Adobe 8.12 - printing to the LPT1 port error

Similar Questions

• Is it possible to redirect the LPT1: port to a usb port

  I have an old recipe BACK with tons of revenue program, as I walked. I so far have been able to use it and can still access the program and files, but he wants me to print to LPT1:. No problem until my older printers crapped out. Is it possible to redirect the LPT1: port to a network printer or the usb port.

  How to print from a program of 'BACK' in XP--> http://members.shaw.ca/bsanders/printfromdos.htm

• Is there a way to make the LPT1 port EPP in Windows?

  Original title: is there a way to make the LPT1 port EPP in Windows?

  I have some parallel setting in BIOS for EPP is selected. Device Manager he calls an ECP port. The device requires PPE runs correctly. Is there a way to make the LPT1 port EPP in Windows?

  Hi RonaldEchols,

  ·         What is the model number of the device (printer)?

  ·         You use what version of BIOS (Basic Input Output System) and the motherboard?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.

  WndOws XP install problems with Lexmark X 2480 printer no cd

  Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.  Downloaded, but prints blank pages.

  Hello, ColoChick,

  Your question must be posted in the hardware and drivers Forum.  Note the drop-down menus...

  http://answers.Microsoft.com/en-us/Windows/Forum/performance

  Search for drivers for your Lexmark printer.  The complete set is recommended for a full installation.

  http://support.Lexmark.com/index?http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480&focusedTab=downloads#2

  You can also try the universal print driver

  http://www1.Lexmark.com/en_US/software/UPD/index.shtml

  If possible, contact Lexmark for the installer of physical media (CD)

  Q: How can I contact the Lexmark parts?

  R: customer support is available Monday - Friday from 09:00 - 18:30 AND

  E-mail: * address email is removed from the privacy *
  Phone: 1-877-577-2787
  Fax: 1-800-258-4880

• When you use Adobe CreatePDF desktop printer where the files go?

  When you use Adobe CreatePDF desktop printer where the files go?

  The CreatePDF desktop printer is removed. Please visit https://forums.adobe.com/docs/DOC-5131 for more information.

• a hora to DOWNLOAD a test version Adobe muse, has half of the descarga me error sale 21

  a hora to DOWNLOAD a test version Adobe muse, has half of the descarga me error sale 21

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  When you go to chat, of course, will have to provide all the information that you have NOT provided here... like Mac or Windows and exactly what version of the operating system

• Can I connect printer to the usb port on the cable Modem CM100

  Hello

  This may seem like a stupid question, but here goes... I know that the usb port on my Linksys Cisco CM100 cable modem is an optional way to connect the modem to the computer. I wonder if I can use the usb port to connect my HP 1020 laser printer instead.

  The printer is not a network printer, and so I know that it may not work, but I have seen a few cases where a virtual port and install it as a local printer got to work.

  If I can connect the printer to the modem, and then he would give me a way to print from my laptop in the other room.  My printer is just beside my modem configuration and the router. I have a Linksys router WGR614 wireless who sees the devices on my network share, so I think he could see the printer connected to the modem (?)

  I couldn't find the answer to this anywhere. I didn't damage my equipment by blindly try this without knowing a little something. (I assume that the heart of my question is, on the CM100 usb port can be used for any usb device)?

  (I have Windows 7 64-bit operating system, in case you need to know).

  Thanks to anyone who can answer.

  djoseph

  A standard print server will allow you to connect a USB printer to your network. There are models wired and wireless depending on how you want to connect to the network.

• My TimeCapsule airport can not find my printer via the USB port

  Hello.

  I have a HP Laserjet cp1215.

  I had to reset my TimeCapsule because my Xbox has an update and will not connect to internet.

  Then theres no reaction when I connect my printer to the TimeCapsule.

  Any ideas?

  Thank you

  When you reset the TC which settings you changed?

  Have a different IP address?

  Remove the printer to the computer and start the installation... If the TC changes IP it can mess up the connection.

  In the contrary case, we need a lot more info about what happened and your entire network. Printers can be extremely difficult to get running... the end plug it into a computer as it was designed to be... A USB printer is not network... and no USB print server cannot overcome the fundamental nature of the printer... It is designed for local use. Ultimately, that he will always give you problems.

• Equium M50 will not recognize the LAN port - error: disconnected network cable

  I own a Toshiba Equium M50 and have problems with the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.

  I used to connect through a Modem/DSL switch "ADDON" and had no problems. I then replaced the ADDON with an ADSL Modem/Router "NETGEAR" DG834G to win the wireless port, and since that time my machine won't recognise the LAN port. .

  I know that cables are OK I used with other phones and had no problems. I can also plug a PCI card to connect without any problems. It seems to me that if the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller has a problem with the netgear Modem/Router.

  Anyone out there with a similar experience and some tips/suggestions?

  PLEASE

  Hello

  For me this doesn't show t as a problem of LAN card but your router is a problem.
  Check Device Manager if the network card is correctly recognized. If there is no yellow exclamation point, so all is ok!
  You can try to remove the network adapter from Device Manager and reboot after new install driver LAN again.

  The question has looked after installing or connecting the new Netgear modem router.
  I would recommend to check first the settings or update the firmware on this router.

