Problem restoring Vista Home premium

Similar Questions

• problem installing vista Home premium service pack 2

  I recently had a hardware crash, had to reinstall the operating system, i.e. Windows vista Home premium with service pack 1 (32-bit) who came wth the system. Later, I tried to update the operating system, but the thrown error was 'WindowsUpdate_80080005 '. I tried to download vista sp2 on microsoft site, and when I tried to install it, it threw an error mentioning as casastrophic error E_unexpected(0*8000ffff). How can I update my windows vista Home premium with Service Pack 2?

  I tried the options listed below
  • tried to update via windows update, it threw an error "WindowsUpdate_80080005."
  • tried to install it by downloading the sp2, it threw an error E_unexpected(0*8000ffff)

  Please answer

  BR
  David

  Hi, DavidDarse,

  0 x 80080005 indicates that there is a problem of access denied with the Background Intelligent Transfer Service (BITS) security descriptors.

  1. don't you make changes on the computer before the show?
  2. When you receive this error message?
  3 update you trying to do?

  Method 1: Run that fix the following:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  If the problem persists, then try to set up your computer in a clean boot state and then try to install the update to windows.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Download the file and save it to your desktop

  Close all windows and applications

  Right-click on the file and select run as administrator to run the installation process.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  WARNING: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.

  Have you tried a system restore before the second error?

  http://support.Microsoft.com/kb/2732500

  FixIt MS: 0x80000FFFF error Code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

• Strange problem with Vista Home premium configuration update

  Just bought a Toshiba Satellite Pro L300-1AI which was preloaded with Vista Home Premium.

  Clicked on configure updates on the front screen and he entered a loop that says: Configuring updates: stage 3 of 3-0% complete. Do not turn off your computer.

  Every 5 minutes or so then stops and restarts with the same message. I left on for 8 hours, so can not believe he needs for this long. Just tried to set off, but when you restart it defaults as shown above.

  Please advise... even if you can get me right back to the normal screen before

  Hello

  Try please start your computer in safe mode and restore your operating system to an earlier time (before the update). Maybe this will help.

  In the future be careful with updates. I recommend you to disable the automatic update. Just check the list with updated supply and install important and recommended only. Disable all optional updates. You don't need them.

• Complete PC Backup and restore | Vista home Premium | upgrade

  I want to create a full backup/restore of my system because 1 of my RAID volume has failed. (My computer is less than 6 months old). I was ignorant when I bought my new system Vista Home Premium won't let me create this type of backup.

  In order to get this feature that I have to upgrade to Vista Ultimate for $220? This seems a little high for a function. Also if I update can I erase on my current hard drive when you install the upgraded operating system (i.e. I have to reinstall everything anyway since the full backup/restore will not work until the new operating system is installed)?

  TIA

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Above is the link to the complete PC Backup.

  It works in business and above.

  http://www.Acronis.com/

  A preferable and less costly, alternative is Acronis True Image.

  See you soon. Mick Murphy - Microsoft partner

• How to restore vista Home premium on my new hard drive

  can someone help was to find or get your hands on vista Home premium

  Original title: my hard drive stiopped work has brought a new 1 but forgetting my disk backup hard need answers on how to put vista family premium on my new HDD have no operating system

  Hi Kingy68,

  Before solve us the problem we need more information on the issue, that you face.

  • Who is the manufacturer of the computer?
  • If the computer came with Windows Vista pre-installed or purchased separately from Windows Vista?
  • You have the Windows Vista installation disc?

  However, if you have a Windows Vista installation disc, you can insert the disc and install Windows Vista on your computer. Access the link below and follow the steps to install Windows Vista on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  If your computer comes pre-installed with Windows Vista, you must contact the manufacturer of the computer in order to send you the installation disc or help you install Windows Vista.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CASE Installation problem on vista Home premium OS

  Hi guys,.

  I am facing the CAS(OCcas11.1.0-win64.exe) Installation issue on vista Home premium OS.

  The error I see is: "Check that you have specified the username and password correctly and the user has rights"logon as service""

  can you please suggest me how to bypass it and install it in vista home premiem OS.

  Thank you

  Hello

  You have created a user for the services of short?

  If this isn't the case, you must perform the services short as a specified user for which you can control permissions.

  Follow thw below doc for this step:

  https://docs.Oracle.com/CD/E55325_01/CAs.110/PDF/CASInstallGuide.PDF

  If you use your credentials to the system for this step, or you forgot credentials, then follow the below steps.

  Open Services' of all the Programs/Run.

  Right click on short service (CASE, HTTP, Tools) and got to properties.

  There, click on "Log On" tab and change the identification information; Restart all services.

  Most likely your change of tools and Framework service credentil will solve your problem

  Kind regards

  Prateek Gupta

• Intermittent service problems. Vista Home Premium

  From automatic updates of Vista back in February/March 2009, when restart the program stalled and went into a research problem and repair mode. There was no found repairs and 'Restore' did does not solve the problem. Stopping continuously with the power button, I could finally turn it back on. Since then I had hit similar and finally re-installed the Vista operating system, twice and downloaded all updates, but the problem persists. This has happened after an automatic upgrade Vista this morning.
  Someone at - it had similar problems and were able to find a Solutione (why Cap accented E appear when I press the question mark is Buttone)
  Thanks in advance for answers
  Rancher8

  You may have some corrupted files or a virus. You have you scanned computer viruses? I suggest that you try to create a new profile to test the problem. There is a repair option it's just called a Inplace upgrade. http://support.Microsoft.com/kb/927523

  Corrupted profile test

  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Please let us know Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• My backup files are on DVD + R, but when I try to restore, Vista Home Premium States, they are not on the hard disk.

