How to activate built in Administrator in Windows Vista
Original title: no administrator account
Rather than create a second account in my name, I've changed my Administator account in Standard user type (bad move I know not now). Obviously, when I'm trying to make changes, I am prompted for an administrator password (that I had not applied to my original administrator account). It is not on the area to these guests to type a password even if I had a. Help!
Hello
I suggest you to go through the steps mentioned in the link and the Coachman.
HOW to: Enable the build-in the administrator account in Windows Vista
http://support.Microsoft.com/kb/555910
Tags: Windows
Similar Questions
-
How to activate the handwriting recognition in Windows Vista SP2
Recently, I bought a Wacom Bamboo tablet, model CTL-460. The Tablet works in Adobe Illustrator, Corel Painter Essentials 4, it even works in Windows to scroll, double-click, etc.. The only thing I can't get to work is the handwriting recognition. I thought it may have been my version of Office, so I've recently upgraded to Office 2010 beta, but under ink tools, the only thing it allows me to use is 'Selection of objects.
I tried to change my keyboard in 'Regional and Language Options' under the keyboard 'Other', which includes "Writing Pad", "Write Anywhere" and "Drawing block", but it does not work. I try to click on 'Properties' for the three listed but I get the message error "(empty) property setting is unavailable. I also tried the Windows key + H, but it did not work. I tried all the properties of Tablet I could but nothing worked.
My computer is an IBM - Lenovo T61 Thinkpad of 2007 with a processor Intel Core 2 Duo T7100 @ 1.8 GHZ. I've recently upgraded to SP1 and SP2 to later that day here. I have installed the driver for the tablet before I upgraded to SP1, but updated the driver after the installation of SP2.
Any information on this problem would be greatly appreciated. Thank you.
Hi His_Dudliness,
Please see the article below for further troubleshooting:
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
How to activate bluetooth on power T400 - Windows Vista
Hi all
I had lost support for bluetooth switch power switch with one of the recent updates to vista (so I think). Now I have the bluetooth enabled all the time. I tried to reinstall the bluetooth software, productivity Center thinkvantage and customization for windows Mobility Center.
There is no bluetooth in Windows center mobility switch (although I remember there used one), and I don't have Bluetooth in application 'wireless power' (only wireless lan). Bluetooth works all the time (when bluetooth is activated). Also, I tried to manually turn off the bluetooth radio in the Panel, but the bluetooth remains on.
What application is used to turn on/off bluetooth radio? Should I reinstall?
Thanks a lot for all the help.
Kind regards
Hrvoje
How about Fn + F5?
If you have installed the dial-up connection, a window came up with Fn + F5 keys and
You can enable/disable Bluetooth Radio.
-
How to activate the rotation on the Windows Photo Viewer buttons?
Original title: Rotation buttons
How to activate the rotation on the Windows Photo Viewer buttons?
Do you mean that the spin button is disable as if gray/disappear?
-
How to activate the touch screen on Windows 8.
Original title: How can I activate this touch screen of toa
How can I make my computer a touch screen
Hey Cindy.
Thanks for posting your question in the Microsoft Community forums.The description of the problem, I see you want to how to activate the touch screen on Windows 8.
I've surely you will help solve this problem. Let's try a few steps that will help you solve the problem.
If the computer has the features for touch screen computer and you want to enable you can try the procedure described in the article and check.
a. press on the key Windows + Q.b. type Control Panel.
c. go to the Sound and material.
d. click on Pen and touch.
e. click the contact tab .
f. Enabthe use your finger as an input.For more information, please see the link.
Contact: call, tap and beyond
http://Windows.Microsoft.com/en-in/Windows-8/touch-swipe-tap-beyondHope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence. -
How I validete my product key for windows vista
How I validete my product key for windows vista
"yiyoelbobo" wrote in message News: ae18d6ea-119f - a 49-0 - 80 d 4-921c9d8075a5...How I validete my product key for windows vista
Did you mean Validate or activate?If enable, then use the link in the menu programsIf Validate - go here: http://www.microsoft.com/genuine/validate
--Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers
-
How to remove the printer driver under windows Vista software
How to remove the printer driver under windows Vista
Hello
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems--------------
If you have an error spooler or service use these methods to make them disappear including having to re - install
the same printer if you intend to remove it.Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How to make a backup of my Windows Vista?
Hello.
Windows Vista has been installed on my Toshiba laptop when I bought it.
How to make a backup of my Windows Vista and I need to?
Can I do a backup on a CD, or how?
I think I have to need if I get a virus and you need to remove and install from the beginning.
Thanks by
Hello
I think that it s a good idea to make a backup on your laptop.
