adjustment of curve with the equation

Similar Questions

• LG Wireless adapter upward adjustment to work with the WRT54G Router

  My parents recently bought a TV high definition LG and they got a wireless adapter to LG for it (YEAR-WF100). My brother was able to insall, but when trying to connect to the router, we get an error message saying DHCP must be enabled. From what I see when I go in the settings of the router, DHCP is enabled. We are pulling our hair out trying to figure out what we need on the router so that it works settings. We tried the two setting up the connection manually and automatically with the IP, gateway, etc. I don't know what other information is needed, but I'll give you more details if anyone has any ideas. We have also two apps created by Applications and games tab (Nintendo DS and Wii). I do not know if that might interfere with anything. Any help would be appreciated!

  After spending two hours on the phone with the Geek Squad (Fortunately it was free), we found the problem is that the router was set to WEP settings, and it must be WPA. Too bad the Nintendo DS only supports WEP. I guess I can just switch back to WEP when I go online on the DS. Thank you for taking the time to help!

• How to put a property group in a related curve with the Expansion curve text label

  Hello

  I'm working on a graph which trace a WaveFormChannel named 'Test '. Given that I enabled the expansion of the curve, the graph shows all channels named "Test" in the DataPortal. Now, I want to put the value of the property of the "MyGroupProperty" group in the legend, so whenever I add a new group, automatically add the new "Test" signal and show "MyGroupProperty" in the legend.

  So far, I tried to use the curve text in the option of the label, with something like this

  @GroupPropGet (GroupNumber, "MyGroupProperty") @, but I have to give the value of GroupNumber, and then it shows the same value for all signals. So if I add a new group to the dataportal with a Test string, the legend shows the label of the new signal, but the MyGroupProperty remains the same for all labels

  

  Thanks in advance for your help

  Hi dslemusp,

  You can use the global 'CGI' variable in a tiara expression to provide the current Index of the traced (even in expansion mode) group.  I've prepared an example that illustrates this and attached it below.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Make an adjustment in line with the Vision Assistant for a polynomial function?

  Hello

  I have the following problem: I have a laser beam which a (non-linear) line on a wall. For this line, I need to know (exactly) mathematical

  function. That's why I can get a picture of the line, but I don't know how I can extract the mathematical function with a line fit for example. If I could "convert."

  the line at points that I would use the line fit function to LabView that should work without problem.

  Is there a way to solve the problem with vision assistant or... ?

  Thanks in advance

  Hello

  after thresholding, this should work:

  

  False case just by...

  Best regards

  K

• Where my speaker volume icon / go go to the notifications bar, how do I get back that I can adjust my volume with the slider?

  My "speaker" icon is no longer on the bottom right of my screen.  How can I get that back so that I can click on it to adjust my volume?

  See the following items if they would help to:

  Missing in Vista notification area icons
  http://www.Winhelponline.com/blog/notification-area-icons-missing-in-Vista/

  Difficulty for clock when, Volume, power or network icons are missing and Grayed Out in Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-when-clock-volume-power-or-network-icons-are-missing-and-grayed-out-in-Windows-Vista/

• Adjustment of curve with 2 independent variables

  Hi all

  I want to be able to solve the viscosity of a liquid at a given pressure and temperature.  What I have are two tables 1 d for pressure and temperature, and then I have a 2D (20 x 200) of the values of viscosity table.  In the 2D table rows represent the temperature and the columns represent the pressure.  I must also stress in the 2D table there NaN values entered the pressure/temperature points where the liquid is a liquid.

  I know there are a lot of posts asking the same thing, but I can't seem to wrap my mind on how to start on this.  I know that this is very probably a sequel to adapt, but I have no particular model to use.  I have attached a vi which contains a sample of the data I will use and was hoping someone would be able to help start on that.

  Thank you

  Terry

  
  

• The height adjustment of product with the marquee tool. How?

  When I use the marquee tool to draw a shape - square/circle etc. I sometimes don't get the size exactly to my needs. is there a way to fine-tune the size of the product? I guess that there is a key combination that will allow me to make fine adjustments upwards or downwards for the size of the shape. Does anyone know how to do this without closing and starting again and again until I get what I ask?

  Hello.

  In the toolbar, you can set a specific size in pixels or whatever.

  Or, you can do a right click on the selection and choose transform selection.

  Lee

• Need help with the curve of a group of objects

  Salvation Group;

  This is my first post in this group. I'm quite new to Adobe Illustrator CS5, and I had to start using it to provide the type of file to a printer for Sublimation in the USA. They use CS5, and all colors are limited to the Pantone Solid Coated for their printing system. I'm swimsuit fabric printing.

  However, my question is probably very basic. It is also frustrating, because I have already successfully did this that I ask, just do not remember how I did it.

