Adjustments to the sliders in brush adjustent are applied globally, not locally

Similar Questions

• How to make the sliders on two plots are linked

  I have two graphics of waveform on the face before (Ch3 and Ch4).  Each of them have the same X axis scale and for each have 2 cursors (0 and 1 slider slider). I want to make cursors follow one another.  For example, I select cursor Ch3 0 and move it to a certain position of X.  I then want to Ch4 cursor 0 to the same X position on the waveform of Ch4.  If I then move the cursor to 1 Ch4 cursor at a certain position of X, I want 1 Ch3 cursor to move to the same X position on the wave form Ch3.

  I tried using the event Structures and it works very well if I want to just Ch4 sliders to follow the Ch3 sliders.  But if I want to be able to adjust and have follow-up else I can't make it work.  If I could get two event structures in the same loop, it could work but A) I read is not a good idea and B) I have been unable to operate anyway.  I'm sure it's possible... could someone give me some suggestions?  Thank you.

  What do you mean by

  lme999 wrote:

  If I could get two event structures in the same while loop...

  ?

  You can manage events in the structure of the event (just set up 2 events).

  (It is true that it is not a good idea to have 2 event structures in a while loop. It's the nature of the stream... the while loop runs only when the two structures event run exactly once. Anyway, usually 1 event structure is sufficient.)

• The 2015 CC/brush flash pencil tool does not work with Cintiq

  I recently bought a Wacom Cintiq 22HD and all new Adobe software.  I mainly use Photoshop and Flash to the drawing and animation. (Before I was running cs6 products on windows 7 on a Tablet and everything worked fine).

  My configuration: Lenovo IdeaPad Y 50-70.  Windows 8.1.  Wacom Cintiq 22HD with latest driver. Adobe Flash CC 2015.

  The main problem I have is in Flash.  Everything works fine in Photoshop, I can draw on the screen without problem.  But I can't use the brush or pencil in Flash tool. When I draw the mouse, all right. When I use the pen, he made this super long line on the side of the document.  If I try to draw something, he's going to draw, but super far from where it is supposed to. The strange thing is that when I use the brush with a normal mouse tool, it works fine. When I use the online tool, pen tool or other tools, my cintiq pen works very well. It is ONLY the brush and pencil tools when using my Cintiq. I have to be able to draw with my Cintiq in Flash.

  
  

  Are there any solutions for this problem? Help, please!
  

  

  Hi all

  The problem associated with the brush and the pencil drawing in Flash Professional CC 2015 configuration dual monitor with Wacom devices has been fixed in the latest update. Please update Flash Professional CC 2015 v15.0.1.179.

  Rgds,

  Mukesh

• The session-state item values are used is not in the redirection Page

  Hello
  I have a P7_PERIOD point Page, I put the value of the session state for the click of a button. I can confirm that the value of P7_PERIOD is correctly set in session state after the button is clicked. When I try and P7_PERIOD allows to set the value of an element in another page (P17_PERIOD) on the click of a button, it does not recognize the value of new session state.
  
  For the second button, I'm telling you "Redirect to Page in this application" on Page 17
  Place these items: P17_PERIOD
  With these values: & P7_PERIOD.
  
  P7_PERIOD has the correct values in session state, but passes the old values to P17_PERIOD during the click on the second button.
  
  Any suggestions are greatly appreciated.
  Thank you
  John

  Johnny98 wrote:

  I have a P7_PERIOD point Page, I put the value of the session state for the click of a button. I can confirm that the value of P7_PERIOD is correctly set in session state after the button is clicked. When I try and P7_PERIOD allows to set the value of an element in another page (P17_PERIOD) on the click of a button, it does not recognize the value of new session state.

  For the second button, I'm telling you "Redirect to Page in this application" on Page 17
  Place these items: P17_PERIOD
  With these values: & P7_PERIOD.

  P7_PERIOD has the correct values in session state, but passes the old values to P17_PERIOD during the click on the second button.

  Redirections are run in the browser using URL generated during page processing. This means that the redirect for the second button URL uses the value of P7_PERIOD is during the broadcast of the page, not as it is in session state after it is defined by the first button.

  The second button must execute a submit and branch to retrieve the new value of P7_PERIOD. If there are page accept treatment that should not be run when the user clicks this button, use a branch point before the execution of these processes (for example on submit: before calculating), or condition the process on the other buttons.

• Never backed up system before. Want to backup on CD. When the backup system, iin System Image, it does not 'local '. At only player to select. How can I save on a cd?

  Trying to backup cd my system does not give the option of backup on 'local' as shown in the video.  What it offers is DVD player.

