Linux silent installation stops at > begins to run the configuration wizards

Similar Questions

• How to apply the u9803629.drv patch to run the Patch Wizard?

  How to apply patch u9803629.drv 11i using the $AD_TOP/bin/adpatch from the command line? to run the Patch Wizard?
  
  Don't know how to install this patch and appreciate the guidance in this area. Thank you

  Hello

  This fix should be applied by the adpatch utility.
  Hit adpatch commnad line and answer prompts that there.

  Thank you

  Buxant

• In Vista, the software installs stopped working unless I run as administrator

  I'm running Vista, and about 3 weeks ago I started to be impossible to install anything (for example the automatic updates of Adobe or Firefox), at least I have download and run them as an administrator from a command line.  Clearly, I have a permissions problem with the my login ID... but I don't know how this happened or how to go back to the way that it used to work.  I would like suggestions.  Thank you

  Here are the rules:
  You cannot install, uninstall, change settings, create accounts user etc etc, unless you are:

  1. a Director or
  2. in possession of an admin password.

  If you have logged a administrator account and you are trying to do, install a program, you will be asked to leave. In this case, all you have to do is click Yes or Continue.
  If you are connected to a standard user account, and you are trying to do, install a program, you will be asked to enter the admin password before the system will proceed with the installation.

  That's how the system works.

• OfficeJet 8720: Re-run the Setup Wizard on HP OfficeJet 8720

  I can't connect to my wireless printer.  When I press the wireless button, a message appears that says: "this feature has been disabled.  Contact the person who set up the printer.  Unfortunately, it's me and I want to rerun the Setup Wizard to start the installation.  How is that possible?  Thank you.

  Hi @204650863,

  Thanks for dropping by the HP's Support Forums! I see that you do not want to reconnect to your HP Officejet 8720 to your wireless network. When you try to do that, you get a message that the feature has been disabled.

  You should be able to do this by restoring the network defaults in the front panel. Follow the steps below:

  Icon Wireless > Wireless menu > restore default network values > Yes

  I also noticed that you use the Mac OS X 10.6, in order to install the printer you need to install a Mac printer driver using Apple Software Update

  Click on the link above to start. What are the results? You are now able to access the control panel and connect the printer to your network?

  I'll watch for your reply. If you want to say thanks for my effort to help, click on the "Thumbs up" to give me a "Bravo".

• CC Adobe on my new Mac Pro does not complete the installation after running the Migration Wizard

  Hey guys, just bought a mac pro, and assistant of migration used to transfer my programs, now adobe cc stops half way through installation and said: cc adobe, requires to solve this problem, is damaged or missing, download and install adobe cc on "http..., tried to download it again, did not work, anyone who knows what to do?"

  Hello

  Creative cloud apps cannot be migrated as a return to the top, you will need to download and install apps as a new on the new machine, please follow the steps below to remove and reinstall the creative cloud application:

  1 force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)

  3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager )

  4 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  5. browse to the Application Support > Adobe > trash folder OOBE and AAM Updater folder so

  6. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  7. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD

  8 - go to the Apple icon > System Preferences > privacy and security > firewall > OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  9 - go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be put on ANYWHERE

  10 - Make sure of course there is no other program security Internet enabled - if it is then go ahead and launch CC app and login and check (check your extensions as well id browser it disable any toolbar security or advertising, blocking of extensions you installed them)

  Adobe 11 - run cleanup tool. > If so, select "Adobe Application Manager for Mac OS X 10.6 ' and then click on"Clean up selected. "

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  12 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

• installation stops with a "cannot detect the last level cache.

  ESXi 5.0 installation process stops with a message "cannot detect the last level cache.

  VMware ESXi 5.0.0 [Releasebuild-469512 x86_64]
  Cannot detect the last level cache
  CR0 = 80010039 cr2 = 0 x 0 = 0x3e7000 cr4 = 0 x 2038 cr3
  PCPU0:2048 / bootstrap
  PCPU 0: S
  Beginning of the code: uptime VMK 0 x 418013200000: 0:00:00:00.890
  6 lines of < no symbol > errors
  Basic FS = 0 x 0 gs = 0 x 418040000000 kg = 0 x 0
  No space on disk for the dump data.
  Debugger waiting...

  switching LSI based SAS controller to port sata3 onboard has not changed a thing

  Oh, here the specifications:
  Processor Intel i5 2500
  16 GB OF RAM
  ASUS P8H67-M Board

  any ideas?

