Adjusting the Touchpad - what a Drag

Similar Questions

• adjust the touchpad Inspiron1525

  I have problems with my touchpad is so sensative than just waving a finger on it moves the cursor.  A disappointment when you're tyring to type.  I can't find a way to join the touchpad adjustment program.

  Thanks for the help

  Duane

  Hi Duane,

  I wish that you follow the steps in the article to resolve the problem.

  The Touchpad sensitivity setting

• How can I change the sensitivity of the touchpad on my laptop Windows 8 Samsung series 3?

  I can't find a setting that allows me to adjust the touchpad sensitivity.  I can pinch to zoom in with ease, but I can't two fingers scrolling unless I dig my nails into the protector with strength.  And, even then, it works sometimes.

  Settings-> Imput gives me only option to turn the touchpad on or off.

  Control Panel-> hardware and sound-> Synaptics TouchPad V7.5 gives me options to set the speed and to turn on or off certain functions of drag.

  Control Panel-> currencies and printers-> mouse gives me left - and right handed options, double-click speed options, pointer options, wheel (which does not have this computer) options, etc.

  Where else is there to look at?  Help!  Thank you!  :)

  Hi Michelle,

  I suggest you to refer to the many suggestions in the article.

  How can I change the settings for my touchpad of Windows 8? Scroll and click on the problems.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-TMS/how-do-i-change-the-settings-for-my-Windows-8/a0349e35-B090-42fb-A586-feac551a0100?msgId=4a2ad260-7B4F-42FC-8556-a606bbce212a

  You can also consult the "Resolution" section of the problems with your touchpad when you click on 'more' in the article.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows?T1=tab04#V1H=tab05

  Note: It also applies to Windows 8.

  Hope this information helps.

• I plugged a wireless mouse for my laptop, but I can't seem to disconnect the touchpad

  I plugged a wireless mouse for my laptop, but I can't seem to disconnect the touchpad, what should I do?

  Hello Roberto,

  On how to disable the trackpad on a DELL computer, contact DELL.

• Disable scrolling on the Touchpad

  Hi... anyone know how to get rid or disable the pointer appearing after moving via the touchpad suddenly a box small just above the pointer tht looks like the scroll bar installation but it's boring as he moves to the quick screen upward or downward or through, and its now so boring I wish to disable but do not know how too

  Thank you very much

  Hello
  You can adjust this to your mouse control panel.  Here's how:
  1 type the word mouse in your Start menu, then choose mouse option that appears.
  2. According to your brand of computer, you'll see a Touchpad tab or button to adjust the touchpad settings.  If you do not immediately see it, check the Hardware tab, at the top, which usually have a settings... button to access the options of the touchpad.
  3 - once there, you can adjust or turn off the "Scroll Zones" or "simple gestures of the fingers.  These names may be different depending on who built your computer, but it will be probably pretty close to this.
  Please reply back if you have any problems,

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

• HOW TO TELL (MULTIPLE TRACKS) ON A MUSIC AUDIO PLAYING IN THE SAME SCENE? AND WHAT I NEED TO ADJUST THE VOLUME DURING PLAYBACK OF THE TRACK - OR WHO WILL BE AUTOMATIC AS SOON AS I START THE NARRATION?

  ON MOVIE MAKER - I'M TELLING ON A TRACK THAT PLAYS WHILE THE PHOTOS ARE DISPLAYED.

  1. HOW DO I TELL ON THE MUSIC TRACK PLAYING?

  2. DO I HAVE TO SET THE COLUME ON THE MUSIC TRACK - OR - THE MUSIC WILL AUTOMATICALLY ADJUST ONCE I HAVE START THE NARRATION?

  3. WHEN I FINISH a SEGMENT OF THE MOVIE - AND "SAVE THE PROJECT" - HOW DO I INSERT IT IN THE FILM COMPLETE?

  I HAVE TO SAVE AS WINDOWS MEDIA? WHAT I HAVE TO PUT IT ON A DVD? ... AND THEN INSERT IN MY COLLECTION AND THEN ADD THE FINAL MOVIE?

  PLEASE NOTIFY

  1. HOW DO I TELL ON THE MUSIC TRACK PLAYING?
  =================================================
  Apparently you have imported a file of music to your slide show and you
  want to add narration also. I think would be best to delete
  the music file for now, create your narration, and then replace it
  music file.

