ADFS Configuration Wizard error
I can't after 'Specify the primaries Federation Server and Service account' page of the wizard's Configuration of ADFS. Here is the error I get:
I am trying to add a 2nd Server 2008 R2 on a farm, but I don't know (and I'm not) I have set up the first server as a "new Federation servers. I think I chose 'autonomous Federation Server' (it was almost 3 years ago). Now, the wizard of Configuration of ADFS link does not appear on the page preview or in the Action menu on the first server, so I can not re - run the wizard and change my server farm option. I also not sure what the reason for the error I get. Anyone see this before?
Hello
Apologize for the delayed response. That you try to configure the ADFS, I would ask you to send the request in the TechNet forum for better support.
Tags: Windows
Similar Questions
-
Error in the configuration wizard. Unable to connect to the router.
All connections are correct. I am able to connect to IE and FireFox with ethernet and connected my corner via "Linksys". I opened with ISP address and configure security. Is there more in the configuration I have to do?
What is the model number of your router? If the internet connection is working well, then you need not to worry the installation disc. As long as you know how to set up the router manually and able to access the interface of the router then there is nothing to worry about. It is with the disk configuration wizard is exceeded or there could be some firewall software on the computer that is blocking the setup of your router to detect Wizard. It is the most common problem I encountered, but well it's always the manual configuration. If you do not need to install and use the software just go to the linksys download site, or you can also consider using another computer.
-
vCAC6 IaaS installation fails with configuration wizard - cannot run SQL Create User command
Kia Ora.
Put together the first poc vCAC6. The devices are in place and works fine, now up to IaaS Win2k8r2 with local SQL Express and this install fails. Pre-Reqs work. Installed and patched .NET 4.5 (not 4.5.1) as well.
I installed as a local administrator on the server arrived at the field of IaaS. Installation running. EXE using run as administrator.
The installation creates the database in SQL Express premises. I slowly raised privileges to solve the problems, but the same lines are written to the LOG file and there is an installation failed.
News: 2014-01-15 09 49 58 588 h: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (BuildDB Target.
News: 2014-01-15 09 49 58 604 h: build succeeded.
News: 2014-01-15 09 49 58 604 hours: 0 warning (s)
News: 2014-01-15 09 49 58 604 h: error (s) 0
News: 2014-01-15 09 49 58 620 hours: time 00:03:35.12
News: 2014-01-15 09 49 58 667 hours: CREATE USER [serverName\Administrator] to [NVCACIAAS\Administrator] CONNECT
News: 2014-01-15 09 49 58 682 hours: EXEC sp_addrolemember 'db_owner', 'serverName\Administrator. "
Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\admin] FOR LOGIN [serverName\Administrator] command.
Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\Administrator] FOR LOGIN [serverName\Administrator] command.
Is not not a SQL guru, I tried to elevation of privileges and exchanged between using SQL and Microsoft connection. tried to hook up with a new SQL and AD security with rights to MSDB db_owner account. Also as a 'Microsoft authenticated. " each re - run provides the same statements without worrying if the localMachine\Administrator account exists or not.
Any help much appreciated.
Thank you and happy new 2014!
Hi there.
I added the administrator account of the local computer in the security of SQL Express to the sysadmin role and installation is complete. ?!? Although I tried to use the SA account to install and the same messages of error and success in this file as well newspapers runs.
Now these lines look like this;
News: 2014-01-15 10 21 50 978 hours: Service NVCACIAAS\Administrator account is the same account that creates the database. Task of grant of role of ignored by the database owner.
News: 2014-01-15 10 21 50 994 hours: Service NVCACIAAS\Administrator account is the same account that creates the database. Task of grant of role of ignored by the database owner.
If it is installed, but I don't know why I need to raise the local Sysadmin role administrator account so he could complete or why to create the user account wrong localMachine\Administrator in installation because there was.
I've rolled back to a previous snapshot and was able to repeat the failure until I added this user account to the Sysadmin role.
Her go configuration and usage vCAC now. I'll repeat the installation at a later stage.
see you soon
-
[INS 20802] Failure of the database Oracle Configuration Wizard
I am trying to install Oracle 11 g R2 on my windows 7 Professional, computer 64-bit. After 42% of the installation, it began to show that some files are missing. Few of them are:
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application. XML
And the final pop up winow wrote:
Configuration of database Assistant: Info
* "Model General_Purpose.dbc didn't exist." Please specify a model of exixting for the creation of the database. "
* "Failure [INS 20802] Oracle Database Configuration Assistant" * "
Details:
Cause:-the plug-in has failed in its method
Action:-check the newspapers or contact Oracle Support Services.
Here are the last lines of the log file. Can someone please help me solve this problem?
Oracle Advanced Security 11.2.0.1.0
Oracle Internet Directory 11.2.0.1.0 customer
A file for DB 11.2.0.1.0
Oracle Net 11.2.0.1.0 listening port
Oracle Net Services 11.2.0.1.0
Oracle Text 11.2.0.1.0
Oracle Database 11g 11.2.0.1.0
Oracle COM Automation feature 11.2.0.1.0
Oracle OLAP 11.2.0.1.0
Oracle Spatial 11.2.0.1.0
Oracle Partitioning 11.2.0.1.0
11.2.0.1.0 Enterprise edition options
Oracle Database 11g 11.2.0.1.0
INFO: OiicSaveInvWCCE: after the inventory recording. It is an installation session.
INFO: SaveInvWCCE JRE zero files: 0
INFO: Global name that appears in the action for the extra utility tools: oracle.rdbms.util
NEWS: Global location that appears in the action for the extra utility tools: C:\app\User\product\11.2.0\dbhome_1/install/config
INFO: check if the C:\app\User\product\11.2.0\dbhome_1/install/config\oracle.rdbms.util.xml file is present?
