LG Wireless adapter upward adjustment to work with the WRT54G Router
My parents recently bought a TV high definition LG and they got a wireless adapter to LG for it (YEAR-WF100). My brother was able to insall, but when trying to connect to the router, we get an error message saying DHCP must be enabled. From what I see when I go in the settings of the router, DHCP is enabled. We are pulling our hair out trying to figure out what we need on the router so that it works settings. We tried the two setting up the connection manually and automatically with the IP, gateway, etc. I don't know what other information is needed, but I'll give you more details if anyone has any ideas. We have also two apps created by Applications and games tab (Nintendo DS and Wii). I do not know if that might interfere with anything. Any help would be appreciated!
After spending two hours on the phone with the Geek Squad (Fortunately it was free), we found the problem is that the router was set to WEP settings, and it must be WPA. Too bad the Nintendo DS only supports WEP. I guess I can just switch back to WEP when I go online on the DS. Thank you for taking the time to help!
Tags: Linksys Routers
Similar Questions
-
The Lenovo 65W Slim adapter (in Yoga) will work with the carbon X 1?
Hello
Does anyone know if the Lenovo 65W Slim adapter for Yoga will work with the carbon X 1?
I would like to have a lighter power brick to travel with. I'm willing to accept slower load time.
There is also a version of 45W:
Thank you!
-
Network adapter driver does not work with the recovery discs provided by hp
Hello
My wireless light does not illuminate. The network adapter driver does not install from the recovery of the driver CD.
Here is the hardware ID. Please provide a link to the drivers:
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
PCI\VEN_10EC & DEV_8176 & CC_028000
PCI\VEN_10EC & DEV_8176 & CC_0280
Thank you
You are the very welcome.
It does not sound like a heat problem.
I don't know a lot about the repair of hardware issues beyond replacement memory and hard drives.
I could try to clean the area of fan/radiator with a can of compressed air and see if that clears any dust that may accumulate.
To do this, disconnect the laptop from the AC adapter and remove the battery.
Insert a rod through the air fan to keep the blades turning when you spray air.
Spray through the air intake fan and watch to see the dust out of the exhaust.
Repeat once or twice and blow air from the other direction of the drain line to the fan.
The other driver, you need is the driver of protection Protectsmart hard.
See if it works.
-
Wireless camera does not work with the new router
Hello, I'm having a problem with a camera D-Link DCS932L after you set up the EA4500. The manual of the camera can be found here.
http://d2okd4tdjucp2n.CloudFront.NET/DCs-932L_A1_Manual_v1.00 (NA) - en.PDF
It worked fine with my old D-Link router. The rest of the House has not had a problem with the EA4500. There is a level of criticality around this camera certail and if I can't make it work, I'll have to return the router. Configure the redirection of port as 5556 ~ 5559, TCP protocol (but I tried "Both" as well"with the IP address of the camera. It still does not work.
I craft but not in networks, i.e. I'm not stupid with tech but port quarrels is out of my comfort zone. This camera with our old router setup took minutes. I spent five hours trying to make it work on the EA4500.
I guess you have the static IP value, or having a reserve of DHCP MAC address for the camera, network OK settings.
What was the authentication wireless on the old router and that you use the new 4200?
Is it possible that the camera does not support the encryption used by the 4200, i.e. wpa2-personal?
Have you tried WEP to see if the unit works then?
-
Satellite L40-143 - WLAN does not work with the new router
WLAN on my Satellite L40-143 does not work since I Modem Alice-1121.
Who can help me, please!
Hi kenny_21,
If you have a new WLAN router you must change the configuration that I think
The new router is visible under WLAN connections and can connect?
If so try to connect. The standard router password can be found in the manual of it and no doubt, there will be new addresses MAC first before connect you. I put t know the exact configuration.
Also check the options the WIRELESS card with TCP/IP. Usually, you need automatic IP addresses.
-
With the wrt54g router wireless security - separates the WLAN LAN clients
I have a wrt54g router and want to separate clients WLAN access to computers and servers on the local network... in other words, I want to make a 'guest' network I put the router in 'router' instead of 'bridge' mode I want just to be sure if it's the best thing I can do in terms of transforming the network wireless in an isolated.
Check out the 3rd party firmware like dd - wrt.
-
Network printer will not work with the new router
Just changed routers and now cannot print on Officejet Pro 8000 A809, which is connected to the router ethernet. On Windows 7, download a message indicating that the printer 'cannot be contacted over the network. Tried unplugging printer ethernet cords and power and reconnect the Self Test and Configuration network pages printed OK, but still cannot print.
Before I saw this solution, I decided to try to uninstall and reinstall the printer. It worked.
-
Control of the Xbox 360 Wireless for Windows does not work with COD WAW
Hello, I use the X box for windows pc controller. I have Windows Vista 64 bit installed, and I am trying to play Call of Duty World at War; However in the gameplay, the game does not respond to any controller input. Where this happens, it is indeed the controller wireless for windows with the wireless adapter and yes I checked for the last update and I.
O.S Windows Vista, 8 GB of Ram, Intel Cor 2 extreme quad, HP laptopHello dtorres17.
Unfortunately, Call of Duty World at War doesn't support any input other than a mouse and a keyboard controller. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)
-
HP laserjet p1102w: wireless printer does not work with the new wireless network
My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you
Hi Shlomi,
Thanks a lot for the info. I'll give it a try today... -
The ICF-CS15iP will work with the iphone 5 with 30-pin adapter light
the ICF-CS15iP will work with the iphone 5 with 30 pins to lighting
Hello, Howard.
Welcome to the community of Sony.
Sony has not yet tested iPhone5 with our units as it has only been recently published. If you are able to connect the iPhone on the dock using the lightning adapter, you will need to check the compatibility of the iOS6 with the dock. I suggest you consult with Apple if the home Sony station were found to be compatible with the iPhone5.
If my post answered your question, please mark it as an "accepted Solution".
-
After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help
You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).
-
Is Re: Satellite A500-17 X - it allowed to do work with the charger plugged?
