administator/vista

Similar Questions

• Vista-stop my password account administer expired

  How can I stop my password account administration to expire. I'm using vista Home premium.

  How can I stop my password account administration to expire. I'm using vista Home premium.

  Take a look at this tutorial

  Expiration of password in Vista

  http://www.Vistax64.com/tutorials/96092-password-expiration-Vista.html

• Service Pack 1 for vista.

  I have a Vista 32 bit operating system. I recently purchased Microsoft Office 2010 and tried to install it. It showed an error that you need Service pack 1. So I tried to use Windows Update, but it showed an error in installation. Then I tried manually to install service pack 1, but it always shows an error. Help, please. I'M DESPERATE.

  Administer a shot:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my task manager on windows vista family premium does not show the tabs before and used to work properly.

  my task manager on windows vista family premium does not show the tabs it used to, when I used to open the Task Manager it would be things like 'process' 'services' 'preformance' ect. in the tabs. but now when I open it it shows just a window that has two columns, one labeled task, and other labeled status. It shows what im running, but there any options at all as the winger treat ect. the window is not even an exit or minimize the icon as other windows are in the upper right. the only way to close it alt f4 do - what I do? Ive already tried to restart the computer, and I'm on the only account to administer it. I have a screenshot of the new manager of task here: http://i1119.photobucket.com/albums/k621/a_bakedpotato/vistataskmanagerisue.jpg

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• Get a message saying "for the administrator only' on Vista business.

  Original title: can I remove restrictions in professional Vista telling me that I am not Administator?

  Professional VISTA has been installed on the PC, even if I don't need "for adninistrator only' - limitation is disturbing. Only, I use this PC. I am the administrator. Is - it possible to do this program behave like VISTA home? Is there another solution to this problem?

  Hi Rainer Urbach,.

   
  (1) the connection accounts how many are there in the system?
  (2) what exactly are you trying to do?
  (3) remember you to make changes to the computer before the question?
   
  See the steps mentioned below and check if that helps.
   
  You can try setting the default Administrator account and check if you can solve the problem.
  a. click the Start button
   
  (b) in the Start Menu, click all programs Accessories followed
   
  (c) in the menu accessories, right click on the option from the command line .
   
  d. in the drop-down menu that appears, click on the "Run as Administrator" option
   
  e. If you have the User Account Control (UAC) enabled, you will be asked for permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
   
  f. in the command prompt window, type the command net user administrator / Active: Yes and press ENTER.
   
  g. close the elevated command prompt.
   
  h. log (in the Start Menu) and you will see your new administrator integrated next to your current account.
   
  i. click the photo icon display built-in Administrator account and connect to it.
   
  If the problem is resolved, then try to disable the default Administrator account following the order and create a new administrator account.
  NET user administrator / active: No.
   
  You can try to create a new administrator account by following the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile   
   
  Hope this information is useful.

• How to activate built in Administrator in Windows Vista

  Original title: no administrator account

  Rather than create a second account in my name, I've changed my Administator account in Standard user type (bad move I know not now). Obviously, when I'm trying to make changes, I am prompted for an administrator password (that I had not applied to my original administrator account). It is not on the area to these guests to type a password even if I had a. Help!

  Hello

  I suggest you to go through the steps mentioned in the link and the Coachman.

  HOW to: Enable the build-in the administrator account in Windows Vista

  http://support.Microsoft.com/kb/555910

• Vista Defrag does not start

  I begin of choice of tools system Disc Defrag regularly or to administer mode get User Account Control nothings happens.  I tried my right click computer properties, tools, defragment and once again nothing. This is a new installation of Vista Edition family premium, all updates are current and all drivers are up to date. This is a new HDD and defrag was working before the window update installs. Updated driver occurred after problems to start defragmentation.

  Yes, I tried that didn't work. I've updated to Windows Vista Ultimate Edition clean installation and everything is fine. Thanks to all who had input. Pete

• Windows Mail (Vista) - duplicate emails - but the settings look right

  Hello

  I use Windows Mail Vista and more than 20 accounts are set up for a variety of areas. One of my areas has 3 addresses - everything I have Setup email in Windows Mail. All these 3 E-mail addresses share the same incoming and outgoing mail server and are administered using cPanel on a shared hosting environment. For the first two email addresses that I have set up for this area very well work (with "include this account when checking mail or synchronizing" ticked), however, when the third e-mail address has the checkbox "Include this account when checking mail or synchronizing" checked as I get a copy of my email inbox. If I uncheck the box I receive a copy (which is what I would like to receive). However, I'm afraid, to leave it off because it is a very important address and I fear he will cease to broadcast my posts if the checkbox is not clicked. When checking e-mail via cPanel account I shows that only one (not two) of the emails I get. I deleted the account in Windows Mail, then rebuilt - still the same problem occurs. I do not understand why it is product - any ideas as to why it occurs?
  Thank you!

  We see this behavior if you have two copies of the same account.  Check tools | Accounts and make sure that you have not listed twice inadvertently.  It could also be due to a problem in the database (where the tallies are stored), so try to compact and repair the database and see if that fixes the problem (see www.oehelp.com/WMUtil/).

  Steve

• I'm on windows vista and I want to disable a user account holder how to do this

  me nev and his wife linda are the two users on the computer, but I want to disable my wife linda, s account is a standard user and I am the administer user I'm on windows Vista premium edition and I would like to know how its been much thanks nev.

  Hello

  To delete an account in Vista, please follow the instructions below:

  (a) click Start

  (b) type of control panel in the start search bar, and then press ENTER.

  (c) select user accounts, select the user again accounts

  (d) click on manage user accounts

  (e) highlight the account you want to delete, then click on remove.

  (f) click OK.

