Admin Connection OK but no PING

Similar Questions

• Remote Desktop connection failed but successful ping

  I am trying to connect via RDC (Remote Desktop Connection) of the SOURCE to the DESTINATION.

  I welcomed the remote connections on the DESTINATION and added couple of users who are allowed to connect remotely.
  I can ping DESTINATION SOURCE successfully.

  None of the responses failed to control below SOURCE
  C:\ > ping-l 512 f - n 100

  Strange thing is that I can remote login from DESTINATION to SOURCE, but not vice versa.

  I don't remember making any additional settings to other machines that are connected to remote. Only one machine (the DESTINATION) to the question.

  Any thoughts are appreciated.

  Thank you
  Biausse.

  On the target computer, make sure that Port 3389 is not blocked by a firewall.  If you use Windows Firewall, go to the control panel Windows Firewall, check that "Don't allow Exceptions" is not checked in the "Général" tab, then click the 'Exceptions' tab and make sure there is a check mark next to "Remote Desktop".

  You can also ensure that a program is to accept incoming remote desktop connections to raise a command prompt (start-> Run-> "cmd") and entering the following command:
  netstat - year |    find "3389.
  If all goes well, you should see the following line returned:
  TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING

  HTH,
  JW

• Satellite Pro M70-132: excellent WiFi connection but the pings are slow

  Hi all...
  My Satellite Pro M70-132 have problems with Wi - Fi connections (WiFi built in)... Generally, when the connection is excellent (indicator of windows), the pings are slow - very long time: 1212ms, 325ms, 645ms, 2112ms, 91ms, s 168ms... etc 'demand time limit has expired' (or sth like this).
  I have updated with the latest version of the Intel WiFi driver - it does not work...
  I installed new system - it does not work...

  Is it possible, that LAN WiFi is dead on my M70-132? How can I check before sending my 'Toshi' to the service?

  (BTW - built-in Bluetooth has been switched off...)

  I was tempted to access with several AP and also ad hoc. Every time, same results... connection strong-great but pings are slow... and often ping timeout...

  The IP address has been set manually and automatically - it does not work... too multidimensional :-(

  It's not metter WEP encryption is enabled, 'on' or 'off' and no authentication method does not change the situation with WLAN...

  Post edited by: maxgoldie

  Hello

  If the work of WLan connection and you are connected to the router so I guess everything's ok.
  Time to ping depends on not always the strength of the signal.

  If you ping other ip on the net if the time depends on the provider and type of connection.
  But if you ping your WLan router and it s very slow so it s a bit strange.

  If you think there could be something wrong with the Wlan card then you can try asking for help ASP.

• Connected to the ASA via the "VPN Client" software, but cannot ping devices.

  I have a network that looks like this:

  

  I successfully connected inside the ASA via a software "Client VPN" tunnel network and got an IP address of 10.45.99.100/16.

  I am trying to ping the 10.45.99.100 outside 10.45.7.2, but the ping fails (request timed out).

  On the SAA, including the "logging console notifications" value, I notice the following message is displayed:

  "% 305013-5-ASA: rules asymmetrical NAT matched for flows forward and backward; "Connection for icmp src, dst outside: 10.45.99.100 inside: 10.45.7.2 (type 8, code 0) rejected due to the failure of reverse path of NAT.

  I have a vague feeling that I'm missing a NAT rule of course, but not all. What did I miss?

  Here is my configuration of ASA: http://pastebin.com/raw.php?i=ad6p1Zac

  Hello

  You seem to have a configured ACL NAT0 but is not actually in use with a command "nat"

  You would probably need

  NAT (inside) 0-list of access inside_nat0_outside

  He must manage the NAT0

  Personally, I would avoid using large subnets/networks. You probably won't ever have host behind ASA who would fill / 16 subnet mask.

  I would also keep the pool VPN as a separate network from LANs behind ASA. The LAN 10.45.0.0/16 and 10.45.99.100 - 200 are on the same network.

  -Jouni

• Once the VPN connection is established, cannot ping or you connect other IP devices

  Try to get a RV016 installed and work so that people can work from home.  You will need to charge customers remote both WIN XP and MAC OS X.

  Have the configured router and works fine with the VPN Linksys client for WIN XP users.  Can connect, ping, mount the shared disks, print to printers to intellectual property, etc.

  Can connect to the router fine with two VPN clients third 3 for Mac: VPN Tracker and IPSecuritas.  However, once the connection is established, cannot ping the VPN LinkSYS router or any other IP address on the LAN Office.  Turn the firewall on or off makes no difference.

  Is there documentation anywhere that describes how the LinksysVPN for Windows Client communicates so these can be replicated in 3rd VPN clients from third parties for the Mac in OS X?