  I found more useful websites
  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  http://www.experts-exchange.com/Networking/broadband/DSL_Cable/Q_20381405.html

• HP Deskjet 3545: hp deskjet 3545 my desktop pc does not connect to the printer via the usb port

  Hello

  I installed all the drivers and the software correctly and the printer can communicate with my desktop pc for problem analysis, but when I open an editor like notepad, word, write something in them or when I open a photo and when I try to print, it cannot communicate with the printer. I used same HP print and Scan Doctor in order to study the problem by clicking on the button "Correct the impression", in the program, he sees even my connected printer (usb) or same (LAN), but printing HP and Scan doctor after reviewing all the steps and ticks as ok, when he said "try to send the test page" and when he tries to send it to the printer It does not send and I choose "no print" to see which program will thus be, discover the program this time said "send the in-house test page", and I chose this option to send it internally and the printer works. The program says "there is a problem which can not find this application for assistance. try to uninstall and reinstall the drivers as an adviser"but I uninstalled and reinstalled the drivers and seems that there is no error, or any problem with the drivers, but seems that it cannot connect to the printer, even if I can use the scanner of my office and it connects to the printer without problem. What can be the problem? How can we solve this problem? any help would be appreciated. Thank you. Windows XP Professional Edition, 32-bit SP3 is installed on my desktop.

  Sincerely

  Hello metehangunaydin,

  Please try the procedure below so that you can at least be able to print.

  1. click on the Start button on the computer.
  2. then click on Control Panel.
  3. then printers and faxes
  4. in the top left, click on add a printer
  5. click Add a local printer
  6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
  "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

  Now try printing. It should work.

• plugged my printer on the usb port, but it can not find anywhere

  Lexmark Z1380 - do not have the disc, but it should work when I plug it into the port anyway. Windows Vista.

  Try to download the driver here:

  http://support.Lexmark.com/index?locale=en&page=product&ProductCode=LEXMARK_Z1380&segment=support&UserLocale=EN_UK&FromPage=null#2

• All-in-one OfficeJet 8600: printer to the computer scan error message

  Hello

  I'm on Windows 10 and have updated my HP drivers and I have NOT of PROBLEMS I scan a document to my computer.

  But I get, every so often, a message background - black disaster mistake, bright yellow triangle - who says my priner can not scan to my computer. There is no HP identifier on the message.

  It seems that some malware that missed Bitdefender. Any ideas on whereI can find and eliminate?

  Thank you

  Greg

  Valdavidian

  It is a mistake on the part of Windows. He thinks that the printer has lost the connection, when in fact, the connection is always ther.

  I have networked printers at home, and I usually see this message once a day.

  When I then click on the desktop icon to check the problem, the routine is able to communicate with the printer without any problems.

  My printers are connected by a cable to a switch ethernet, so I KNOW that the connection has not been ignored.

  It doesn't seem to be a way to STOP Windows generates this message.

• Cannot cancel the Word print job - the job status = error

  When you try to print from Word, I can't print because a previous task cannot print.  I tried to cancel the job, but the system will not delete it.

  I have sucessfully printed by e-mail since the former cannot print job, but I can't get this previous work to go.

  Here is a screenshot of the ePrint application that appears when I want to print in Word.

  

  Solved... just had to go into devices and printers, select the printer and cancel the job.

• Unable to print from the Internet, line error: 1791.

  Original title: Printint problem

  Until about two days ago, I was printing very well.  Now I can print office documents and a printer test page, but I can't print anything on the internet. The following statement keeps popping up.

  "An error has occurred in the script on this page".

  Online: 1791

  Char: 1

  Error: Invalid Argument

  Code: 0

  URL: res://ieframe.dll/preview.is

  I've updated everything, ran analyses of the complete run of performance system and stem from boredom

  Hello

  I would like to know more information on the issue, so that we can help you.

  1. what version of IE are you using?
  2 the question has started recently?
  3. have you made changes on the computer before this problem?

  I suggest to try the steps to resolve script errors in Internet Explorer and check to see if it works for you.

  How to resolve errors from script in Internet Explorer:
  http://support.Microsoft.com/kb/308260

  If this did not help, then try the procedure described in the following Microsoft Support article and check if that helps.

  Impossible to print or view the print preview of a Web page in Internet Explorer: http://support.microsoft.com/kb/973479

  Please respond with the State of the question, so that we could help you better.

• Print of the Macros VBA error Documents

  I use Robohelp 8 HTML. I create WebHelp and HTML Help. I have VISTA on my pc.

  I created a project and attempted to produce a .pdf of this version. However, I get an error message that Robohelp is unable to record macros VBA.

  I looked up VBA macros in Help and suggested that ensure I have all applied Microsoft downloads. If it has not corrected the problem to call Adobe Technical Support.

  I have a support call connected with the ATS, however, it has been more than 7 days. The only information they offer is that he was "moved" to senior technical support.

  Does anyone have experience with this? Ideas on how to fix it?

  
  Thank you.

  10570Fan

  What level of security you put for macros in Word? It should be low.

  Have you installed RH with the admin rights to your logon? Essential.

  See www.grainge.org for creating tips and RoboHelp

  Follow me @petergrainge