of which are two high-end of the legacy card would be far superior to the GTX 750Ti.   All the current hype is looking for a lower quality card, the 750Ti, based on the more low power and some GTX offering a BIOS hybrid via Select manufacturer. The Asus could not be hybrids, as you can testify.

  http://www.hwcompare.com/17301/GeForce-GTX-660-vs-GeForce-GTX-750-TI/ 450W SS6

  http://www.hwcompare.com/17306/GeForce-GTX-750-TI-vs-GeForce-GTX-670/ 550W PSU

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-660/specifications

  Based on your existing new POWER Pack, (hopefully a quality unit), 660 GTX would be good.  In my humble OPINION, an EVGA GTX 660 is better based on your power supply of the system. Please call EVGA for re - check a Legacy BIOS.

  PS I have a EVGA GTX 660 and 670 in my BIOS Legacy of <>towers.  I tried an ASUS, but he did not have an ASUS motherboard. Strange, but ASUS check the fault has his own card. Cost me $50 return shipping cost, so Please check with any manufcacturer.

• HP Pavilion 23: computer hangs during the boot process

  Computer updates been made 2 days ago and has frozen black screen. Now does not start at the top. Starts the process and then freezes. He did start once yesterday and was going well for a few hours, then got a message saying computer had a problem.

  Error message:

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (atikmdag.sys)

  Now back to not start upward again, hangs with the HP logo on the screen.

  Hi there @ldgie25.

  That the Forums are with you!  I understand that, after a few updates, your computer does not start correctly and freezes on the HP logo.   I'm happy to help you with this.

  Since it was started once, but then had a blue error screen, I suggest using the computers HP - use Microsoft System Restore (Windows, 10, 8).   Follow the instructions in the section «restore your computer when Windows is unable to boot normally»  See if it will start normally after the restoration. If yes then you probably want to prevent the offending update to install again.

  Please see the following for how to do this:

  How to temporarily prevent an update for driver reinstallation of Windows 10 - support.microsoft.com

  How to uninstall and updates to block and drivers on Windows 10 - howtogeek.com

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Satellite Pro A10 hangs during the installation of Win XP

  Hi guys,.

  just thouth I would ask why my new laptop will not install XP.
  Only, it crashes during installation. No n' achete purchased on this occasion, had no operating system installed.

  I wonder if it's a driver problem, using my xp disc I bought, but like I said that just, it will hang during installation.
  What I need to intergrate drivers somehow?
  I'm guessing that this is the problem?

  If so, how do I?

  see you soon

  I really wonder that your new laptop is probably produced about 5 years ago. ;)

  In any case, to install WXP use WindowsXP SP1 installations CD (factory settings). If you want to discuss a little more please explain to us what exactly is happening.

• Windows XP installation hangs when the BIOS is set to AHCI

  I have Windows 7 on my computer. It has a motherboard Asus P8Z77 - V LX with the AHCI BIOS.

  Now, I would like to install Windows XP to a dual boot set up so that my son can continue to play some of their old games XP.

  When I tried to install XP, I got the BSOD during the first phase of the installation process.

  Internet research, I discovered that Windows needs a controller AHCI driver and that I could use F6 to install the appropriate driver to a diskette during installation or wake the driver in a Windows installation CD using a program called nLite. I chose the latter because there are no floppy drive on the computer. I chose the version XP 32 bit Intel (R) series 7/216 Chipset Family SATA AHCI Controller to wake.

  I used my newly created installation disk and the initial phase of installation is fine, but after the first reboot, just like the Windows XP GUI interface appeared, the system crashed, rebooted and crashed again.

  The only way I could get XP install was to change the BIOS to IDE, then it installed fine. But Windows 7 does not load unless I have change the AHCI BIOS so that's what I've done so far.

  Suggestions as to how I can either get XP to install in AHCI mode or change it to AHCI mode, once it has been installed in IDE mode?

  OK, my apologies, it seems I have didn't read entirely your answer. I have BSOD stop 7B have treated several times and has been guilty of inaccurate "quick read".

  However, I gave you a possibility through response to your last paragraph...

  install the drivers for XP AHCI as it is started in IDE mode, and then change the AHCI BIOS

  .. have you tried this? What were the results?

  After thinking a bit about this possibility, it may be a good idea to restart in IDE mode after installing the AHCI driver before then stopping and switching to AHCI mode.

  As far as I know there are only two possibilities for the installation of the AHCI driver when installing XP. You dismissed one of them (Setup F6 disk) and you say that the other does not have a bootable system. Maybe you could try to "slipstreaming" once again, in which case the process did not work properly. Where did you get the drivers from making the wake? Was it the same place as the link I posted above? Absence of "slipstreaming" or the purchase of a (cheap) floppy drive, my only suggestion is that I repeated above.

  Finally, can you confirm that it is stop 7B that you get? If not what stop do you receive?

  Tricky

• [SOLVED] Windows 7 hangs during the "you want to allow this program to make changes to your computer.

  I was recently on my computer and running windows 7 with happiness and problem free, until I downloaded a file from the internet. When I opened it, windows asked me if I want to allow this program allow changes. However, there is the rub. When I click on 'Yes', the message will disappear, but the computer hangs at the screen has gone even a light, tinted gray, with all of the programs that are still running in the background. It freezes for about 2 minutes and then decides to return to normal, free for me to return to work and navigation. However, the program that I have originally intended to be performed by him to make changes didn't work at all. Confused, I ran over and over again, but with very little success, and the problem continued to appear. I tried to launch a clean boot, but that doesn't help more. Can someone help me please? Thanks :)

  Thank you for the support, but I solved the problem.

  I did a system restore, and it seems that a microsoft critical update was the culprit of all this? In any case, everything seems to work now and thanks again for all the support and help, I appreciate it a lot :)

• Equium A210-1as turns off during the Bios flash

  Hello group,

  My computer laptop girls off for a flash bios because of blocked fan (dog hairs dust etc.) and its fried bios chip.
  I think that there is a partition on the Bios chip which can upgrade the bios in a critical state of flash using combinations of keys.

  I tried all of this and have a laptop dead yet.
  I contacted someone on the net that sells preloaded Bios chips and instructions to replace them, but I must first of all identify the chip on the card.
  Is there any reading that can identify it for me on a toshiba Equium A210-1as... psafje-005005ks

  Thanks for any help Paul G...

  Hi mate

  Usually it s is not necessary to replace the BIOS ROM chip on the motherboard.
  In most cases, the ROM module has to be reflashed again.
  It seems that the module ROM was not properly flashed and the process interrupted
  The technician of the ASP can reflash the module using a disc of the BIOS crisis.

  I recommend you to get in touch with the guys from the ASP in your country and ask reflash BIOSES.

  Good luck