  The connection with IPSecuritas and VPN Tracker is performed using a shared key and a domain name.  It is not a conflict of IP address network between the client and the VPN 192.168.0.0/24 network.

  VPN Tracker and IPSecuritas are able to connect to the routers CISCO easy VPN with no poblem.

  Any ideas on how to get the RV016 to work for non-Windows users?

  We found and fixed the problem, so using VPN Tracker or current IPSecuritas on OS X people have access to the LAN via the RV016 machines. The "remote networks" in the screen BASE in VPN Tracker has been set on the entire subnet: 192.168.0.0/255.255.255.0 the in the RV016 has been set to the IP of 192.168.0.1 to 192.168.0.254 range. Even if the addresses are essentially the same, without specifying the full subnet in the RV016 has allowed the connection to do but prevented the VPN client machine to connect because the RV016 would pass all traffic to the Remote LAN. Change the setting of 'local group' in RV016 settings in the screen "VPN/summary/GroupVPN', 'Local Group Zone' for the subnet 192.168.0.0/24 full solved the problem.

• Connection VPN, but NO traffic

  This seems to be a common theme, but no other positions are exactly like mine.

  I have 4 clients of VPN (different versions) software that can connect to a VPN concentrator 3005. 2 clients work very well, they connect and can ping the server. I have two clients who connect but cannot ping the server.

  1 customer - who can NOT ping. VPN client 4.0.3c on XP Pro IP 10.10.0.0/16 private leaving a 501 PIX via Internet to a VPN 3005 concentrator inside a LAN 10.100.30.0/24.

  ---> PIX 501 VPN client - > Internet VPN Conc 3005--->---> LAN---> Server

  2nd customer who cannot ping. 4.6 VPN client. on XP Pro private IP 192.168.17/24 leaving a MS Win 2 K through the Internet server in a VPN 3005 concentrator inside a LAN 10.100.30.0/24.

  Client VPN---> Win 2 K server - > Internet VPN Conc 3005--->---> LAN---> Server

  Both can make the VPN connection to the VPN Conc throughout the day, but cannot ping the server. BUT other clients can ping the server.

  ??? Help?

  See MTU:

  http://www.Cisco.com/en/us/Tech/tk175/TK15/technologies_tech_note09186a0080093bc7.shtml

  NAT - T see:

  command:

  ISAKMP nat-traversal 20

  Link:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727a9.html#wp1027312

  Network address translation (NAT), including translation of address of Port (PAT), is used in many networks where IPSec is also used, but there are a number of incompatibilities that prevent IPSec packets to cross successfully. NAT route NAT devices enables ESP packets to pass through one or more NAT devices.

  The firewall supports NAT traversal as described by the Version 2 and Version 3 of the IETF "UDP Encapsulation of IPsec packets" project, available at http://www.ietf.org/html.charters/ipsec-charter.htmland NAT traversal is supported for dynamic and static cryptographic cards. Route NAT is disabled by default on the firewall.

  To enable NAT traversal, check that ISAKMP is enabled (you can activate it with the if_name isakmp enable command) then use the nat traversal [natkeepalive] command isakmp. (This command appears in the configuration if both ISAKMP is enabled and NAT traversal). If you have enabled NAT traversal, you can disable it with the nat-traversal No. isakmp command. The valid values for natkeepalive are from 10 to 3600 seconds. The default value is 20 seconds.

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• connection exists but not Internet

  I router AI UN xavier 7968 cnnecte my pc connection exists, but PA Internet

  I router AI UN xavier 7968 cnnecte my pc connection exists, but PA Internet

  Please re-post this in terms of the language in the menu drop-down list at the bottom of the page. This forum is for English only.

  

  If you can't find the language you need, additional language support can be found here...
  http://support.Microsoft.com/common/international.aspx

• PC won't connect wireless but with a wireless printing?

  I have windows XP and my PC won't connect wireless, but I can print wirelessly from the PC. This has happened once before, but Microsoft is not going to help me this time.

  Hello

  Please follow the steps in the link

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• I forgot my password for my admin user account, but I have a secondary account how to get the password for the admin

  original title: admin password.

  I forgot my password for my admin user account, but I have a secondary account how to get the password for the admin

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• OfficeJet J6450 - printer connects wireless but does not print job cable modem replacement

  Material: My printer is an OfficeJet J6450. I am running Windows Vista, current update.

  Probably triggering the event: I replaced my modem docsis 3.0 with a doscis 2.0 modem. PSI has remained the same. All other software and firewall remained the same.

  Dysfunction: After the replacement of cable modem, I found that I could print is no longer in my HP OfficeJet 6450. I would get an error in the printer window ' error - print. "  After the reboot after the publication of the initial error, I would get the error "error - sent to the printer.

