Administrator settings prevent me to see and access to documents or files.

Similar Questions

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How can I change my settings so I can see a glimpse of my PDF files in my folder?

  How can I change my settings so that I can see a preview of my PDF files in my files?

  Hi Anna,.

  With DC preview thumbnails is no longer available.

  Thank you

  Abhishek

• Hotmail 44 looks like your mother has not finished to set up parental controls for your account settings. Click "Access the parental control settings" to complete the process and access your account.

  I love how you get this error message, and then says that there is no support for this information.  You would think that if MS wrote this error message, they would assume someone would finally get it and need help.  Why I've bothered with this company I have no idea.

  All I want is to get my child HM account work. Ive clicked all this parental control I can find.  If this was the issue of the xbox, Id go immediately to gmail.

  Hello

  Had the same problem as the rest. All fixed now by:

  Abducted child security account for the family (Instructions in this thread)

  Account and went to outlook.com, let the updates.

  deleted the account from the local computer (Windows 8, users through the control panel * no * new user interface)

  Added and ensure that parental control is back on (it is by default)

  Can access the messages and followed the account. The account I had was old enough and not yet been used.

• It seems that your mother has finished setting up parental control for your account settings. Click "Access the parental control settings" to complete the process and access your account.

  My case is exactly like G - Boy below:

  I had no problems with the installation, but I found myself with the same result... my daughter cannot connect to hotmail that she gets the same error as you indicate above.

  However, I must mention that
  1. I set up both of my two daughters and you can access Hotmail and the other can't.  The same process followed
  2. one who can't access Hotmail, she can always use Instant Messanger

  Your help is appreciated since Windows Live family safety support staff was not able to help and directed me to this forum.

  Thank you.

  NOTE: Response by F. Avon did not help me at all.

  Hi Phuoc Nguyen,

  Thank you for visiting the community of responses for Windows.

  The question you have posted is bound using Windows Live (hotmail) and would be better suited in theCenter to help Windows Live Hotmail andWindows Live Help Solution Center for Messenger (rather than the support of parental controls that you have been achieved). Visit the links above to find a community that will provide the support you want.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SuperFetch advanced settings? Choice of Apps and it puts in cache files?

  I had problems with SuperFetch since the first installation of Vista about 12 months ago. It becomes unbearable and very irritating.

  I got about 350 GB of MP3 files that SuperFetch plunges in every so often, fundamentally causing my machine becoming unusable for 2 to 6 hours. What happens around 2 - 5 times a week! Generally stopping the service stopped responding, even though from time to time it seems to ignore the stop and continues stolen my drive.

  He also likes a good rumage autour in my Outlook PSTs (also quite large).

  That being said, I'm half-guess that's what he does, it certainly seems to be the case to look at the reliability and the Performance Manager and research on it.

  There is no model to its activity, I leave my machine on constantly hoping that he will do everything he is too busy and caching of the day to the next so I can work without interruption all day working. Although this seems to have little impact, all of a sudden, he started too asked my drive and becomes unusable at random and usually when I have something important to do. Like today at 13:13. THRASH THRASH... slowwwww machine.

  Is there a parameter to exclude certain files and applications to be SuperFetched? I could then exclude Outlook, iTunes, MP3 / AAC and enjoy a beautiful machine running smooth open commonly used applications such as Photoshop and Fireworks quickly.

  The random rampage you describe is Windows most likely to make the system restore backups. There is a simple way to get around, just that resize the maximum storage for backups, and it will take 1-3 minutes to do what really isn't a big deal.

  run: "cmd".

  type for laptop:
  vssadmin resize shadowstorage / For = C: / On = C: / MaxSize = 1024 MB

  for desktop PC:
  vssadmin resize shadowstorage / For = C: / On = C: / MaxSize = 2048 MB

  Any size, the less time the rampage takes BUT you will have less points of restoration in case something goes wrong, 2048 MB I can usually return 3 days at least with activity heavy installation.

  You can check if this is your problem by analyzing the files read / written at the time of the rampage, there should be access \$System Volume Information.

• I can't see or access my saved PDF files (or icons) in my files or on my desktop of 64-bit windows 7 (catalyst control problem?).

  The only time where I can see them is when I'm about to save an another PDF to a file or to the desktop during 'save process' in which it contains some saved PDF files.

  I tried 'show desktop' and opening adobe reader to see the files or icons, but they will not show.