INFO: Continue with the extra utility process? : true
INFO: Copy of C:\app\User\product\11.2.0\dbhome_1\install\config\oracle.rdbms.util.xml to C:\app\User\product\11.2.0\dbhome_1\inventory\ContentsXML\ConfigXML\oracle.rdbms.util.1_0_0_0_0.xml with the og - rwx permissions
NEWS: cf session will be created for OH: C:/app/User/product/11.2.0/dbhome_1\ TLAggr: oracle.rdbms.util instancePath: inventory\ContentsXML\ConfigXML\
INFO: session of cf Oh: Aggr TL C:/app/User/product/11.2.0/dbhome_1\: [oracle.rdbms.util] instancePath: inventory\ContentsXML\ConfigXML\
INFO: No tools: 1
INFO: Start run additional tools
INFO: Utility execution: ADR installation utility
INFO: Utility execution: ADR installation utility
INFO: Command = C:\Windows\system32\cmd/c call C:\app\User\product\11.2.0\dbhome_1/bin/diagsetup.bat basedir = C:\app\User oraclehome=C:\app\User\product\11.2.0\dbhome_1
INFO: Successfully completed the utility tool: ADR installation utility
INFO: Successfully completed the utility tool: ADR installation utility
NEWS: All the tools have been executed successfully
NEWS: Full run additional tools
INFO: the oracle.installer.installUpdates property is set to false, so skip the verification of updates
INFO: Initialize JRE in Scratch Config files: 0
NEWS: stage loc: C:/users/user/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copy Aggr XML for: Oracle Configuration Manager
NEWS: stage loc: C:/users/user/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copy Aggr XML for: A the common files
NEWS: stage loc: C:/users/user/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copy Aggr XML for: Oracle Netca customer
NEWS: stage loc: C:/users/user/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copy Aggr XML for: Console DB Oracle Enterprise Manager
NEWS: stage loc: C:/users/user/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copy Aggr XML for: Database Configuration and the upgrade wizard
NEWS: stage loc: C:/users/user/AppData/Local/Temp/OraInstall2013-02-27_05-27-24AM\
INFO: Copy Aggr XML for: Oracle Database 11g
NEWS: The Top level Aggreage file = C:\app\User\product\11.2.0\dbhome_1\inventory\ContentsXML\ConfigXML\oracle.server.11_2_0_1_0.xml
INFO: OUI_CAPlugIn is not found in XML
INFO: No. tools for delete: 0 for comp: DB Oracle Enterprise Manager Console
INFO: processing tool: launching browser
INFO: remove the plugin invocation for: launch browseras, it does not support clone mode
INFO: remove the plugin invocation for: launch browseras, it does not support add node method
INFO: Namespace prefix "agg" used but not declared.
NEWS: cf session will be created for OH: C:/app/User/product/11.2.0/dbhome_1\ TLAggr: oracle.server instancePath: inventory\ContentsXML\ConfigXML\
INFO: session of cf Oh: Aggr TL C:/app/User/product/11.2.0/dbhome_1\: [oracle.server] instancePath: inventory\ContentsXML\ConfigXML\
INFO: length aggr Ref: 6
NEWS: cf session hashcode: 1847125318
NEWS: cf session recorded with key: OraDb11g_home1 oracle.server
INFO: cf session is ok
INFO: created and saved the FC session for oh: OraDb11g_home1
INFO: passing params to cf
INFO: Managing the storage of variables for aggr name oracle.sysman.ccr
INFO: This variable s_OPSNodeInfoString is not added to the map of global context
INFO: This variable b_isUNIX is not added to the map of global context
INFO: This variable b_createResponseFile is not added to the map of global context
INFO: This variable s_ps is not added to the map of global context
INFO: This variable s_oraName is not added to the map of global context
INFO: This variable s_ccrJarDestination is not added to the map of global context
INFO: This variable b_localInstall is not added to the map of global context
INFO: This variable b_doConfigCCR is not added to the map of global context
INFO: This variable b_ccrUpgrade is not added to the map of global context
INFO: This variable s_rspFilePath is not added to the map of global context
INFO: This variable PROD_HOME is not added to the map of global context
INFO: for oracle.has.common no aggregate not found by FC: no configuration
INFO: Managing the storage of variables for aggr name oracle.assistants.netca.client
INFO: This variable s_swingallName is not added to the map of global context
INFO: This variable s_shareName is not added to the map of global context
INFO: This variable s_runtimeLib is not added to the map of global context
INFO: This variable s_runTimeJar is not added to the map of global context
INFO: This variable s_responseFileName is not added to the map of global context
INFO: This variable s_operatingSystem is not added to the map of global context
INFO: This variable s_netcfgName is not added to the map of global context
INFO: This variable s_netcahelpName is not added to the map of global context
INFO: This variable s_netcaUpgradeFlag is not added to the map of global context
INFO: This variable s_netcaClass is not added to the map of global context
INFO: This variable s_netCA_Args is not added to the map of global context
INFO: This variable s_netCAInstalledProtocols is not added to the map of global context
INFO: This variable s_netAPIName is not added to the map of global context
INFO: This variable s_ldapclnt9 is not added to the map of global context
INFO: This variable s_ldapclnt11 is not added to the map of global context
INFO: This variable s_ldapclnt10 is not added to the map of global context
INFO: This variable s_jreLocation is not added to the map of global context
INFO: This variable s_jreJarFile is not added to the map of global context
INFO: This variable s_jreJar is not added to the map of global context
INFO: This variable s_jewtName is not added to the map of global context
INFO: This variable s_installTypeForLaunchNETCA is not added to the map of global context