  

  In my image, the upper rectangle has curved shape finished (bottom). I've done this before, with in fact several objects together. They all have the curve with the rectangle.

  I tried to do it again, using all kinds of transformation tools (shear), the tools of the effect and everything I could find, but nothing has worked. I thought that maybe to shear would work if I could fix in the middle of the rectangle and shear on both sides of the rectangle to the top, but it does not work. I think I'll start to take notes when I find something that works!

  How this simple curves of single object or group of objects? It can be done, I know!

  Thank you, Tom.

  You can also use the Suspender Warp or distort the Emvelope > make with Warp Arc

  How to apply it

  as individual objects and the other as a group

  As objectrs

  

  As a group

  

• Select curve chart WPF and nickname of curve in the ToolTip

  Hello

  How can I do, view the name of curve in the ToolTip, if I moved the mouse over the curve?
  Or view the name of curve staring above the curve?
  And, how can I select a curve with the click of a mouse?
  Possible?

  Kind regards
  Tamas

  P.S.: Community VS2013 & MS2015 Standard

  Using the logic of tool tip of the point value of graphic display WPF overviewand the GetPlotAt function, here's an example that uses mouse clicks to select tracks in a chart:

  partial class MainWindow: Window {}
  
  _selectedPlot of private land;
  public MainWindow () {}
  
          InitializeComponent ();
  Tour (option) on the hit test for lines, in addition to the actual data.
  
          Graph HitTestMode in the Group PlotHitTestMode.RenderedInterpolation;
  Updated tooltips to display quickly and for a long time.
  
          ToolTipService.SetInitialShowDelay (graph, 0);
  
          ToolTipService.SetShowDuration (graph, int. MaxValue);
  Fill in the chart with the data and the locations of the example.
  
          Graph BeginInit ().
  
          var plotBrushes = new [] {Brushes.Red, Brushes.Orange, Brushes.Green, Brushes.Blue ;}
  
          < plotbrushes.length;="" ++i="" )="">
  
              label As String = "Plot" + (i + 1);
  
              rendering engine of var = new LinePlotRenderer {Stroke = plotBrushes [i]};
  
              var field = new plot (label) {Renderer = renderer};
  
              Graph Plots.Add (field);
  Graph data [i] = new [] {i, i + 1};
  
          }
  
          Graph EndInit ().
  Monitor the plot area of the chart for mouse clicks.
  
          Graph. PlotAreaMouseLeftButtonDown += OnPlotAreaMouseLeftButtonDown;
  
      }
  private void OnPlotAreaMouseLeftButtonDown (object sender, MouseButtonEventArgs e) {}
  
          Check if a new route has been shown at the current position.
  
          Point ScreenPosition = e.GetPosition (graph);
  
          field var graphics = (Plot). GetPlotAt (screenPosition);
  
          If (plot == null | plot == _selectedPlot)
  
              return;
  Deselect the previous plot, if it exists.
  
          If (_selectedPlot! = null) {}
  
              ((LinePlotRenderer) _selectedPlot.Renderer). StrokeThickness = 1.0;
  
              (Graph (ToolTip). Tool - tip). IsOpen = false;
  
          }
  Select the new path and display a ToolTip.
  
          _selectedPlot = conspiracy;
  
          ((LinePlotRenderer) plot. Rendering engine). StrokeThickness = 2.0;
  
          Graph ToolTip = new ToolTip {Content = string. Format ('"{0}' selected', plot. Label), IsOpen = true};
  
      }
  
  }
  
  

  "Display the name of curve staring above the curve", with respect to the simplest approach would be to use a PointAnnotation to display a label to a particular position (probably hiding the target and arrow).

• Multidimensional operator in the left side of the equation

  I'm in the old debug code and optimization of an application.

  Found calculations have a multidimensional operator in the left side of the equation and these are usually out of the SOLUTION.

  I simplified the code just to make the point.

  Fix ("Commision_Account")

  IF ((& par an1-> "Version01"-> "Activation_Account"-> "USD" == 1))

  Jan)

  "Version03"-> "USD_Reports" = "Version01"-> "USD_Reports";

  "Version04"-> "USD_Reports" = "Version01"-> "USD_Reports";

  . (Follow-up to similar combinations)
  

  .

  .

  )

  ENDIF

  ENDFIX

  Remind me, what should be the technical explanation why is not the effective database?

  I think to change the 'version' repair several.

  What would you do?

  Thank you!

  Hello Urbano,

  you could do the

  DATACOPY "Version01' to 'Version03 ';
  DATACOPY "Version01' to 'Version04 ';

  and by adding the 'USD_Reports' in the HOTFIX.

