Administrator of the repair disc menu password recovery

Similar Questions

• in the window Live Messenger password recovery

  How to recover the password stolen

  If the password is always the same, turn it on.

  If not, go through the option 'forgot my password'.

  If this does not work, try to recover your account: http://windowslivehelp.com/solution.aspx?solutionid=6ea0c7b3-1473-4176-b03f-145b951dcb41

• Impossible to disassemble the repair disc

  Hey out there - I hope someone can help me with a solution to my problem!

  My drive external DRIVE (WD MY Passport) decide to stop playing on the same team earlier today.

  My Mac recognizes the drive, but won't let me access to his files directory - when you try to check the diskutil drive tells me it needs to be repaired, and in trying to fix it, diskutil says that it is impossible to disassemble the disc... > _ <

  But when accessing the control through the recovery partition I can also check and repair and it will come just by saying "all is * A - OK... When you use the diskutil through the recovery partition I can even access to its files directory, and it shows me all the files without any problems...

  If it becomes increasingly strange...

  Y at - there someone out there who has an idea of what to do with it?

  Best regards

  Stop your Mac. Now start with the SHIFT key is pressed. This will start in Safe Mode, with all extensions turned off. Safe mode is slow to start, so give it time, it checks a lot of staff. If it works fine in Safe Mode, restart normally. If it works now, you are finished.

  If the problem comes back after a reboot, you have an extension conflict. Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find the bad Apple.

• the Mini 110 bios password recovery

  Hi, I need a password for my mini 110 1030nr. Error code cnu9246cpq. Can someone help me please. Thank you

  Hello

  Please be aware that this is not supported by HP and try your hand at your own risk.

  Try to enter: e9lo7vge25 (to be noted that the 3rd character is a lowercase L)

  Kind regards

  DP - K

• SG300 how the cli password recovery

  Hello

  We want to change the password of our switch, but we don't know. We can gain physical access to the console, but he asked to the user and the password?

  We read that you can launch the start menu password recovery service. But, how can we get the boot without the password menu?

  Best regards

  Hello

  In order to reset the password in the start menu, you need to interrupt the boot of the switch process.  Console in and power cycle the switch, you should see the Cisco logo, then you have about two seconds press a key to get the boot menu.  If you miss it (or it expires once your inside) power cycle just the switch again to bring it up again.  The switch in front of me, it is option 3 to reset the password.

  However, it is possible to disabled this option, so if it is not available in the start menu the only way to restore access to the switch will be factory default by pressing the button, rest for 30 seconds.  Then you will need to reconfigure the device, but the default cisco/cisco connection you will get once the switch resets.

  Thanks for choosing Cisco,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• ZIP RAR ACE password recovery program

  I found the ZIP RAR ACE password recovery program on my computer. Is it safe? Do I need?

  Hello

  ZIP RAR ACE Password Recovery is a program to recover passwords lost or forgotten files of the following types: ZIP, RAR (including v3.x, v4.x SFX, a work in several volumes and archives with encrypted filenames) and ACE archives.

  If you have installed a publicly traded software then ZIP RAR ACE can help you recover the forgotten password.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Remove the configuration and reset password on A9K - RSP - 4 G

  We have completed the TURBOBOOT and updated version of the image, but we have to eliminate all the prior configuration and password.

  What is the procedure for that?

  Hello

  Xander and I have implemented this document presenting the different methods of password recovery.

  https://supportforums.Cisco.com/docs/doc-15870

  Let me know if that covers what you need.

  Thank you

  Sam

• Reinstall Windows 7 repair disc?

  My Dell had a Windows Vista operating system. I installed Windows 7 as an upgrade. BOT Family Pack and send the original to our son who lives across the country. The hard drive crashed and Dell it replaced under warranty but would only replace the Vista operating system. How to replace the Windows 7 operating system if I have the disk repair and product key? I put the repair disc in the CD drawer, but it did nothing.   Can I hit F12 and then simply click "Boot to a CD? Will be re - install the OS?