INFO: This variable s_icebrowserName is not added to the map of global context
INFO: This variable s_helpName is not added to the map of global context
INFO: This variable s_ewtcompatName is not added to the map of global context
INFO: This variable s_ewtName is not added to the map of global context
INFO: This variable s_ewtFile is not added to the map of global context
INFO: This variable s_ewtCompat is not added to the map of global context
INFO: This variable s_cfgMethod is not added to the map of global context
INFO: This variable s_caHelpZhTwJar is not added to the map of global context
INFO: This variable s_caHelpZhCnJar is not added to the map of global context
INFO: This variable s_caHelpPtBRJar is not added to the map of global context
INFO: This variable s_caHelpKoJar is not added to the map of global context
INFO: This variable s_caHelpJar is not added to the map of global context
INFO: This variable s_caHelpJaJar is not added to the map of global context
INFO: This variable s_caHelpItJar is not added to the map of global context
INFO: This variable s_caHelpFrJar is not added to the map of global context
INFO: This variable s_caHelpEsJar is not added to the map of global context
INFO: This variable s_caHelpDeJar is not added to the map of global context
INFO: This variable s_authAdaptors is not added to the map of global context
INFO: This variable ps_netCA_Args_OverRide is not added to the map of global context
INFO: This variable b_net8ServerInstalling is not added to the map of global context
INFO: This variable b_javavmIsInstalling is not added to the map of global context
INFO: This variable b_isWindows is not added to the map of global context
INFO: This variable b_isUNIX is not added to the map of global context
INFO: This variable b_cmanIsInstalling is not added to the map of global context
INFO: This variable b_anoIsInstalling is not added to the map of global context
INFO: This variable s_xmlparservLoc is not added to the map of global context
INFO: This variable s_ouiJlibDir is not added to the map of global context
INFO: This variable s_opsmJlib is not added to the map of global context
INFO: This variable s_ntwkTools is not added to the map of global context
INFO: This variable s_netjlibDir is not added to the map of global context
INFO: This variable s_netcahelpLocation is not added to the map of global context
INFO: This variable s_netcaJlibDir is not added to the map of global context
INFO: This variable s_netcaDocDir is not added to the map of global context
INFO: This variable s_netPropertiesFile is not added to the map of global context
INFO: This variable s_netCA is not added to the map of global context
INFO: This variable s_net8caFileToInstantiate is not added to the map of global context
INFO: This variable s_jre15Location is not added to the map of global context
INFO: This variable s_jlibDir is not added to the map of global context
INFO: This variable s_inventoryPrereqOui is not added to the map of global context
INFO: This variable s_emdwLibDir is not added to the map of global context
INFO: This variable s_caHelpDir is not added to the map of global context
INFO: This variable s_assistantJlibDir is not added to the map of global context
INFO: This variable s_JavaFlag is not added to the map of global context
INFO: This variable b_isOPS is not added to the map of global context
INFO: This variable s_windowsCommandLine is not added to the map of global context
INFO: This variable s_net8caExecutable is not added to the map of global context
INFO: This variable s_netcaUserDirArg is not added to the map of global context
INFO: This variable s_installTypeForNetCA is not added to the map of global context
INFO: This variable s_netcaSilentFlag is not added to the map of global context
INFO: This variable s_netCAInstalledProducts is not added to the map of global context
INFO: This variable s_netcaClasspath is not added to the map of global context
INFO: This variable PROD_HOME is not added to the map of global context
INFO: ORACLE_HOME is not definable, is why do not define the value
INFO: Managing the storage of variables for aggr name oracle.sysman.console.db
INFO: This variable s_sid is not added to the map of global context
INFO: This variable s_serverInstallType is not added to the map of global context
INFO: This variable s_platform is not added to the map of global context
INFO: Added HashMap key oracle.sysman.console.db and a variable vector empty
INFO: Adding the s_obfOc4jAdmPasswd to the oracle.sysman.console.db global variable
INFO: Addition of the variable s_obfOc4jAdmPasswd to the global context for the whole oracle.sysman.console.db map
INFO: Adding the s_obfJtaAdmPasswd to the oracle.sysman.console.db global variable
INFO: Addition of the variable s_obfJtaAdmPasswd to the global context for the whole oracle.sysman.console.db map
INFO: This variable s_nlsLang is not added to the map of global context
INFO: This variable s_emailServer is not added to the map of global context
INFO: This variable s_emailAddress is not added to the map of global context
INFO: This variable s_cfgtyperet is not added to the map of global context
INFO: Adding the s_JtaAdmPasswd to the oracle.sysman.console.db global variable
INFO: Addition of the variable s_JtaAdmPasswd to the global context for the whole oracle.sysman.console.db map
INFO: This variable n_uploadInterval is not added to the map of global context
INFO: This localhost variable is not added to the map of global context
INFO: This variable b_launchTools is not added to the map of global context
INFO: This variable b_launchBrowser is not added to the map of global context
INFO: This variable b_isUNIX is not added to the map of global context
INFO: This variable b_centralConsole is not added to the map of global context