Is it OK to play games / work with the charger plugged into my laptop all the time or by doing this will cause the battery becoming weaker?
I remember having a laptop earlier and 3 hours battery lasted only 30 minutes.
This will happen to my Toshiba A500 computer laptop X 17 too if I had to plug my charger all the time?Should I get out the battery if you don't use?
> Is it OK to play games / work with the charger plugged into my laptop all the time or by doing this will cause the battery becoming weaker?
Yes you can do it and you should not be afraid that this will affect the battery!
After that the battery has been recharged, the grief process stops and the battery is not looping
My cell phone is always on the AC adapter at home and the battery is still OK and it work properly! -
Wireless adapter is no longer present in the Device Manager
Hello
I have an Asus laptop 1015E (http://www.asus.com/us/Notebooks_Ultrabooks/1015E/#overview) running Windows 8. I don't know when it happened, but the built-in wireless adapter is no longer present in the Device Manager. I tried to use the Asus install app to reinstall the driver Asus Wireless Radio control, but it just says: it is already installed. I also went to the site of asus via an ethernet connection and tried to download the latest drivers for wireless card, but installation cannot. It seems as if the laptop detects most hardware, so I can't install driver software. Any ideas on how to proceed?Thank youHi wolves.
Do you receive an error message/code?
When a device does not work, it's mostly because the driver has been corrupted.
Here are some ways you can follow to resolve the problem:
Method 1:
Check out the link and follow the steps in the article:
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-in/Windows-8/fix-network-adapter-problems#
Method 2:
You will need to install the Chipset Drivers first and later network adapter drivers.
Reference:
http://www.ASUS.com/us/supportonly/Drivers_For_Win8/#support_Download_36
Method 3:
Check the BIOS of the laptop to check that there isn't an option to toggle the map.
Note: You can contact the manufacturer of the computer, if you are not comfortable access or make changes in the BIOS.
Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
In addition, contact the OEM of your system and see if they can replace the adapter or run a test to make sure that the adapter is working properly.
I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
-
Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm. 2015.0.1 20150722.r.168
What are your settings of GPU acceleration? As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity. You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.
Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right. It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.
Does this fit with what you see, or you are not able to change things at all? If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity. That's what I see after direction the lens above with a big brush continuously for 10 seconds. Note This is on a fairly quick NLE System.
-
Procedure failed when using bulk collect clause and works with the cursor
Hi all
I use "BULK collect into" clause in my procedure and it is a failure after 21 minutes and gives the error "end of file communication channel.
After that this error comes when I tried to connect the database it gives following error.
ORA-01034 - Oracle is not available.
ORA - 27101-shared memory realm does not exist.
SVR4 error: 2: no such file or directory.
When I use the cursor instead of the COLLECTION in BULK IN the clause, it runs successfully.
Following the code works with the slider.
procedure work_kiosk_full (an_jobid in number, ac_sqlcode out varchar2, ac_sqlerrm out varchar2) is
ld_curr_time Date;
cursor cur_work_kiosk is
Select distinct jt.jt_id AS jt_id,
NVL ((ROUND ((jt_date_completed-jt_date_requested) * 24, 2)))
),
0
) AS actual_hrs_to_complete,
NVL ((ROUND ((jt_date_responded-jt_date_requested) * 24, 2)))
),
0
) AS actual_hrs_to_respond,
peo1.peo_name AS agent_name,
peo1.peo_user_name AS asagent_soe_id,
Le.lglent_desc AS ap_system,
"" AS assign_work_request_comment,
DECODE (jt.jt_bill_id,
138802, 'BILLABLE CLIENT. "
138803, "CONTRACTED"
"138804, ' BILLABLE IN-HOUSE."
NULL, ' '
) Billable.
BL.bldg_name_cc BUILDING, bl.bldg_id_ls AS building_id,
DECODE (bl.bldg_active_cc,
'Y', 'ACTIVE',
'INACTIVE '.
) AS building_status,
DECODE (jt.jt_wrk_cause_id,
141521, "STANDARD WEAR."
141522, "NEGLIGENCE."
141523, "ACCIDENTAL."
141524, "MECHANICAL FAILURE."
141525, "CONTROL."
141526, "VANDAL."
141527, 'STANDARD ',.
141528, "WORK PROJECT",.
6058229, "TEST."
NULL, ' '
) AS cause_type,
' ' AS comments, peo3.peo_name AS completed_by,
JT.jt_requestor_email AS contact_email,
JT.jt_requestor_name_first
|| ' '
|| JT.jt_requestor_name_last AS contact_name,
JT.jt_requestor_phone AS contact_phone,
CC.cstctrcd_apcode AS corp_code,
CC.cstctrcd_code AS cost_center,
JT.jt_date_closed AS date_closed,
JT.jt_date_completed AS date_completed,
JT.jt_date_requested AS date_requested,
JT.jt_date_responded AS date_responded,
JT.jt_date_response_ecd AS date_response_ecd,
JT.jt_date_scheduled AS date_scheduled,
DECODE (jt.jt_def_id,
139949, "WTG VENDOR RESPONSE."
139950, "WAITING ON PARTS."
139951, "AVAILABILITY OF THE HAND ŒUVRE."
139952, "WORK DEFERRED-HI PRI."
139953, "APPROVAL OF WIND TURBINES."
139954, "FUNDING."
139955, "ACCESS DENIED."
139956, "WTG MATERIAL."
NULL, ' '
) AS deferral_reason,
JT.jt_description as description,
JT.jt_date_resched_ecd IN the development of the young child,
FMG.facility_manager AS facility_manager,
FL.floors_text AS FLOOR, gl.genled_desc AS general_ledger,
'' AS kiosk_date_requested,' ' AS kiosk_dispatch_confirmed.
"" AS kiosk_dispatched,
EQP.equip_customer_code AS linked_equipment_alias,
EQP.equip_id AS linked_equipment_id,
EQP.equip_text AS linked_equipment_name,
DECODE (jt_originator_type_id,
1000, "PROJECT MOVE REQUEST."