  Hi all

  I had the same problem after turning on in BIOS "Max CPUID Value Limit" to activate option.

  Disabling above option help me to install vmware esxi 5.0

  Anatoliy

• I bought Lightroom 6 for MAC somw earlier. Now, thanks to a system remains, I can't install LR6 more. Installation stops with an error message: The Adobe Support Advisor was discontinued the Adobe Support Advisor tool served to ana

  Does anyone have an idea what to do?

  Thanks in advance

  If the error mentions the installation program was unable to initialize:

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Drag &amp; Drop - increasing the action in the action of the object area begin to run the slide

  In the slide drag and drog I use the Action object to a target object. I would like to increase the value of a user variable when the learner move the source properly object to the target object. Without this object Action, the blade was arrested after 1.5 s how you described. This is the correct way. But if the Action of the object has been used, the slide stop. So what do you think, is it a problem of understanding or is this an error in the program? Could you send me your appreciate the opinion? Cordially to Leobersdorf in Austria by Gerhard.

  

  Hello

  You will find the solution in my blog: advice & glide - Captivate blog

  The problem is that a simple gesture, like you use it for the action of the object, always free the read head. You will need to replace it with a tip or shared action standard. Same situation happens everywhere when you raise a simple action: Why choose Standard Simple action?-Captivate blog

• What is required to run the DBCA Wizard

  Hello
  
  In collaboration with AIX 6.1 and Oracle 11.2.0.1. My installation of the oracle software was made using ora10g: the user oinstall. I am able to create the database using DBCA using ora10g user. I created a more oragrid of user who is a member of oinstall but not able to create the database using DBCA. It gives an error TNS lost contact. So, apart from making oragrid member of oinstall, what else is necessary.
  

  bash-3.2$ id
  uid=311(ora10g) gid=311(oinstall) groups=321(dba)
  
  bash-3.2$ id
  uid=313(oragrid) gid=311(oinstall) groups=1(staff),321(dba)
  
  bash-3.2$ ls -lrt
  drwxrwxr-x    3 ora10g   oinstall        256 Aug 21 12:28 cfgtoollogs
  drwxrwxr-x    8 ora10g   oinstall        256 Aug 21 12:59 app
  drwxrwxr-x    5 ora10g   oinstall        256 Aug 21 13:02 diag

  Kind regards

  Because the installation is carried out by ora10g, so the behavior you're seeing is expected. oragrid has no right of ownership in the ORACLE_HOME /. A solution to your problem is the use of the sticky bit. The sticky bit is used mainly on shared directories.
  for example

  chmod 2775
  or
  chmod + t

  bash-3.2$ touch a
  bash-3.2$ ls -ld a
  -rw-rw-r--    1 oracle  oinstall          0 Aug 24 13:47 a
  bash-3.2$ chmod 2775 a
  bash-3.2$ ls -ld a
  -rwxrwsr-x    1 oracle  oinstall          0 Aug 24 13:47 a
  

  In this way, your oragrid and ora10g both will be able to perform the DBCA or administrative tasks.

  Kind regards
  S.K.

• Windows Firefox 29 silent installation

  I've been scouring the internet for a while looking for a way to do a silent install of Firefox via command line. As I just discovered, the - ms and the/ini methods only work in many older versions of Firefox.

  When I try install the silencer - ms, the first half of the install works fine, until it gets to the second half. As it appears, the second half asks first of all the admin password (which is didn't need), then it proceeds to the second half very visible installation (another click to download and install Firefox and other useless to ask the admin password).

  What I think happens is that the first Setup is actually just to install another Installer (in the appdata/temp folder) and then open this installer and remove it when it's done. This second installation program does not support the command - ms operating on its own.

  Anyone got any ideas?

  Found the answer.