INFO: This variable USE_HTTP_PROXY is not added to the map of global context
INFO: This variable USE_DB_CONSOLE is not added to the map of global context
INFO: This variable SET_CONSOLE_MODE is not added to the map of global context
INFO: This variable SA_SETUP is not added to the map of global context
INFO: This variable OC4JLOC is not added to the map of global context
INFO: This variable NO_PC_MODE is not added to the map of global context
INFO: This variable LOGGING_LEVEL is not added to the map of global context
INFO: This variable JRE_HOME is not added to the map of global context
INFO: This variable ISQLPLUS_PROTOCOL is not added to the map of global context
INFO: This variable ISQLPLUS_PORT is not added to the map of global context
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the map of global context
INFO: This variable HOSTNAME is not added to the map of global context
INFO: This variable EM_UPLOAD_DISABLE is not added to the map of global context
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the map of global context
INFO: This variable EMPRODVER is not added to the map of global context
INFO: This variable CONSOLE_MODE is not added to the map of global context
INFO: This variable CONSOLE_CFG is not added to the map of global context
INFO: This variable sl_oraclehomes is not added to the map of global context
INFO: This variable s_oc4jDir is not added to the map of global context
INFO: This variable s_oc4jAppsDir is not added to the map of global context
INFO: This variable s_jreHome is not added to the map of global context
INFO: This variable s_configcommand is not added to the map of global context
INFO: This variable b_isRAC is not added to the map of global context
INFO: This variable b_UNIX is not added to the map of global context
INFO: This variable OJSP_JAR_LOC is not added to the map of global context
INFO: This variable OJSPUTIL_JAR_LOC is not added to the map of global context
INFO: This variable LDAP_JAR_LOC is not added to the map of global context
INFO: This variable JAVA_HOME is not added to the map of global context
INFO: This variable ISQLPLUS_HOST is not added to the map of global context
INFO: This variable EM_UIX_LOCATION is not added to the map of global context
INFO: This variable EM_REPOS_HOST is not added to the map of global context
INFO: This variable EM_PING_COMMAND is not added to the map of global context
INFO: This variable EM_OC4J_HOME is not added to the map of global context
INFO: This variable EM_EAR_LOC is not added to the map of global context
INFO: This variable EMDROOT is not added to the map of global context
INFO: Adding the s_oc4jAdmPasswd to the oracle.sysman.console.db global variable
INFO: Addition of the variable s_oc4jAdmPasswd to the global context for the whole oracle.sysman.console.db map
INFO: This variable s_launchBrowserClasspath is not added to the map of global context
INFO: This variable s_javapOracleHome is not added to the map of global context
INFO: This variable PROD_HOME is not added to the map of global context
INFO: Managing the storage of variables for aggr name oracle.assistants.server
INFO: This variable s_operatingSystem is not added to the map of global context
INFO: This variable s_jreLocation is not added to the map of global context
INFO: This variable pn_dboffset is not added to the map of global context
INFO: This variable cs_swingName is not added to the map of global context
INFO: This variable cs_komodoName is not added to the map of global context
INFO: This variable cs_kodiakName is not added to the map of global context
INFO: This variable cs_jewtName is not added to the map of global context
INFO: This variable cs_iceBrowserName is not added to the map of global context
INFO: This variable cs_ewtcompatName is not added to the map of global context
INFO: This variable cs_ewtName is not added to the map of global context
INFO: This variable cs_baliShareName is not added to the map of global context
INFO: This variable b_orabaseContainsOrahome is not added to the map of global context
INFO: This variable b_isWINDOWS is not added to the map of global context
INFO: This variable b_isUNIX is not added to the map of global context
INFO: This variable sl_dbmaParameterListForIcon is not added to the map of global context
INFO: This variable sl_dbcaParameterListForIcon is not added to the map of global context
INFO: This variable s_xmlparservLoc is not added to the map of global context
INFO: This variable s_ouiJlibLocation is not added to the map of global context
INFO: This variable s_oratabLocation is not added to the map of global context
INFO: This variable s_opsmLocation is not added to the map of global context
INFO: This variable s_dbuaLocation is not added to the map of global context
INFO: This variable s_dbcaLocation is not added to the map of global context
INFO: This variable s_OracleBinLocation is not added to the map of global context
INFO: This variable s_dbcaInstLaunchFile is not added to the map of global context
INFO: This variable s_dbcaLaunchFile is not added to the map of global context
INFO: This variable s_dbmaLaunchFile is not added to the map of global context
INFO: This variable s_dbmaInstLaunchFile is not added to the map of global context
INFO: This variable PROD_HOME is not added to the map of global context
INFO: ORACLE_HOME is not definable, is why do not define the value
INFO: {parameter: TOPLEVEL_COMPONENT in {aggregate: OuiConfigVariables:1.0.0.0.0:common}}: parameter data type is not compatible with the supplied String table.}}
INFO: passing params in fact FC
INFO: saves info by CF
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint: didn't found Checkpoint to return to getAllFailedCheckPoints.
INFO: Checkpoint: didn't found Checkpoint return null for getLastFailedCheckPoint.