  Download a copy of Windows 7 Home Premium, burn it to a blank disc and use your product key to reinstall:
  Windows 7 Edition Home Premium x 64 (64-bit)

  English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

• error after I did the administrator password recovery disk

  I forgot the password of administrator, made the recovery disc, after the new password twice and add the indicator, click Next, an error occurs and cannot continue

  A password reset disk must be the last password reset disk that was created prior to this account on this PC & this OS.

  It is possible that you get an error because you use the password that has been done for another account reset disk or because the password reset disk that you use is not the last being made for this account [new reset disk of password that make you disabled all previous password reset disks].

• The BIOS administrator password recovery

  I have a Compaq Mini CQ10-400 s/n CNC02648QX. My son has put both a boot password, we've been able to guess AND a second password necessary to access the settings of the BIOS itself that is lost.

  After 3 attempts, we get the error "system disabled 75582004.

  From what I've read in the forums, the error code is a human readable a master password hash. So I don't think all of the "e9". "passwords that I found posted on this forum already at work. (and they do not have)

  Can someone please send the password that I have to enter the BIOS and remove passwords my son put and point me to a tool that I can use to perform the decryption myself later if necessary?

  Hello:

  Reboot and try the code:

  60480020

  Google clear the BIOS password and there are several sites of your choice.

• Lost administrative password recovery options

  About once a day, I see the same post

  "I lost my administrative password for my computer"

  "I don't remember my password"

  "I need to change the password and I don't remember"

  Without failure, we put the passwords and forget about them and it is not always a simple process to remedy this solution. However, it is a simple process and can easily be avoided. If you read this thread and you have not lost your password to take measures now to protect yourself in case this happens. It will save you time and effort. Always remember, act now to save time tomorrow.

  Retrieve the password using a password reset disk

  This should be your preferred method to reset your password as this is something that you can do and need to do when you settle your account with a password. The password recovery CD must be created before you lost the password to be effective. If you have not already created it and you read this thread to be upward and out with what to do if you are having this issue right now stop and go create this disc.

  Instructions available here

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-disk

  Now, if you have the drive and you have lost your password it is very simple.

  1 start the computer and try to enter the password on the Windows login screen

  2. the password is incorrect message opens, and from there, you can select ok

  3. once the screen goes away, a new screen appears with an option to reset the password.

  4. follow the instructions on the screen and use the password reset disk to reset your password

  Change your password to a different user account

  If you have multiple user accounts, and at least one of these other accounts have administrator rights, then you can reset your password from the other account. The password of this account may be necessary, then you can check with the owner of the account.

  1. connect to the other account has administrator rights

  2. click the start ORB, then select the Control Panel

  3. from here, select the accounts of users and parental control

  4. Select Manage another account

  5. click on the account with the forgotten password

  6. click on change password

  7. type a new password and press on enter to confirm

  8. click on change password

  9 disconnect you, then try to log on to the original account

  Return to a previous password

  If you have recently changed your password and now can't remember, you can use the application of Microsoft System Restore to return to a time before you changed the password. This would of course imply remind you which has been the case the previous password.

  To go back and use your old password follow these steps:

  1. press on the F11 key repeatedly to open the HP System Recovery program on the system startup

  2. under, I need help immediately, click the Microsoft System Restore option

  3. follow the instructions to restore the computer to a previous state, choose a time before you changed the password.

  Use a third-party program to attempt to reset / recover password

  HP, like most other companies, do not support the use of third-party applications, but they do exist. If you cannot use one of the options mentioned previous then this is may be the option you want to try.

  Removal and recovery of password programs exist and can be found on the internet through various searches on google.

  One of these programs can be found here http://www.pcloginnow.com/ with instructions on how to use it here http://www.pcloginnow.com/guide.html

  Remember that HP mentioned earlier does not support the use of third-party software to retrieve lost passwords, and then you use this tool or any other tool at your own risk.

  Hope this helps you recover your lost password, or you read and warning and make a recovery for you disk protect.