  It is however essential that the DATACOPY is not allowed in the IF statement. You want to only do this, when the condition of the IF statement is true.

  So the only way is to work with the equation. The blocks must exist, otherwise you must add the VALUE CREATEBLOCKONEQ.

  USD reports can be added to the CORRECTION of anyway - given the example.

  Kind regards

  Philip Hulsebosch

• Draw a curve on a graph with an equation xy

  I need to plot several curves on a xy chart.

  I know how to plot multiple curves, I do not know how with an equation.

  example y = 2.039 + 1.116 * exp(.01468*x)

  I did this with a point to manually, but will be a lot of these with positive and negative also.

  For plotting with an equation would save a lot of time.

  

  Hey,.

  I don't know if I get your problem correctly, but you can do all kinds of math with both tables (even several a table with a unique number for example) or another table and you can group their be plotted on a xy chart.

  For example in this excerpt (you can copy this image on the block diagram and use the code she) I use the loop for to give a table for the x axis (you can use your existing x axis in a table data) and then I do more mathematics on that: firstly I do your formula to calculate data, then I do a truncated version of your formula to get another set of data there and finally I use a mathscript node to get the same data as the first (but with a slow performance, especially if you use a lot of as primitive formulas give good performance than mathscript). Can I group them into clusters and build an array of them to draw all the

  

  Then the result is the following with plot 0 masking 2 both have the same data.

  

  I hope that you are looking for help like this.

• Problems with the curve

  I have a square or polygon. I want to turn one side of right of a smooth curve. Is there a way to do this?

  I have the pen tool and I am followed by an object. I want to create a side curved, then continue on straight edges. However, the tool insists on the creation of curves of 2 or 3 at a time.

  Is there a way to create a single isolated or part of a curve shape that is adjustable with the two endpoints. It seems that the curves that I often creates lack levers to one of their ends, making it more difficult to get the shape I want.

  I have a square or polygon. I want to turn one side of right of a smooth curve. Is there a way to do this?

  ALWAYS indicate what version of the program that you are using. Assuming that CS3 or later:

  (View > snap to Point on)

  1 white pointer (the so-called Direct Selection tool): select the anchor of interest points.

  2 Control Panel (this strip along the top of the window): click on the smooth button convert. The anchor is changed into sweetness; the two Direction handles auto-étendre.

  3 white pointer: drag the handle unwanted in the anchor.

  or...

  3 convert Tool: click the handle unwanted.

  I have the pen tool and I am followed by an object. I want to create a side curved, then continue on straight edges. However, the tool insists on the creation of curves of 2 or 3 at a time.

  1 pen: click. (Put a corner Point).

  2. move the slider. ClickDrag. (Place a smooth Point, curved segment results.)

  3. click on the anchor you just placed. (Cut off the outgoing handle.)

  4. move the cursor. Click on (places a corner Point, the line segment results.)

  Is there a way to create a single isolated or part of a curve shape that is adjustable with the two endpoints. It seems that the curves that I often creates lack levers to one of their ends, making it more difficult to get the shape I want.

  1 pen: Click (puts a corner Anchor Point.)

  2. move the slider. MouseDown and drag. (Puts an anchor of smooth, curved segment results.)

  3 press and hold ALT continues to slip. (Coming out of the handle under the cursor moves independently the incomming handle.)

  4 Mouseup. Move the slider. Click or ClickDrag to set the next anchor point.

  There are other ways to make a little of what precedes, by pressing the shortcut keys to move to other tools. For example, when drawing in pen, you can press Alt to call the tool convert a temporary anchor point and drag a handful of pre-existing SmoothPoint and its opposite handle move independently (anchor of the so smoother conversion in a corner Anchor Point).

  One of the weaknesses of the Illustrator in this (apart from boredom in all of comparison) is its inability to drag a handle retracted on a corner point retracted to bend an existing right segment.

  There are 3 different types of anchors - straight, smooth (two direction handles work in alignment) and cusp (two handles of direction working independently).

  N °

  Illustrator interface defines two types of anchor Points: corner or smooth. What you call a "cusp point" is just a CornerPoint with one or two of its scope handles. 'Dawn' (kind of a Bézier control point) is a relevant term of Corel Draw, Illustrator not.

  Illustrator: Smooth corner Point, Point

  Draw: Cusp node, smooth node, node symmetric (Illustrator does not provide symmetrical behaviour.)

  Scribble: corner Point, curve Point, Point of connector (Illustrator does not provide the behavior of connector).

  JET

• Start an adjustment with the whites and blacks?