  How can I get the recognized without any instructions? Why no instructions? I was at this for hours.  Should I move them to the hard drive? Backup looks so good, but I need my files.

  Hello

  Here are the different ways to back up and restore

  and a link to the appropriate forum for the best help available for your question

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• STARTING PROBLEMS WITH VISTA HOME PREMIUM

  9 times out of 10 that my computer will not start, it gets insofar as the bar goes from left to right, then it freezes and sometimes the Startup Repair will kick once if that works very well done, which is until I turn it off Green and I have to start the same process everywhere. I created a restore point that goes well before that time that I started to get into trouble, but it always crashes on startup. any help would be appreciated.

  Try this:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with Vista Home premium SP2 update

  I downloaded the suite Microsoft Office 2007 Service Pack 2 (SP2) via Internet (site of Microsoft Windows), it took me about 4 hours to finish, he said that the installation was successful, but when I checked "view update history", he says "status: failure!

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem using Vista Home Premium disk cloning

  My laptop hard drive Asus F3F is almost full, even after compression, I bought a 500 GB WD Advanced format drive and a drive enclosure that will house him while I try to clone the drive in it. I loaded EasUs Todo backup (free) to help with cloning. When you connect the new drive appears in Device Manager under disk drives and computer under storage management, but it does NOT appear in my computer as a disk in the backup software so I am unable to make the clone. Can anyone help? (The reason for his approach is because that software op is the one that came with the laptop)

  Hello

  Thanks for posting the request in the Microsoft community forums!
  I understand that you are facing the issue with disk cloning. We'll try to get this fixed number.

  You can try the suggestions in the link and check if it helps:
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140

  If the problem persists while you can display the query in the TechNet forum.
  TechNet Forums - http://social.technet.microsoft.com/Forums/en/categories/

  If you need further assistance, please answer and we will be happy to help you.

• Garmin iQue 3600 PDA/GPS map loading problems with Vista Home Premium 64

  I can download the Garmin DVD for my hp computer but the operating system does not recognize the Ique 3600 device on the USB port.
  How can I get 64 WV to recognize and download on my Garmin?
  My Toshiba 32 bit system works well, but it takes hours to download a complete set of cards.

  Thank you;  j.Kuss

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon. Mick Murphy - Microsoft partner

• I bought a laptop HP of Costco comes with Vista Home Premium but now I have Validation Code 50. Invalid license.

  Problem with Vista Home Premium Validation

  I bought a laptop HP of Costco comes with Vista Home Premium but now I
  Validation code 50.  Invalid license.

  Validation of Windows through web just hangs.  The key of product or paper plate
  at the base of the laptop is worn out and not readable. I don't want to reformat my drive
  or reinstall my software applications.  What is the easiest solution?  The cheapest?

  There must be a mistake that is not my fault.  Is it possible to validate my particular
  laptop if I provided the results of you and MGA diagnostics validate on your side?

  Hello

  I suggest you contact HP support for assistance.

  http://WWW8.HP.com/us/en/support-drivers.html

• Vista Home Premium SP troubled - cannot install

  original title: problems of Vista Home Premium SP

  Hi, I can't install vista SP2. It is said to install SP1, which is installed. I tried to download the SP1 file and mode without failure, but when has that says already installed. When I tried the same thing with SP2 in safemode, it says please install SP1? Any help would very be received recognition. Thanks in advance.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Vista Home Premium SP1 Reboot loop infinite, inaccessible Windows restore

  Problem: Update marked Service Pack 1 (I do not know the real KB #) sent my computer in an infinite loop.  After a reboot "3 3 0% complete configuration updates / don't turn off computer" appears and the percentage continues to 100%, the system reboots and repeat.  I left the computer to update last night and now he has been yet updated this morning.

  Is trying to solve: I studied what I can on this problem.  I tried to access the system restore via the following methods:

  1. Shut down the computer, restart the Advanced Boot Options screen boot mode safe.  Result: after the appearance of the logo windows at startup, the screen returns to the screen "Update Configuration".  This is the case on 'Safe Mode', 'Safe Mode with networking' 'Last good known Configuration (Advanced)' and "Directory Services Restore Mode" I have not tried other options in the screen options start
  2. Using the recovery DVDs I've done after the installation of Vista (circa Dec. 2006): result: restore option only includes the restoration of the recovery image of boot sector with a complete HD wipe factory-installed.  Not the restoration of the system of options available.

  Plug material: I have (obviously) Vista Home Premium installed above a factory installed Windows XP Media Center (SP2).  Partition 2 contains an area of recovery that will restore the original settings.  Another partition is Ubuntu, which is how I can log in and post this message.  Also:

  • Model: Compaq Presario SR2050NX Media Center
  • Processor: Intel Pentium D 2.8 GHz dual core
  • MoBo: ESC Asteropi 3
  • Chipset: ATI RC410
  • Southbridge: ATI SB400
  • Memory: 1024 M DDR2 - SDRAM (PC2-4200/PC2-4300/533 MHz)
  • HARD DRIVE: 250 GB
  • OS: Windows Vista editions Home Premium on XP Media Center SP2
  • Secondary to OS: Ubuntu 9.04

  Computing: Average
  
  Mood: upset

  My goal is to restore the system to a point before the installation of the update.  I didn't want to wipe the system and start over.

  Thank you
  TB

  Do a repair disc to do a repair system restore / boot:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  If this does not work, now looking to relocate, because you have only the factory recovery disc.

  Mick Murphy - Microsoft partner