• used sytem repair from the installation disc difficult or too complicated?

  do you know if the repair system hard to use from reinstalling vista irunning disk?  without any reason after windows drivres dell download does not start, it is just there to take all this time and if I'm lucky it will start, I used the configuration of the system, and that did not help. I know, it seems that he is sssoooo nearly all set to start at the same time, but in the system and the process where it lists everything that I don't know what is what, so I can't stop the useless stuff to start, I thing I have too many things that either doesn't work - I don't have not even half uninstalled or put in the easy computer were and if it's the dell drivers , screwing, then why vista does not work?

  Dell has a touch screen F12 on boot options, but vista says to put in disk, press on restart and then repair, but what happens if I can't do it at the start or the dvd - rom does not start when I reboot?

  and if it doesn't it's really complicated? I ran disk cleanup and repair. I ran to check memory, I had 140 GB free out of 240 GB, I ran two restorations system back to dates before I installed the drivers from dell, everything worked fine until last night, now dell takes to always to get to the windows startup takes part and windows to start even in safe mode.

  I ran all the controls sytem dell pc and everything passes .so should I put the disc and hit restart? and should I first go to where he gives the choice to load some stuff or normally loads at startup, and which one should I use all or just selective to go until I reboot. Thanks for any help you can offer, because it runs now I don't even want to turn it off.

  Which

  Hello

  You receive an error message?
  
  Method 1:
  You must restart your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows installation disc, you can follow the procedure:

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart.

  d. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  e. Select your language settings and then click Next.

  f. click on repair your computer.

  g. Select the operating system you want to repair, and then click Next.

  h. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

  WARNING OF THE BIOS:
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Method 2:
  You can see startup Repair in Windows Vista, which is a recovery tool that can fix certain problems. You can check the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3:
  You can check the event viewer for related event logs.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  What are the information in event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can also see the links provided to learn more:
  http://support.Microsoft.com/mats/slow_windows_performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

• When you try to use the repair your computer from the advanced boot option option, it only shows a different user account and my username and password does not work

  Original title: when you try to use the repair your computer from the advanced boot option option

  When you try to use the repair your computer from the menu option options advanced startup, when it comes to the screen to select the user account it shows only a "another" user account and my username and password does not work, and the 'OTHER' this account is not on my list of user accounts... what should I do?

  Hi kennympeek,

  1. why you try to do the Startup Repair?

  You can try to perform the commissioning of repair using the audit and the disk Installation of Windows Vista.

  For estelle information links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

• When windows asks me to isnert a password recovery disk, it does not offer the possibility to create one in the D drive, where I have a DVD. Why?

  I have a new Dell XPS with Windows 7 Home computer. I want to create a password recovery disk. I have (1) check my CD/DVD drive works (2), I watched the video on how to create a password reset disk (3) I did the procedure successfully in the past on other computers (4) I rebooted the computer after having difficulty finding the opportunity to insert a disk in drive D, the name of the drive for my DVD / CD player. What is the problem?

  The problem is that when I am asked to insert a disc in the player I'd give myself a choice is not drive D, the name of the drive to my CD/DVD drive.
  So over and over again once I wonder to insert the disc. I also have one of these drives you can put 4 holders memory size different from the type used in cameras and I have a DVD player, it is called D drive.  Why I'm not given the option to use drive D when I'm given a choice I can insert a disc so that the password recovery disk can be created?

  Change the assignment of drive letter for the dvd player to one letter other than.

  1. sign the computer as an administrator.

  2. Insert a disk in the removable drive.

  3. type computer management in the start search box and press ENTER.

  4. click on disk management.

  5 right-click the partition, logical drive or volume that you want to change and then clickchange drive letter and paths.

  6. click on the removable drive, click it, clickchange, click the drive letter that you want to use, and then clickOK.

• System was a dell, but everything has been changed. Should recovery/repair disc what I do?

  Original title: I need to run recovery on my xp

  I need to run a recovery/repair on my family computer for my windows xp cd, but all I can find is a for a dell xp home recovery disk. My computer was originally from dell, but we changed rooms (motherboard, CPU, ram, video card, etc.) and told me that now I can't launch an inside dell recovery disk. Is this correct? If so should what type of recovery/repair disc I do?

  That is right. The Dell recovery disk will work only on the original Dell equipment.  You will need to purchase a retail license, either a generic OEM license without brand that has never been used.