  I went and that reported on bugzilla, and after talking more with someone, it has been revealed that he has no intention to include silent install for the installer General "stub" based. But the silent install does it work if you use the full Installer (which does not use the double installation found in the general installation program and can be downloaded here: https://www.mozilla.org/en-US/firefox/all/ )

  The full installer does regular support - ms silent installation. To get rid of the requests for authorization of the admin, just run it high (aka: run as administrator).

  After this conversation, the mozilla wiki has been updated accordingly: https://wiki.mozilla.org/Installer:Command_Line_Arguments

• Installation BI applications Oracle 11g sur-erreur AIX 7 Configuration to the configuration of the ODI

  All,

  I installed oracle bi application for 11.1.1.7.1 AIX 7.1 server. My process of BI applications configuration is to launch a mistake in the part configuration ODI.  Detailed error is pasted below. I perform software only installation as with AIX, you must select Install only software for OBIEE and OLIVIER and configure BIAPPS later.

  I saw two others archived son who discusses this error, and it seems that it is events expected for deployments of AIX error. And both of them say that it is ok to continue the Setup process and make this ODI configuration for later.

  However, the instructions on how to do this from one of the thread is fragmentary or incomplete. If you guys have run into that, can you please guide on how you have been able to solve this problem? The location for 2 OTN discussion is stuck here as well.

  Re: OLIVIER 11.1.1.7.1 install the mistake out to ODI configuration

  Re: Installation OBIA 11 g - stuck to the configure script

  Error:

  configure_odi: problem invoking WLST - Traceback (innermost last):

  configure_odi: file ' < userpath > / Oracle/Middleware/Oracle_BI1/bifoundation/install/configure_odi.py ", line 261, in?

  configure_odi: file ' < userpath > / Oracle/Middleware/Oracle_BI1/bifoundation/install/configure_odi.py ", line 206, in _configureOdiDwIntegration

  configure_odi: at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  configure_odi: to sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:56)

  configure_odi: to sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:39)

  configure_odi: to java.lang.reflect.Constructor.newInstance(Constructor.java:527)

  configure_odi:

  configure_odi: java.lang.Exception: java.lang.Exception: update of the database of the DW_FILE server failed with return code: 1

  configure_odi:

  java.lang.Exception: java.lang.Exception: WLST Script task failed with status 1

  at oracle.as.install.biapps.biappsconfig.standard.ODIConfigTask.doExecute(ODIConfigTask.java:65)

  at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)

  at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)

  at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)

  at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)

  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)

  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)

  at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)

  at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)

  at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)

  at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)

  at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)

  at java.lang.Thread.run(Thread.java:738)

  Caused by: java.lang.Exception: WLST Script task failed with status 1

  at oracle.as.install.bi.biconfig.standard.WLSTScriptTask.doExecute(WLSTScriptTask.java:119)

  at oracle.as.install.biapps.biappsconfig.standard.ODIConfigTask.doExecute(ODIConfigTask.java:62)

  ... 12 more

  RP

  So, that's what we were doing to solve this problem:

  1 let the Configuration process continue with the error. All other tasks should complete successfully.

  2. install the ODI studio on a client computer, WIndows/Linux.

  3. manually the program installation/editing file server and data server technology tab.

  RP

• WES7: 'Windows cannot access the installation sources. "Check that the installation sources are accessible and restart the installation.

  I try to install Windows Embedded Standard 7 on an vacuum Compact Flash 4 GB but when installing, I get an error message "Windows cannot access the installation sources. "Check that the installation sources are accessible, and run the Setup again."

  I created an answer file with the Configuration of Image Editor and I created an Image of the IBW of my answer file. All the files and the Image of the IBW (738 MB) files are copied to a USB bootable 4 GB. I inserted the Flash DRIVE to a computer with a Compact Flash 4 GB (which contains only a primary NTFS partition set as Active) and it starts on a USB key. IBW Wizard starts and I followed the instructions until the disk selection step. I chose the disk and partition of Compact Flash and I press the next button. First 2 installation steps manage (copy of Windows files and extend Windows files) but 3rd step (installing features and updates) failed with the error message "Windows cannot access the installation sources. Check that the installation sources are accessible, and run the Setup again.'.»

  I tried to do the same thing with a Compact Flash 4 GB, which contains 2 partitions: a primary NTFS defined as active and a system partition, but I got the same result. Then I tried to install it on a Compact Flash 8 GB which contains 1 single defined primary partition as active and I managed.