• Problem restoring Vista Home premium

  I ran the restore on my gateway computer, now, I get the 65535 error whenever I try to load programs or anything. The computer is a gateway 5440th there a motherboard Intel Council Bluffs 3 GB ram 320gig HD. During the restoration, I received a message administer needed to run the system preparation tool. I booted in safe mode and ran sfc/scannow it works through the audit then pfft disappears. Any suggestion is appreciated. It is the home Prenium 32 bit version. I managed to do run chkdsk, did not help. Also at the start, it says failure of 2 programs loading, but when I click to see what they were the box disappears.

  Pat

  Hi Krozby,

  1 have. what food you tried on the computer?

  2. are you able to start Windows in normal mode?

  3. do you have security software installed on the computer?

  4. do you get the error in safe mode?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If you are able to start windows in normal mode then I would suggest that you run the SFC scan and check if it works.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Network drivers no longer will charge after upgrade to Vista Home Premium sp2.

  On a laptop Sony PCG - 7113 L VGN-NR220E, that is running Windows Vista Home Premium sp1, I tried to upgrade to sp2 who said he could not make the transfer and restarted, tried once more and then restored sp1.  All came back as the same with the exception of all the network drivers cannot be loaded.  Here is a list of drivers who have failed.

  • ISATAP. Westell.com
  • Map Microsoft ISATAP #3
  • Teredo Tunneling Pseudo-Interface
  • Marvell Yukon 88E8039 PCI-E Fast Ethernet
  • Controller of
  • LAN0Express AS IEEE 802.11 g PCI-E fit

  I went back to the site from Sony and all the latest drivers downloaded from the site and tried to install.  Only some allowed me to do even while administering it, but even those that didn't load on reboot even if it finds the drivers.

  I tried to uninstall the drivers in Device Manager, but nothing helped.  None of the drivers loaded when you restart.  I tried disabling verification of driver and reinstall the network drivers that I downloaded from Sony site without success.  Then I tried to download a driver directly from Marvell Yukon site for its pilot, but which also failed.

  Given that this approach did not work, I tried to get sp2 to load looking for why it was not installing.  I found a patch that was supposed to help the installation in certain situations that I loaded and sp2 installation I tried again a full download on another computer, which has not the same way.  I then tried to load sp1 over himself, but he refused, saying he was already loaded.

  I tried to start off backups old session, but without success.  I wouldn't have to reinstall the operating system everywhere, especially since I don't even know if the owner of the computer has a copy of the operating system.

  It seems to be that something related to all the fuction of network that worked before you attempt the installation of sp2 and was obvious immediately after.  Is there something I can do to restore the network features without a complete reinstallation of the operating system?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Is there an update for tools RSAT on Windows Vista x 64?

  I am trying to administer remote Windows Server 2008R2 EE x 64 for a my laptop Windows Vista x 64 Failover Cluster. While trying to add a server to a cluster, I get the message:

  "This feature is only supported with Windows Server 2008, Enterprise Edition, and Datacenter Edition servers."

  I initially installed x 64 from the KB941314 download RSAT. Can someone point me to download that will update RSAT so it detects the Server 2008 R2? I searched Microsoft Download and have not found anything suitable even.

  Thank you

  http://www.Microsoft.com/windowsserver2008/en/us/community.aspx

  They will help you in Community Server 2008 at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Help for the parental control on Vista administrator account

  Computer of my son is running Vista and I set parental controls in place through the administrator account, there a nonadministrator account.

  I changed the password after that we had a few problems with the controls, and now I want to change the settings again. However, the old password allows for parental control (IE, he allows his account access websites and bypass control, etc.), but when I try to access the administrator account, it says the old password does not work. When I enter the password, account says I don't have the login procedure and kicks back me to the main screen of Vista (where I take which account to enter).

  So, I'm stuck administering the account due to a conflict in the parental control passwords. If I try to reset the password, the computer ask me a USB stick with the old password on it information. It is a step that I did not.

  Any way to disable the administrator account? Or somehow remove/reset the parental control account access restrictions that I am experiencing?

  "when I enter the parental control in the non-administrative account, the system simply ignores the password that I entered"

  I suggest you read this info below on who has access to parental controls and how it works:

  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Link above has a very good tutorial on how to set up Parental controls.

  http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

  Also, read the tutorial above and the 'Related links' tutorials to vistax64.com.

  See you soon.

  Mick Murphy - Microsoft partner

• Music from Apple on Windows Vista

  Hello

  I want to subscribe to Apple music etc, but the upgrade will not take effect, apparently due to the fact that my laptop running Windows Vista. Of course, this is not normal? How can I subscribe to the Apple's music on the Windows Vista system without being forced to invest in a costly upgrade of my operating system?

  Hello

  You cannot use Apple music on Windows vista. iTunes 12.3 or later is required for Apple music. If you want to use Apple music you need to update your operating system (computer?).

  Jim

• I'm running Thunderbird ver15 under Win Vista. Gmail considers ver15 a low security application. How updated to a version that works with Gmail?

  This worm is working great for years. Suddenly, Gmail could not accept my sign-in. I have auto day together in Thunderbird, but it won't go past worm 15. Only after that I changed the setting in Gmail to enable low security Gmail applications would allow me in my emails via Thunderbird. I could connect to Gmail via the web very well, but not via Thunderbird. Could this be a problem with Vista?

  Thank you
  Richard

  Then I tried to configure server authentication to "OAuth2" method, but this option was not available. in the drop-down list.

  "OAuth2" only works for IMAP accounts. For POP "Normal password" is required, either in "allow applications that are less safe" or authentication step 2.

  You can set if "OAuth2' for SMTP server outgoing.

  When your problem has been fixed can you mark the thread as "solved" Please?
  Thank you.