  What I did:

  As a first step, I've uninstalled and reinstalled the HP software for the printer (complete package with exception of PhotoSmart and HP customer monitoring program).

  Use the connection for the network printer wizard, I entered the router password wireless to the printer. At first I don't have a connection. Then I rebooted the computer and the printer. I also returned to the default setting of network on the printer and repeated the configuration of the network. The connection was finally successful.

  The automatic test of the network page and the network printer wizard confirms the connection. Digital display of the printer and the HP diagnostic utility has also confirmed the connection. But the diagnostic utility is unable to print a test page and throw an error - "Print Test failed.

  The result disappointing:  I still can't anything to print wireless.

  ... Thanks in advance for your suggestions to get my printer back on...

  Go to start > Control Panel > printers and delete all instances of the printer.

  Then re-add the printer:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.  Get IP address of a Test of Netowork wireless on the front of the printer (usually in the network menu).
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Repository working is not connect you but can connect you to master repository

  Hello

  Recently, my password to the connection diagram (master repository) database has expired. I refreshed the password. When I tested the link with the master repository it is connected successfully, but when I tested connection with referential work he demonstrated an error of invalid connection sawing repository.

  
  

  Please help me in this problem.
  

  
  

  
  

  ERROR:

  
  

  oracle.odi.core.config.WorkRepositoryResourceFailureException: ODI-10182: Uncategorized exception for access to the repository.

  Could not make JDBC connection; nested exception is java.sql.SQLException: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused

  	at oracle.odi.core.repository.Repository.getWorkRepository(Repository.java:195)
  	at oracle.odi.core.OdiInstance.createWorkRepository(OdiInstance.java:504)
  	to oracle.odi.core.OdiInstance. < init > (OdiInstance.java:581)
  	at oracle.odi.core.OdiInstance.createInstance(OdiInstance.java:521)
  	at com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.testConnection(SnpsDialogLoginDetail.java:755)
  	to com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.access$ 4 (SnpsDialogLoginDetail.java:743)
  	to com.sunopsis.graphical.dialog.SnpsDialogLoginDetail$ 2.performAction(SnpsDialogLoginDetail.java:288)
  	at oracle.odi.ui.framework.event.OdiActionListener.actionPerformed(OdiActionListener.java:69)
  	at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
  	in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2319)
  	at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
  	at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
  	at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
  	at java.awt.Component.processMouseEvent(Component.java:6288)
  	at javax.swing.JComponent.processMouseEvent(JComponent.java:3268)
  	at java.awt.Component.processEvent(Component.java:6053)
  	at java.awt.Container.processEvent(Container.java:2042)
  	at java.awt.Component.dispatchEventImpl(Component.java:4651)

  Do you use the same pattern to the work of master repositories &?

  If Yes, then you must change password in connection to the repository to work as well...

  Connect only to the master repository in ODI Studio.

  Go to the topology-> Repostiories-> repositories of work. Double-click repository work on you

  

  New window pop up on the right side. Click the card to change the password at reference work

  

• After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK.

  After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK. So I can't start the program.

  Hello Siegmud,

  Wende Dich wie oben und some showers a cat den, denn

  Problembehebung für die Aktivierung und Deaktivierung > Stellen Sie sicher, dass eine zum includes Internet connection > werden (auch) displaying Fehler, wenn Ihr Computer nicht mit dem Internet ist clear (breast kann, dass) oder wenn er nicht vom Aktivierungsserver erkannt wird. Wenn are sich um einen Fehler im accordingly mit dem Aktivierungsserver all, set Sie sich mit each in connection. Halten Sie your Seriennummer bzw. Adobe-ID bereit.

  Hans-Günter

• Cisco ASA 5515 - Anyconnect users can connect to ASA, but cannot ping inside the local IP address

  Hello!

  I have a 5515 ASA with the configuration below. I have configure the ASA as remote access with anyconnect VPN server, now my problem is that I can connect but I can not ping.

  ASA Version 9.1 (1)

  !