INFO: Checkpoint file: Index written and updated
INFO: Checkpoint: file transfer remote node
INFO: update the global context
INFO: Path to "globalcontext.xml" = C:\app\User\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
INFO: Since the operation, move the current OiicAPISessionDetails to list installed
INFO: Number of root to run scripts = 0
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Finished implementing InstallDB
NEWS: Execution of the Configuration
INFO: Enter ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\app\User\product\11.2.0\dbhome_1, sTopAggId is oracle.server
INFO: Enter ConfigClient.initClientAndSession method
INFO: Status ConfigClient.initClientAndSession: connected to the framework of config
INFO: ConfigClient.initClientAndSession session started oracle.sysman.emCfg.client.CfwSession@5059a331
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@2ce90f2d
Information: Directory of newspapers Configuration - C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exit ConfigClient.init method
INFO: Phone event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream, called method
INFO: Enter ConfigClient.getToolsList method
INFO: Created the config for Oracle Net Configuration Assistant job
INFO: Created the config for the Oracle Database Configuration Assistant job
INFO: Created the job for Oracle Configuration Manager Setup config
INFO: update of transitional settings in aggregates
INFO: update of transitional settings for oracle.server
INFO: update of transitional settings for oracle.assistants.netca.client
INFO: update of transitional settings for oracle.assistants.server
INFO: Allocation of transitional value variable s_dbcaArgs
INFO: Transitional S_SYSMANPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_systemPasswordFlag
INFO: Allocation of transitional value variable s_sysmanPasswordFlag
INFO: Transitional S_HOSTUSERPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_dbcaArgsOverride
INFO: Allocation of transitional value variable windows_commandline_prefix
INFO: Allocation of transitional value variable s_sysPasswordFlag
INFO: Transitional S_SYSPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_asmsnmpPasswordFlag
INFO: Transitional S_DBSNMPPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_dbsnmpPasswordFlag
INFO: Transitional S_ASMSNMPPASSWORD variable value assignment
INFO: Transitional S_SYSTEMPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_hostUserPasswordFlag
INFO: update of transitional settings for OuiConfigVariables
INFO: update of transitional settings for oracle.sysman.ccr
INFO: update of transitional settings for oracle.sysman.console.db
NEWS: Updated transitional settings in aggregates
Information: Directory of newspapers Configuration - C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The developed /runconfig command is C:\app\User\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\app\User\product\11.2.0\dbhome_1 MODE = action = configure RERUN = true, $*.
INFO: Creates a new file C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
INFO: The option is to replace the existing C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, it saves
INFO: The backup file is called C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
INFO: Enter ConfigClient.executeToolsInAggregate method
INFO: ConfigClient.executeToolsInAggregate oAggregate = oracle.server:oracle.server:11.2.0.1.0:common
INFO: Enter ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@74247cc2
NEWS: Action of ConfigClient.assignAction is of type: configuration
INFO: Exit ConfigClient.assignAction method
INFO: Action of affected ConfigClient.executeToolsInAggregate
INFO: Started named Plugin: Oracle Net Configuration Assistant
INFO: Found associate job
INFO: From 'Oracle Net Configuration Assistant.
INFO: From 'Oracle Net Configuration Assistant.
INFO: INFO: parsing of command line arguments: INFO: parameter 'orahome' = C:\app\User\product\11.2.0\dbhome_1INFO: parameter 'orahnam' = OraDb11g_home1INFO: parameter 'instype' = typicalINFO: parameter 'inscomp' = anoINFO, Java virtual machine, client, server, oraclenet: parameter 'insprtcl' = tcp, nmpINFO: parameter 'cfg' = localINFO: parameter 'authadp' = NO_VALUEINFO: parameter "responsefile" C:\app\User\product\11.2.0\dbhome_1\network\install\netca_typ.rspINFO =: parameter "silent" = trueINFO : fact arguments.INFO of command line analysis: Oracle Net Services Configuration: INFO: configuration complete.INFO profile: Oracle Net Listener startup: INFO: listening running control:
INFO: C:\app\User\product\11.2.0\dbhome_1\bin\lsnrctl start LISTENERINFO: listener control complete.INFO: service listening for setting to start automatically.INFO: listener started successfully.INFO: listener configuration complete.INFO: Default local complete.INFO configuration naming: Oracle Net Services configuration successfully. The exit code is 0WARNING:
INFO:
INFO: Finished named Plugin: Oracle Net Configuration Assistant
INFO:
INFO:
INFO: Started named Plugin: Oracle Database Configuration Wizard
INFO: Found associate job
INFO: From «Oracle Database Configuration Wizard»
INFO: From «Oracle Database Configuration Wizard»
INFO: Running DBCA
INFO: Call command / c C:\Windows\system32\cmd C:\app\User\product\11.2.0\dbhome_1\bin\dbca.bat-progress_only - createDatabase - templateName General_Purpose.dbc-sid orcl - gdbName orcl.168.2.5 - emConfiguration LOCAL - storageType FS datafileDestination - C:\app\User\oradata - datafileJarLocation C:\app\User\product\11.2.0\dbhome_1/assistants/dbca/templates - responsefile NO_VALUE - characterset AL32UTF8 obfuscatedPasswords - false - true sampleSchema - true automaticMemoryManagement totalMemory - 3237 - maskPasswords false - oui_internal
INFO:... GenericInternalPlugIn.handleProcess () is entered.
INFO:... GenericInternalPlugIn: to configAssistantParmas.
INFO:... GenericInternalPlugIn: check secretArguments.
INFO:... GenericInternalPlugIn: Start loop playback.
NEWS: Read: SYS_PASSWORD_PROMPT
INFO: Treatment: for the tag argument SYS_PASSWORD_PROMPT - sysPassword
NEWS: Read: SYSTEM_PASSWORD_PROMPT
INFO: Treatment: SYSTEM_PASSWORD_PROMPT for the argument tag - systemPassword
NEWS: Read: DBSNMP_PASSWORD_PROMPT
INFO: Treatment: DBSNMP_PASSWORD_PROMPT for the argument tag - dbsnmpPassword
NEWS: Read: SYSMAN_PASSWORD_PROMPT
INFO: Treatment: SYSMAN_PASSWORD_PROMPT for the argument tag - sysmanPassword
INFO: End of passage to stdin of the arguments
INFO: Finished named Plugin: Oracle Database Configuration Wizard
INFO: The Oracle Database Configuration Assistant failed.
INFO: The Oracle Database Configuration Assistant failed.