  The problem of having two audio tracks playing simultaneously?

  You must save the slide show / narrative as one. WMV Movie file...
  File / save movie file. Then reimport them saved. Just the WMV video file
  as you would for any other video and audio music will be
  clear for you to add your music files. The volume of the tracks can be
  adjusted to... Right click / Volume, drag the slider.

  =================================================
  2 CAN I ADJUST THE VOLUME ON THE PIECE OF MUSIC
  -OR - THE MUSIC WILL AUTOMATICALLY ADJUST ONCE I HAVE START
  NARRATION?
  =================================================
  The removal of the music file will clear this up.
  =================================================
  3. WHEN I FINISH a SEGMENT OF THE MOVIE - AND
  'SAVE PROJECT' - HOW DO I INSERT IN FULLY
  FILM?
  =================================================
  In addition to "Saving The Project" (for the future edition)...
  Save the movie file in the... WMV format.

  Then you can import the saved. WMV video file and
  Use it in a project as you would for any other... WMV
  video file.

  =================================================
  I HAVE TO SAVE AS WINDOWS MEDIA?
  =================================================
  . WMV would be the format of the recorded movie.

  DV - AVI is also an option, but the file size will be much larger.
  I'll add options at the end of this registration message.

  =================================================
  WHAT I HAVE TO PUT IT ON A DVD? ...
  =================================================
  No, just save to a folder on your hard drive.
  =================================================
  AND THEN INSERT IN MY COLLECTION AND THEN ADD
  FOR THE FINAL MOVIE?
  =================================================
  As stated previously, just reimport him. WMV video and use it
  as you would for any other video clip.
  =================================================
  The following article is maybe worth a visit:

  Record a narration in Movie Maker 2 and some of the
  You may encounter problems of microphne.
  http://www.mightycoach.com/articles/mm2/narration-moviemaker2.html

  the following video tutorials may be worth a visit:

  Windows Movie Maker 2 tutorials
  http://www.atomiclearning.com/moviemaker2
  (in the 'I' section there is a clip called: "Narrating your")
  film project")

  More tutorials:

  Articles and tutorials for Windows Movie Maker
  http://www.windowsmoviemakers.NET/tutorials/
  (#2 is Audio / Narration)

  And Movie Makers Forums may be worth a visit:

  Movie Makers Forums

  http://www.windowsmoviemakers.NET/forums/default.aspx

   

  =================================================

  info on savings:

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  In addition, you may find it useful to use
  a custom profile:

  Movie Maker 2 - Save movies - custom WMV profile
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

• Drag and drop any of the touchpad buttons

  Hello, my company gave me a laptop Pavilion Win8.1 running, it has no buttons on the touchpad.  How you draw around an object when you use the cutting tool, or how you drag and drop a file?  Is a required external mouse?  Thank you.

  I think Microsoft is yet to come up with a fix for this point 8.1 OS.

• biometric: How can I adjust the setting on my computer so I don't have to drag my finger every three minutes?

  How can I adjust the setting on my computer so I don't have to drag my finger every three minutes?  When I walk away from my computer for more than 3 minutes... I have to re-do move my finger.

  If you mean every 3 minutes you get disconnected so your finger is to open a session back, right click on the desktop, select Personalize downstairs, and then in the new window click on screen saver or turn it off or set the number of minutes and make sure "on Resume, display logon" is NOT selected. If it happens again every 3 minutes, return to customize, select this time power options and change the time it takes for the screen to be able to something higher.

• My keyboard and the touchpad are locked, does not respond to what it is.

  My keyboard and the touchpad are locked, do not respond to what it is. I activated the screen keyboard on and it works. It is a G71-340US, Windows 7. I think it happened when the battery died while in a Word doc. computer is turned off. Plugged. Turned, password screen appears, could not type anything in the box. The mouse works. My keyboard and the touchpad are locked, do not respond. Restarted, no help. Pulled the battery, no help. At least I can use the keyboard to the screen!  Thanks for your help.

  Did a restore of the system and all is well! Went back 3 days of the last update of windows. I hope this helps others!

• What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  cwalker,

  If it does not, it may be time for the list:

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

• What is the best way to adjust the brightness in multiple files using elements 13?

  I have about 100 JPEGs that I need to cheer up.  I need to adjust the brightness in "100" on each; is there a quick way?  "Treat multiple files" does not...