  ASA host name

  domain xxx.xx

  names of

  local pool VPN_CLIENT_POOL 192.168.12.1 - 192.168.12.254 255.255.255.0 IP mask

  !

  interface GigabitEthernet0/0

  nameif inside

  security-level 100

  192.168.11.1 IP address 255.255.255.0

  !

  interface GigabitEthernet0/1

  Description Interface_to_VPN

  nameif outside

  security-level 0

  IP 111.222.333.444 255.255.255.240

  !

  interface GigabitEthernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/4

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/5

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  management only

  nameif management

  security-level 100

  192.168.5.1 IP address 255.255.255.0

  !

  passive FTP mode

  DNS server-group DefaultDNS

  www.ww domain name

  permit same-security-traffic intra-interface

  the object of the LAN network

  subnet 192.168.11.0 255.255.255.0

  LAN description

  network of the SSLVPN_POOL object

  255.255.255.0 subnet 192.168.12.0

  VPN_CLIENT_ACL list standard access allowed 192.168.11.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  management of MTU 1500

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 711.bin

  don't allow no asdm history

  ARP timeout 14400

  no permit-nonconnected arp

  NAT (exterior, Interior) static source SSLVPN_POOL SSLVPN_POOL static destination LAN LAN

  Route outside 0.0.0.0 0.0.0.0 111.222.333.443 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  WebVPN

  list of URLS no

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  AAA authentication http LOCAL console

  LOCAL AAA authorization exec

  Enable http server

  http 192.168.5.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec pmtu aging infinite - the security association

  Crypto ca trustpoint ASDM_TrustPoint5

  Terminal registration

  E-mail [email protected] / * /

  name of the object CN = ASA

  address-IP 111.222.333.444

  Configure CRL

  Crypto ca trustpoint ASDM_TrustPoint6

  Terminal registration

  domain name full vpn.domain.com

  E-mail [email protected] / * /

  name of the object CN = vpn.domain.com

  address-IP 111.222.333.444

  pair of keys sslvpn

  Configure CRL

  trustpool crypto ca policy

  string encryption ca ASDM_TrustPoint6 certificates

  Telnet timeout 5

  SSH 192.168.11.0 255.255.255.0 inside

  SSH timeout 30

  Console timeout 0

  No ipv6-vpn-addr-assign aaa

  no local ipv6-vpn-addr-assign

  192.168.5.2 management - dhcpd addresses 192.168.5.254

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL-trust outside ASDM_TrustPoint6 point

  WebVPN

  allow outside

  CSD image disk0:/csd_3.5.2008-k9.pkg

  AnyConnect image disk0:/anyconnect-win-3.1.04066-k9.pkg 1

  AnyConnect enable

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client

  internal VPN_CLIENT_POLICY group policy

  VPN_CLIENT_POLICY group policy attributes

  WINS server no

  value of server DNS 192.168.11.198

  VPN - 5 concurrent connections

  VPN-session-timeout 480

  client ssl-VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list VPN_CLIENT_ACL

  myComp.local value by default-field

  the address value VPN_CLIENT_POOL pools

  WebVPN

  activate AnyConnect ssl dtls

  AnyConnect Dungeon-Installer installed

  AnyConnect ssl keepalive 20

  time to generate a new key 30 AnyConnect ssl

  AnyConnect ssl generate a new method ssl key

  AnyConnect client of dpd-interval 30

  dpd-interval gateway AnyConnect 30

  AnyConnect dtls lzs compression

  AnyConnect modules value vpngina

  value of customization DfltCustomization

  internal IT_POLICY group policy

  IT_POLICY group policy attributes

  WINS server no

  value of server DNS 192.168.11.198

  VPN - connections 3

  VPN-session-timeout 120

  Protocol-tunnel-VPN-client ssl clientless ssl

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list VPN_CLIENT_ACL

  field default value societe.com

  the address value VPN_CLIENT_POOL pools

  WebVPN

  activate AnyConnect ssl dtls

  AnyConnect Dungeon-Installer installed

  AnyConnect ssl keepalive 20

  AnyConnect dtls lzs compression

  value of customization DfltCustomization

  username vpnuser password PA$ encrypted $WORD

  vpnuser username attributes

  VPN-group-policy VPN_CLIENT_POLICY

  type of remote access service

  Username vpnuser2 password PA$ encrypted $W

  username vpnuser2 attributes

  type of remote access service

  username admin password ADMINPA$ $ encrypted privilege 15

  VPN Tunnel-group type remote access

  General-attributes of VPN Tunnel-group

  address VPN_CLIENT_POOL pool

  Group Policy - by default-VPN_CLIENT_POLICY

  VPN Tunnel-group webvpn-attributes

  the aaa authentication certificate

  enable VPN_to_R group-alias

  type tunnel-group IT_PROFILE remote access

  attributes global-tunnel-group IT_PROFILE

  address VPN_CLIENT_POOL pool

  Group Policy - by default-IT_POLICY

  tunnel-group IT_PROFILE webvpn-attributes

  the aaa authentication certificate

  enable IT Group-alias

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  inspect the icmp

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  : end

  Help me please! Thank you!

  Hello

  Please set ACLs to allow ICMP between these two subnets (192.168.11.0 and 192.168.12.0) and check. It should ping. Let me know if it does not work.

  Thank you

  swap