  Problem is that I must install on a Compact Flash 4 GB.

  Can someone help me please?

  For Windows Embedded-related problems, please post in the forum on TechNet:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsembedded

• Run the report and form 12 c

  Hello

  As in D2k we where using ifrun.exe to run the Oracle report and form module giving a parameter, in the form of 12 c and point out how we're going to run the package.

  In the ifrun.exe target us where giving as

  C:\ORANT\BIN\ifrun60. EXE C:\ERP\ERP\ERPMODULE. FMX erp/erp@erpksy

  Sandy

  Please see the documentation.  Windows 10 is not a certified platform.  The installation program performs a check to determine if the platform you are installing on is acceptable.  Probably, he sees that you're on Win10 and exits.

  Reminder, the basic steps to install are the following (don't forget first install Windows loopback adapter if the machine doesn't have a static IP):

  1. install the JDK 8U51 + (x 64)

  2. install WLS Infrastructure 12.2.1

  3. install the forms/States 12.2.1

  4. run the repository creation utility (RCU)

  5. run the Setup Wizard (to create the domain)

  6. start the WLS Node Manager, Server Admin and WLS_FORM.  If Windows, you must use a DOS shell with administrator privileges to do this commissioning initial.  Otherwise will result in the field not be created properly.

  Guides to the system requirements and the Installation Guide is located in the library of Doc here:

  http://docs.Oracle.com/middleware/1221/formsandreports/index.html

  The matrix certification can be found here:

  http://www.Oracle.com/technetwork/middleware/Fusion-Middleware/documentation/FMW-1221certmatrix-2739738.xlsx

• the configuration after the installation of forms 11g has not

  Hi all
  I was installed forms and reports 11 g successfully.
  WebLogic: 10.3.2
  Forms and reports: 10.1.1.2
  
  My problem, progress of configuration does take long time for the "AdminServer restart" task and I expect a lot of hours
  and still no progress
  
  Please help me
  
  Best regards

  FormsEleven - Posted the: December 7, 2010 04:46

  I think that Windows 7 is supported as a developer box. This means that you can install EM and other components of the system.
  Simply select forms & reports execution time and builder and your configuration must go through the fine.
  >
  In fact, forms 11g is the only version of forms/States manufacturers certified for Windows 7. The key is to open the properties of the SETUP.exe and select "Run this program in Compatibility Mode for Windows XP SP2" and change the settings for virtual memory (VM) to manual and specify a setting of at least 1024 MB VM. The Oracle installer cannot detect the settings of the virtual machine when Windows automatically manages the parameters of the virtual machine. After you have properly installed and configured WLS and forms/States, you can change the setting of the virtual machine to run Windows.

  user1079072 - posted: December 7, 2010 06:55

  I'm install forms 11g for reason to use shapes and generating reports and I have no need for forms or States >
  If you plan to run a form or a report of builders, then you need to forms and reports Services installed and configured successfully. If you do not have to run a form or a State of builders, so it is not important for these services must be configured.

  user1079072 - posted: December 7, 2010 01:43

  I select portal and discoverer in the installation
  I didn't OID or a proxy server
  I have install weblogic, forms and reports to the same machine >
  After installing Weblogic Server (WLS), blew the WLS configuration? If you have run the configuration, it is probably the reason for the failure of 11g Oracle Fusion Middleware (OFM) configuration. According to Oracle install instructions for OFM 11 g, you ignore the configuration of WLS, as 11 configuration process g of BCI will perform all the necessary configuration for WLS and BCI. (Take a look at the document My Oracle Support: how to install Fusion Middleware 11.1.1.1 / 11.1.1.2 reports only [854117.1 ID] for detailed installation instructions and forms).

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• I can't run the Microsoft Fix it Center. The message I get "error Troubleshotting Wizard cannot continue.

  I just installed Microsoft Fix it Center. Now I can't run the Troubleshooting Wizard which gives?

  Hello
  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try the running System File Checker and see if it helps:
  http://support.Microsoft.com/kb/310747

  Method 2:
  Try running disk error checking and see if it helps:
  http://support.Microsoft.com/kb/315265

  It will be useful.