You have created the Toshiba recovery disks? When you bought a Toshiba laptop, you must create these disks. If you have a virus or something else with these discs, you can get the factory settings on your laptop.
You can create discs with the Toshiba recovery disc creator and if you didn t again, you get the following message:
> Important INFORMATION
>
> your system is equipped with a hard drive recovery system. If you need to repair
> your computer in the restaurant to original factory State, you can do it directly
> drive hard (press F8 when you start your computer, choose "Repair your computer"
(> and follow the instructions in the menu) or create a media drive bootable recovery for this purpose.
>
> Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the
> Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer
> is seriously damagedSo create one and if you need, you can get factory settings with Windows, drivers and tools in minutes.
If you want to make a backup of your laptop with all the software that was installed by you, you must use programs such as Acronis True Image backup.
Bye!
-
How to fix error code 643 in windows vista
How fix the error code 643 for windows vista when you try to install the updates.
See if this sugesstion can help you:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >
-
How do I PERMANENTLY remove games in Windows Vista (not just disable)
How do PERMANENTLY uninstall you games in Windows Vista? I can do under XP, but can not find instx for Vista. I don't know how to disable the games, I want that they UNINSTALLED permanently. Thank you.
LStewart,
Here are instructions on how to remove programs. And here are instructions on how to remove (or deactivate) the default Windows games. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
How can you write a resume using windows Vista Home Basic?
How can I write a resume using windows Vista Home Basic? I put t have microsoft word or office.
Start menu -All Programs - Accessories - Wordpad.
-
Where is Snipping Tool? If deleted accidentally, how can I get a copy for Windows Vista?
Hello Bob w. NY
Click on the Start button and type capture in the search box menu star. The cutting tool application should appear at the top of the search results.
As the cutting tool is an integral part of Windows, you might have to reinstall windows to return to the tool. Assuming, of course, you had accidentally deleted.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
critical stop as stop, and so on, how do I get it back? Windows Vista.
Hello
1. don't you make changes to the computer until the problem occurred?
Method 1: try to scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.
http://support.Microsoft.com/kb/929833
Method 2:
Also try to scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
For your reference: Change the sounds of the computer: http://windows.microsoft.com/en-US/windows-vista/Change-computer-sounds
Hope this information is useful.
-
problems with wireless Vista "local only".
How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?Hello
Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer. Since he does not have details of the database of network devices, communicate with him.
- You are able to access the Internet?
Try the steps mentioned below and check:
Method 1:
Step 1: Enable or disable a network adapter and then check:
http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter
Step 2: Run Network Diagnostic tool and check:
Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Method 2: Wi - Fi and in Windows network connection issues:
Reference links:
Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041
Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx
Hope it works.
-
How can I remove Blinx drive of Windows Vista?
HOW CAN I REMOVE BLINX PLAYER OF WINDOWS VISTA?
Hi Briano,
To my knowledge, it is a program and not a malicious software - so the following should do the trick (no problems of malware as far as I can tell - but if the following does not work, only after back with how you know there's always and we'll see what we can do.)
What I've read, the process should be as remove any program http://www.ehow.com/how_7347305_remove-blinkx.html; However, just to be safe, we will use a method that tends to work better in almost all cases. Download and install Revo: http://www.revouninstaller.com/revo_uninstaller_free_download.html (the free version) and use it in advanced mode to uninstall and completely remove Blinx. Once completed, restart and Olivier Bonnet should be gone for good.
I hope this helps.
Good luck!
Maybe you are looking for
-
When I send to myself, the data messages sent both folders Inbox.Sometimes as Content-Type: x-store-info & several other x-Details: In-Reply-To: Return-Path:Maybe it's a virus that has fully updated AVG Free scan maximum does not detect.
-
I have a problem on my screen of launchpad. Desktop screen interfered with launchpad screen as attached photo. Please help me solve this problem
-
Firefox does not start when DYLD_FALLBACK_LIBRARY_PATH in launchd.conf
I need to configure DYLD_FALLBACK_LIBRARY_PATH for another application but when I do this Firefox launch more correctly... empty shell resembling Firefox opens. (Located in launchd.conf and requires a reboot) An easy test is to use the Terminal and s
-
Wireless receiver 3.1 Desktop device driver
Hi all You just bought a Microsoft Wireless Laser Desktop 3000. I installed the software that came with it. However, my Windows XP Pro SP3 computer not recognize the receiver. He keeps trying to install a device driver. I looked in Device Manager
-
Sticker Decal for Windows Vista
It is a non software related question completely, but I think I would have more luck here as relations with Microsoft e-mail clients. In fact, I don't know how to do for Microsoft REACH customer relationships. :) Anyone know how I can get an extra