138834, "CUSTOMER OPEN CORRECTION."
138835, "OPEN REQUEST CUSTOMER."
138836, "CORRECTIVE MAINTENANCE",.
138837, "BOOKING CONFERENCE ROOM."
138838, "PROJECT INITIATED REQUEST."
138839, "PLANNED PREVENTATIVE MAINTENANCE."
138840, "COULD START FREE APPLICATION."
NULL, ' '
) AS originator_type,
"" AS payment_terms, priority_text AS priority_code,
swoty.sworktype_text AS problem_type,
Prop.property_name_cc as a property,
JT.jt_cost_quote_total AS quote_total,
par.levels_name IN the region,
DECODE (jt.jt_repdef_id,
141534, 'ADJUSTED SETTING. "
141535, "THE TRAINING OF THE END,"
141536, "NEW REQUEST"
141537, "NO INVESTIGATION OF REPAIR."
141538 "REPLACED PARTS."
141539, 'REPLACE EQUIPMEN.
1000699, "NEW REQUEST"
NULL, ' '
) AS repair_definitions,
JT.jt_repairdesc AS MARKED_COR,
JT.jt_requestor AS applicant, ' ' AS requestor_cost_center.
JT.jt_requestor_email AS requestor_email,
JT.jt_requestor_name_first AS requestor_name,
JT.jt_requestor_phone AS requestor_phone,
"" LIKE response_time, rm.room_name_cc ROOM,
P1.peo_provider_code1 AS service_provider,
P1.peo_address_1 AS service_provider_address,
peocity.city_text service_provider_city,
P1.peo_provider_code1 AS service_provider_code,
peocity.city_country_name AS service_provider_country,
peocur.currency_text AS service_provider_currency,
P1.peo_name AS service_provider_description,
P1.peo_dispatch_method AS serv_prov_dispatc_hmethod,
P1.peo_rate_double AS serv_prov_double_time_rate,
P1.peo_email AS service_provider_email,
P1.peo_emergency_phone AS serv_prov_emergency_phone,
P1.peo_fax AS service_provider_fax_number,
P1.peo_home_phone AS service_provider_home_phone,
P1.peo_rate_hourly AS service_provider_hourly_rate,
P1.peo_title AS service_provider_job_title,
P1.peo_method_id AS service_provider_method,
P1.peo_cell_phone AS service_provider_mobile_phone,
P1.peo_pager AS service_provider_pager,
P1.peo_rate_differential AS service_provider_rates,
P1.peo_rate_differential AS ser_prov_shift_differential,
peocity.city_state_prov_text AS serv_prov_state_province,
DECODE (p1.peo_active,
'Y', 'ACTIVE',
'INACTIVE '.
) AS service_provider_status,
P1.peo_url AS serv_prov_web_site_address,
P1.peo_phone AS service_provider_work_phone,
P1.peo_postal_code AS serv_prov_zip_postal_code, ' ' shift, as.
' ' AS skill,.
DECODE (jt.jt_bigstatus_id,
138813, «NEWS»,
138814 "PENDING."
138815, 'OPEN ',.
138816, "END."
138817, 'CLOSED ',.
138818, "CANCELLED."
NULL, ' '
) The STATUS,
Lev.levels_name IN the subregion, ' ' IN the trade.
P1.peo_ls_interface_code1 AS vendor_id,
P1.peo_fax AS vendor_purchasing_fax,
P1.peo_vendor_site_code AS vendor_sitecode,
JT.jt_id AS vendor_ticket, p1.peo_name AS vendor_companyname,
JT.jt_requestor_vip AS vip, wo.wo_id AS work_order_no,
JT.jt_id AS work_request,
JT.jt_class_id AS work_request_class,
woty.worktype_text AS work_type, ' ' AS wr_cost.
JT.jt_description AS wr_description,
"" AS wr_dispatch_method,
DECODE (jt.jt_bigstatus_id,
138813, «NEWS»,
138814 "PENDING."
138815, 'OPEN ',.
138816, "END."
138817, 'CLOSED ',.
138818, "CANCELLED."
NULL, ' '
) AS wr_status,
ctrY.country_name as a country
OF citi.jobticket jt,.
Citi.Property prop,
Citi.Bldg bl,
Citi.bldg_levels bldglvl,
civil LEVEL lev,
civil by LEVELS.