  Thank you!

  john_oc wrote:

  I have about 100 JPEGs that I need to cheer up.  I need to adjust the brightness in "100" on each; is there a quick way?  "Treat multiple files" does not...

  Thank you!

  Simple and powerful: use the ACR (Camera raw).

  Depending on the power and the amount of RAM on your computer, you can now open and edit multiple files at the same time in the ACR module.
  Use the menu file/open in camera raw.

  Select a batch of files (say 20 to begin by)

  Select all the files in the camera roll on the left.

  When they are highlighted, you will notice that the ACR module shows its AutoCorrect settings. Generally the brightness of your images will already be improved.

  The changes you apply to the sliders will change all the images highlighted.

  Take advantage of the opportunity to refine all the other sliders made highlights/shadows, clarity, vibrance, sharpening or noise reduction...

  Tip:

  What you do in the ACR module do not alter the original jpeg pixels. Only the parameters are saved, which is called parametric edition. So after this editing session, when you save the changes ('Done' button), you are able to reopen the jpeg (it will open automatically in ACR, even from the Organizer). You will be able to start editing with either:

  1 - the values of the original jpeg (turn all the sliders to zero, auto or custom in the right panel).

  2 - the AutoCorrect default CAB
  3 - your latest changes (settings file)
  4 - the session settings of most recent edition (which is useful to apply to several image consecutively).

  These settings are saved in the jpeg metadata section. No need to create a version set at this stage.

  Important: even if you are happy with the automatic settings default to ACR, apply a little change of your choice so that the settings are saved in the metadata section when you click on 'Done '.

  You have now edited your first batch. If you use the orgnizer, you might want to "update thumbnails', which show the improvement of brightness in thumbnails. You are ready to make the necessary changes to individual files, such as cropping or sharpening in ACR. Instead of clicking "Done", you can click on 'Open' to open the file in the Editor (you can change in 8 or 16-bit). You must go into the editor to apply other changes as layers, local adjustments. you use the editor to register in any other format file or print.

  For the next batch, the mounting parameters are available in the dropdown to the right (previous conversion). Open files, highlight all, select previous conversion, click 'Done '. Wait for the settings to be saved in jpeg files.

  In a situation where you have 100 files JPEG, the workflow that the above is by far the fastest and most flexible you can use. Imagine you have a white balance bad setting of your camera, you can imagine the time you need by editing individual files in the editor?

• I am not able to adjust the height of a page on my site. I try to move the blue mark on the left side and it does not move. What should I do? Thank you

  I am not able to adjust the height of a page on my site. I try to move the blue mark on the left side and it does not move. What should I do? Thank you

  Hello

  could you please try to find an empty project as rectangle/text box, especially at the lower end of the page. Use Edit-> "Select All" to select all elements on the page, it will be easier to locate.

  Let me know if it works

• Why can't adjust the scale of my text by dragging the corner boxes?

  Why can't adjust the scale of my text by dragging the corner boxes? Why I have the text selected, she she let me to change the font, size, etc., OR all I can do is move throughout the artboard. Why can I click and drag the angle box to adjust?

  M

  Sorry I forgot the passage in there (Ctrl-Shift-B). Also found at view > show/hide the rectangle enclosing for us mentally.

• What can I do to check the touchpad on my laptop

  The touchpad does not work on my laptop. I believe that a software update corrupted the driver file.  Y at - it to confirm this?

  Go to: Control Panel, Device Manager, expand: mouse and other pointing devices.

  Right-click on your keyboard, click on uninstall, do not put a check in the box:

  'Delete the driver for this device"unless you have the driver software on the CD that came with your computer.

  You can also download the driver software from your computer manufacturer (recommended before deleting)

  Click OK to confirm the delete, close Device Manager, restart the computer.

  If you perform these operations and do not delete the driver software and your question remains then download the software (it might even be an update of the software) and do the following steps.

• Right button on the touchpad does not and cannot change the setting of what happens when the laptop is closed

  I own a HP Pavilion, under Windows Vista Home Premium, with 2-way ALPS Touchpad, I updated the touchpad driver and tried to change the options of the right button but nothing has helped.    Also, how can I change the settings for when I close my lap top

  Try the right key when it is started in safe mode or with a clean bootor maybe when logged in as a different user.

  Change the cover closing the settings by going to control panel-> Power Options-> choose closing the cover.