  Martin Evening in CS6 for photographers recommend to adjust an image with exposure, contrast, and then fine tune with the shadows and highlights. Explains the use of whites and blacks only if necessary. Julieanne Kost has a pithy video on cab in which she begins by setting the white and black (which dates back to the advice of Bruce Fraser / Real World Photoshop using levels in Photoshop). http://TV.Adobe.com/watch/Photoshop-CS6-featuretour/Adobe-camera-raw-70-in-Photoshop-CS6/

  I know that I can see what works best for an image, etc.. Ask yourself what is the recommended procedure.

  I could write reams about it. Have already done.

  I will however keep this short (for me) and let someone else take a better stab.

  It is wrong to think of controls PV2012 as being something like those of other publishers.

  The bottom line: give the picture adaptations she needs, whatever you start with.

  So perhaps a better question is: How do we know what adjustments needs a photo in PV2012?

  (I warned people against trying to arrive at a single procedure that will work for all photos)

  That's all for now.

  OK, maybe a quicky:

  No matter what start you with, try to keep clear 0 or negative, shadows 0 or positive and shadows value exactly equal to the value of highlights. Once you have the photo in the ballpark in this way, no matter how you juggled exhibition & white..., then and only then, consider asymmetric values of lights and shadows.

  WARNING: this "formula" works on 90% of the photos, not 100 percent. Or it could be 0% (or 100%) depending on what you're shooting...

  Okay, I can't resist:

  Most of the pictures can be edited in this way:

  * Most critical exposure setting

  * Use - highlights for container of the upper extremity

  * Use + shadows to normalize the lower end

  * The difference in taste.

  * - black & + white to make full use of the available tonal range.

  But at the other extreme, there are these:

  * Exhibition but still critical,

  * puts in light and shadows of the sliders do not hit the sweet spots: leave at zero.

  * Use - white & + blacks for recovery & fill, respectively.

  * You may very well push contrast, although it is an image too contrasted initially. Or not...

  And then there's a whole series of photos which sit somewhere between the two...

  Confusing? Yes. PV2012 is great, but delicate and requires a completely different way of thinking and a flexible 'procedure'...

  Note: Highlights slider going positive, and cursor shadows going negative also, independently of the highlights slider for a reason. But their use in this way should be reserved for unusual cases of raw or refine already cooked jpegs, or you really know what you are doing and why you...

  One last point is critical: exhibition in PV2012 sets mainly mid-level tones, that is why it is the most critical: highlights, contrast, shadows, all hinges on a suitable exposure setting.

  Black & White adjustment are probably the biggest keys for optimal fit in PV2012, but they are more difficult to nail down, because their adaptation depends strongly on the photo, but maybe a golden rule to be broken:

  * - black & white if possible, for punchy complete histogram photos +...

  * + Black & - White tones tend to gang to the extreme endpoints of the gases, such as highlights & shadows adjustment do not understand... (or you prefer the softer look that can come, or else...).

  WARNING: This is a personal thing, and probably different people different things that work best for them...

  PS - Don't forget the curve of tone & inhabitants after basic setting (can be done over too, but it is not recommended until you have acquired sufficient experience).

  Lr4/PV2012,

  Rob

• Down upwards arrow keys do not work with the curves?

  I have the latest version of Lightroom. 3.4.1 I wish I could adjusted curves using my up and arrow keys rather than manually with the mouse.

  I tried everything nothing helped. I can't point the curve move my arrows. The arrow keys work with other aspects of Lightroom this as if I hover over vibrance and use the arrow keys to make adjustments, they work perfectly.

  I do something wrong here.

  Can someone help me please?

  I'm on Windows 7 Pro.

  Thank you.

  This feature is not available with the curves that, like you, I'd love the ability. FYI, you can refine the points with the mouse by holding down the option/ALT key.

• Display the areas in curves, otherwise than with the mouse

  I want to put the light and shadow sliders in the curves but am finding the mouse a pain to use, because it is not sensitive enough. When you try to put the shadow slider to slightly less darker region (no cutting), I usually do:

  1 option + click on the black slider and drag it to the right until the shadow detail.

  2. back off the coast until it disappears.

  Try to do it with a mouse is tedious, not helped by the hysteresis into the system. Say the first shadow detail appears at level 15. When you reverse and move to 14, the shadow detail increases. It's another pain.

  I want in any case, a method that uses the arrow keys to show me the shadow and highlight areas.

  Am I lucky?

  If your just using a curves adjustment, no not a curves adjustment layer, then

  You can check the show Clipping, click on set highlight or shadows

  cursor, highlight the numbers in the box, then use the arrow keys.

  With the new adjustment layer panel style, which does not seem possible.

  What you could do is made a new curves adjustment layer action

  and make sure that the show dialog box is enabled.

  That you will get the old style curves adjustment dialogue layers that works like the

  above regular as curves dialog box.

  

  

  

  MTSTUNER