  I have a new HP computer with windows 7 64-bit and windows has failed twice. Time just after the new facility, just before I was able to create the rescue and then disk after two weeks of use; telling me to re - install! Now, months later, I have Catalyst Control Center errors / problems. So I don't know if it's all the partners. Should I reinstall windows and hope my rescue disc work?

  Maybe I should have asked "how to get a free replacement for a windows 7 lemon?

  Hello

  ·         Since when you are facing this problem?

  ·         Did you change your computer before this problem?

  Method 1:

   

  I suggest you to search for the problem in safe mode and see if it persists.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2:

  I suggest to change the save location and check if it helps.

  Method 3:

  I suggest you run Chkdsk and see if it works.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: Make sure that you take a backup of your data before performing the check disk on your computer.

  Method 4:

  I also suggest you to check user account again and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

• access denied to installed files.

  I installed a game and some video card drivers and it gives that I have no right to use these programs or folders. I have admin rights and tried to access with my mothers acc who has admin rights too but still the same.it happens to all programs etc when I install in C:. He once said that I do not own this object. When I take possession until he and page protection there these groups in it. rights of the owner, system and msiserver. one of these has no right on these files.

  Hi Arto90,

  Try these steps and check the result.
  Step 1: Create a system restore point
  a. see the point of creating a restore

  Note: You can always return to a previous state by selecting the restore point.

  Step 2: Check if the administrators have full control on C:
  a. Click Start, click computer.
  b. right-click on C:, and then click Properties.
  c. click on the Security tab, select Administrators under "Groups and usernames" and check if they have total control.

  Step 3: Try to run the program as administrator
  a. Locate the launch of the program, right click on the file and click Properties.
  b. click on the Compatibility tab and place a check on "Run this program as Administrator" under "privilege level".
  c. click ok to apply the changes.
  d. check if the problem persists.

  See Troubleshoot "access denied" when opening files or folders

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Refuse access to documents and settings to Windows 7 Administrator

  Full installation of Windows 7 from MS was purchased in 2010 (now beyond the time of MS support) on a brand new computer. User account unique (me) with full administrator rights and access (so I thought). Last week for the 1st time, I had access to the Documents & settings. Surprise! Folder is locked and denies me access, no matter what I do with all the settings. "You don't have access to this folder", and he denies me, the administrator, the rights to make the changes.  Since I was a year + applications and files installed on this thing, I shudder to anticipate a reinstallation of the system address. Any ideas on how to unlock this file?  There may be others that I don't have reason to still access, but it's one important right now.  NOTE: I'm an experienced user, but NOT a geek, so a large part of the jargon 'inside baseball' is over my head, but I'm uncomfortable procedures, even in the registry (very clear instructions please). I'd appreciate any help that anyone is kind enough to offer.

  In Windows 7, "Documents & settings" are not a real folder but a point of redirection for poorly designed applications.

  Your files are in C:\Users\YourUserName\

• Page rotation script does not (not allowed error security settings prevent access to this property)

  Hello

  I use a script to rotate each pages in pdf format by clicking on a button. I added a script to rotate the file in the click event of the button turn as a javascript. It works in acrobat, but not in adobe reader. Please see the script

  Start = 0;

  nEnd = this.numPages - 1;

  nRotate = 90;
  Try
  {
  If (this.numPages > 0)
  {
  this.setPageRotations (start, nEnd, nRotate)
  }
  }
  catch (e)
  {
  App.Alert ("processing error:" + e)
  }

  But I get this error in adobe reader not in acrobat. "not authorized error security settings prevent access to this property or method". What is the problem. Please someone tell me.

  OK, so here's what you do:

  -Create a new file in a plain-text editor (I recommend Notepad ++) and paste this code:

  safeExecMenuItem = {app.trustPropagatorFunction (function (code)}

  app.beginPriv ();

  app.execMenuItem (code);

  app.endPriv ();

  });

  mySafeExecMenuItem = {app.trustedFunction (function (code)}

  app.beginPriv ();

  safeExecMenuItem (code);

  app.endPriv ();

  });

  Close the player if it was open and then save this file as "MyScripts.js" and place it in the following directory (this is for Windows):

  C:\Program Files (x 86) \Adobe\Reader 11.0\Reader\Javascripts

  If you want it to run as well in format Acrobat place the file also less:

  C:\Program Files (x 86) \Adobe\Acrobat 11.0\Acrobat\Javascripts

  Now to rotate the page clockwise attach this code to your button (in Acrobat, of course):

  mySafeExecMenuItem ("RotateCW");

  And to turn them counterclockwise, use this code:

  mySafeExecMenuItem ("RotateCCW");

  Open your file in the player and the buttons should turn pages when you click on it...