INFO: Action completed ConfigClient.executeToolsInAggregate
INFO: Exit ConfigClient.executeToolsInAggregate method
INFO: Phone event ConfigToolsExecuted
INFO:
The developed /runconfig command is C:\app\User\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\app\User\product\11.2.0\dbhome_1 MODE = action = configure RERUN = false, $*.
INFO: Creates a new file C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
INFO: The option is to replace the existing C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, it saves
INFO: The backup file is called C:\app\User\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
INFO: ConfigClient.saveSession, called method
INFO: Phone event ConfigSessionEnding
INFO: ConfigClient.endSession, called method
INFO: Setup
INFO: Closing OUISetupDriver.JobExecutorThread
INFO: Cleaning, please wait...
INFO: Eliminate the object box to install controls
INFO: update of the State of STATE_CLEAN computer
INFO: Forked all the tasks are completed to the configuration of the State
Full background information: Operations
INFO: Moved to declare < configuration >
INFO: Waiting for the completion of the operations in the background
Full background information: Operations
INFO: Validation of the notice to the < configuration > State
INFO: Finished view validating State < configuration >
INFO: Validation State < configuration >
WARNING: Posting disabled for the configuration of the State
INFO: Completed state validating < configuration >
Information: Success of audit course
INFO: Get the view named [FinishUI]
INFO: View for [FinishUI] is oracle.install.ivw.db.view.FinishUI@22d215
INFO: Initializing view < FinishUI > < finish > State
INFO: Completed initialization from the view < FinishUI > to < finish > State
INFO: Displays the mode < FinishUI > < finish > State
INFO: Finished poster mode < FinishUI > < finish > State
INFO: Loading view < FinishUI > < finish > State
INFO: Installation Succeeded: true
INFO: Config Tool succeeded: false
INFO: Remote installation successful: true
INFO: Finished loading view state < finish > < FinishUI >
INFO: View location < FinishUI > < finish > State
INFO: Finished view location status < finish > < FinishUI >
INFO: Waiting for the completion of the operations in the background
Full background information: Operations
INFO: The execution of action in the finished State
INFO: FinishAction called Actions.execute
INFO: Finished execution of action to the State < finish >
INFO: Waiting for the completion of the operations in the background
Full background information: Operations
INFO: Moved to declare < finish >
INFO: Find the status of output more suitable for the current application
INFO: Exit status is 0
NEWS: Stop Oracle Database 11g Release 2 installer
Published by: rnair on March 18, 2013 10:08Installation instructions missing ear and war files because it is not followed. Both zip files must be unzipped in a folder before that setup.exe is called. See the "Directions" section on the download page - http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
https://forums.Oracle.com/forums/search.jspa?threadID=&q=WFMLRSVCApp.ear&objid=F64&DateRange=all&userid=&NumResults=15
The "model General_Purpose.dbc does not exist" error is an error in the continuation of the situation described above
HTH
Srini -
Oracle - wrong directory for spfile configuration wizard
I use management and Configuration Tools. configuration wizard to create a database model (structure and data) on Windows from an existing database.
When I try to create a database from this template on another machine, I get an error failed to create the spfile.
The reason is that on the original machine the spfile is on drive G, and I don't have a single drive on the computer target, which is C.
The location of the G drive is specified in the audit_file_dest model, background_dump_dest, core_dump_dest and user_dump_dest.
The problem is that there no place in creating a model, or the creation of model db, to edit these locations and specify another directory.
Is there a way to disable using spfile during the creation of the model on the original machine? Or an another workaround?user4459361 wrote:
I use management and Configuration Tools... etc...The location of the G drive is specified in the audit_file_dest model, background_dump_dest, core_dump_dest and user_dump_dest.
... etc...
Is there a way to disable using spfile during the creation of the model on the original machine? Or an another workaround?You can change the template, it is just an xml file.
: p -
Linux silent installation stops at >; begins to run the configuration wizards
I use putty to perform a silent installation of db oracle 10g on my remote (redhat) server through the command line:
. / runInstaller-silent - responsefile /tmp/enterprise.rsp
It works fine until you reach > start to run the configuration wizards, where I get no additional response or even errors, it crashes just saying that, here's a summary:
--------------------------------------------------------------------------------------
Current installation (Wed Oct 29 18:06:32 CST 2008)
............................................................... 11% of fact.
............................................................... 23% of fact.
............................................................... 35% of fact.
............................................................... 47% of fact.
........................................... 55% of fact.
Successful installation
Bind in progress (Wed Oct 29 18:08:54 CST 2008)
. 55% of fact.
Link with success
The current setup program (Wed Oct 29 18:10:07 CST 2008)
.................... 100% of fact.
Successful installation
End of the phases of installation. (Wed Oct 29 18:10:13 CST 2008)
Begins to run the configuration wizards
----------------------------------------------------------------------
What should I do to solve this problem and the installation completes successfully?Hello
the first on the ps and grep commands, you are right on the line 1, which is the command line:
to avoid that you can do
PS - DTS | grep-i runinstaller. grep - v grepAfter you have used the user fuser, it gives you the process id 32275
so with the PID number you can do:
PS - DTS | grep 32275This will give you the application that is currently running and pointing to the log file.
Although fuser * shows that the log files are still used?
Yes it is but the name of the process is different. so try to grep for your PID number.Sorry, I always do silent installation at the beginning and clone the database after.
I remember that I used the wizard dbca-silent - responsefile /local_dir/dbca.rsp
Also the netca (network configuration assistant) is performed during installation?What should I do to solve this problem and the installation completes successfully?