(SELECT crstools.stragg (peo_name) facility_manager,
bldgcon_bldg_id
OF citi.bldg_contacts, citi.people
WHERE bldgcon_peo_id = peo_id
AND IN bldgcon_contype_id (40181, 10142)
FMG GROUP BY bldgcon_bldg_id),
Citi.floors, fl,
Citi.Room rm,
Citi.general_ledger gl,
the Citi.legal_entity
Citi.cost_center_codes cc,
Citi.Equipment eqp,
Citi.workType woty,
Citi.subworktype swoty,
Citi.work_order wo,
Jtwo Citi.jt_workers,
Citi.Priority,
Ctry Citi.Country,
Citi.People p1,
Citi.People peo3,
Citi.People peo1,
Citi.City peocity,
Citi.Currency peocur
WHERE jt.jt_bldg_id = bl.bldg_id
AND bl.bldg_id = bldglvl.bldg_levels_bldg_id
AND bldglvl.bldg_levels_levels_id = lev.levels_id
AND lev.levels_parent = par.levels_id (+)
AND prop.property_id = bl.bldg_property_id
AND bl.bldg_active_ls <>' n
AND jt.jt_floors_id = fl.floors_id (+)
AND jt.jt_room_id = rm.room_id (+)
AND jt.jt_bldg_id = fmg.bldgcon_bldg_id (+)
AND jt.jt_genled_id = gl.genled_id (+)
AND gl.genled_lglent_id = le.lglent_id (+)
AND jt.jt_cstctrcd_id = cc.cstctrcd_id (+)
AND jt.jt_equip_id = eqp.equip_id (+)
AND jt.jt_id = jtwo.jtw_jt_id (+)
AND jt.jt_worktype_id = woty.worktype_id (+)
AND jt.jt_sworktype_id = swoty.sworktype_id (+)
AND jt.jt_wo_id = wo.wo_id
AND jt.jt_priority_id = priority_id (+)
- AND jt.jt_date_requested > = ADD_MONTHS (SYSDATE,-12)
AND jt.jt_last_update > = ADD_MONTHS (ld_curr_time-12)
AND bl.bldg_country_id = ctry.country_id
AND jtwo.jtw_peo_id = p1.peo_id (+)
AND p1.peo_city_id = peocity.city_id (+)
AND jt.jt_completed_by_peo_id = peo3.peo_id (+)
AND p1.peo_rate_currency_id = peocur.currency_id (+)
AND jt.jt_agent_peo_id = peo1.peo_id (+);
BEGIN
run immediately 'truncate table crstools.drt_bom_work_kiosk;
Select sysdate in double ld_curr_time;
FOR cur_rec in cur_work_kiosk LOOP
IF MOD (cur_work_kiosk % rowcount, 10000) = 0 then
COMMIT;
END IF;
INSERT INTO crstools.drt_bom_work_kiosk
(JT_ID
ACTUAL_HRS_TO_COMPLETE
ACTUAL_HRS_TO_RESPOND
AGENT_NAME
ASAGENT_SOE_ID
AP_SYSTEM
ASSIGN_WORK_REQUEST_COMMENT
BILLABLE
BUILDING
BUILDING_ID
BUILDING_STATUS
CAUSE_TYPE
COMMENTS
COMPLETED_BY
CONTACT_EMAIL
CONTACT_NAME
CONTACT_PHONE
CORP_CODE
COST_CENTER
DATE_CLOSED
DATE_COMPLETED
DATE_REQUESTED
DATE_RESPONDED
DATE_RESPONSE_ECD
DATE_SCHEDULED
DEFERRAL_REASON
DESCRIPTION
DPE
FACILITY_MANAGER
FLOOR
GENERAL_LEDGER
KIOSK_DATE_REQUESTED
KIOSK_DISPATCH_CONFIRMED
KIOSK_DISPATCHED
LINKED_EQUIPMENT_ALIAS
LINKED_EQUIPMENT_ID
LINKED_EQUIPMENT_NAME
ORIGINATOR_TYPE
PAYMENT_TERMS
PRIORITY_CODE
PROBLEM_TYPE
PROPERTY
QUOTE_TOTAL
REGION
REPAIR_DEFINITIONS
MARKED_COR
APPLICANT
REQUESTOR_COST_CENTER
REQUESTOR_EMAIL
REQUESTOR_NAME
REQUESTOR_PHONE
RESPONSE_TIME
ROOM
SERVICE_PROVIDER
SERVICE_PROVIDER_ADDRESS
SERVICE_PROVIDER_CITY
SERVICE_PROVIDER_CODE
SERVICE_PROVIDER_COUNTRY
SERVICE_PROVIDER_CURRENCY
SERVICE_PROVIDER_DESCRIPTION
SERV_PROV_DISPATC_HMETHOD
SERV_PROV_DOUBLE_TIME_RATE
SERVICE_PROVIDER_EMAIL
SERV_PROV_EMERGENCY_PHONE
SERVICE_PROVIDER_FAX_NUMBER
SERVICE_PROVIDER_HOME_PHONE
SERVICE_PROVIDER_HOURLY_RATE
SERVICE_PROVIDER_JOB_TITLE
SERVICE_PROVIDER_METHOD
SERVICE_PROVIDER_MOBILE_PHONE
SERVICE_PROVIDER_PAGER
SERVICE_PROVIDER_RATES
SER_PROV_SHIFT_DIFFERENTIAL
SERV_PROV_STATE_PROVINCE
SERVICE_PROVIDER_STATUS
SERV_PROV_WEB_SITE_ADDRESS
SERVICE_PROVIDER_WORK_PHONE
SERV_PROV_ZIP_POSTAL_CODE
MAJ
SKILLS
STATUS
SUBREGION
TRADE
VENDOR_ID
VENDOR_PURCHASING_FAX
VENDOR_SITECODE
VENDOR_TICKET
VENDOR_COMPANYNAME
VIP
WORK_ORDER_NO
WORK_REQUEST
WORK_REQUEST_CLASS
WORK_TYPE
WR_COST
WR_DESCRIPTION
WR_DISPATCH_METHOD
WR_STATUS
COUNTRY
CREATE_DATE
)
VALUES
(cur_rec.jt_id
cur_rec, ACTUAL_HRS_TO_COMPLETE
cur_rec, ACTUAL_HRS_TO_RESPOND
cur_rec, AGENT_NAME
cur_rec, ASAGENT_SOE_ID
cur_rec, AP_SYSTEM
cur_rec, ASSIGN_WORK_REQUEST_COMMENT
BILLABLE cur_rec.