• Need to access the 'Documents and Settings' folder in Windows 7

  I am importing an ArcMAP GIS project to my new Windows 7 computer (the project was launched on Windows XP).  Because the files in this project were initially located in the subdirectories of the "Documents and Settings" folder, map search these files in this folder.  So, I need to access this folder if I put the files in the location that arcmap is expected to make them, or that I inform manually map the new location, one at a time, hundreds and hundreds of files.  Is there a way I can access the "Documents and Settings" folder to add new subdirectories and files in it?  After some research, I found the folder, but I said that I don't have authority (even as an administrator) to access and modify the content of the folder.  Thank you

  I am importing an ArcMAP GIS project to my new Windows 7 computer (the project was launched on Windows XP).  Because the files in this project were initially located in the subdirectories of the "Documents and Settings" folder, map search these files in this folder.  So, I need to access this folder if I put the files in the location that arcmap is expected to make them, or that I inform manually map the new location, one at a time, hundreds and hundreds of files.  Is there a way I can access the "Documents and Settings" folder to add new subdirectories and files in it?  After some research, I found the folder, but I said that I don't have authority (even as an administrator) to access and modify the content of the folder.  Thank you

  Hey ITromble

  read the below information about junction points even through it was written on vista

  http://www.Svrops.com/Svrops/articles/jpoints.htm

  Old path	New path
  \Documents and Settings	\Users

  Here is the vista forums

  link below is in Forum windows 7

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Walter, the time zone traveller

• I see an 'unknown' and 'access denied' message on the Internet icon.

  Original title: status of Internet on my other computer is 'unknown' and 'access denied', but seems to work very well

  my internet on my other computer status is 'unknown' and 'access denied', but internet work well on this computer? (and others)

  and no internet icon in the right corner of my screen :(
  Please help me, you have this problem for about a week now, I was just at my PC then suddenly descended from connection and everything was gone?
  Please help me to get fixed that problem judged 1000 forums!
  Hi gabrieldemirci,
  You mention that "I was just at my PC then suddenly descended from connection and everything was gone."
  Hear you errors are not displayed or you are unable to connect to the internet?
   
  Is the connection via cable or wireless? If it's wireless, try to connect with a cable and see if the problem is resolved.
  You can try these methods to check whether the problem is resolved.
  Method 1: Run the troubleshooters.
  http://Windows.Microsoft.com/en-in/Windows7/open-networking-troubleshooters
   
  Method 2: Perform a PING test.
  (a) type "Command Prompt" in the find and right-click on the result and click "Run as Administrator".
  (b) type "ping " (without the quotation marks or brackets) and press "Enter."

  (c) post the results here.

   
  Method 3: Updated network adapter drivers.
  Update the network adapter drivers on the site of system manufacturers.
  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab5&V3H=winvistatab1&v4h=winxptab1
   
  Method 4: Perform a system restore.
  If the problem occurred recently, you can perform a system restore.
  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore
   
  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

   

  For further reference if you can't connect to a network.

  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-I-connect-to-the-Internet

   
  Let us know if that helps.

• Question about the account administrator and access

  I am logged in as administrator, but when I try to access certain programs or files that I am refused access as a limited user.

  Can anyone help?

  Jon

  Hello

  You can access files or programs by making a 'right-click' on the file/shortcut and 'left click' on 'run as administrator '. ».

  Then, the application will run wirh maximum rights and full access.

  Welcome them

• user account - main 'administrator' acct has disappeared and I can't access my documents 'admin '.

  main account under XP pro since always 'administrator' put in place a new Admin account in Control Panel with the intention of transferring files in it, because I could not rename the original

  no other action - now since a restarted a few days later the Admin log you / account has disappeared and when I try to access the documents 'administrators' to the new user account with administrator privileges I get a message 'not available' - I NEED these files because they contain files of accounting for our local charity and supported last a disk separate until 3 weeks ago GULP!

  Hi Michaelthetruck,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you try the steps in the Microsoft Knowledge Base article and check.

  "Access denied" error message when you try to open a folder

  http://support.Microsoft.com/kb/810881

   

  Method 2: You can also take the owner of the file/folder, to steps, consult the following article:

   

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Let us know if that helps.

• Cannot see and navigate to "settings".

  My sanza clip + can only see and navigate to 'settings', I do not see the other parts of the menu. To try to restore by holding down the right power button turns the unit off. Any ideas?

  Connect it to your pc and reload the firmware.