You want to run the netca and the dbca after the software is installed?I do not use dbca.rsp because I did not choose the advanced configuration of database in my enterprise.rsp, and IE that using dbca.rsp is just incase I choose advanced configuration which is number = 2.
So what settings do I need to switch to the runInstaller, am I still missing something that prevents installation stuck without giving answers or errors?After the installation is carried out with the silent mode, can you please check which process is still written on the installation log files?
Otherwise, try for example running sqlplus (control that all you stuff environments is implemented as a path, ORACLE_SID, ORACLE_HOME, etc...)
This command works?
-
How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences. I have widows xp pro
Hi Plumbbgp,
1. what brand & model of the scanner?
2. the scanner was working fine before?
3. don't you make changes on your computer before this problem?
Please provide us with more information about the issue so that we can provide you with the necessary assistance.
-
How to use the automatic configuration wizard and where can I FIND?
How to use the automatic configuration wizard and where can I FIND?
Hi TannySmedt,
To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel. If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools. If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic. This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.
The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:
net start wzcsvc
To stop the automatic Wireless Configuration, run the following command:
net stop wzcsvc
-
What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt.
I always get this message in a long horizontal area on my desk top once I restart and turn on my computer.
Thank you
"Privoxy" is a 3rd party is no program not part of Windows XP. You can go to
Panel-> Add/Remove programs
and remove this program. If you still think that you need this program, try reinstalling it on Sourceforge
<>http://sourceforge.NET/projects/ijbswa >HTH,
JW -
Oracle Fusion Middleware Configuration Wizard does not display alternative OAM
@
I m install OAM. I installed Weblogic and the MRI suite. When I start the Oracle Fusion Middleware Configuration Wizard, I expect to see an alternative to choose to create a new domain or use an existing one. Im not seeing this and rather Im getting a text information of General information. When I click Next I get only the alternative to configure OIM OAM not or any other component.
No idea why this is?
Hello Stefan,
Where you start the config.sh from? It must be run from $MW_HOME/oracle_common/bin/config.sh
You can then select either a new domain or extend an existing domain, where you can select Oracle Access Management.
Kind regards
Jeffrey
-
"Cannot find the dbcodes file": PeopleSoft database Configuration Wizard
Hello
I am setting up a new installation of PeopleSoft, based on a copy of the record of my client PS_HOME. I installed before PeopleSoft, but I used the latest versions and started from scratch. Now I use PS HRMS 8.9 and PT 8.48 on a Windows 2003 server. I followed the manual to install 8.48 PT (installation of third party tools, using configuration manager), except for the wizard to install PT, because the files are already there. I changed all config files I had to include suitable locations for PS_HOME, Oracle database drivers, etc.
Now, I'm trying to use the database Configuration Wizard to automate the creation of the database using Oracle 10.1.0.5.0. After you have selected a non-unicode database, I click Next, select the character set, and then when I click Next again once I get the message "Cannot find the dbcodes file."
I checked in the folder PS_HOME/setup and there are two dbcodes files: dbcodes.pt and dbcodes.hc. It is originally a kind of confusion, or the wizard missing the dbcodes file somewhere else? Or maybe that's another question altogether, I'm not sure.
Thanks for the help.
To start with PS_APP_HOME introduced in PeopleTools 8.52.
On the road to Peoplesoft: Peopletools 8.52: the PS_APP_HOME variable
As you run on PeopleTools 8.48, the application is installed in the PS_HOME.
ptengs. DB is used to create a single database of PeopleTools, you try to create a database of HCM. This file will not be used when creating your database.
If you want to create your copy of HCM all files from 'PS_APP_HOME' to PS_HOME database and start Data Mover with option to create database.
Should do the trick.
-
This is the error I get when trying Adobe Premiere of 13 elements of the configuration. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements. How to work around this issue and get this downloaded.
Lisa, please try of products download Premiere Elements | 10, 11, 12, 13 and let us know if you need help with this.
Atul_Saini
-
Error is displayed: "Test Access ID and password failed."
Second error: "unable to test the connection.
I am upgrading from 8.53 to 8.54 and have problems with the "Database Wizard" configuration screen in the wizard to change. I use SQL Server 2012 for the database, change Wizard is running on the new server of 8.54 applications. I use the following information when defining the configuration screen:
Type: Microsoft SQL Server
DatabaseName: PSHRPROD
Database server name: PTY2DBAREH002
User name: {AdminUser}
AccessID: {DB user who is administrator system right now}
ConnectID: {valid connect ID which has been vailidated}
Current homes:
PS homepage: \\servername\PT_853
PS App Home: file://servername/PT_853\\servername\PT_853
PS Cust homepage: \\servername\PT_853
New homes:
PS-home: D:\rootPS\PT_854
PS App Home: D:\rootPS\PS_APP_HOME
PS Cust home: D:\rootPS\PS_CUST_HOME
When I clck 'Next', I get errors...
Error is displayed: "Test Access ID and password failed."
Second error: "unable to test the connection.
(1) I have validated that the path contains the path to 64-bit SQL tools.
(2) the ODBC connection is set up under 64-bit and 'System' - it is also 32 bits of the system and user Setup, but also the 64-bit user.
(3) I used the SQL Server sqlcmd.exe with access code and was able to connect from this machine and run the SQL commands.
(4) I'm sure I've done the other stuff but don't remember.
Please let me know if anyone experienced this or has any ideas. I'm waiting on Oracle to react to the case after I opened it when their suggestion didn't work.
Thank you
Ryan
I ended up working with Oracle Support, that had me do some things... I also did a thing on my own and with these changes, I am able to connect now. If it does not please let me know... I tried a few other things that I don't think had no effect.