cur_rec, BUILDING
cur_rec, BUILDING_ID
cur_rec, BUILDING_STATUS
cur_rec, CAUSE_TYPE
cur_rec.COMMENTS
cur_rec.COMPLETED_BY
cur_rec, CONTACT_EMAIL
cur_rec, CONTACT_NAME
cur_rec, CONTACT_PHONE
cur_rec, CORP_CODE
cur_rec, COST_CENTER
cur_rec, DATE_CLOSED
cur_rec, DATE_COMPLETED
cur_rec, DATE_REQUESTED
cur_rec, DATE_RESPONDED
cur_rec, DATE_RESPONSE_ECD
cur_rec, DATE_SCHEDULED
cur_rec, DEFERRAL_REASON
cur_rec, DESCRIPTION
cur_rec, DEVELOPMENT OF THE YOUNG CHILD
cur_rec, FACILITY_MANAGER
cur_rec, FLOOR
cur_rec, GENERAL_LEDGER
cur_rec, KIOSK_DATE_REQUESTED
cur_rec, KIOSK_DISPATCH_CONFIRMED
cur_rec, KIOSK_DISPATCHED
cur_rec, LINKED_EQUIPMENT_ALIAS
cur_rec, LINKED_EQUIPMENT_ID
cur_rec, LINKED_EQUIPMENT_NAME
cur_rec, ORIGINATOR_TYPE
cur_rec, PAYMENT_TERMS
cur_rec, PRIORITY_CODE
cur_rec, PROBLEM_TYPE
cur_rec, PROPERTY
cur_rec, QUOTE_TOTAL
cur_rec, REGION
cur_rec, REPAIR_DEFINITIONS
cur_rec, MARKED_COR
cur_rec, APPLICANT
cur_rec, REQUESTOR_COST_CENTER
cur_rec, REQUESTOR_EMAIL
cur_rec, REQUESTOR_NAME
cur_rec, REQUESTOR_PHONE
cur_rec, RESPONSE_TIME
cur_rec, ROOM
cur_rec, SERVICE_PROVIDER
cur_rec, SERVICE_PROVIDER_ADDRESS
cur_rec, SERVICE_PROVIDER_CITY
cur_rec, SERVICE_PROVIDER_CODE
cur_rec, SERVICE_PROVIDER_COUNTRY
cur_rec, SERVICE_PROVIDER_CURRENCY
cur_rec, SERVICE_PROVIDER_DESCRIPTION
cur_rec, SERV_PROV_DISPATC_HMETHOD
cur_rec, SERV_PROV_DOUBLE_TIME_RATE
cur_rec, SERVICE_PROVIDER_EMAIL
cur_rec, SERV_PROV_EMERGENCY_PHONE
cur_rec, SERVICE_PROVIDER_FAX_NUMBER
cur_rec, SERVICE_PROVIDER_HOME_PHONE
cur_rec, SERVICE_PROVIDER_HOURLY_RATE
cur_rec, SERVICE_PROVIDER_JOB_TITLE
cur_rec, SERVICE_PROVIDER_METHOD
cur_rec, SERVICE_PROVIDER_MOBILE_PHONE
cur_rec, SERVICE_PROVIDER_PAGER
cur_rec, SERVICE_PROVIDER_RATES
cur_rec, SER_PROV_SHIFT_DIFFERENTIAL
cur_rec, SERV_PROV_STATE_PROVINCE
cur_rec, SERVICE_PROVIDER_STATUS
cur_rec, SERV_PROV_WEB_SITE_ADDRESS
cur_rec, SERVICE_PROVIDER_WORK_PHONE
cur_rec, SERV_PROV_ZIP_POSTAL_CODE
cur_rec, UPDATE
cur_rec SKILL.
cur_rec, STATUS
cur_rec subregion.
cur_rec, TRADE
cur_rec, VENDOR_ID
cur_rec, VENDOR_PURCHASING_FAX
cur_rec, VENDOR_SITECODE
cur_rec, VENDOR_TICKET
cur_rec, VENDOR_COMPANYNAME
cur_rec, VIP
cur_rec, WORK_ORDER_NO
cur_rec, WORK_REQUEST
cur_rec, WORK_REQUEST_CLASS
cur_rec, WORK_TYPE
cur_rec, WR_COST
cur_rec, WR_DESCRIPTION
cur_rec, WR_DISPATCH_METHOD
cur_rec, WR_STATUS
cur_rec, COUNTRY
ld_curr_time
);
END LOOP;
COMMIT;
exception
while others then
Rollback;
dbms_output.put_line('SQLCODE:'||) SQLCODE. "Error :'|| SQLERRM);
end work_kiosk_full;
Note: total record inserted 849000.
The same code does not work with big collect in would adopt.
Please help me why this is happening.
Thanks and greetings
Shyam ~.Shyam,
I agree with Billy.
Why are you not using an INSERT..SELECT ? Also, what are you trying to achieve by - incremental commits? - copying data from one table to another (using expensive I/O)? - using dynamic DML? Most of these approaches are typically wrong - and not recommended for scalable and performant Oracle applications.
I could see you using a CURSOR for LOOP if you change the data inserted so that you could not encapsulate the changes in a query, but you do an insert in right in the table of your cursor. A much more effective way would be to use the following changes I made to your code sample:
PROCEDURE WORK_KIOSK_FULL(AN_JOBID IN NUMBER, AC_SQLCODE OUT VARCHAR2, AC_SQLERRM OUT VARCHAR2) IS BEGIN EXECUTE IMMEDIATE 'truncate table crstools.drt_bom_work_kiosk'; /* Note: The APPEND hint forces a Direct Path INSERT (see Link below code sample) and is combined with the NOLOGGING Hint */ /* To dramtically increase performance. The Direct Path INSERT inserts records above the High-Water Mark on the table. */ INSERT /*+ APPEND NOLOGGING */ INTO CRSTOOLS.DRT_BOM_WORK_KIOSK (JT_ID ,ACTUAL_HRS_TO_COMPLETE ,ACTUAL_HRS_TO_RESPOND ,AGENT_NAME ,ASAGENT_SOE_ID ,AP_SYSTEM -- ,ASSIGN_WORK_REQUEST_COMMENT /* I commented out this COLUMN because it doesn't make sense to me to insert */ ,BILLABLE /* a couple of space characters into a table. If the intent is to leave the column NULL */ ,BUILDING /* don't include it in your INSERT statement and it will be NULL. If there is a valid reason */ ,BUILDING_ID /* for inserting the spaces, then remove the "line comments" from the insert and select statments */ ,BUILDING_STATUS ,CAUSE_TYPE -- ,COMMENTS ,COMPLETED_BY ,CONTACT_EMAIL ,CONTACT_NAME ,CONTACT_PHONE ,CORP_CODE ,COST_CENTER ,DATE_CLOSED ,DATE_COMPLETED ,DATE_REQUESTED ,DATE_RESPONDED ,DATE_RESPONSE_ECD ,DATE_SCHEDULED ,DEFERRAL_REASON ,DESCRIPTION ,ECD ,FACILITY_MANAGER ,FLOOR ,GENERAL_LEDGER -- ,KIOSK_DATE_REQUESTED -- ,KIOSK_DISPATCH_CONFIRMED -- ,KIOSK_DISPATCHED ,LINKED_EQUIPMENT_ALIAS ,LINKED_EQUIPMENT_ID ,LINKED_EQUIPMENT_NAME ,ORIGINATOR_TYPE -- ,PAYMENT_TERMS ,PRIORITY_CODE ,PROBLEM_TYPE ,PROPERTY ,QUOTE_TOTAL ,REGION ,REPAIR_DEFINITIONS ,REPAIR_DESCRIPTION ,REQUESTOR -- ,REQUESTOR_COST_CENTER ,REQUESTOR_EMAIL ,REQUESTOR_NAME ,REQUESTOR_PHONE -- ,RESPONSE_TIME ,ROOM ,SERVICE_PROVIDER ,SERVICE_PROVIDER_ADDRESS ,SERVICE_PROVIDER_CITY ,SERVICE_PROVIDER_CODE ,SERVICE_PROVIDER_COUNTRY ,SERVICE_PROVIDER_CURRENCY ,SERVICE_PROVIDER_DESCRIPTION ,SERV_PROV_DISPATC_HMETHOD ,SERV_PROV_DOUBLE_TIME_RATE ,SERVICE_PROVIDER_EMAIL ,SERV_PROV_EMERGENCY_PHONE ,SERVICE_PROVIDER_FAX_NUMBER ,SERVICE_PROVIDER_HOME_PHONE ,SERVICE_PROVIDER_HOURLY_RATE ,SERVICE_PROVIDER_JOB_TITLE ,SERVICE_PROVIDER_METHOD ,SERVICE_PROVIDER_MOBILE_PHONE ,SERVICE_PROVIDER_PAGER ,SERVICE_PROVIDER_RATES ,SER_PROV_SHIFT_DIFFERENTIAL ,SERV_PROV_STATE_PROVINCE ,SERVICE_PROVIDER_STATUS ,SERV_PROV_WEB_SITE_ADDRESS ,SERVICE_PROVIDER_WORK_PHONE ,SERV_PROV_ZIP_POSTAL_CODE -- ,SHIFT -- ,SKILL ,STATUS ,SUBREGION -- ,TRADE ,VENDOR_ID ,VENDOR_PURCHASING_FAX ,VENDOR_SITECODE ,VENDOR_TICKET ,VENDOR_COMPANYNAME ,VIP ,WORK_ORDER_NO ,WORK_REQUEST ,WORK_REQUEST_CLASS ,WORK_TYPE -- ,WR_COST ,WR_DESCRIPTION -- ,WR_DISPATCH_METHOD ,WR_STATUS ,COUNTRY ,CREATE_DATE ) VALUES (SELECT DISTINCT JT.JT_ID AS JT_ID ,NVL((ROUND((JT_DATE_COMPLETED - JT_DATE_REQUESTED) * 24,2)),0) AS ACTUAL_HRS_TO_COMPLETE ,NVL((ROUND((JT_DATE_RESPONDED - JT_DATE_REQUESTED) * 24,2)),0) AS ACTUAL_HRS_TO_RESPOND ,PEO1.PEO_NAME AS AGENT_NAME ,PEO1.PEO_USER_NAME AS ASAGENT_SOE_ID ,LE.LGLENT_DESC AS AP_SYSTEM -- ,' ' AS ASSIGN_WORK_REQUEST_COMMENT ,DECODE(JT.JT_BILL_ID,138802,'CLIENT BILLABLE' ,138803,'CONTRACTED' ,138804,'INTERNAL BILLABLE',NULL,' ') AS BILLABLE ,BL.BLDG_NAME_CC AS BUILDING ,BL.BLDG_ID_LS AS BUILDING_ID ,DECODE(BL.BLDG_ACTIVE_CC, 'Y', 'ACTIVE', 'INACTIVE') AS BUILDING_STATUS ,DECODE(JT.JT_WRK_CAUSE_ID,141521,'STANDARD WEAR AND TEAR' ,141522,'NEGLIGENCE' ,141523,'ACCIDENTAL' ,141524,'MECHANICAL MALFUNCTION' ,141525,'OVERSIGHT' ,141526,'VANDAL' ,141527,'STANDARD' ,141528,'PROJECT WORK' ,6058229,'TEST',NULL,' ') AS CAUSE_TYPE -- ,' ' AS COMMENTS ,PEO3.PEO_NAME AS COMPLETED_BY ,JT.JT_REQUESTOR_EMAIL AS CONTACT_EMAIL ,JT.JT_REQUESTOR_NAME_FIRST || ' ' ||JT.JT_REQUESTOR_NAME_LAST AS CONTACT_NAME ,JT.JT_REQUESTOR_PHONE AS CONTACT_PHONE ,CC.CSTCTRCD_APCODE AS CORP_CODE ,CC.CSTCTRCD_CODE AS COST_CENTER ,JT.JT_DATE_CLOSED AS DATE_CLOSED ,JT.JT_DATE_COMPLETED AS DATE_COMPLETED ,JT.JT_DATE_REQUESTED AS DATE_REQUESTED ,JT.JT_DATE_RESPONDED AS DATE_RESPONDED ,JT.JT_DATE_RESPONSE_ECD AS DATE_RESPONSE_ECD ,JT.JT_DATE_SCHEDULED AS DATE_SCHEDULED ,DECODE(JT.JT_DEF_ID,139949,'WTG VENDOR RESPONSE' ,139950,'WAITING ON PARTS' ,139951,'LABOR AVAILABILITY' ,139952,'DEFERRED- HI PRI WORK' ,139953,'WTG APPROVAL' ,139954,'FUNDING REQUIRED' ,139955,'ACCESS DENIED' ,139956,'WTG MATERIAL',NULL,' ') AS DEFERRAL_REASON ,JT.JT_DESCRIPTION AS DESCRIPTION ,JT.JT_DATE_RESCHED_ECD AS ECD ,FMG.FACILITY_MANAGER AS FACILITY_MANAGER ,FL.FLOORS_TEXT AS FLOOR ,GL.GENLED_DESC AS GENERAL_LEDGER -- ,' ' AS KIOSK_DATE_REQUESTED -- ,' ' AS KIOSK_DISPATCH_CONFIRMED -- ,' ' AS KIOSK_DISPATCHED ,EQP.EQUIP_CUSTOMER_CODE AS LINKED_EQUIPMENT_ALIAS ,EQP.EQUIP_ID AS LINKED_EQUIPMENT_ID ,EQP.EQUIP_TEXT AS LINKED_EQUIPMENT_NAME ,DECODE(JT_ORIGINATOR_TYPE_ID,1000,'PROJECT MOVE REQUEST' ,138834,'CUSTOMER INITIATED CORRECTION' ,138835,'CUSTOMER INITIATED REQUEST' ,138836,'CORRECTIVE MAINTENANCE' ,138837,'CONFERENCE ROOM BOOKING' ,138838,'PROJECT INITIATED REQUEST' ,138839,'PLANNED PREVENTIVE MAINTENANCE' ,138840,'SELF INITATED REQUEST',NULL,' ') AS ORIGINATOR_TYPE -- ,' ' AS PAYMENT_TERMS ,PRIORITY_TEXT AS PRIORITY_CODE ,SWOTY.SWORKTYPE_TEXT AS PROBLEM_TYPE ,PROP.PROPERTY_NAME_CC AS PROPERTY ,JT.JT_COST_QUOTE_TOTAL AS QUOTE_TOTAL ,PAR.LEVELS_NAME AS REGION ,DECODE(JT.JT_REPDEF_ID,141534,'ADJUSTED SETTING' ,141535,'TRAINING FOR END' ,141536,'NEW REQUEST' ,141537,'NO REPAIR REQUIR' ,141538,'REPLACED PARTS' ,141539,'REPLACE EQUIPMEN' ,1000699,'NEW REQUEST',NULL,' ') AS REPAIR_DEFINITIONS ,JT.JT_REPAIRDESC AS REPAIR_DESCRIPTION ,JT.JT_REQUESTOR AS REQUESTOR -- ,' ' AS REQUESTOR_COST_CENTER ,JT.JT_REQUESTOR_EMAIL AS REQUESTOR_EMAIL ,JT.JT_REQUESTOR_NAME_FIRST AS REQUESTOR_NAME ,JT.JT_REQUESTOR_PHONE AS REQUESTOR_PHONE -- ,' ' AS RESPONSE_TIME ,RM.ROOM_NAME_CC AS ROOM ,P1.PEO_PROVIDER_CODE1 AS SERVICE_PROVIDER ,P1.PEO_ADDRESS_1 AS SERVICE_PROVIDER_ADDRESS ,PEOCITY.CITY_TEXT SERVICE_PROVIDER_CITY ,P1.PEO_PROVIDER_CODE1 AS SERVICE_PROVIDER_CODE ,PEOCITY.CITY_COUNTRY_NAME AS SERVICE_PROVIDER_COUNTRY ,PEOCUR.CURRENCY_TEXT AS SERVICE_PROVIDER_CURRENCY ,P1.PEO_NAME AS SERVICE_PROVIDER_DESCRIPTION ,P1.PEO_DISPATCH_METHOD AS SERV_PROV_DISPATC_HMETHOD ,P1.PEO_RATE_DOUBLE AS SERV_PROV_DOUBLE_TIME_RATE ,P1.PEO_EMAIL AS SERVICE_PROVIDER_EMAIL ,P1.PEO_EMERGENCY_PHONE AS SERV_PROV_EMERGENCY_PHONE ,P1.PEO_FAX AS SERVICE_PROVIDER_FAX_NUMBER ,P1.PEO_HOME_PHONE AS SERVICE_PROVIDER_HOME_PHONE ,P1.PEO_RATE_HOURLY AS SERVICE_PROVIDER_HOURLY_RATE ,P1.PEO_TITLE AS SERVICE_PROVIDER_JOB_TITLE ,P1.PEO_METHOD_ID AS SERVICE_PROVIDER_METHOD ,P1.PEO_CELL_PHONE AS SERVICE_PROVIDER_MOBILE_PHONE ,P1.PEO_PAGER AS SERVICE_PROVIDER_PAGER ,P1.PEO_RATE_DIFFERENTIAL AS SERVICE_PROVIDER_RATES ,P1.PEO_RATE_DIFFERENTIAL AS SER_PROV_SHIFT_DIFFERENTIAL ,PEOCITY.CITY_STATE_PROV_TEXT AS SERV_PROV_STATE_PROVINCE ,DECODE(P1.PEO_ACTIVE, 'Y', 'ACTIVE', 'INACTIVE') AS SERVICE_PROVIDER_STATUS ,P1.PEO_URL AS SERV_PROV_WEB_SITE_ADDRESS ,P1.PEO_PHONE AS SERVICE_PROVIDER_WORK_PHONE ,P1.PEO_POSTAL_CODE AS SERV_PROV_ZIP_POSTAL_CODE -- ,' ' AS SHIFT -- ,' ' AS SKILL ,DECODE(JT.JT_BIGSTATUS_ID,138813,'NEW' ,138814,'PENDING' ,138815,'OPEN' ,138816,'COMPLETED' ,138817,'CLOSED' ,138818,'CANCELLED',NULL,' ') AS STATUS ,LEV.LEVELS_NAME AS SUBREGION -- ,' ' AS TRADE ,P1.PEO_LS_INTERFACE_CODE1 AS VENDOR_ID ,P1.PEO_FAX AS VENDOR_PURCHASING_FAX ,P1.PEO_VENDOR_SITE_CODE AS VENDOR_SITECODE ,JT.JT_ID AS VENDOR_TICKET ,P1.PEO_NAME AS VENDOR_COMPANYNAME ,JT.JT_REQUESTOR_VIP AS VIP ,WO.WO_ID AS WORK_ORDER_NO ,JT.JT_ID AS WORK_REQUEST ,JT.JT_CLASS_ID AS WORK_REQUEST_CLASS ,WOTY.WORKTYPE_TEXT AS WORK_TYPE -- ,' ' AS WR_COST ,JT.JT_DESCRIPTION AS WR_DESCRIPTION -- ,' ' AS WR_DISPATCH_METHOD ,DECODE(JT.JT_BIGSTATUS_ID,138813,'NEW' ,138814,'PENDING' ,138815,'OPEN' ,138816,'COMPLETED' ,138817,'CLOSED' ,138818,'CANCELLED',NULL,' ') AS WR_STATUS ,CTRY.COUNTRY_NAME AS COUNTRY ,SYSDATE --LD_CURR_TIME FROM CITI.JOBTICKET JT, CITI.PROPERTY PROP, CITI.BLDG BL, CITI.BLDG_LEVELS BLDGLVL, CITI.LEVELS LEV, CITI.LEVELS PAR, (SELECT CRSTOOLS.STRAGG(PEO_NAME) FACILITY_MANAGER, BLDGCON_BLDG_ID FROM CITI.BLDG_CONTACTS, CITI.PEOPLE WHERE BLDGCON_PEO_ID = PEO_ID AND BLDGCON_CONTYPE_ID IN (40181, 10142) GROUP BY BLDGCON_BLDG_ID) FMG, CITI.FLOORS FL, CITI.ROOM RM, CITI.GENERAL_LEDGER GL, CITI.LEGAL_ENTITY LE, CITI.COST_CENTER_CODES CC, CITI.EQUIPMENT EQP, CITI.WORKTYPE WOTY, CITI.SUBWORKTYPE SWOTY, CITI.WORK_ORDER WO, CITI.JT_WORKERS JTWO, CITI.PRIORITY, CITI.COUNTRY CTRY, CITI.PEOPLE P1, CITI.PEOPLE PEO3, CITI.PEOPLE PEO1, CITI.CITY PEOCITY, CITI.CURRENCY PEOCUR WHERE JT.JT_BLDG_ID = BL.BLDG_ID AND BL.BLDG_ID = BLDGLVL.BLDG_LEVELS_BLDG_ID AND BLDGLVL.BLDG_LEVELS_LEVELS_ID = LEV.LEVELS_ID AND LEV.LEVELS_PARENT = PAR.LEVELS_ID(+) AND PROP.PROPERTY_ID = BL.BLDG_PROPERTY_ID AND BL.BLDG_ACTIVE_LS = 'N' AND JT.JT_FLOORS_ID = FL.FLOORS_ID(+) AND JT.JT_ROOM_ID = RM.ROOM_ID(+) AND JT.JT_BLDG_ID = FMG.BLDGCON_BLDG_ID(+) AND JT.JT_GENLED_ID = GL.GENLED_ID(+) AND GL.GENLED_LGLENT_ID = LE.LGLENT_ID(+) AND JT.JT_CSTCTRCD_ID = CC.CSTCTRCD_ID(+) AND JT.JT_EQUIP_ID = EQP.EQUIP_ID(+) AND JT.JT_ID = JTWO.JTW_JT_ID(+) AND JT.JT_WORKTYPE_ID = WOTY.WORKTYPE_ID(+) AND JT.JT_SWORKTYPE_ID = SWOTY.SWORKTYPE_ID(+) AND JT.JT_WO_ID = WO.WO_ID AND JT.JT_PRIORITY_ID = PRIORITY_ID(+) --AND jt.jt_date_requested >= ADD_MONTHS (SYSDATE, -12) AND JT.JT_LAST_UPDATE >= ADD_MONTHS(LD_CURR_TIME, -12) AND BL.BLDG_COUNTRY_ID = CTRY.COUNTRY_ID AND JTWO.JTW_PEO_ID = P1.PEO_ID(+) AND P1.PEO_CITY_ID = PEOCITY.CITY_ID(+) AND JT.JT_COMPLETED_BY_PEO_ID = PEO3.PEO_ID(+) AND P1.PEO_RATE_CURRENCY_ID = PEOCUR.CURRENCY_ID(+) AND JT.JT_AGENT_PEO_ID = PEO1.PEO_ID(+) ); COMMIT; EXCEPTION WHEN OTHERS THEN ROLLBACK; DBMS_OUTPUT.PUT_LINE('SQLCODE :' || SQLCODE || ' Error :' || SQLERRM); END WORK_KIOSK_FULL;
Here is the link for infor the [Oracle Direct - Path INSERT | http://download.oracle.com/docs/cd/B10501_01/server.920/a96524/c21dlins.htm#10778].
Also, if you are really wanting to use a CURSOR for LOOP COLLECTION in BULK, I suggest you read the article by Steven Feuerstein [PL/SQL practices: GEM VRAC | http://www.oracle.com/technology/oramag/oracle/08-mar/o28plsql.html].
I hope this helps.
Craig...If my response or response from another person was helpful, please mark accordingly
Maybe you are looking for
-
Can I use duckhead ipad to macbook pro?
-
HP deskjet 3520: impossible to connect my HP 3520 wireless
I changed ISP broadband yesterday, and I have a new router - my printer not connecting wireless now. I tried to restore the values by default, still no solution. Can anyone help please?
-
I have a question about the structure of the event.If you are doing an event for "key down", where can you specify which key is pressed. instead of any key
-
How can I download my playlist of youtube to an mp3 player?
How can I download my you tube playlist (just audio) to a mp3 player? Or record the songs on my pc to download on my mp3? IM lost.Thank youSteph B
-
You can turn the photo in Windows Photo Viewer
Judging by the large number of comments, rotating an image in Photo Viewer seems to be a common problem and I do not understand why. Have spent a lot of time to wade in these messages, and am even more close to an answer. I followed the instructions