  I never saved before.

  The DVD player is the right to choose.  You can use several DVDs CDs simply aren't enough great.  It would be more simple create a system image on an external HARD drive.

• is there a zero after all the sliders on all images in a folder?

  is there a zero after all the sliders on all images in a folder? Lightroom is the application which seems to be the automatic on all images tone as the sliders of each image are different. all the import options are closed off or to "none", so I have no idea why LR applies these settings. When I reset pictures it puts back the auto import settings. If lightroom is the perception of those as reference. Help, please!

  Go to your preferences, select the Presets tab, uncheck the default all settings, but especially the "apply auto tone adjustments" of development one. For good measure, you can also hit the button 'Reset all parameters of development by default'.

• adding and positioning of the sliders with crslist

  Hello

  I always write my program and having difficluties with the graphic thing and especially with the sliders. I use the cursorlist to add cursors executing according to certain events in my data file, because I have a lot of ugly data, I charge only 20 seconds of data at a time in my chart area, so it does not always show the sliders and sometimes there are 2 sliders on the screen. Now, the thing is; When I scroll through my data (with scroll bar controller) data are to be recharged each time, (or with an interval of 5 seconds data) then the sliders must also be again, but it happens sometimes and sometimes not? These are attributes of list of cursors that I Wired:

  Name

  Position.X

  Let it slide

  Cursor mode

  Style

  Does anyone have tips to better understand the thing whole slider?

  Best regards

  Thijs Boreas

  Solved...

  It was a timing issue, I solved it with a sub vi with the cursor of handeling inside!

• Can not find the library when you adjust created book with Blurb

  I have created a book with lightroom 4 and then exported in pdf to show the client. Now I have to make some adjustments, but the photo shown and available are only those already contained in the book and not all the photos of the library (of this specific work). I can't access the other photos and I don't know how to be included in the book unless I have create a new. It's like I have to do the same work twice. Can you help me please?

  If you have the book go to the collection of recorded books. Right-click (Ctrl-click) on that collection name and choose "set as target Collection.

  Back to other folders and select the picture you want to add, and then press the B key.

  When you return to the book module you can drag additional photos of the film in the pages.

• I don't see the pin of an adjustment brush.

  I found this in Lightroom help:

  <

  Working with multiple local adjustments

  When applying and working with multiple local adjustments, keep in mind the following:

  • Click any pin to select it. A selected PIN has a black Center. Pins not selected are white Uni.
  • Press H once show the PIN selected; Press H to hide the pins; Press H once to show all pins.
  • When the adjustment Brush tool is selected, there are only the stems of adjustment to change. When the graduated filter tool is selected, only graduate filter pins are available to edit.
  • The adjustment Brush tool drawer allows you to specify options for two brushes, A and B. Select a brush by clicking on the letter, or switch between brushes by pressing the forward slash (/) key. Brush options "stick" regardless of the effect that you choose to apply until you change them.

  >

  My problem is that it does not work as advertised. I experimented on a photo and you can do my brushes A and B. But I see that edit for A PIN. The pin code of B shows ever upward. Hitting H repeatedly is that toggle the visibility of the pine has.

  Nevermind, I just found out what that mean make a new brush. It is not A and B, but there is another control called New just under the icons for picture adjustments. I'm not sure what the logic is behind having an and B as a brush. They become two brushes controlled by a PIN.

• Why my mouse and my pen are jerking around the sliders in the develop module?

  I have a Logitech bluetooth mouse, Apple bluetooth mouse and a Wacom tablet. All these devices are jerking around when I try to use the sliders to develop. I can click on contrast and when I start to move, it will just move very fast then come back and I can't control it. When I click on, it remains on this issue and continues to move even when I try to click on another slider. I disable all but one device at a time, and it makes no difference. At all the most recent drivers.  Have 50 GB of cache on its own internal 1 TB drive. Can live with shabby performances with brushes and tools, but cannot do much if you can't work the sliders.

  

  I did it from the start, turn off all but one I would use. Tablet's intuos PTK640 old and verification with Wacom on a pilot as being more shown on their site. So, do not try to use it now.

  Apple mouse now works normally. I saw an article on the deletion of a file in the library and let them rebuild on restart and did. Can be what makes the difference because I did nothing more to LR.

  Mouse Logitech is always useless in LR. He's older, but a current driver. I think the problem is with the driver and not LR. It will replace and have another go at him. Apple mouse is not the best design for a work of LR. Hope I can get the tablet in game.

  Thanks for the help and I will consider this problem solved for now at least.