(1) removed the Environment Variable "PS_SERVER_CFG" - I found in a document oracle that this could cause problems. I have not set this manually, but Oracle says it is used to run data mover or SQR scripts outside of the process scheduler. It must have been added as part of the installation so I'll add it again later. This change did put a slight change to error messages, so it have some effect, but does not solve everything.
(2) with the upgrade of 8.53 8.54 I had to add a 32-bit ODBC user DSN. Even if change assistant 8.54 uses 64-bit, it seems that 8.53 connections are still serving who connects via ODBC 32-bit.
(3) make sure that the paths configured in the wizard to change are not UNC, if they are matched with a drive and configure using readers.
Good luck.
-
We are on PT 8.53.04 and end/SCM 9.10 Windows/MS-SQL
Change Wizard is run on the Windows Server, not the client
Other users can run Assistant change without problem, but I get the below error after I connected, validated configuration and click "apply packages:
As I said, it is run on the server and others can use it OK, so this isn't the CA configuration that is the problem. Does anyone have an idea how I can reduce this problem?
Thank you
2844096
Yes, I think that this has something to do with the zip file, you try to use or have permissions to it. the extractProject is probably trying to remove the project zip file and can't. I would look at the file updxxxxxx.zip see if your username can read or extract properly.
-
VCSA 5.5u3d setup wizard error (single sign-ON)
Nice day.
I got an error message when you deploy vcsa in the start (in step "Configuration of SSO") Assistant:
Cannot run ' / usr/sbin/vpxd_servicecfg "sso" 'writing' "embedded" CENSORSHIP CENSORSHIP "typed-pass": "
VC_CFG_RESULT = 702 (error: an unexpected error occurred during the installation of the SINGLE of the device authentication service.) Please put together a support group and file a service request)
I've seen a lot of discussions about this error, and in almost all cases, the resolution is the correct dns resoving. Here is the output of vcsa itself:
VCSA: ~ # hostname
VCSA.uitisk.local
VCSA: ~ # nslookup vcsa.uitisk.local
Server: 10.12.0.2
Address: 10.12.0.2 #53
Name: vcsa.uitisk.local
Address: 10.12.0.70
VCSA: ~ # nslookup 10.12.0.70
Server: 10.12.0.2
Address: 10.12.0.2 #53
name 70.0.12.10.in - addr.arpa = vcsa.uitisk.local.
VCSA: ~ # ifconfig
eth0 Link encap HWaddr 00: 0C: 29:5 D: 32: 24
INET addr:10.12.0.70 Bcast:10.12.0.255 mask: 255.255.255.0
ADR inet6: fe80::20c:29ff:fe5d:3224 / 64 Scope: link
RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
Fall of RX packets: 1466 errors: 0:0 overruns: 0 frame: 0
Dropped packets: 1360 TX errors: 0:0 overruns: 0 carrier: 0
collisions: 0 txqueuelen:1000
RX bytes: 291865 (285,0 Kb) TX bytes: 283303 (276.6 Kb)
Lo encap:Local Loopback link
INET addr:127.0.0.1 mask: 255.0.0.0
ADR inet6:: 1/128 Scope: host
RACE of LOOPING 16436 Metric: 1
Dropped packets: 86518 RX errors: 0:0 overruns: 0 frame: 0
Dropped packets: 86518 TX errors: 0:0 overruns: 0 carrier: 0
collisions: 0 txqueuelen:0
RX bytes: 22701701 (21.6 MB) TX bytes: 22701701 (21.6 MB)
VCSA: ~ # cat /etc/resolv.conf
nameserver 10.12.0.2
nameserver 10.12.0.3
So, as you can see there is no problem with the resolution of FQDN.
If I try to configure PASS-THROUGH authentication in the web interface and not through the wizard, I got the error without name, however the result of the test of the SSO settings is OK.
Any ideas?
Ok then. The problem is resolved.
I took the other version of the VCSA (5.5u3b instead of 5.5u3d), done the same things as before, but also I noticed that there is no option 'domain' dans/etc/resolv.conf, so I added it. All the steps I did:
1. Add "domain uitisk.local" for the short name resolution.
2 disable ipv6 (in/etc/sysconfig/sysctl)
3. change the time zone to VCSA to redevelop link to/etc/localtime
4. fix the time synchronization ESXi on which VCSA is deployed.
I guess the main step is the 1.
Maybe you are looking for
-
I have updated to Thunderbird to Earlybird.
When I receive emails they show in the Inbox but I click on them to see them. It didn't happen with TBird.
-
Satellite C70D-A-111 - cannot print using network printer but the work of USB connection
I added this Satellite C70D-A-111 to an existing network that includes a printer.Other devices can print OK but not this Toshiba.The message is "printer is in an error state. If I connect the Toshiba to the printer via the USB port, it prints OK. Can
-
The green bar on the half of the video after having been published in movie maker
When I use windows movie maker to edit my videos everything seems good and when I save the bottom half of the video is transformed into a green bar. Why? What can I do to fix this? I use vista.
-
HP photosmart c4200. Difficult to set up my printer to my new iMAC.
22/04/14 Hello I desperately need help to install my printer to my new iMAC. I did not and feel frustrated easily... I have a HP Photosmart C4200. I just bought a new iMAC that is and OSX 10.9.3 I looked on line through HP to see if I could find a dr
-
Question about scaling for orientation landscape
I noticed when you use the Simulator BB10, my app is scaling according to the reported resolution of 768 x 1280 instead of 1280 x 768. For this purpose the application is updated to be the incorrect scale. If the application is configured to start in