• How to increase or decrease the effect of an adjustment brush in Lightroom CC? In Lightroom 5, I could hover over the PIN and drag the two-way arrow left or right. This feature seems to have disappeared in the CC version.

  How to increase or decrease the effect of an adjustment brush in Lightroom CC? In Lightroom 5, I could hover over the PIN and drag the two-way arrow left or right. This feature seems to have disappeared in the CC version.

  I'll answer one of your three messages that asked this question.  If possible, please remove the other two.

  Hover and dragging moves the axis as it should.  The cursor turns into a hand to indicate the area brushed, it moves.

  Hover over the pin code, press the Alt/Opt key and drag left and right and the effect will become less and more.   The cursor turns into a two-headed arrow to indicate that the function of the drag has changed.  If you are not hovering over a pin code and press the Alt/Opt, then the cursor turns into a brush to erase to remove the adjustment every time you paint.

• my photos blurry when I adjust the sliders in the develop module

  I recently moved my copy of LR 5 and my catalog to my most recent (< 1 year) Macbook Pro.  The system uses the Yosemite OS with 8 GB of RAM. I have my catalog on hard drive of my computer and the images on a new SSD using a Firewire connection. (I also tried USB 3.0, but no difference)

  Overall, performance in LR is fast enough, but when adjust the sliders in module development, photo blurry while the action is.  This makes editing very difficult.

  I saw a few posts on this problem, but no real answers that address or to determine the real cause.

  Someone at - it is not a solution to this problem?  If it is performance of LR on Mac, I will be switching products.

  Hello. I have the same problem with the same data (Lr 5, Macbook Pro, Yosemite (the question was thus under the Mavericks), 8 GB RAM). A conversation of months with the assistance of Adobe team and run all of their instructions changed nothing. I store the catalog and photos on the hard drive, this isn't on the record in my case. I tried optimization (Optimize performance), increase in size max, reinstall and so on, but all are useless (which should for me as my Macbook, OS and Lr are up-to-date and it seems not to be a Preferences but a problem of 'root'). They said that my computer has reportedly not enough memory (so that the system requirements are "2 GB (8 GB recommended)" and defects of drivers. Who is questionable, as other programs (including the graphic editors) work well. In my humble opinion, it may be a bug between Lr and, probably, the high-resolution Retina display or my kind of graphics card.

  I wonder if the problem is systematic.

• All images are links (red x) but only on the user account of my husband on Windows Vista Edition Home Premium. The settings have been adjusted. Windows has been updated.

  My operating system is Vista Home Premium. We have two user accounts: mine (Administrator) and my husband.  On his account, all his images links are broken.  Images with assistance, the Explorer, Google (weather, calendar) desktop tools.  I did basic with verification troubleshooting settings, and the launch of Windows Update.  What is different on his user account?

  Hello

  1 are there any changes or updates made on the computer before the show?

  2. what browser you use on the computer?

  Method 1:

  If you use Internet Explorer and you should disable or hide pictures, then I suggest you to follow the following steps:

  a. open Internet Explorer.

  b. click on Tools.

  c. click on Internet Options.

  d. on the Advanced tab, check the option show the pictures.

  e. click apply and OK.

  f. restart Internet Explorer.

  Note: If the option to show images is disabled, you will not be able to see the photos using Windows and also supports.

  Reference:

  Images are not displayed on Web sites in Internet Explorer

  http://support.Microsoft.com/kb/283807

  Method 2:

  I suggest to optimize Internet Explorer and check to see if it helps.

  http://support.Microsoft.com/kb/936213/ro

  Note: Please note that reset settings Internet Explorer (IE) will reset all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  Method 3:

  I suggest to create a new user account and check if the problem persists.

  Create a user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the new user profile resolves the problem, you can screw the corrupted profile and re - install the applications and programs.

  Reference:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if it helps.

• I can not adjust the size of the sliders on the right side of the screen

  The standard font for the sliders control in Windows 7 is too small for me.  Under XP, I used to have control over the size of the people but not now.  I mean the arrows up and down cursors that pop up on some pages that allow to go up or down scrolling.  I s it possible in Windows 7?

  You're welcome, Pete and thank you very much for your comments!
  Would be great if you can mark my post as the answer, while others reading this have more easily...
  Have a great day!

  See you soon
  Julia

• Photoshop Brushes of 13 elements are all round. How do I change back to the original default brushes?

  All my brushes Photoshop elements 13 changed to round. How to revert to the original default brushes?

  [Left non-technical Forum Lounge for forum specific program...] MOD]

  Reset the Brush tool:

  Reset the Brush tool